| Message ID | 20221030073232.22726-1-marijn.suijten@somainline.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | arm64: dts: qcom: sm6350: SD Card fixes, pm6350 keys and touchscreen for PDX213 | expand |
On Sun, 30 Oct 2022 08:32:22 +0100, Marijn Suijten wrote: > Enable SD Card for Sony Lena PDX213 on the sm6350 SoC by providing it > the necessary IOMMU stream ID(s) and pinctrl in SoC dtsi, and setting up > the regulators in device/board DT. Together with regulator support, > power up the touchscreen and import pm6350 dtsi to enable the power and > volume up/down keys. > > Marijn Suijten (10): > arm64: dts: qcom: sm6350: Add resets for SDHCI 1/2 > arm64: dts: qcom: sm6350: Add pinctrl for SDHCI 2 > arm64: dts: qcom: sm6350-lena: Add SD Card Detect to sdc2 on/off > pinctrl > arm64: dts: qcom: pm6350: Include header for KEY_POWER > arm64: dts: qcom: sm6350-lena: Include pm6350 and configure buttons > arm64: dts: qcom: sm6350-lena: Define pm6350 and pm6150l regulators > arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot) > arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA > arm64: dts: qcom: sm6350-lena: Configure Samsung touchscreen > arm64: dts: qcom: sm6350: Add apps_smmu with streamID to SDHCI 1/2 > nodes > > [...] Applied, thanks! [01/10] arm64: dts: qcom: sm6350: Add resets for SDHCI 1/2 commit: e10d451e10418f12e72ed8564f22fdba8b10a9b0 [02/10] arm64: dts: qcom: sm6350: Add pinctrl for SDHCI 2 commit: a5d0314b9d5166503e99336bb832b3b81b200399 [03/10] arm64: dts: qcom: sm6350-lena: Add SD Card Detect to sdc2 on/off pinctrl commit: edf070fcbcec70765fe520d476fd9527b5e96477 [04/10] arm64: dts: qcom: pm6350: Include header for KEY_POWER commit: f6e2d6914c7c095660a9c7c503328eebab1e2557 [05/10] arm64: dts: qcom: sm6350-lena: Include pm6350 and configure buttons commit: 2b8bbe985659e640fda30435c187432c0f614f81 [06/10] arm64: dts: qcom: sm6350-lena: Define pm6350 and pm6150l regulators commit: deaf8c88db7d327ba768ac224e53d29f56027331 [07/10] arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot) commit: 85eef5cb65ab7e8905725d13c98c90442bb93dbc [08/10] arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA commit: 8bad51c68930eba8b26ce362c7c9bfce5d074a2f [09/10] arm64: dts: qcom: sm6350-lena: Configure Samsung touchscreen commit: 2904a41c50e408c0a1e90da0045400edb6f155fe [10/10] arm64: dts: qcom: sm6350: Add apps_smmu with streamID to SDHCI 1/2 nodes commit: 7372b944a6ba5ac86628eaacc89ed4f103435cb9 Best regards,
Enable SD Card for Sony Lena PDX213 on the sm6350 SoC by providing it the necessary IOMMU stream ID(s) and pinctrl in SoC dtsi, and setting up the regulators in device/board DT. Together with regulator support, power up the touchscreen and import pm6350 dtsi to enable the power and volume up/down keys. Marijn Suijten (10): arm64: dts: qcom: sm6350: Add resets for SDHCI 1/2 arm64: dts: qcom: sm6350: Add pinctrl for SDHCI 2 arm64: dts: qcom: sm6350-lena: Add SD Card Detect to sdc2 on/off pinctrl arm64: dts: qcom: pm6350: Include header for KEY_POWER arm64: dts: qcom: sm6350-lena: Include pm6350 and configure buttons arm64: dts: qcom: sm6350-lena: Define pm6350 and pm6150l regulators arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot) arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA arm64: dts: qcom: sm6350-lena: Configure Samsung touchscreen arm64: dts: qcom: sm6350: Add apps_smmu with streamID to SDHCI 1/2 nodes arch/arm64/boot/dts/qcom/pm6350.dtsi | 1 + .../qcom/sm6350-sony-xperia-lena-pdx213.dts | 337 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm6350.dtsi | 48 +++ 3 files changed, 386 insertions(+) -- 2.38.1