| Message ID | 20221030094258.486428-9-iskren.chernev@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | f110f2af3a9b848c3b287137d9535074742bb8c3 |
| Headers | show |
| Series | Add support for sm6115,4250 and OnePlus Nord N100 | expand |
On 30.10.2022 10:42, Iskren Chernev wrote: > Add initial support for OnePlus Nord N100, based on SM4250. Currently > working: > - boots > - usb > - built-in flash storage (UFS) > - SD card reader > > Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 241 ++++++++++++++++++ > 2 files changed, 242 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index b0558d3389e5..eb2a58b8af5f 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > new file mode 100644 > index 000000000000..a3f1c7c41fd7 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > @@ -0,0 +1,241 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "sm4250.dtsi" > + > +/ { > + model = "OnePlus Nord N100"; > + compatible = "oneplus,billie2", "qcom,sm4250"; > + > + /* required for bootloader to select correct board */ > + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; > + qcom,board-id = <0x1000b 0x00>; > + > + aliases { > + }; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + stdout-path = "framebuffer0"; > + > + framebuffer0: framebuffer@9d400000 { > + compatible = "simple-framebuffer"; > + reg = <0 0x5c000000 0 (1600 * 720 * 4)>; > + width = <720>; > + height = <1600>; > + stride = <(720 * 4)>; > + format = "a8r8g8b8"; > + }; > + }; > +}; > + > +&reserved_memory { > + bootloader_log_mem: memory@5fff7000 { > + reg = <0x0 0x5fff7000 0x0 0x8000>; > + no-map; > + }; > + > + ramoops@cbe00000 { > + compatible = "ramoops"; > + reg = <0x0 0xcbe00000 0x0 0x400000>; > + record-size = <0x40000>; > + pmsg-size = <0x200000>; > + console-size = <0x40000>; > + ftrace-size = <0x40000>; > + }; > + > + param_mem: memory@cc200000 { > + reg = <0x0 0xcc200000 0x0 0x100000>; > + no-map; > + }; > + > + mtp_mem: memory@cc300000 { > + reg = <0x00 0xcc300000 0x00 0xb00000>; 0x00 -> 0x0 for consistency? Other than that, lgtm Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > + no-map; > + }; > +}; > + > +&rpm_requests { > + regulators-0 { > + compatible = "qcom,rpm-pm6125-regulators"; > + > + vreg_s6a: s6 { > + regulator-min-microvolt = <320000>; > + regulator-max-microvolt = <1456000>; > + }; > + > + vreg_s7a: s7 { > + regulator-min-microvolt = <1280000>; > + regulator-max-microvolt = <2040000>; > + }; > + > + vreg_s8a: s8 { > + regulator-min-microvolt = <1064000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + vreg_l1a: l1 { > + regulator-min-microvolt = <952000>; > + regulator-max-microvolt = <1152000>; > + }; > + > + vreg_l4a: l4 { > + regulator-min-microvolt = <488000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + vreg_l5a: l5 { > + regulator-min-microvolt = <1648000>; > + regulator-max-microvolt = <3056000>; > + }; > + > + vreg_l6a: l6 { > + regulator-min-microvolt = <576000>; > + regulator-max-microvolt = <656000>; > + }; > + > + vreg_l7a: l7 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + vreg_l8a: l8 { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <728000>; > + }; > + > + vreg_l9a: l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + vreg_l10a: l10 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + vreg_l11a: l11 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1952000>; > + }; > + > + vreg_l12a: l12 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <1984000>; > + }; > + > + vreg_l13a: l13 { > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1952000>; > + }; > + > + vreg_l14a: l14 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + vreg_l15a: l15 { > + regulator-min-microvolt = <2920000>; > + regulator-max-microvolt = <3232000>; > + }; > + > + vreg_l16a: l16 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + vreg_l17a: l17 { > + regulator-min-microvolt = <1152000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + vreg_l18a: l18 { > + regulator-min-microvolt = <1104000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + vreg_l19a: l19 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + vreg_l20a: l20 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + vreg_l21a: l21 { > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3544000>; > + }; > + > + vreg_l22a: l22 { > + regulator-min-microvolt = <2952000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + vreg_l23a: l23 { > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + vreg_l24a: l24 { > + regulator-min-microvolt = <2704000>; > + regulator-max-microvolt = <3544000>; > + }; > + }; > +}; > + > +&sleep_clk { > + clock-frequency = <32764>; > +}; > + > +&sdhc_2 { > + vmmc-supply = <&vreg_l22a>; > + vqmmc-supply = <&vreg_l5a>; > + > + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; > + > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <14 4>; > +}; > + > +&ufs_mem_hc { > + vcc-supply = <&vreg_l24a>; > + vcc-max-microamp = <600000>; > + vccq2-supply = <&vreg_l11a>; > + vccq2-max-microamp = <600000>; > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l4a>; > + vdda-pll-supply = <&vreg_l12a>; > + vddp-ref-clk-supply = <&vreg_l18a>; > + status = "okay"; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_hsphy { > + vdd-supply = <&vreg_l4a>; > + vdda-pll-supply = <&vreg_l12a>; > + vdda-phy-dpdm-supply = <&vreg_l15a>; > + status = "okay"; > +}; > + > +&xo_board { > + clock-frequency = <19200000>; > +};
