| Message ID | 20221020161401.941927-1-svv@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Jiri Kosina |
| Headers | show |
| Series | Add rumble support to latest xbox controllers | expand |
On Thu, 2022-10-20 at 09:14 -0700, Siarhei Vishniakou wrote: > Currently, rumble is only supported via bluetooth on a single xbox > controller, called 'model 1708'. On the back of the device, it's > named > 'wireless controller for xbox one'. However, in 2021, Microsoft > released > a firmware update for this controller. As part of this update, the > HID > descriptor of the device changed. The product ID was also changed > from > 0x02fd to 0x0b20. On this controller, rumble was supported via > hid-microsoft, which matched against the old product id (0x02fd). As > a > result, the firmware update broke rumble support on this controller. > > The hid-microsoft driver actually supports rumble on the new > firmware, > as well. So simply adding new product id is sufficient to bring back > this support. > > After discussing further with the xbox team, it was pointed out that > other xbox controllers, such as xbox elite, should also be possible > to > support in a similar way. However, I could only verify this on 2 > controllers so far. > > In this patch, add rumble support for the following 2 controllers: > 1. 'wireless controller for xbox one', model 1708, after applying the > most recent firmware update as of 2022-10-20. > 2. 'xbox wireless controller', model 1914. This is also sometimes > referred to as 'xbox series S|X'. This is a good summary of the different models: https://en.wikipedia.org/wiki/Xbox_Wireless_Controller#Summary You can remove the mention of the other names it might have, or the names at the back of the joypad, and use the model numbers instead. I think I have a model of each one of the devices in the list (except 1797 and 1537 IIRC), so I could test this if needed. Do you have a good test case for the various forces of rumble that would exercise both motors?
Hi Bastien, I prefer to keep the various names in the commit message, just so that it's easier to find the commit later when searching for the patch. I found that various teams refer to various controllers in a different way. Happy to rename the variables in the code, though. How about something like: USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708 USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708_FIRMWARE_2021 USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1914 ? I tested this on an Android device, with a simple rumble test app that I wrote. A better way would probably be to write some EV_FF events to /dev/input/eventX node. You could try the "python-evdev" module, which provides a sample rumble script: https://python-evdev.readthedocs.io/en/latest/tutorial.html#injecting-an-ff-event-into-first-ff-capable-device-found I haven't tried that since there's no python on Android. Here's the list of controllers where this could also work: Controller VID PID Classic/BLE Xbox One S 0x045E 0x02E0 Classic Xbox One S 0x045E 0x02FD Classic Xbox One S 0x045E 0x0B20 BLE Xbox Elite Series 2 0x045E 0x0B05 Classic Xbox Elite Series 2 0x045E 0x0B22 BLE Xbox Series S|X 0x045E 0x0B13 BLE On Thu, Oct 20, 2022 at 10:33 AM Bastien Nocera <hadess@hadess.net> wrote: > > On Thu, 2022-10-20 at 09:14 -0700, Siarhei Vishniakou wrote: > > Currently, rumble is only supported via bluetooth on a single xbox > > controller, called 'model 1708'. On the back of the device, it's > > named > > 'wireless controller for xbox one'. However, in 2021, Microsoft > > released > > a firmware update for this controller. As part of this update, the > > HID > > descriptor of the device changed. The product ID was also changed > > from > > 0x02fd to 0x0b20. On this controller, rumble was supported via > > hid-microsoft, which matched against the old product id (0x02fd). As > > a > > result, the firmware update broke rumble support on this controller. > > > > The hid-microsoft driver actually supports rumble on the new > > firmware, > > as well. So simply adding new product id is sufficient to bring back > > this support. > > > > After discussing further with the xbox team, it was pointed out that > > other xbox controllers, such as xbox elite, should also be possible > > to > > support in a similar way. However, I could only verify this on 2 > > controllers so far. > > > > In this patch, add rumble support for the following 2 controllers: > > 1. 'wireless controller for xbox one', model 1708, after applying the > > most recent firmware update as of 2022-10-20. > > 2. 'xbox wireless controller', model 1914. This is also sometimes > > referred to as 'xbox series S|X'. > > This is a good summary of the different models: > https://en.wikipedia.org/wiki/Xbox_Wireless_Controller#Summary > > You can remove the mention of the other names it might have, or the > names at the back of the joypad, and use the model numbers instead. > > I think I have a model of each one of the devices in the list (except > 1797 and 1537 IIRC), so I could test this if needed. Do you have a good > test case for the various forces of rumble that would exercise both > motors?
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index da86565f04d4..e9c7eae849b6 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -914,6 +914,8 @@ #define USB_DEVICE_ID_MS_POWER_COVER 0x07da #define USB_DEVICE_ID_MS_SURFACE3_COVER 0x07de #define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd +#define USB_DEVICE_ID_MS_XBOX_ONE_S_2021_FIRMWARE 0x0b20 +#define USB_DEVICE_ID_MS_XBOX_WIRELESS_CONTROLLER 0x0b13 #define USB_DEVICE_ID_MS_PIXART_MOUSE 0x00cb #define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS 0x02e0 diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index 071fd093a5f4..2973e91fc7a1 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -448,6 +448,10 @@ static const struct hid_device_id ms_devices[] = { .driver_data = MS_SURFACE_DIAL }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER), .driver_data = MS_QUIRK_FF }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_XBOX_ONE_S_2021_FIRMWARE), + .driver_data = MS_QUIRK_FF }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_XBOX_WIRELESS_CONTROLLER), + .driver_data = MS_QUIRK_FF }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS), .driver_data = MS_QUIRK_FF }, { }
Currently, rumble is only supported via bluetooth on a single xbox controller, called 'model 1708'. On the back of the device, it's named 'wireless controller for xbox one'. However, in 2021, Microsoft released a firmware update for this controller. As part of this update, the HID descriptor of the device changed. The product ID was also changed from 0x02fd to 0x0b20. On this controller, rumble was supported via hid-microsoft, which matched against the old product id (0x02fd). As a result, the firmware update broke rumble support on this controller. The hid-microsoft driver actually supports rumble on the new firmware, as well. So simply adding new product id is sufficient to bring back this support. After discussing further with the xbox team, it was pointed out that other xbox controllers, such as xbox elite, should also be possible to support in a similar way. However, I could only verify this on 2 controllers so far. In this patch, add rumble support for the following 2 controllers: 1. 'wireless controller for xbox one', model 1708, after applying the most recent firmware update as of 2022-10-20. 2. 'xbox wireless controller', model 1914. This is also sometimes referred to as 'xbox series S|X'. I verified rumble support on both bluetooth and usb. Signed-off-by: Siarhei Vishniakou <svv@google.com> --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-microsoft.c | 4 ++++ 2 files changed, 6 insertions(+)