diff mbox series

tests/qtest/libqos/e1000e: Use e1000_regs.h

Message ID 20221013055245.28102-1-akihiko.odaki@daynix.com (mailing list archive)
State New, archived
Headers show
Series tests/qtest/libqos/e1000e: Use e1000_regs.h | expand

Commit Message

Akihiko Odaki Oct. 13, 2022, 5:52 a.m. UTC 
The register definitions in tests/qtest/libqos/e1000e.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.

E1000E_CTRL_EXT_TXLSFLOW is removed from E1000E_CTRL_EXT settings
because hw/net/e1000_regs.h does not have the definition and it is for
TCP segmentation offload, which does not matter for the implemented
tests.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
 hw/net/e1000_regs.h         |   1 +
 tests/qtest/libqos/e1000e.c | 119 +++++++++++++-----------------------
 2 files changed, 45 insertions(+), 75 deletions(-)

Comments

Thomas Huth Oct. 25, 2022, 2:54 p.m. UTC | #1 
On 13/10/2022 07.52, Akihiko Odaki wrote:
> The register definitions in tests/qtest/libqos/e1000e.c had names
> different from hw/net/e1000_regs.h, which made it hard to understand
> what test codes corresponds to the implementation. Use
> hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
> these duplications.
> 
> E1000E_CTRL_EXT_TXLSFLOW is removed from E1000E_CTRL_EXT settings
> because hw/net/e1000_regs.h does not have the definition and it is for
> TCP segmentation offload, which does not matter for the implemented
> tests.
> 
> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> ---
>   hw/net/e1000_regs.h         |   1 +
>   tests/qtest/libqos/e1000e.c | 119 +++++++++++++-----------------------
>   2 files changed, 45 insertions(+), 75 deletions(-)

Acked-by: Thomas Huth <thuth@redhat.com>

I can take it through my testing-next tree:

  https://gitlab.com/thuth/qemu/-/commits/testing-next

  Thomas
Jason Wang Nov. 7, 2022, 7:45 a.m. UTC | #2 
On Tue, Oct 25, 2022 at 10:54 PM Thomas Huth <thuth@redhat.com> wrote:
>
> On 13/10/2022 07.52, Akihiko Odaki wrote:
> > The register definitions in tests/qtest/libqos/e1000e.c had names
> > different from hw/net/e1000_regs.h, which made it hard to understand
> > what test codes corresponds to the implementation. Use
> > hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
> > these duplications.
> >
> > E1000E_CTRL_EXT_TXLSFLOW is removed from E1000E_CTRL_EXT settings
> > because hw/net/e1000_regs.h does not have the definition and it is for
> > TCP segmentation offload, which does not matter for the implemented
> > tests.
> >
> > Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> > ---
> >   hw/net/e1000_regs.h         |   1 +
> >   tests/qtest/libqos/e1000e.c | 119 +++++++++++++-----------------------
> >   2 files changed, 45 insertions(+), 75 deletions(-)
>
> Acked-by: Thomas Huth <thuth@redhat.com>
>
> I can take it through my testing-next tree:

Acked-by: Jason Wang <jasowang@redhat.com>

>
>   https://gitlab.com/thuth/qemu/-/commits/testing-next
>
>   Thomas
>
diff mbox series

Patch

diff --git a/hw/net/e1000_regs.h b/hw/net/e1000_regs.h
index e274c4fcd2..170452e0af 100644
--- a/hw/net/e1000_regs.h
+++ b/hw/net/e1000_regs.h
@@ -793,6 +793,7 @@ 
 #define E1000_CTRL_EXT_ASDCHK  0x00001000 /* auto speed detection check */
 #define E1000_CTRL_EXT_EE_RST  0x00002000 /* EEPROM reset */
 #define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
 #define E1000_CTRL_EXT_EIAME   0x01000000
 #define E1000_CTRL_EXT_IAME    0x08000000 /* Int ACK Auto-mask */
 #define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
diff --git a/tests/qtest/libqos/e1000e.c b/tests/qtest/libqos/e1000e.c
index f87e0e84b2..9b6bb17565 100644
--- a/tests/qtest/libqos/e1000e.c
+++ b/tests/qtest/libqos/e1000e.c
@@ -17,6 +17,7 @@ 
  */
 
 #include "qemu/osdep.h"
+#include "hw/net/e1000_regs.h"
 #include "../libqtest.h"
 #include "pci-pc.h"
 #include "qemu/sockets.h"
@@ -27,49 +28,13 @@ 
 #include "qgraph.h"
 #include "e1000e.h"
 
-#define E1000E_IMS      (0x00d0)
+#define E1000E_IVAR_TEST_CFG \
+    (E1000E_RX0_MSG_ID | E1000_IVAR_INT_ALLOC_VALID             | \
+     ((E1000E_TX0_MSG_ID | E1000_IVAR_INT_ALLOC_VALID) << 8)    | \
+     ((E1000E_OTHER_MSG_ID | E1000_IVAR_INT_ALLOC_VALID) << 16) | \
+     E1000_IVAR_TX_INT_EVERY_WB)
 
-#define E1000E_STATUS   (0x0008)
-#define E1000E_STATUS_LU BIT(1)
-#define E1000E_STATUS_ASDV1000 BIT(9)
-
-#define E1000E_CTRL     (0x0000)
-#define E1000E_CTRL_RESET BIT(26)
-
-#define E1000E_RCTL     (0x0100)
-#define E1000E_RCTL_EN  BIT(1)
-#define E1000E_RCTL_UPE BIT(3)
-#define E1000E_RCTL_MPE BIT(4)
-
-#define E1000E_RFCTL     (0x5008)
-#define E1000E_RFCTL_EXTEN  BIT(15)
-
-#define E1000E_TCTL     (0x0400)
-#define E1000E_TCTL_EN  BIT(1)
-
-#define E1000E_CTRL_EXT             (0x0018)
-#define E1000E_CTRL_EXT_DRV_LOAD    BIT(28)
-#define E1000E_CTRL_EXT_TXLSFLOW    BIT(22)
-
-#define E1000E_IVAR                 (0x00E4)
-#define E1000E_IVAR_TEST_CFG        ((E1000E_RX0_MSG_ID << 0)    | BIT(3)  | \
-                                     (E1000E_TX0_MSG_ID << 8)    | BIT(11) | \
-                                     (E1000E_OTHER_MSG_ID << 16) | BIT(19) | \
-                                     BIT(31))
-
-#define E1000E_RING_LEN             (0x1000)
-
-#define E1000E_TDBAL    (0x3800)
-
-#define E1000E_TDBAH    (0x3804)
-#define E1000E_TDH      (0x3810)
-
-#define E1000E_RDBAL    (0x2800)
-#define E1000E_RDBAH    (0x2804)
-#define E1000E_RDH      (0x2810)
-
-#define E1000E_TXD_LEN              (16)
-#define E1000E_RXD_LEN              (16)
+#define E1000E_RING_LEN (0x1000)
 
 static void e1000e_macreg_write(QE1000E *d, uint32_t reg, uint32_t val)
 {
@@ -87,30 +52,34 @@  void e1000e_tx_ring_push(QE1000E *d, void *descr)
 {
     QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
     uint32_t tail = e1000e_macreg_read(d, E1000E_TDT);
-    uint32_t len = e1000e_macreg_read(d, E1000E_TDLEN) / E1000E_TXD_LEN;
+    uint32_t len = e1000e_macreg_read(d, E1000E_TDLEN) / E1000_RING_DESC_LEN;
 
-    qtest_memwrite(d_pci->pci_dev.bus->qts, d->tx_ring + tail * E1000E_TXD_LEN,
-                   descr, E1000E_TXD_LEN);
+    qtest_memwrite(d_pci->pci_dev.bus->qts,
+                   d->tx_ring + tail * E1000_RING_DESC_LEN,
+                   descr, E1000_RING_DESC_LEN);
     e1000e_macreg_write(d, E1000E_TDT, (tail + 1) % len);
 
     /* Read WB data for the packet transmitted */
-    qtest_memread(d_pci->pci_dev.bus->qts, d->tx_ring + tail * E1000E_TXD_LEN,
-                  descr, E1000E_TXD_LEN);
+    qtest_memread(d_pci->pci_dev.bus->qts,
+                  d->tx_ring + tail * E1000_RING_DESC_LEN,
+                  descr, E1000_RING_DESC_LEN);
 }
 
 void e1000e_rx_ring_push(QE1000E *d, void *descr)
 {
     QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
     uint32_t tail = e1000e_macreg_read(d, E1000E_RDT);
-    uint32_t len = e1000e_macreg_read(d, E1000E_RDLEN) / E1000E_RXD_LEN;
+    uint32_t len = e1000e_macreg_read(d, E1000E_RDLEN) / E1000_RING_DESC_LEN;
 
-    qtest_memwrite(d_pci->pci_dev.bus->qts, d->rx_ring + tail * E1000E_RXD_LEN,
-                   descr, E1000E_RXD_LEN);
+    qtest_memwrite(d_pci->pci_dev.bus->qts,
+                   d->rx_ring + tail * E1000_RING_DESC_LEN,
+                   descr, E1000_RING_DESC_LEN);
     e1000e_macreg_write(d, E1000E_RDT, (tail + 1) % len);
 
     /* Read WB data for the packet received */
-    qtest_memread(d_pci->pci_dev.bus->qts, d->rx_ring + tail * E1000E_RXD_LEN,
-                  descr, E1000E_RXD_LEN);
+    qtest_memread(d_pci->pci_dev.bus->qts,
+                  d->rx_ring + tail * E1000_RING_DESC_LEN,
+                  descr, E1000_RING_DESC_LEN);
 }
 
 static void e1000e_foreach_callback(QPCIDevice *dev, int devfn, void *data)
@@ -151,53 +120,53 @@  static void e1000e_pci_start_hw(QOSGraphObject *obj)
     qpci_device_enable(&d->pci_dev);
 
     /* Reset the device */
-    val = e1000e_macreg_read(&d->e1000e, E1000E_CTRL);
-    e1000e_macreg_write(&d->e1000e, E1000E_CTRL, val | E1000E_CTRL_RESET);
+    val = e1000e_macreg_read(&d->e1000e, E1000_CTRL);
+    e1000e_macreg_write(&d->e1000e, E1000_CTRL, val | E1000_CTRL_RST);
 
     /* Enable and configure MSI-X */
     qpci_msix_enable(&d->pci_dev);
-    e1000e_macreg_write(&d->e1000e, E1000E_IVAR, E1000E_IVAR_TEST_CFG);
+    e1000e_macreg_write(&d->e1000e, E1000_IVAR, E1000E_IVAR_TEST_CFG);
 
     /* Check the device status - link and speed */
-    val = e1000e_macreg_read(&d->e1000e, E1000E_STATUS);
-    g_assert_cmphex(val & (E1000E_STATUS_LU | E1000E_STATUS_ASDV1000),
-        ==, E1000E_STATUS_LU | E1000E_STATUS_ASDV1000);
+    val = e1000e_macreg_read(&d->e1000e, E1000_STATUS);
+    g_assert_cmphex(val & (E1000_STATUS_LU | E1000_STATUS_LAN_INIT_DONE),
+        ==, E1000_STATUS_LU | E1000_STATUS_LAN_INIT_DONE);
 
     /* Initialize TX/RX logic */
-    e1000e_macreg_write(&d->e1000e, E1000E_RCTL, 0);
-    e1000e_macreg_write(&d->e1000e, E1000E_TCTL, 0);
+    e1000e_macreg_write(&d->e1000e, E1000_RCTL, 0);
+    e1000e_macreg_write(&d->e1000e, E1000_TCTL, 0);
 
     /* Notify the device that the driver is ready */
-    val = e1000e_macreg_read(&d->e1000e, E1000E_CTRL_EXT);
-    e1000e_macreg_write(&d->e1000e, E1000E_CTRL_EXT,
-        val | E1000E_CTRL_EXT_DRV_LOAD | E1000E_CTRL_EXT_TXLSFLOW);
+    val = e1000e_macreg_read(&d->e1000e, E1000_CTRL_EXT);
+    e1000e_macreg_write(&d->e1000e, E1000_CTRL_EXT,
+        val | E1000_CTRL_EXT_DRV_LOAD);
 
-    e1000e_macreg_write(&d->e1000e, E1000E_TDBAL,
+    e1000e_macreg_write(&d->e1000e, E1000_TDBAL,
                            (uint32_t) d->e1000e.tx_ring);
-    e1000e_macreg_write(&d->e1000e, E1000E_TDBAH,
+    e1000e_macreg_write(&d->e1000e, E1000_TDBAH,
                            (uint32_t) (d->e1000e.tx_ring >> 32));
     e1000e_macreg_write(&d->e1000e, E1000E_TDLEN, E1000E_RING_LEN);
     e1000e_macreg_write(&d->e1000e, E1000E_TDT, 0);
-    e1000e_macreg_write(&d->e1000e, E1000E_TDH, 0);
+    e1000e_macreg_write(&d->e1000e, E1000_TDH, 0);
 
     /* Enable transmit */
-    e1000e_macreg_write(&d->e1000e, E1000E_TCTL, E1000E_TCTL_EN);
-    e1000e_macreg_write(&d->e1000e, E1000E_RDBAL,
+    e1000e_macreg_write(&d->e1000e, E1000_TCTL, E1000_TCTL_EN);
+    e1000e_macreg_write(&d->e1000e, E1000_RDBAL,
                            (uint32_t)d->e1000e.rx_ring);
-    e1000e_macreg_write(&d->e1000e, E1000E_RDBAH,
+    e1000e_macreg_write(&d->e1000e, E1000_RDBAH,
                            (uint32_t)(d->e1000e.rx_ring >> 32));
     e1000e_macreg_write(&d->e1000e, E1000E_RDLEN, E1000E_RING_LEN);
     e1000e_macreg_write(&d->e1000e, E1000E_RDT, 0);
-    e1000e_macreg_write(&d->e1000e, E1000E_RDH, 0);
+    e1000e_macreg_write(&d->e1000e, E1000_RDH, 0);
 
     /* Enable receive */
-    e1000e_macreg_write(&d->e1000e, E1000E_RFCTL, E1000E_RFCTL_EXTEN);
-    e1000e_macreg_write(&d->e1000e, E1000E_RCTL, E1000E_RCTL_EN  |
-                                        E1000E_RCTL_UPE |
-                                        E1000E_RCTL_MPE);
+    e1000e_macreg_write(&d->e1000e, E1000_RFCTL, E1000_RFCTL_EXTEN);
+    e1000e_macreg_write(&d->e1000e, E1000_RCTL, E1000_RCTL_EN  |
+                                        E1000_RCTL_UPE |
+                                        E1000_RCTL_MPE);
 
     /* Enable all interrupts */
-    e1000e_macreg_write(&d->e1000e, E1000E_IMS, 0xFFFFFFFF);
+    e1000e_macreg_write(&d->e1000e, E1000_IMS, 0xFFFFFFFF);
 
 }