| Message ID | 20221017233510.53336-1-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | d182c2e1bc92084c038b44c618f29589a4de9f66 |
| Headers | show |
| Series | [v1,1/1] usb: dwc3: Don't switch OTG -> peripheral if extcon is present | expand |
Hi Andy, On 10/17/22 6:35 PM, Andy Shevchenko wrote: > From: Andrey Smirnov <andrew.smirnov@gmail.com> > > If the extcon device exists, get the mode from the extcon device. If > the controller is DRD and the driver is unable to determine the mode, > only then default the dr_mode to USB_DR_MODE_PERIPHERAL. > > Reported-by: Steev Klimaszewski <steev@kali.org> > Fixes: 7a84e7353e23 ("Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"") > Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- > drivers/usb/dwc3/core.c | 49 +++++++++++++++++++++++++++++++++++++++- > drivers/usb/dwc3/drd.c | 50 ----------------------------------------- > 2 files changed, 48 insertions(+), 51 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index ea51624461b5..c0e7c76dc5c8 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -23,6 +23,7 @@ > #include <linux/delay.h> > #include <linux/dma-mapping.h> > #include <linux/of.h> > +#include <linux/of_graph.h> > #include <linux/acpi.h> > #include <linux/pinctrl/consumer.h> > #include <linux/reset.h> > @@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) > * mode. If the controller supports DRD but the dr_mode is not > * specified or set to OTG, then set the mode to peripheral. > */ > - if (mode == USB_DR_MODE_OTG && > + if (mode == USB_DR_MODE_OTG && !dwc->edev && > (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) || > !device_property_read_bool(dwc->dev, "usb-role-switch")) && > !DWC3_VER_IS_PRIOR(DWC3, 330A)) > @@ -1690,6 +1691,46 @@ static void dwc3_check_params(struct dwc3 *dwc) > } > } > > +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) > +{ > + struct device *dev = dwc->dev; > + struct device_node *np_phy; > + struct extcon_dev *edev = NULL; > + const char *name; > + > + if (device_property_read_bool(dev, "extcon")) > + return extcon_get_edev_by_phandle(dev, 0); > + > + /* > + * Device tree platforms should get extcon via phandle. > + * On ACPI platforms, we get the name from a device property. > + * This device property is for kernel internal use only and > + * is expected to be set by the glue code. > + */ > + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) > + return extcon_get_extcon_dev(name); > + > + /* > + * Try to get an extcon device from the USB PHY controller's "port" > + * node. Check if it has the "port" node first, to avoid printing the > + * error message from underlying code, as it's a valid case: extcon > + * device (and "port" node) may be missing in case of "usb-role-switch" > + * or OTG mode. > + */ > + np_phy = of_parse_phandle(dev->of_node, "phys", 0); > + if (of_graph_is_present(np_phy)) { > + struct device_node *np_conn; > + > + np_conn = of_graph_get_remote_node(np_phy, -1, -1); > + if (np_conn) > + edev = extcon_find_edev_by_node(np_conn); > + of_node_put(np_conn); > + } > + of_node_put(np_phy); > + > + return edev; > +} > + > static int dwc3_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -1840,6 +1881,12 @@ static int dwc3_probe(struct platform_device *pdev) > goto err2; > } > > + dwc->edev = dwc3_get_extcon(dwc); > + if (IS_ERR(dwc->edev)) { > + ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n"); > + goto err3; > + } > + > ret = dwc3_get_dr_mode(dwc); > if (ret) > goto err3; > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c > index 8cad9e7d3368..039bf241769a 100644 > --- a/drivers/usb/dwc3/drd.c > +++ b/drivers/usb/dwc3/drd.c > @@ -8,7 +8,6 @@ > */ > > #include <linux/extcon.h> > -#include <linux/of_graph.h> > #include <linux/of_platform.h> > #include <linux/platform_device.h> > #include <linux/property.h> > @@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb, > return NOTIFY_DONE; > } > > -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) > -{ > - struct device *dev = dwc->dev; > - struct