| Message ID | 20221031-gpiolib-swnode-v2-6-81f55af5fa0e@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Add support for software nodes to gpiolib | expand |
On Tue, Nov 08, 2022 at 04:26:51PM -0800, Dmitry Torokhov wrote: > Now that static device properties understand notion of child nodes and > references, let's teach gpiolib to handle them: > > - GPIOs are represented as a references to software nodes representing > gpiochip > - references must have 2 arguments - GPIO number within the chip and > GPIO flags (GPIO_ACTIVE_LOW/GPIO_ACTIVE_HIGH, etc) > - a new PROPERTY_ENTRY_GPIO() macro is supplied to ensure the above > - name of the software node representing gpiochip must match label of > the gpiochip, as we use it to locate gpiochip structure at runtime > > The following illustrates use of software nodes to describe a "System" > button that is currently specified via use of gpio_keys_platform_data > in arch/mips/alchemy/board-mtx1.c. It follows bindings specified in > Documentation/devicetree/bindings/input/gpio-keys.yaml. > > static const struct software_node mxt1_gpiochip2_node = { > .name = "alchemy-gpio2", > }; > > static const struct property_entry mtx1_gpio_button_props[] = { > PROPERTY_ENTRY_U32("linux,code", BTN_0), > PROPERTY_ENTRY_STRING("label", "System button"), > PROPERTY_ENTRY_GPIO("gpios", &mxt1_gpiochip2_node, 7, GPIO_ACTIVE_LOW), > { } > }; > > Similarly, arch/arm/mach-tegra/board-paz00.c can be converted to: > > static const struct software_node tegra_gpiochip_node = { > .name = "tegra-gpio", > }; > > static struct property_entry wifi_rfkill_prop[] __initdata = { > PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), > PROPERTY_ENTRY_STRING("type", "wlan"), > PROPERTY_ENTRY_GPIO("reset-gpios", > &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH); > PROPERTY_ENTRY_GPIO("shutdown-gpios", > &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH); > { }, > }; > > static struct platform_device wifi_rfkill_device = { > .name = "rfkill_gpio", > .id = -1, > }; > > ... > > software_node_register(&tegra_gpiochip_node); > device_create_managed_software_node(&wifi_rfkill_device.dev, > wifi_rfkill_prop, NULL); ... > +static struct gpio_chip *swnode_get_chip(struct fwnode_handle *fwnode) > +{ > + const struct software_node *chip_node; > + struct gpio_chip *chip; > + > + chip_node = to_software_node(fwnode); > + if (!chip_node || !chip_node->name) > + return ERR_PTR(-EINVAL); > + chip = gpiochip_find((void *)chip_node->name, > + swnode_gpiochip_match_name); One line? > + if (!chip) > + return ERR_PTR(-EPROBE_DEFER); > + > + return chip; As below you can use Elvis here as well, up to you. return chip ?: ERR_PTR(...); > +} ... > + desc = gpiochip_get_desc(chip, args.args[0]); > + *flags = args.args[1]; /* We expect native GPIO flags */ > + > + pr_debug("%s: parsed '%s' property of node '%pfwP[%d]' - status (%d)\n", > + __func__, propname, fwnode, idx, PTR_ERR_OR_ZERO(desc)); %pe ? > + return desc; ... > + while (fwnode_property_get_reference_args(fwnode, propname, NULL, > + 0, count, &args) == 0) { I would move 0 to the previous line. > + fwnode_handle_put(args.fwnode); > + count++; > + } ... > int gpiod_count(struct device *dev, const char *con_id) > { > - const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL; > - int count = -ENOENT; > + struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL; Why dropping const? > + int count; Why this change is needed? > if (is_of_node(fwnode)) > count = of_gpio_get_count(dev, con_id); > else if (is_acpi_node(fwnode)) > count = acpi_gpio_count(dev, con_id); > + else if (is_software_node(fwnode)) > + count = swnode_gpio_count(fwnode, con_id); > + else > + count = -ENOENT; ... > +#include <dt-bindings/gpio/gpio.h> Not sure why we have this here. > +#include <linux/property.h> > + > +#define PROPERTY_ENTRY_GPIO(_name_, _chip_node_, _idx_, _flags_) \ > + PROPERTY_ENTRY_REF(_name_, _chip_node_, _idx_, _flags_)