On 30/10/2022 05:42, Iskren Chernev wrote: > Add initial support for OnePlus Nord N100, based on SM4250. Currently > working: > - boots > - usb > - built-in flash storage (UFS) > - SD card reader > > Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 241 ++++++++++++++++++ > 2 files changed, 242 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index b0558d3389e5..eb2a58b8af5f 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > new file mode 100644 > index 000000000000..a3f1c7c41fd7 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts > @@ -0,0 +1,241 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "sm4250.dtsi" > + > +/ { > + model = "OnePlus Nord N100"; > + compatible = "oneplus,billie2", "qcom,sm4250"; > + > + /* required for bootloader to select correct board */ > + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; > + qcom,board-id = <0x1000b 0x00>; These are currently not allowed for SM4250. If there are really needed, please justify it and update Documentation/devicetree/bindings/arm/qcom.yaml. Then also update include/dt-bindings/arm/qcom,ids.h and socinfo driver. Best regards, Krzysztof
On 11/4/22 21:17, Krzysztof Kozlowski wrote: > On 30/10/2022 05:42, Iskren Chernev wrote: >> Add initial support for OnePlus Nord N100, based on SM4250. Currently >> working: >> - boots >> - usb >> - built-in flash storage (UFS) >> - SD card reader >> >> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> >> --- >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 241 ++++++++++++++++++ >> 2 files changed, 242 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index b0558d3389e5..eb2a58b8af5f 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb >> dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb >> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts >> new file mode 100644 >> index 000000000000..a3f1c7c41fd7 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts >> @@ -0,0 +1,241 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> >> + */ >> + >> +/dts-v1/; >> + >> +#include "sm4250.dtsi" >> + >> +/ { >> + model = "OnePlus Nord N100"; >> + compatible = "oneplus,billie2", "qcom,sm4250"; >> + >> + /* required for bootloader to select correct board */ >> + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; >> + qcom,board-id = <0x1000b 0x00>; > > These are currently not allowed for SM4250. If there are really needed, > please justify it and update > Documentation/devicetree/bindings/arm/qcom.yaml. Then also update > include/dt-bindings/arm/qcom,ids.h and socinfo driver. I'm having some trouble with testing this ATM. If this is the only patch with remaining complaints, the rest can be merged (because there is other work prepped for 4250/6115 that depends on it), and once billie2 is figured out it could be merged separately. > Best regards, > Krzysztof Regards, Iskren
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index b0558d3389e5..eb2a58b8af5f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file mode 100644 index 000000000000..a3f1c7c41fd7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "OnePlus Nord N100"; + compatible = "oneplus,billie2", "qcom,sm4250"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; + qcom,board-id = <0x1000b 0x00>; + + aliases { + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1600 * 720 * 4)>; + width = <720>; + height = <1600>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&reserved_memory { + bootloader_log_mem: memory@5fff7000 { + reg = <0x0 0x5fff7000 0x0 0x8000>; + no-map; + }; + + ramoops@cbe00000 { + compatible = "ramoops"; + reg = <0x0 0xcbe00000 0x0 0x400000>; + record-size = <0x40000>; + pmsg-size = <0x200000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + }; + + param_mem: memory@cc200000 { + reg = <0x0 0xcc200000 0x0 0x100000>; + no-map; + }; + + mtp_mem: memory@cc300000 { + reg = <0x00 0xcc300000 0x00 0xb00000>; + no-map; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <14 4>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +};
Add initial support for OnePlus Nord N100, based on SM4250. Currently working: - boots - usb - built-in flash storage (UFS) - SD card reader Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 241 ++++++++++++++++++ 2 files changed, 242 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts