| Message ID | 20221009174052.1927483-10-netdev@kapio-technology.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Extend locked port feature with FDB locked flag (MAC-Auth/MAB) | expand |
On 2022-10-09 19:40, Hans J. Schultz wrote: > Verify that the MAC-Auth mechanism works by adding a FDB entry with the > locked flag set, denying access until the FDB entry is replaced with a > FDB entry without the locked flag set. > > Add test of blackhole fdb entries, verifying that there is no > forwarding > to a blackhole entry from any port, and that the blackhole entry can be > replaced. > Ido, have you had time to look at this patch set, and do I need to release a v8 to fix those two forgotten statics and maybe also this new switchcore driver that was not there when I posted this patch set?
On Sun, Oct 09, 2022 at 07:40:52PM +0200, Hans J. Schultz wrote: > +locked_port_mab() > +{ > + RET=0 > + check_port_mab_support || return 0 > + > + ping_do $h1 192.0.2.2 > + check_err $? "MAB: Ping did not work before locking port" > + > + bridge link set dev $swp1 locked on mab on > + > + ping_do $h1 192.0.2.2 > + check_fail $? "MAB: Ping worked on mab enabled port without FDB entry" > + > + bridge fdb get `mac_get $h1` vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "locked" > + check_err $? "MAB: No locked FDB entry after ping on mab enabled port" > + > + bridge fdb replace `mac_get $h1` dev $swp1 master static > + > + ping_do $h1 192.0.2.2 > + check_err $? "MAB: Ping did not work with FDB entry without locked flag" > + > + bridge fdb del `mac_get $h1` dev $swp1 master > + bridge link set dev $swp1 locked off mab off > + > + log_test "Locked port MAB" > +} > + > +# Check that entries cannot roam from an unlocked port to a locked port. > +locked_port_station_move() > +{ > + local mac=a0:b0:c0:c0:b0:a0 > + > + RET=0 > + check_locked_port_support || return 0 > + > + bridge link set dev $swp1 locked on learning on > + > + $MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand > + bridge fdb show dev $swp1 | grep -q $mac > + check_fail $? "Locked port station move: FDB entry on first injection" > + > + $MZ $h2 -q -c 5 -d 100msec -t udp -a $mac -b rand > + bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "master br0" > + check_err $? "Locked port station move: Entry not found on unlocked port" > + > + $MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand > + bridge fdb get $mac vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "master br0" > + check_fail $? "Locked port station move: entry roamed to locked port" > + > + bridge fdb del $mac vlan 1 dev $swp2 master > + bridge link set dev $swp1 locked off learning off > + > + log_test "Locked port station move" > +} > + > +# Roaming to and from a MAB enabled port should work if blackhole flag is not set > +locked_port_mab_station_move() > +{ > + local mac=10:20:30:30:20:10 > + > + RET=0 > + check_port_mab_support || return 0 > + > + bridge link set dev $swp1 locked on mab on > + > + $MZ $h1 -q -c 5 -d 100 mesc -t udp -a $mac -b rand > + if bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "blackhole"; then > + echo "SKIP: Roaming not possible with blackhole flag, skipping test..." > + bridge link set dev $swp1 locked off mab off > + return $ksft_skip > + fi > + > + bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked" > + check_err $? "MAB station move: no locked entry on first injection" > + > + $MZ $h2 -q -c 5 -d 100msec -t udp -a $mac -b rand > + bridge fdb get $mac vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "locked" > + check_fail $? "MAB station move: locked entry did not move" > + > + bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "locked" > + check_fail $? "MAB station move: roamed entry to unlocked port had locked flag on" > + > + bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "master br0" > + check_err $? "MAB station move: roamed entry not found" > + > + bridge fdb del $mac vlan 1 dev $swp2 master > + bridge link set dev $swp1 locked off mab off > + > + log_test "Locked port MAB station move" > +} Looks OK to me. I made some change to make sure we are using "bridge fdb get" in a consistent manner instead of relying on iproute2 dump output too much. Please consider including them in the next version. FYI, I ran your version and mine with veth pairs and both are OK. diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh index fbe558f25e44..f0bc0bcbc246 100755 --- a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh +++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh @@ -187,7 +187,7 @@ locked_port_mab() ping_do $h1 192.0.2.2 check_fail $? "MAB: Ping worked on mab enabled port without FDB entry" - bridge fdb get `mac_get $h1` vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "locked" + bridge fdb get `mac_get $h1` br br0 vlan 1 | grep "dev $swp1" | grep -q "locked" check_err $? "MAB: No locked FDB entry after ping on mab enabled port" bridge fdb replace `mac_get $h1` dev $swp1 master static @@ -212,15 +212,15 @@ locked_port_station_move() bridge link set dev $swp1 locked on learning on $MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand - bridge fdb show dev $swp1 | grep -q $mac + bridge fdb get $mac br br0 vlan 1 &> /dev/null check_fail $? "Locked port station move: FDB entry on first injection" $MZ $h2 -q -c 5 -d 100msec -t udp -a $mac -b rand - bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "master br0" + bridge fdb get $mac br br0 vlan 1 | grep -q "dev $swp2" check_err $? "Locked port station move: Entry not found on unlocked port" $MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand - bridge fdb get $mac vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "master br0" + bridge fdb get $mac br br0 vlan 1 | grep -q "dev $swp1" check_fail $? "Locked port station move: entry roamed to locked port" bridge fdb del $mac vlan 1 dev $swp2 master @@ -229,7 +229,8 @@ locked_port_station_move() log_test "Locked port station move" } -# Roaming to and from a MAB enabled port should work if blackhole flag is not set +# Check that entries can roam from a locked port if blackhole FDB flag is not +# set. locked_port_mab_station_move() { local mac=10:20:30:30:20:10 @@ -246,19 +247,16 @@ locked_port_mab_station_move() return $ksft_skip fi - bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked" + bridge fdb get $mac br br0 vlan 1 | grep "dev $swp1" | grep -q "locked" check_err $? "MAB station move: no locked entry on first injection" $MZ $h2 -q -c 5 -d 100msec -t udp -a $mac -b rand - bridge fdb get $mac vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "locked" - check_fail $? "MAB station move: locked entry did not move" + bridge fdb get $mac br br0 vlan 1 | grep -q "dev $swp2" + check_err $? "MAB station move: roamed entry not found" - bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "locked" + bridge fdb get $mac br br0 vlan 1 | grep -q "locked" check_fail $? "MAB station move: roamed entry to unlocked port had locked flag on" - bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "master br0" - check_err $? "MAB station move: roamed entry not found" - bridge fdb del $mac vlan 1 dev $swp2 master bridge link set dev $swp1 locked off mab off
On Sun, Oct 09, 2022 at 07:40:52PM +0200, Hans J. Schultz wrote: > +++ b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh > @@ -0,0 +1,134 @@ > +#!/bin/bash > +# SPDX-License-Identifier: GPL-2.0 > + > +ALL_TESTS="blackhole_fdb" > +NUM_NETIFS=4 > +source tc_common.sh > +source lib.sh > + > +h1_create() > +{ > + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 > + vlan_create $h1 100 v$h1 198.51.100.1/24 > +} > + > +h1_destroy() > +{ > + vlan_destroy $h1 100 > + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 > +} > + > +h2_create() > +{ > + simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 > + vlan_create $h2 100 v$h2 198.51.100.2/24 > +} > + > +h2_destroy() > +{ > + vlan_destroy $h2 100 > + simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 > +} There is unnecessary configuration here. Can be simplified: diff --git a/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh index 77d166180bc4..cc2145ea1968 100755 --- a/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh +++ b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh @@ -8,26 +8,22 @@ source lib.sh h1_create() { - simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 - vlan_create $h1 100 v$h1 198.51.100.1/24 + simple_if_init $h1 192.0.2.1/24 } h1_destroy() { - vlan_destroy $h1 100 - simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_fini $h1 192.0.2.1/24 } h2_create() { - simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 - vlan_create $h2 100 v$h2 198.51.100.2/24 + simple_if_init $h2 192.0.2.2/24 } h2_destroy() { - vlan_destroy $h2 100 - simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $h2 192.0.2.2/24 } switch_create() > + > +switch_create() > +{ > + ip link add dev br0 type bridge vlan_filtering 1 > + > + ip link set dev $swp1 master br0 > + ip link set dev $swp2 master br0 > + > + ip link set dev br0 up > + ip link set dev $swp1 up > + ip link set dev $swp2 up > + > + tc qdisc add dev $swp2 clsact > +} > + > +switch_destroy() > +{ > + tc qdisc del dev $swp2 clsact > + > + ip link set dev $swp2 down > + ip link set dev $swp1 down > + > + ip link del dev br0 > +} > + > +setup_prepare() > +{ > + h1=${NETIFS[p1]} > + swp1=${NETIFS[p2]} > + h2=${NETIFS[p3]} > + swp2=${NETIFS[p4]} > + > + vrf_prepare > + > + h1_create > + h2_create > + > + switch_create > +} > + > +cleanup() > +{ > + pre_cleanup > + > + switch_destroy > + > + h2_destroy > + h1_destroy > + > + vrf_cleanup > +} > + > +# Check that there is no egress with blackhole entry and that blackhole entries can be replaced Wrap this to 80 columns: # Check that there is no egress with blackhole entry and that blackhole entries # can be replaced. > +blackhole_fdb() > +{ > + RET=0 > + > + check_blackhole_fdb_support || return 0 > + > + tc filter add dev $swp2 egress protocol ip pref 1 handle 1 flower \ > + dst_ip 192.0.2.2 ip_proto udp dst_port 12345 action pass > + > + $MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \ > + -a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q > + > + tc_check_packets "dev $swp2 egress" 1 1 > + check_err $? "Packet not seen on egress before adding blackhole entry" > + > + bridge fdb replace `mac_get $h2` dev br0 blackhole vlan 1 > + bridge fdb get `mac_get $h2` br br0 | grep -q blackhole vlan 1 > + check_err $? "Blackhole entry not found" > + > + $MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \ > + -a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q > + > + tc_check_packets "dev $swp2 egress" 1 1 > + check_err $? "Packet seen on egress after adding blackhole entry" > + > + # Check blackhole entries can be replaced. > + bridge fdb replace `mac_get $h2` dev $swp2 master static vlan 1 > + bridge fdb get `mac_get $h2` br br0 | grep -q blackhole vlan 1 > + check_fail $? "Blackhole entry found after replacement" > + > + $MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \ > + -a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q > + > + tc_check_packets "dev $swp2 egress" 1 2 > + check_err $? "Packet not seen on egress after replacing blackhole entry" > + > + bridge fdb del `mac_get $h2` dev $swp2 master static vlan 1 > + tc filter del dev $swp2 egress protocol ip pref 1 handle 1 flower > + > + log_test "Blackhole FDB entry" > +} Tested with veth pairs. Looks OK to me.
On Wed, Oct 12, 2022 at 11:46:55AM +0200, netdev@kapio-technology.com wrote: > Ido, have you had time to look at this patch set, and do I need to release a > v8 to fix those two forgotten statics and maybe also this new switchcore > driver that was not there when I posted this patch set? I don't know which changes you are referring to, but v8 should incorporate all the changes requested so far. Do not post it as long as net-next is closed (unless marked as RFC): https://www.kernel.org/doc/html/latest/process/maintainer-netdev.html#how-often-do-changes-from-these-trees-make-it-to-the-mainline-linus-tree
On 2022-10-13 16:28, Ido Schimmel wrote: > On Wed, Oct 12, 2022 at 11:46:55AM +0200, netdev@kapio-technology.com > wrote: >> Ido, have you had time to look at this patch set, and do I need to >> release a >> v8 to fix those two forgotten statics and maybe also this new >> switchcore >> driver that was not there when I posted this patch set? > > I don't know which changes you are referring to, but v8 should > incorporate all the changes requested so far. Do not post it as long as > net-next is closed (unless marked as RFC): Ohh, I missed declaring two functions as static in chip.c, and unfortunately my compiler did not give me any warnings... What is the schedule for net-next to be open (I guess that it is closed as of now)? > > https://www.kernel.org/doc/html/latest/process/maintainer-netdev.html#how-often-do-changes-from-these-trees-make-it-to-the-mainline-linus-tree
On Thu, Oct 13, 2022 at 05:17:42PM +0200, netdev@kapio-technology.com wrote: > What is the schedule for net-next to be open (I guess that it is closed as > of now)? After the merge window closes and 6.1-rc1 is released. Probably on Monday.
