| Message ID | d32177ad-f796-62c5-d66f-72d3f6ec2d29@9300 (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | PATCH: Simplify hidpp_send_rap_command_sync calls | expand |
On Thu, Nov 10, 2022 at 03:20:11PM +0100, Andreas Bergmeier wrote: > Inside function, report_id might get overwritten. > Only REPORT_ID_HIDPP_SHORT is ever passed in. > So there seems to be no point in passing report_id in the first place. > Just directly evaluate which report_id to use in the function itself. > > > diff --git a/drivers/hid/hid-logitech-hidpp.c > b/drivers/hid/hid-logitech-hidpp.c > index 898691a77a58..20ae7f73ef08 100644 > --- a/drivers/hid/hid-logitech-hidpp.c > +++ b/drivers/hid/hid-logitech-hidpp.c > @@ -360,15 +360,16 @@ static int hidpp_send_fap_command_sync(struct > hidpp_device *hidpp, > } > > static int hidpp_send_rap_command_sync(struct hidpp_device *hidpp_dev, > - u8 report_id, u8 sub_id, u8 reg_address, u8 *params, int > param_count, > + u8 sub_id, u8 reg_address, u8 *params, int param_count, > struct hidpp_report *response) > { > struct hidpp_report *message; > int ret, max_count; > + u8 report_id; > > - /* Send as long report if short reports are not supported. */ > - if (report_id == REPORT_ID_HIDPP_SHORT && > - !(hidpp_dev->supported_reports & > HIDPP_REPORT_SHORT_SUPPORTED)) > + if (hidpp_dev->supported_reports & HIDPP_REPORT_SHORT_SUPPORTED) > + report_id = REPORT_ID_HIDPP_SHORT; > + else > report_id = REPORT_ID_HIDPP_LONG; > > switch (report_id) { > @@ -549,7 +550,6 @@ static int hidpp10_set_register(struct hidpp_device > *hidpp_dev, > u8 params[3] = { 0 }; > > ret = hidpp_send_rap_command_sync(hidpp_dev, > - REPORT_ID_HIDPP_SHORT, > HIDPP_GET_REGISTER, > register_address, > NULL, 0, &response); > @@ -562,7 +562,6 @@ static int hidpp10_set_register(struct hidpp_device > *hidpp_dev, > params[byte] |= value & mask; > > return hidpp_send_rap_command_sync(hidpp_dev, > - REPORT_ID_HIDPP_SHORT, > HIDPP_SET_REGISTER, > register_address, > params, 3, &response); > @@ -658,7 +657,6 @@ static int hidpp10_query_battery_status(struct > hidpp_device *hidpp) > int ret, status; > > ret = hidpp_send_rap_command_sync(hidpp, > - REPORT_ID_HIDPP_SHORT, > HIDPP_GET_REGISTER, > HIDPP_REG_BATTERY_STATUS, > NULL, 0, &response); > @@ -710,7 +708,6 @@ static int hidpp10_query_battery_mileage(struct > hidpp_device *hidpp) > int ret, status; > > ret = hidpp_send_rap_command_sync(hidpp, > - REPORT_ID_HIDPP_SHORT, > HIDPP_GET_REGISTER, > HIDPP_REG_BATTERY_MILEAGE, > NULL, 0, &response); > @@ -782,7 +779,6 @@ static char *hidpp_unifying_get_name(struct > hidpp_device *hidpp_dev) > int len; > > ret = hidpp_send_rap_command_sync(hidpp_dev, > - REPORT_ID_HIDPP_SHORT, > HIDPP_GET_LONG_REGISTER, > HIDPP_REG_PAIRING_INFORMATION, > params, 1, &response); > @@ -816,7 +812,6 @@ static int hidpp_unifying_get_serial(struct > hidpp_device *hidpp, u32 *serial) > u8 params[1] = { HIDPP_EXTENDED_PAIRING }; > > ret = hidpp_send_rap_command_sync(hidpp, > - REPORT_ID_HIDPP_SHORT, > HIDPP_GET_LONG_REGISTER, > HIDPP_REG_PAIRING_INFORMATION, > params, 1, &response); > @@ -900,7 +895,6 @@ static int hidpp_root_get_protocol_version(struct > hidpp_device *hidpp) > int ret; > > ret = hidpp_send_rap_command_sync(hidpp, > - REPORT_ID_HIDPP_SHORT, > HIDPP_PAGE_ROOT_IDX, > CMD_ROOT_GET_PROTOCOL_VERSION, > ping_data, sizeof(ping_data), &response); > @@ -3180,7 +3174,6 @@ static int m560_send_config_command(struct > hid_device *hdev, bool connected) > > return hidpp_send_rap_command_sync( > hidpp_dev, > - REPORT_ID_HIDPP_SHORT, > M560_SUB_ID, > M560_BUTTON_MODE_REGISTER, > (u8 *)m560_config_parameter, > @@ -3719,7 +3712,6 @@ static int hidpp_initialize_hires_scroll(struct > hidpp_device *hidpp) > struct hidpp_report response; > > ret = hidpp_send_rap_command_sync(hidpp, > - REPORT_ID_HIDPP_SHORT, > HIDPP_GET_REGISTER, > > HIDPP_ENABLE_FAST_SCROLL, > NULL, 0, &response); > Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - Your patch is malformed (tabs converted to spaces, linewrapped, etc.) and can not be applied. Please read the file, Documentation/email-clients.txt in order to fix this. - Your patch does not have a Signed-off-by: line. Please read the kernel file, Documentation/SubmittingPatches and resend it after adding that line. Note, the line needs to be in the body of the email, before the patch, not at the bottom of the patch or in the email signature. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 898691a77a58..20ae7f73ef08 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -360,15 +360,16 @@ static int hidpp_send_fap_command_sync(struct hidpp_device *hidpp, } static int hidpp_send_rap_command_sync(struct hidpp_device *hidpp_dev, - u8 report_id, u8 sub_id, u8 reg_address, u8 *params, int param_count, + u8 sub_id, u8 reg_address, u8 *params, int param_count, struct hidpp_report *response) { struct hidpp_report *message; int ret, max_count; + u8 report_id; - /* Send as long report if short reports are not supported. */ - if (report_id == REPORT_ID_HIDPP_SHORT && - !(hidpp_dev->supported_reports & HIDPP_REPORT_SHORT_SUPPORTED)) + if (hidpp_dev->supported_reports & HIDPP_REPORT_SHORT_SUPPORTED) + report_id = REPORT_ID_HIDPP_SHORT; + else
Inside function, report_id might get overwritten. Only REPORT_ID_HIDPP_SHORT is ever passed in. So there seems to be no point in passing report_id in the first place. Just directly evaluate which report_id to use in the function itself. report_id = REPORT_ID_HIDPP_LONG; switch (report_id) { @@ -549,7 +550,6 @@ static int hidpp10_set_register(struct hidpp_device *hidpp_dev, u8 params[3] = { 0 }; ret = hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, HIDPP_GET_REGISTER, register_address, NULL, 0, &response); @@ -562,7 +562,6 @@ static int hidpp10_set_register(struct hidpp_device *hidpp_dev, params[byte] |= value & mask; return hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, HIDPP_SET_REGISTER, register_address, params, 3, &response); @@ -658,7 +657,6 @@ static int hidpp10_query_battery_status(struct hidpp_device *hidpp) int ret, status; ret = hidpp_send_rap_command_sync(hidpp, - REPORT_ID_HIDPP_SHORT, HIDPP_GET_REGISTER, HIDPP_REG_BATTERY_STATUS, NULL, 0, &response); @@ -710,7 +708,6 @@ static int hidpp10_query_battery_mileage(struct hidpp_device *hidpp) int ret, status; ret = hidpp_send_rap_command_sync(hidpp, - REPORT_ID_HIDPP_SHORT, HIDPP_GET_REGISTER, HIDPP_REG_BATTERY_MILEAGE, NULL, 0, &response); @@ -782,7 +779,6 @@ static char *hidpp_unifying_get_name(struct hidpp_device *hidpp_dev) int len; ret = hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, HIDPP_GET_LONG_REGISTER, HIDPP_REG_PAIRING_INFORMATION, params, 1, &response); @@ -816,7 +812,6 @@ static int hidpp_unifying_get_serial(struct hidpp_device *hidpp, u32 *serial) u8 params[1] = { HIDPP_EXTENDED_PAIRING }; ret = hidpp_send_rap_command_sync(hidpp, - REPORT_ID_HIDPP_SHORT, HIDPP_GET_LONG_REGISTER, HIDPP_REG_PAIRING_INFORMATION, params, 1, &response); @@ -900,7 +895,6 @@ static int hidpp_root_get_protocol_version(struct hidpp_device *hidpp) int ret; ret = hidpp_send_rap_command_sync(hidpp, - REPORT_ID_HIDPP_SHORT, HIDPP_PAGE_ROOT_IDX, CMD_ROOT_GET_PROTOCOL_VERSION, ping_data, sizeof(ping_data), &response); @@ -3180,7 +3174,6 @@ static int m560_send_config_command(struct hid_device *hdev, bool connected) return hidpp_send_rap_command_sync( hidpp_dev, - REPORT_ID_HIDPP_SHORT, M560_SUB_ID, M560_BUTTON_MODE_REGISTER, (u8 *)m560_config_parameter, @@ -3719,7 +3712,6 @@ static int hidpp_initialize_hires_scroll(struct hidpp_device *hidpp) struct hidpp_report response; ret = hidpp_send_rap_command_sync(hidpp, - REPORT_ID_HIDPP_SHORT, HIDPP_GET_REGISTER, HIDPP_ENABLE_FAST_SCROLL, NULL, 0, &response);