| Message ID | 20220921004741.152765-1-konrad.dybcio@somainline.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | arm64: dts: qcom: msm8998-yoshino: Fix up SMD regulators formatting | expand |
On 21/09/2022 02:47, Konrad Dybcio wrote: > Add a new line between each subnode and make the { } consistent. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 33 ++++++++++++++++++- > 1 file changed, 32 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi > index d08639082247..862d859af885 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi > @@ -410,131 +410,162 @@ vreg_s3a_1p35: s3 { > regulator-min-microvolt = <1352000>; > regulator-max-microvolt = <1352000>; > }; > + > vreg_s4a_1p8: s4 { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > regulator-system-load = <100000>; > regulator-allow-set-load; > }; > + > vreg_s5a_2p04: s5 { > regulator-min-microvolt = <1904000>; > regulator-max-microvolt = <2032000>; > }; > + > vreg_s7a_1p025: s7 { > regulator-min-microvolt = <900000>; > regulator-max-microvolt = <1028000>; > }; > + > vreg_l1a_0p875: l1 { > regulator-min-microvolt = <880000>; > regulator-max-microvolt = <880000>; > regulator-system-load = <73400>; > regulator-allow-set-load; > }; > + > vreg_l2a_1p2: l2 { > regulator-min-microvolt = <1200000>; > regulator-max-microvolt = <1200000>; > regulator-system-load = <12560>; > regulator-allow-set-load; > }; > + > vreg_l3a_1p0: l3 { > regulator-min-microvolt = <1000000>; > regulator-max-microvolt = <1000000>; > }; > + > vreg_l5a_0p8: l5 { > regulator-min-microvolt = <800000>; > regulator-max-microvolt = <800000>; > }; > + > vreg_l6a_1p8: l6 { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > }; > + > vreg_l7a_1p8: l7 { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > }; > + > vreg_l8a_1p2: l8 { > regulator-min-microvolt = <1200000>; > regulator-max-microvolt = <1200000>; > }; > + > vreg_l9a_1p8: l9 { > regulator-min-microvolt = <1808000>; > regulator-max-microvolt = <2960000>; > }; > + > vreg_l10a_1p8: l10 { > regulator-min-microvolt = <1808000>; > regulator-max-microvolt = <2960000>; > }; > + > vreg_l11a_1p0: l11 { > regulator-min-microvolt = <1000000>; > regulator-max-microvolt = <1000000>; > }; > + > vreg_l12a_1p8: l12 { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > }; > + > vreg_l13a_2p95: l13 { > regulator-min-microvolt = <1808000>; > regulator-max-microvolt = <2960000>; > regulator-allow-set-load; > }; > + > vreg_l14a_1p85: l14 { > regulator-min-microvolt = <1848000>; > regulator-max-microvolt = <1856000>; > regulator-system-load = <32000>; > regulator-allow-set-load; > }; > + > vreg_l15a_1p8: l15 { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > }; > + > vreg_l16a_2p7: l16 { > regulator-min-microvolt = <2704000>; > regulator-max-microvolt = <2704000>; > }; > + > vreg_l17a_1p3: l17 { > regulator-min-microvolt = <1304000>; > regulator-max-microvolt = <1304000>; > }; > - vreg_l18a_2p85: l18 {}; > + > + vreg_l18a_2p85: l18 { }; > + > vreg_l19a_2p7: l19 { > regulator-min-microvolt = <2696000>; > regulator-max-microvolt = <2704000>; > }; > + > vreg_l20a_2p95: l20 { > regulator-min-microvolt = <2960000>; > regulator-max-microvolt = <2960000>; > regulator-system-load = <10000>; > regulator-allow-set-load; > }; > + > vreg_l21a_2p95: l21 { > regulator-min-microvolt = <2960000>; > regulator-max-microvolt = <2960000>; > regulator-system-load = <800000>; > regulator-allow-set-load; > }; > + > vreg_l22a_2p85: l22 { }; > + > vreg_l23a_3p3: l23 { > regulator-min-microvolt = <3312000>; > regulator-max-microvolt = <3312000>; > }; > + > vreg_l24a_3p075: l24 { > regulator-min-microvolt = <3088000>; > regulator-max-microvolt = <3088000>; > }; > + > vreg_l25a_3p3: l25 { > regulator-min-microvolt = <3104000>; > regulator-max-microvolt = <3312000>; > }; > + > vreg_l26a_1p2: l26 { > regulator-min-microvolt = <1200000>; > regulator-max-microvolt = <1200000>; > regulator-allow-set-load; > }; > + > vreg_l28_3p0: l28 { > regulator-min-microvolt = <3000000>; > regulator-max-microvolt = <3000000>; > }; > + > vreg_lvs1a_1p8: lvs1 { }; > + > vreg_lvs2a_1p8: lvs2 { }; > }; > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On 21/09/2022 02:47, Konrad Dybcio wrote: > Add a new line between each subnode and make the { } consistent. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 33 ++++++++++++++++++- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Wed, 21 Sep 2022 02:47:41 +0200, Konrad Dybcio wrote: > Add a new line between each subnode and make the { } consistent. > > Applied, thanks! [1/1] arm64: dts: qcom: msm8998-yoshino: Fix up SMD regulators formatting commit: 732479bda06e1dfe5f46bfc682d94f40dff0af1f Best regards,
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index d08639082247..862d859af885 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -410,131 +410,162 @@ vreg_s3a_1p35: s3 { regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-system-load = <100000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2032000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-system-load = <73400>; regulator-allow-set-load; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-system-load = <12560>; regulator-allow-set-load; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; + vreg_l14a_1p85: l14 { regulator-min-microvolt = <1848000>; regulator-max-microvolt = <1856000>; regulator-system-load = <32000>; regulator-allow-set-load; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; - vreg_l18a_2p85: l18 {}; + + vreg_l18a_2p85: l18 { }; + vreg_l19a_2p7: l19 { regulator-min-microvolt = <2696000>; regulator-max-microvolt = <2704000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <10000>; regulator-allow-set-load; }; + vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <800000>; regulator-allow-set-load; }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; };
Add a new line between each subnode and make the { } consistent. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 33 ++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)