diff --git a/tools/testing/selftests/drivers/net/dsa/Makefile b/tools/testing/selftests/drivers/net/dsa/Makefile index c393e7b73805..c0a75d869763 100644 --- a/tools/testing/selftests/drivers/net/dsa/Makefile +++ b/tools/testing/selftests/drivers/net/dsa/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ OR MIT TEST_PROGS = bridge_locked_port.sh \ + bridge_blackhole_fdb.sh \ bridge_mdb.sh \ bridge_mld.sh \ bridge_vlan_aware.sh \ diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index a9c5c1be5088..7d832020937f 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ OR MIT TEST_PROGS = bridge_igmp.sh \ + bridge_blackhole_fdb.sh \ bridge_locked_port.sh \ bridge_mdb.sh \ bridge_mdb_port_down.sh \ diff --git a/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh new file mode 100755 index 000000000000..77d166180bc4 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh @@ -0,0 +1,134 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS="blackhole_fdb" +NUM_NETIFS=4 +source tc_common.sh +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 + vlan_create $h1 100 v$h1 198.51.100.1/24 +} + +h1_destroy() +{ + vlan_destroy $h1 100 + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 + vlan_create $h2 100 v$h2 198.51.100.2/24 +} + +h2_destroy() +{ + vlan_destroy $h2 100 + simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up + + tc qdisc add dev $swp2 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp2 clsact + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + h2=${NETIFS[p3]} + swp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +# Check that there is no egress with blackhole entry and that blackhole entries can be replaced +blackhole_fdb() +{ + RET=0 + + check_blackhole_fdb_support || return 0 + + tc filter add dev $swp2 egress protocol ip pref 1 handle 1 flower \ + dst_ip 192.0.2.2 ip_proto udp dst_port 12345 action pass + + $MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \ + -a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q + + tc_check_packets "dev $swp2 egress" 1 1 + check_err $? "Packet not seen on egress before adding blackhole entry" + + bridge fdb replace `mac_get $h2` dev br0 blackhole + bridge fdb get `mac_get $h2` br br0 | grep -q blackhole + check_err $? "Blackhole entry not found" + + $MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \ + -a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q + + tc_check_packets "dev $swp2 egress" 1 1 + check_err $? "Packet seen on egress after adding blackhole entry" + + # Check blackhole entries can be replaced. + bridge fdb replace `mac_get $h2` dev $swp2 master static + bridge fdb get `mac_get $h2` br br0 | grep -q blackhole + check_fail $? "Blackhole entry found after replacement" + + $MZ $h1 -c 1 -p 128 -t udp "sp=54321,dp=12345" \ + -a own -b `mac_get $h2` -A 192.0.2.1 -B 192.0.2.2 -q + + tc_check_packets "dev $swp2 egress" 1 2 + check_err $? "Packet not seen on egress after replacing blackhole entry" + + bridge fdb del `mac_get $h2` dev $swp2 master static + tc filter del dev $swp2 egress protocol ip pref 1 handle 1 flower + + log_test "Blackhole FDB entry" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh index 5b02b6b60ce7..fbe558f25e44 100755 --- a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh +++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh @@ -1,7 +1,15 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="locked_port_ipv4 locked_port_ipv6 locked_port_vlan" +ALL_TESTS=" + locked_port_ipv4 + locked_port_ipv6 + locked_port_vlan + locked_port_mab + locked_port_station_move + locked_port_mab_station_move +" + NUM_NETIFS=4 CHECK_TC="no" source lib.sh @@ -166,6 +174,97 @@ locked_port_ipv6() log_test "Locked port ipv6" } +locked_port_mab() +{ + RET=0 + check_port_mab_support || return 0 + + ping_do $h1 192.0.2.2 + check_err $? "MAB: Ping did not work before locking port" + + bridge link set dev $swp1 locked on mab on + + ping_do $h1 192.0.2.2 + check_fail $? "MAB: Ping worked on mab enabled port without FDB entry" + + bridge fdb get `mac_get $h1` vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "locked" + check_err $? "MAB: No locked FDB entry after ping on mab enabled