diff mbox series

[v1,net-next,6/7] dt-bindings: net: add generic ethernet-switch-port binding

Message ID 20221025050355.3979380-7-colin.foster@in-advantage.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series dt-binding preparation for ocelot switches | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 15 of 15 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 107 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Colin Foster Oct. 25, 2022, 5:03 a.m. UTC
The dsa-port.yaml binding had several references that can be common to all
ethernet ports, not just dsa-specific ones. Break out the generic bindings
to ethernet-switch-port.yaml they can be used by non-dsa drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
---
 .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +----------
 .../bindings/net/ethernet-switch-port.yaml    | 44 +++++++++++++++++++
 .../bindings/net/ethernet-switch.yaml         |  4 +-
 MAINTAINERS                                   |  1 +
 4 files changed, 50 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml

Comments

Rob Herring Oct. 26, 2022, 5:44 p.m. UTC | #1
On Mon, Oct 24, 2022 at 10:03:54PM -0700, Colin Foster wrote:
> The dsa-port.yaml binding had several references that can be common to all
> ethernet ports, not just dsa-specific ones. Break out the generic bindings
> to ethernet-switch-port.yaml they can be used by non-dsa drivers.
> 
> Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> Suggested-by: Vladimir Oltean <olteanv@gmail.com>
> ---
>  .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +----------
>  .../bindings/net/ethernet-switch-port.yaml    | 44 +++++++++++++++++++
>  .../bindings/net/ethernet-switch.yaml         |  4 +-
>  MAINTAINERS                                   |  1 +
>  4 files changed, 50 insertions(+), 25 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> index 10ad7e71097b..c5144e733511 100644
> --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> @@ -4,7 +4,7 @@
>  $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Ethernet Switch port Device Tree Bindings
> +title: DSA Switch port Device Tree Bindings
>  
>  maintainers:
>    - Andrew Lunn <andrew@lunn.ch>
> @@ -15,12 +15,9 @@ description:
>    Ethernet switch port Description
>  
>  allOf:
> -  - $ref: /schemas/net/ethernet-controller.yaml#
> +  - $ref: /schemas/net/ethernet-switch-port.yaml#
>  
>  properties:
> -  reg:
> -    description: Port number
> -
>    label:
>      description:
>        Describes the label associated with this port, which will become
> @@ -57,25 +54,6 @@ properties:
>        - rtl8_4t
>        - seville
>  
> -  phy-handle: true
> -
> -  phy-mode: true
> -
> -  fixed-link: true
> -
> -  mac-address: true
> -
> -  sfp: true
> -
> -  managed: true
> -
> -  rx-internal-delay-ps: true
> -
> -  tx-internal-delay-ps: true
> -
> -required:
> -  - reg
> -
>  # CPU and DSA ports must have phylink-compatible link descriptions
>  if:
>    oneOf:
> diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> new file mode 100644
> index 000000000000..cb1e5e12bf0a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ethernet Switch port Device Tree Bindings
> +
> +maintainers:
> +  - Andrew Lunn <andrew@lunn.ch>
> +  - Florian Fainelli <f.fainelli@gmail.com>
> +  - Vivien Didelot <vivien.didelot@gmail.com>
> +
> +description:
> +  Ethernet switch port Description
> +
> +$ref: ethernet-controller.yaml#
> +
> +properties:
> +  reg:
> +    description: Port number
> +
> +  phy-handle: true
> +
> +  phy-mode: true
> +
> +  fixed-link: true
> +
> +  mac-address: true
> +
> +  sfp: true
> +
> +  managed: true
> +
> +  rx-internal-delay-ps: true
> +
> +  tx-internal-delay-ps: true
> +
> +required:
> +  - reg
> +
> +additionalProperties: true
> +
> +...
> diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> index fbaac536673d..f698857619da 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> @@ -36,7 +36,9 @@ patternProperties:
>          type: object
>          description: Ethernet switch ports
>  
> -        $ref: /schemas/net/dsa/dsa-port.yaml#
> +        allOf:
> +          - $ref: /schemas/net/dsa/dsa-port.yaml#
> +          - $ref: ethernet-switch-port.yaml#

dsa-port.yaml references ethernet-switch-port.yaml, so you shouldn't 
need both here.

