| Message ID | 20221012030635.13140-1-wangkefeng.wang@huawei.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | [v2] clk: at91: fix the build with binutils 2.27 | expand |
On 2022/10/12 11:06, Kefeng Wang wrote: > There is an issue when build with older versions of binutils 2.27.0, > > arch/arm/mach-at91/pm_suspend.S: Assembler messages: > arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL' > > Use UL() macro to fix the issue in assembly file. > > Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60") > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> > --- > v2: use linux/bits.h instead of vdso/bits.h + Stephen > > include/linux/clk/at91_pmc.h | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h > index 3484309b59bf..7af499bdbecb 100644 > --- a/include/linux/clk/at91_pmc.h > +++ b/include/linux/clk/at91_pmc.h > @@ -12,6 +12,8 @@ > #ifndef AT91_PMC_H > #define AT91_PMC_H > > +#include <linux/bits.h> > + > #define AT91_PMC_V1 (1) /* PMC version 1 */ > #define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */ > > @@ -45,8 +47,8 @@ > #define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ > > #define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */ > -#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */ > -#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */ > +#define AT91_PMC_PLL_ACR_DEFAULT_UPLL UL(0x12020010) /* Default PLL ACR value for UPLL */ > +#define AT91_PMC_PLL_ACR_DEFAULT_PLLA UL(0x00020010) /* Default PLL ACR value for PLLA */ > #define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */ > #define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */ >
Quoting Kefeng Wang (2022-10-11 20:06:35) > There is an issue when build with older versions of binutils 2.27.0, > > arch/arm/mach-at91/pm_suspend.S: Assembler messages: > arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL' > > Use UL() macro to fix the issue in assembly file. > > Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60") > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> > --- Applied to clk-next
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h index 3484309b59bf..7af499bdbecb 100644 --- a/include/linux/clk/at91_pmc.h +++ b/include/linux/clk/at91_pmc.h @@ -12,6 +12,8 @@ #ifndef AT91_PMC_H #define AT91_PMC_H +#include <linux/bits.h> + #define AT91_PMC_V1 (1) /* PMC version 1 */ #define AT91_PMC_V2 (2) /* PMC version 2 [SAM9X60] */ @@ -45,8 +47,8 @@ #define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ #define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */ -#define AT91_PMC_PLL_ACR_DEFAULT_UPLL 0x12020010UL /* Default PLL ACR value for UPLL */ -#define AT91_PMC_PLL_ACR_DEFAULT_PLLA 0x00020010UL /* Default PLL ACR value for PLLA */ +#define AT91_PMC_PLL_ACR_DEFAULT_UPLL UL(0x12020010) /* Default PLL ACR value for UPLL */ +#define AT91_PMC_PLL_ACR_DEFAULT_PLLA UL(0x00020010) /* Default PLL ACR value for PLLA */ #define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */ #define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */
There is an issue when build with older versions of binutils 2.27.0, arch/arm/mach-at91/pm_suspend.S: Assembler messages: arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL' Use UL() macro to fix the issue in assembly file. Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> --- v2: use linux/bits.h instead of vdso/bits.h include/linux/clk/at91_pmc.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)