device_node *np_phy; > - struct extcon_dev *edev = NULL; > - const char *name; > - > - if (device_property_read_bool(dev, "extcon")) > - return extcon_get_edev_by_phandle(dev, 0); > - > - /* > - * Device tree platforms should get extcon via phandle. > - * On ACPI platforms, we get the name from a device property. > - * This device property is for kernel internal use only and > - * is expected to be set by the glue code. > - */ > - if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { > - edev = extcon_get_extcon_dev(name); > - if (!edev) > - return ERR_PTR(-EPROBE_DEFER); > - > - return edev; > - } > - > - /* > - * Try to get an extcon device from the USB PHY controller's "port" > - * node. Check if it has the "port" node first, to avoid printing the > - * error message from underlying code, as it's a valid case: extcon > - * device (and "port" node) may be missing in case of "usb-role-switch" > - * or OTG mode. > - */ > - np_phy = of_parse_phandle(dev->of_node, "phys", 0); > - if (of_graph_is_present(np_phy)) { > - struct device_node *np_conn; > - > - np_conn = of_graph_get_remote_node(np_phy, -1, -1); > - if (np_conn) > - edev = extcon_find_edev_by_node(np_conn); > - of_node_put(np_conn); > - } > - of_node_put(np_phy); > - > - return edev; > -} > - > #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH) > #define ROLE_SWITCH 1 > static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, > @@ -588,10 +542,6 @@ int dwc3_drd_init(struct dwc3 *dwc) > device_property_read_bool(dwc->dev, "usb-role-switch")) > return dwc3_setup_role_switch(dwc); > > - dwc->edev = dwc3_get_extcon(dwc); > - if (IS_ERR(dwc->edev)) > - return PTR_ERR(dwc->edev); > - > if (dwc->edev) { > dwc->edev_nb.notifier_call = dwc3_drd_notifier; > ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, Thank you for the quick fix! Confirmed that this works for me on my Lenovo Yoga C630 Tested-by: Steev Klimaszewski <steev@kali.org>
On Tue, Oct 18, 2022, Andy Shevchenko wrote: > From: Andrey Smirnov <andrew.smirnov@gmail.com> > > If the extcon device exists, get the mode from the extcon device. If > the controller is DRD and the driver is unable to determine the mode, > only then default the dr_mode to USB_DR_MODE_PERIPHERAL. > > Reported-by: Steev Klimaszewski <steev@kali.org> > Fixes: 7a84e7353e23 ("Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"") > Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- > drivers/usb/dwc3/core.c | 49 +++++++++++++++++++++++++++++++++++++++- > drivers/usb/dwc3/drd.c | 50 ----------------------------------------- > 2 files changed, 48 insertions(+), 51 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index ea51624461b5..c0e7c76dc5c8 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -23,6 +23,7 @@ > #include <linux/delay.h> > #include <linux/dma-mapping.h> > #include <linux/of.h> > +#include <linux/of_graph.h> > #include <linux/acpi.h> > #include <linux/pinctrl/consumer.h> > #include <linux/reset.h> > @@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) > * mode. If the controller supports DRD but the dr_mode is not > * specified or set to OTG, then set the mode to peripheral. > */ > - if (mode == USB_DR_MODE_OTG && > + if (mode == USB_DR_MODE_OTG && !dwc->edev && > (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) || > !device_property_read_bool(dwc->dev, "usb-role-switch")) && > !DWC3_VER_IS_PRIOR(DWC3, 330A)) > @@ -1690,6 +1691,46 @@ static void dwc3_check_params(struct dwc3 *dwc) > } > } > > +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) > +{ > + struct device *dev = dwc->dev; > + struct device_node *np_phy; > + struct extcon_dev *edev = NULL; > + const char *name; > + > + if (device_property_read_bool(dev, "extcon")) > + return extcon_get_edev_by_phandle(dev, 0); > + > + /* > + * Device tree platforms should get extcon via phandle. > + * On ACPI platforms, we get the name from a device property. > + * This device property is for kernel internal use only and > + * is expected to be set by the