I imagine what you were trying to do here was say it is either one of 
these, not both. I don't think this is going work for the same reasons I 
mentioned with unevaluatedProperties.

Rob
Colin Foster Oct. 27, 2022, 4:06 a.m. UTC | #2
On Wed, Oct 26, 2022 at 12:44:21PM -0500, Rob Herring wrote:
> On Mon, Oct 24, 2022 at 10:03:54PM -0700, Colin Foster wrote:
> > The dsa-port.yaml binding had several references that can be common to all
> > ethernet ports, not just dsa-specific ones. Break out the generic bindings
> > to ethernet-switch-port.yaml they can be used by non-dsa drivers.
> > 
> > Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> > Suggested-by: Vladimir Oltean <olteanv@gmail.com>
> > ---
> >  .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +----------
> >  .../bindings/net/ethernet-switch-port.yaml    | 44 +++++++++++++++++++
> >  .../bindings/net/ethernet-switch.yaml         |  4 +-
> >  MAINTAINERS                                   |  1 +
> >  4 files changed, 50 insertions(+), 25 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > index 10ad7e71097b..c5144e733511 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > @@ -4,7 +4,7 @@
> >  $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
> >  $schema: http://devicetree.org/meta-schemas/core.yaml#
> >  
> > -title: Ethernet Switch port Device Tree Bindings
> > +title: DSA Switch port Device Tree Bindings
> >  
> >  maintainers:
> >    - Andrew Lunn <andrew@lunn.ch>
> > @@ -15,12 +15,9 @@ description:
> >    Ethernet switch port Description
> >  
> >  allOf:
> > -  - $ref: /schemas/net/ethernet-controller.yaml#
> > +  - $ref: /schemas/net/ethernet-switch-port.yaml#
> >  
> >  properties:
> > -  reg:
> > -    description: Port number
> > -
> >    label:
> >      description:
> >        Describes the label associated with this port, which will become
> > @@ -57,25 +54,6 @@ properties:
> >        - rtl8_4t
> >        - seville
> >  
> > -  phy-handle: true
> > -
> > -  phy-mode: true
> > -
> > -  fixed-link: true
> > -
> > -  mac-address: true
> > -
> > -  sfp: true
> > -
> > -  managed: true
> > -
> > -  rx-internal-delay-ps: true
> > -
> > -  tx-internal-delay-ps: true
> > -
> > -required:
> > -  - reg
> > -
> >  # CPU and DSA ports must have phylink-compatible link descriptions
> >  if:
> >    oneOf:
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> > new file mode 100644
> > index 000000000000..cb1e5e12bf0a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> > @@ -0,0 +1,44 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Ethernet Switch port Device Tree Bindings
> > +
> > +maintainers:
> > +  - Andrew Lunn <andrew@lunn.ch>
> > +  - Florian Fainelli <f.fainelli@gmail.com>
> > +  - Vivien Didelot <vivien.didelot@gmail.com>
> > +
> > +description:
> > +  Ethernet switch port Description
> > +
> > +$ref: ethernet-controller.yaml#
> > +
> > +properties:
> > +  reg:
> > +    description: Port number
> > +
> > +  phy-handle: true
> > +
> > +  phy-mode: true
> > +
> > +  fixed-link: true
> > +
> > +  mac-address: true
> > +
> > +  sfp: true
> > +
> > +  managed: true
> > +
> > +  rx-internal-delay-ps: true
> > +
> > +  tx-internal-delay-ps: true
> > +
> > +required:
> > +  - reg
> > +
> > +additionalProperties: true
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> > index fbaac536673d..f698857619da 100644
> > --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> > +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> > @@ -36,7 +36,9 @@ patternProperties:
> >          type: object
> >          description: Ethernet switch ports
> >  
> > -        $ref: /schemas/net/dsa/dsa-port.yaml#
> > +        allOf:
> > +          - $ref: /schemas/net/dsa/dsa-port.yaml#
> > +          - $ref: ethernet-switch-port.yaml#
> 
> dsa-port.yaml references ethernet-switch-port.yaml, so you shouldn't 
> need both here.
> 
> I imagine what you were trying to do here was say it is either one of 
> these, not both. I don't think this is going work for the same reasons I 
> mentioned with unevaluatedProperties.