port" + + bridge fdb replace `mac_get $h1` dev $swp1 master static + + ping_do $h1 192.0.2.2 + check_err $? "MAB: Ping did not work with FDB entry without locked flag" + + bridge fdb del `mac_get $h1` dev $swp1 master + bridge link set dev $swp1 locked off mab off + + log_test "Locked port MAB" +} + +# Check that entries cannot roam from an unlocked port to a locked port. +locked_port_station_move() +{ + local mac=a0:b0:c0:c0:b0:a0 + + RET=0 + check_locked_port_support || return 0 + + bridge link set dev $swp1 locked on learning on + + $MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand + bridge fdb show dev $swp1 | grep -q $mac + check_fail $? "Locked port station move: FDB entry on first injection" + + $MZ $h2 -q -c 5 -d 100msec -t udp -a $mac -b rand + bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "master br0" + check_err $? "Locked port station move: Entry not found on unlocked port" + + $MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand + bridge fdb get $mac vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "master br0" + check_fail $? "Locked port station move: entry roamed to locked port" + + bridge fdb del $mac vlan 1 dev $swp2 master + bridge link set dev $swp1 locked off learning off + + log_test "Locked port station move" +} + +# Roaming to and from a MAB enabled port should work if blackhole flag is not set +locked_port_mab_station_move() +{ + local mac=10:20:30:30:20:10 + + RET=0 + check_port_mab_support || return 0 + + bridge link set dev $swp1 locked on mab on + + $MZ $h1 -q -c 5 -d 100 mesc -t udp -a $mac -b rand + if bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "blackhole"; then + echo "SKIP: Roaming not possible with blackhole flag, skipping test..." + bridge link set dev $swp1 locked off mab off + return $ksft_skip + fi + + bridge fdb show dev $swp1 | grep "$mac vlan 1" | grep -q "locked" + check_err $? "MAB station move: no locked entry on first injection" + + $MZ $h2 -q -c 5 -d 100msec -t udp -a $mac -b rand + bridge fdb get $mac vlan 1 dev $swp1 | grep "dev $swp1 vlan 1" | grep -q "locked" + check_fail $? "MAB station move: locked entry did not move" + + bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "locked" + check_fail $? "MAB station move: roamed entry to unlocked port had locked flag on" + + bridge fdb get $mac vlan 1 dev $swp2 | grep "dev $swp2 vlan 1" | grep -q "master br0" + check_err $? "MAB station move: roamed entry not found" + + bridge fdb del $mac vlan 1 dev $swp2 master + bridge link set dev $swp1 locked off mab off + + log_test "Locked port MAB station move" +} + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 3ffb9d6c0950..d6abe873665c 100755 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -137,6 +137,23 @@ check_locked_port_support() fi } +check_port_mab_support() +{ + if ! bridge -d link show | grep -q "mab"; then + echo "SKIP: iproute2 too old; MacAuth feature not supported." + return $ksft_skip + fi +} + +check_blackhole_fdb_support() +{ + bridge fdb help 2>&1|grep blackhole &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: Blackhole fdb feature not supported." + return $ksft_skip + fi +} + if [[ "$(id -u)" -ne 0 ]]; then echo "SKIP: need root privileges" exit $ksft_skip
Verify that the MAC-Auth mechanism works by adding a FDB entry with the locked flag set, denying access until the FDB entry is replaced with a FDB entry without the locked flag set. Add test of blackhole fdb entries, verifying that there is no forwarding to a blackhole entry from any port, and that the blackhole entry can be replaced. Also add a test that verifies that sticky FDB entries cannot roam (this is not needed for now, but should in general be present anyhow for future applications). Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> --- .../selftests/drivers/net/dsa/Makefile | 1 + .../testing/selftests/net/forwarding/Makefile | 1 + .../net/forwarding/bridge_blackhole_fdb.sh | 134 ++++++++++++++++++ .../net/forwarding/bridge_locked_port.sh | 101 ++++++++++++- tools/testing/selftests/net/forwarding/lib.sh | 17 +++ 5 files changed, 253 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/forwarding/bridge_blackhole_fdb.sh