glue code. > + */ > + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) > + return extcon_get_extcon_dev(name); > + > + /* > + * Try to get an extcon device from the USB PHY controller's "port" > + * node. Check if it has the "port" node first, to avoid printing the > + * error message from underlying code, as it's a valid case: extcon > + * device (and "port" node) may be missing in case of "usb-role-switch" > + * or OTG mode. > + */ > + np_phy = of_parse_phandle(dev->of_node, "phys", 0); > + if (of_graph_is_present(np_phy)) { > + struct device_node *np_conn; > + > + np_conn = of_graph_get_remote_node(np_phy, -1, -1); > + if (np_conn) > + edev = extcon_find_edev_by_node(np_conn); > + of_node_put(np_conn); > + } > + of_node_put(np_phy); > + > + return edev; > +} > + > static int dwc3_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -1840,6 +1881,12 @@ static int dwc3_probe(struct platform_device *pdev) > goto err2; > } > > + dwc->edev = dwc3_get_extcon(dwc); > + if (IS_ERR(dwc->edev)) { > + ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n"); > + goto err3; > + } > + > ret = dwc3_get_dr_mode(dwc); > if (ret) > goto err3; > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c > index 8cad9e7d3368..039bf241769a 100644 > --- a/drivers/usb/dwc3/drd.c > +++ b/drivers/usb/dwc3/drd.c > @@ -8,7 +8,6 @@ > */ > > #include <linux/extcon.h> > -#include <linux/of_graph.h> > #include <linux/of_platform.h> > #include <linux/platform_device.h> > #include <linux/property.h> > @@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb, > return NOTIFY_DONE; > } > > -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) > -{ > - struct device *dev = dwc->dev; > - struct device_node *np_phy; > - struct extcon_dev *edev = NULL; > - const char *name; > - > - if (device_property_read_bool(dev, "extcon")) > - return extcon_get_edev_by_phandle(dev, 0); > - > - /* > - * Device tree platforms should get extcon via phandle. > - * On ACPI platforms, we get the name from a device property. > - * This device property is for kernel internal use only and > - * is expected to be set by the glue code. > - */ > - if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { > - edev = extcon_get_extcon_dev(name); > - if (!edev) > - return ERR_PTR(-EPROBE_DEFER); > - > - return edev; > - } > - > - /* > - * Try to get an extcon device from the USB PHY controller's "port" > - * node. Check if it has the "port" node first, to avoid printing the > - * error message from underlying code, as it's a valid case: extcon > - * device (and "port" node) may be missing in case of "usb-role-switch" > - * or OTG mode. > - */ > - np_phy = of_parse_phandle(dev->of_node, "phys", 0); > - if (of_graph_is_present(np_phy)) { > - struct device_node *np_conn; > - > - np_conn = of_graph_get_remote_node(np_phy, -1, -1); > - if (np_conn) > - edev = extcon_find_edev_by_node(np_conn); > - of_node_put(np_conn); > - } > - of_node_put(np_phy); > - > - return edev; > -} > - > #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH) > #define ROLE_SWITCH 1 > static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, > @@ -588,10 +542,6 @@ int dwc3_drd_init(struct dwc3 *dwc) > device_property_read_bool(dwc->dev, "usb-role-switch")) > return dwc3_setup_role_switch(dwc); > > - dwc->edev = dwc3_get_extcon(dwc); > - if (IS_ERR(dwc->edev)) > - return PTR_ERR(dwc->edev); > - > if (dwc->edev) { > dwc->edev_nb.notifier_call = dwc3_drd_notifier; > ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, > -- > 2.35.1 > Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Thanks, Thinh
