| Message ID | 20221029100646.294583-3-alistair@alistair23.me (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for the silergy,sy7636a | expand |
On Sat, Oct 29, 2022 at 08:06:46PM +1000, Alistair Francis wrote: > Enable the silergy,sy7636a and silergy,sy7636a-regulator on the > reMarkable2. > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > arch/arm/boot/dts/imx7d-remarkable2.dts | 63 +++++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts > index a2a91bfdd98e..58581295b9a0 100644 > --- a/arch/arm/boot/dts/imx7d-remarkable2.dts > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts > @@ -22,6 +22,28 @@ memory@80000000 { > reg = <0x80000000 0x40000000>; > }; > > + thermal-zones { > + epd-thermal { > + thermal-sensors = <&epd_pmic>; > + polling-delay-passive = <30000>; > + polling-delay = <30000>; > + > + trips { > + trip0 { > + temperature = <49000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + trip1 { > + temperature = <50000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > reg_brcm: regulator-brcm { > compatible = "regulator-fixed"; > regulator-name = "brcm_reg"; > @@ -84,6 +106,33 @@ wacom_digitizer: digitizer@9 { > }; > }; > > +&i2c4 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&pinctrl_i2c4>; > + pinctrl-1 = <&pinctrl_i2c4>; > + status = "okay"; > + > + sy7636a: pmic@62 { > + compatible = "silergy,sy7636a"; > + reg = <0x62>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_epdpmic>; > + #address-cells = <1>; > + #size-cells = <0>; > + #thermal-sensor-cells = <0>; > + epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; > + status = "okay"; The "okay" status is only needed to flip disabled devices. It can be dropped here. I fixed it up and applied both patches. Shawn > + > + regulators { > + reg_epdpmic: vcom { > + regulator-name = "vcom"; > + regulator-boot-on; > + }; > + }; > + }; > +}; > + > &snvs_pwrkey { > status = "okay"; > }; > @@ -177,6 +226,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 > >; > }; > > + pinctrl_epdpmic: epdpmicgrp { > + fsl,pins = < > + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074 > + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014 > + >; > + }; > + > pinctrl_i2c1: i2c1grp { > fsl,pins = < > MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f > @@ -184,6 +240,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f > >; > }; > > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f > + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f > + >; > + }; > + > pinctrl_uart1: uart1grp { > fsl,pins = < > MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 > -- > 2.38.1 >
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index a2a91bfdd98e..58581295b9a0 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -22,6 +22,28 @@ memory@80000000 { reg = <0x80000000 0x40000000>; }; + thermal-zones { + epd-thermal { + thermal-sensors = <&epd_pmic>; + polling-delay-passive = <30000>; + polling-delay = <30000>; + + trips { + trip0 { + temperature = <49000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1 { + temperature = <50000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + reg_brcm: regulator-brcm { compatible = "regulator-fixed"; regulator-name = "brcm_reg"; @@ -84,6 +106,33 @@ wacom_digitizer: digitizer@9 { }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4>; + status = "okay"; + + sy7636a: pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdpmic>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <0>; + epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + regulator-boot-on; + }; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -177,6 +226,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 >; }; + pinctrl_epdpmic: epdpmicgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074 + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -184,6 +240,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
Enable the silergy,sy7636a and silergy,sy7636a-regulator on the reMarkable2. Signed-off-by: Alistair Francis <alistair@alistair23.me> --- arch/arm/boot/dts/imx7d-remarkable2.dts | 63 +++++++++++++++++++++++++ 1 file changed, 63 insertions(+)