mbox series

[net-next,v4,0/3] net: WangXun txgbe ethernet driver

Message ID 20221012103533.738954-1-jiawenwu@trustnetic.com (mailing list archive)
Headers show
Series net: WangXun txgbe ethernet driver | expand

Message

Jiawen Wu Oct. 12, 2022, 10:35 a.m. UTC
This patch series adds support for WangXun 10 gigabit NIC, to initialize
hardware, set mac address, and register netdev.

Change log:
v4: address comments:
    Andrew Lunn: https://lore.kernel.org/all/YzXROBtztWopeeaA@lunn.ch/
v3: address comments:
    Andrew Lunn: remove hw function ops, reorder functions, use BIT(n)
                 for register bit offset, move the same code of txgbe
                 and ngbe to libwx
v2: address comments:
    Andrew Lunn: https://lore.kernel.org/netdev/YvRhld5rD%2FxgITEg@lunn.ch/

Jiawen Wu (3):
  net: txgbe: Store PCI info
  net: txgbe: Reset hardware
  net: txgbe: Set MAC address and register netdev

 drivers/net/ethernet/wangxun/Kconfig          |   6 +
 drivers/net/ethernet/wangxun/Makefile         |   1 +
 drivers/net/ethernet/wangxun/libwx/Makefile   |   7 +
 drivers/net/ethernet/wangxun/libwx/wx_hw.c    | 475 ++++++++++++++++++
 drivers/net/ethernet/wangxun/libwx/wx_hw.h    |  18 +
 drivers/net/ethernet/wangxun/libwx/wx_type.h  | 239 +++++++++
 drivers/net/ethernet/wangxun/txgbe/Makefile   |   3 +-
 drivers/net/ethernet/wangxun/txgbe/txgbe.h    |  22 +-
 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c |  99 ++++
 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h |   9 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   | 382 +++++++++++++-
 .../net/ethernet/wangxun/txgbe/txgbe_type.h   |  33 +-
 12 files changed, 1275 insertions(+), 19 deletions(-)
 create mode 100644 drivers/net/ethernet/wangxun/libwx/Makefile
 create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_hw.c
 create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_hw.h
 create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_type.h
 create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
 create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h

Comments

Jakub Kicinski Oct. 12, 2022, 3:49 p.m. UTC | #1
On Wed, 12 Oct 2022 18:35:30 +0800 Jiawen Wu wrote:
> This patch series adds support for WangXun 10 gigabit NIC, to initialize
> hardware, set mac address, and register netdev.

# Form letter - net-next is closed

We have already sent the networking pull request for 6.1
and therefore net-next is closed for new drivers, features,
code refactoring and optimizations. We are currently accepting
bug fixes only.

Please repost when net-next reopens after 6.1-rc1 is cut.

RFC patches sent for review only are obviously welcome at any time.