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ea51624461b5..c0e7c76dc5c8 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -23,6 +23,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/of.h> +#include <linux/of_graph.h> #include <linux/acpi.h> #include <linux/pinctrl/consumer.h> #include <linux/reset.h> @@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) * mode. If the controller supports DRD but the dr_mode is not * specified or set to OTG, then set the mode to peripheral. */ - if (mode == USB_DR_MODE_OTG && + if (mode == USB_DR_MODE_OTG && !dwc->edev && (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) || !device_property_read_bool(dwc->dev, "usb-role-switch")) && !DWC3_VER_IS_PRIOR(DWC3, 330A)) @@ -1690,6 +1691,46 @@ static void dwc3_check_params(struct dwc3 *dwc) } } +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + struct device_node *np_phy; + struct extcon_dev *edev = NULL; + const char *name; + + if (device_property_read_bool(dev, "extcon")) + return extcon_get_edev_by_phandle(dev, 0); + + /* + * Device tree platforms should get extcon via phandle. + * On ACPI platforms, we get the name from a device property. + * This device property is for kernel internal use only and + * is expected to be set by the glue code. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) + return extcon_get_extcon_dev(name); + + /* + * Try to get an extcon device from the USB PHY controller's "port" + * node. Check if it has the "port" node first, to avoid printing the + * error message from underlying code, as it's a valid case: extcon + * device (and "port" node) may be missing in case of "usb-role-switch" + * or OTG mode. + */ + np_phy = of_parse_phandle(dev->of_node, "phys", 0); + if (of_graph_is_present(np_phy)) { + struct device_node *np_conn; + + np_conn = of_graph_get_remote_node(np_phy, -1, -1); + if (np_conn) + edev = extcon_find_edev_by_node(np_conn); + of_node_put(np_conn); + } + of_node_put(np_phy); + + return edev; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1840,6 +1881,12 @@ static int dwc3_probe(struct platform_device *pdev) goto err2; } + dwc->edev = dwc3_get_extcon(dwc); + if (IS_ERR(dwc->edev)) { + ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n"); + goto err3; + } + ret = dwc3_get_dr_mode(dwc); if (ret) goto err3; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 8cad9e7d3368..039bf241769a 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -8,7 +8,6 @@ */ #include <linux/extcon.h> -#include <linux/of_graph.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/property.h> @@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb, return NOTIFY_DONE; } -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) -{ - struct device *dev = dwc->dev; - struct device_node *np_phy; - struct extcon_dev *edev = NULL; - const char *name; - - if (device_property_read_bool(dev, "extcon")) - return extcon_get_edev_by_phandle(dev, 0); - - /* - * Device tree platforms should get extcon via phandle. - * On ACPI platforms, we get the name from a device property. - * This device property is for kernel internal use only and - * is expected to be set by the glue code. - */ - if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { - edev = extcon_get_extcon_dev(name); - if (!edev) - return ERR_PTR(-EPROBE_DEFER); - - return edev; - } - - /* - * Try to get an extcon device from the USB PHY controller's "port" - * node. Check if it has the "port" node first, to avoid printing the - * error message from underlying code, as it's a valid case: extcon - * device (and "port" node) may be missing in case of "usb-role-switch" - * or OTG mode. - */ - np_phy = of_parse_phandle(dev->of_node, "phys", 0); - if (of_graph_is_present(np_phy)) { - struct device_node *np_conn; - - np_conn = of_graph_get_remote_node(np_phy, -1, -1); - if (np_conn) - edev = extcon_find_edev_by_node(np_conn); - of_node_put(np_conn); - } - of_node_put(np_phy); - - return edev; -} - #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH) #define ROLE_SWITCH 1 static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, @@ -588,10 +542,6 @@ int dwc3_drd_init(struct dwc3 *dwc) device_property_read_bool(dwc->dev, "usb-role-switch")) return dwc3_setup_role_switch(dwc); - dwc->edev = dwc3_get_extcon(dwc); - if (IS_ERR(dwc->edev)) - return PTR_ERR(dwc->edev); - if (dwc->edev) { dwc->edev_nb.notifier_call = dwc3_drd_notifier; ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,