Oh, that was definitely a mistake for me to reference
ethernet-switch-port.yaml. And that was exactly requested of me when
Vladimir helped guide me down this path:

"""
6. The ethernet-switch.yaml will have "$ref: ethernet-switch-port.yaml#"
   and "$ref: dsa-port.yaml". The dsa-port.yaml schema will *not* have
   "$ref: ethernet-switch-port.yaml#", just its custom additions.
   I'm not 100% on this, but I think there will be a problem if:
   - dsa.yaml references ethernet-switch.yaml
     - ethernet-switch.yaml references ethernet-switch-port.yaml
   - dsa.yaml also references dsa-port.yaml
     - dsa-port.yaml references ethernet-switch-port.yaml
   because ethernet-switch-port.yaml will be referenced twice. Again,
   not sure if this is a problem. If it isn't, things can be simpler,
   just make dsa-port.yaml reference ethernet-switch-port.yaml, and skip
   steps 2 and 3 since dsa-port.yaml containing just the DSA specifics
   is no longer problematic.
"""

I might have been testing to see if this was necessary and since I
didn't notice any dt_binding_check errors this might have slipped into
the patch set. But my intent was to reference both here and remove the
reference in dsa-port.yaml.

> 
> Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index 10ad7e71097b..c5144e733511 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -4,7 +4,7 @@ 
 $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Switch port Device Tree Bindings
+title: DSA Switch port Device Tree Bindings
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
@@ -15,12 +15,9 @@  description:
   Ethernet switch port Description
 
 allOf:
-  - $ref: /schemas/net/ethernet-controller.yaml#
+  - $ref: /schemas/net/ethernet-switch-port.yaml#
 
 properties:
-  reg:
-    description: Port number
-
   label:
     description:
       Describes the label associated with this port, which will become
@@ -57,25 +54,6 @@  properties:
       - rtl8_4t
       - seville
 
-  phy-handle: true
-
-  phy-mode: true
-
-  fixed-link: true
-
-  mac-address: true
-
-  sfp: true
-
-  managed: true
-
-  rx-internal-delay-ps: true
-
-  tx-internal-delay-ps: true
-
-required:
-  - reg
-
 # CPU and DSA ports must have phylink-compatible link descriptions
 if:
   oneOf:
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
new file mode 100644
index 000000000000..cb1e5e12bf0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
@@ -0,0 +1,44 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Switch port Device Tree Bindings
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vivien Didelot <vivien.didelot@gmail.com>
+
+description:
+  Ethernet switch port Description
+
+$ref: ethernet-controller.yaml#
+
+properties:
+  reg:
+    description: Port number
+
+  phy-handle: true
+
+  phy-mode: true
+
+  fixed-link: true
+
+  mac-address: true
+
+  sfp: true
+
+  managed: true
+
+  rx-internal-delay-ps: true
+
+  tx-internal-delay-ps: true
+
+required:
+  - reg
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
index fbaac536673d..f698857619da 100644
--- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
@@ -36,7 +36,9 @@  patternProperties:
         type: object
         description: Ethernet switch ports
 
-        $ref: /schemas/net/dsa/dsa-port.yaml#
+        allOf:
+          - $ref: /schemas/net/dsa/dsa-port.yaml#
+          - $ref: ethernet-switch-port.yaml#
 
 oneOf:
   - required:
diff --git a/MAINTAINERS b/MAINTAINERS
index 3b6c3989c419..d98fc1962874 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14326,6 +14326,7 @@  M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Vladimir Oltean <olteanv@gmail.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/
+F:	Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
 F:	Documentation/devicetree/bindings/net/ethernet-switch.yaml
 F:	drivers/net/dsa/
 F:	include/linux/dsa/