Message ID | 20221008181714.253634-1-konrad.dybcio@somainline.org (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | [v2] arm64: dts: qcom: sm8250-edo: Add NXP PN553 NFC | expand |
On 2022-10-08 20:17:13, Konrad Dybcio wrote: > Add a node for NXP PN553 NFC, using the nxp-nci driver. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> [On Sony Xperia 5 II, pdx206] Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > Changes since v1: > - dropped useless label > - use generic node name Thanks! > > arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi > index f7d7f502f48b..ae94065c6daa 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi > @@ -462,7 +462,16 @@ &i2c1 { > status = "okay"; > clock-frequency = <400000>; > > - /* NXP PN553 NFC @ 28 */ > + nfc@28 { > + compatible = "nxp,nxp-nci-i2c"; > + reg = <0x28>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <111 IRQ_TYPE_EDGE_RISING>; > + > + enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; > + firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + }; > }; > > &i2c2 { > -- > 2.37.3 >
On Sat, 8 Oct 2022 20:17:13 +0200, Konrad Dybcio wrote: > Add a node for NXP PN553 NFC, using the nxp-nci driver. > > Applied, thanks! [1/1] arm64: dts: qcom: sm8250-edo: Add NXP PN553 NFC commit: 37eac5a5fe27b1ab189d12064ffdd7db42f26900 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index f7d7f502f48b..ae94065c6daa 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -462,7 +462,16 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; - /* NXP PN553 NFC @ 28 */ + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <111 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + }; }; &i2c2 {
Add a node for NXP PN553 NFC, using the nxp-nci driver. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- Changes since v1: - dropped useless label - use generic node name arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)