On Wed, Nov 09, 2022 at 01:20:46PM +0200, Andy Shevchenko wrote: > On Tue, Nov 08, 2022 at 04:26:51PM -0800, Dmitry Torokhov wrote: > > Now that static device properties understand notion of child nodes and > > references, let's teach gpiolib to handle them: > > > > - GPIOs are represented as a references to software nodes representing > > gpiochip > > - references must have 2 arguments - GPIO number within the chip and > > GPIO flags (GPIO_ACTIVE_LOW/GPIO_ACTIVE_HIGH, etc) > > - a new PROPERTY_ENTRY_GPIO() macro is supplied to ensure the above > > - name of the software node representing gpiochip must match label of > > the gpiochip, as we use it to locate gpiochip structure at runtime > > > > The following illustrates use of software nodes to describe a "System" > > button that is currently specified via use of gpio_keys_platform_data > > in arch/mips/alchemy/board-mtx1.c. It follows bindings specified in > > Documentation/devicetree/bindings/input/gpio-keys.yaml. > > > > static const struct software_node mxt1_gpiochip2_node = { > > .name = "alchemy-gpio2", > > }; > > > > static const struct property_entry mtx1_gpio_button_props[] = { > > PROPERTY_ENTRY_U32("linux,code", BTN_0), > > PROPERTY_ENTRY_STRING("label", "System button"), > > PROPERTY_ENTRY_GPIO("gpios", &mxt1_gpiochip2_node, 7, GPIO_ACTIVE_LOW), > > { } > > }; > > > > Similarly, arch/arm/mach-tegra/board-paz00.c can be converted to: > > > > static const struct software_node tegra_gpiochip_node = { > > .name = "tegra-gpio", > > }; > > > > static struct property_entry wifi_rfkill_prop[] __initdata = { > > PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), > > PROPERTY_ENTRY_STRING("type", "wlan"), > > PROPERTY_ENTRY_GPIO("reset-gpios", > > &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH); > > PROPERTY_ENTRY_GPIO("shutdown-gpios", > > &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH); > > { }, > > }; > > > > static struct platform_device wifi_rfkill_device = { > > .name = "rfkill_gpio", > > .id = -1, > > }; > > > > ... > > > > software_node_register(&tegra_gpiochip_node); > > device_create_managed_software_node(&wifi_rfkill_device.dev, > > wifi_rfkill_prop, NULL); > > ... > > > +static struct gpio_chip *swnode_get_chip(struct fwnode_handle *fwnode) > > +{ > > + const struct software_node *chip_node; > > + struct gpio_chip *chip; > > + > > + chip_node = to_software_node(fwnode); > > + if (!chip_node || !chip_node->name) > > + return ERR_PTR(-EINVAL); > > > + chip = gpiochip_find((void *)chip_node->name, > > + swnode_gpiochip_match_name); > > One line? OK. > > > + if (!chip) > > + return ERR_PTR(-EPROBE_DEFER); > > + > > + return chip; > > As below you can use Elvis here as well, up to you. > > return chip ?: ERR_PTR(...); OK. > > > +} > > ... > > > + desc = gpiochip_get_desc(chip, args.args[0]); > > + *flags = args.args[1]; /* We expect native GPIO flags */ > > + > > + pr_debug("%s: parsed '%s' property of node '%pfwP[%d]' - status (%d)\n", > > + __func__, propname, fwnode, idx, PTR_ERR_OR_ZERO(desc)); > > %pe ? "/* %pe with a non-ERR_PTR gets treated as plain %p */". I do not think users are interested in the address on success. > > > + return desc; > > ... > > > + while (fwnode_property_get_reference_args(fwnode, propname, NULL, > > + 0, count, &args) == 0) { > > I would move 0 to the previous line. OK. > > > + fwnode_handle_put(args.fwnode); > > + count++; > > + } > > ... > > > int gpiod_count(struct device *dev, const char *con_id) > > { > > - const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL; > > - int count = -ENOENT; > > + struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL; > > Why dropping const? Restored. > > > + int count; > > Why this change is needed? Restored. > > > if (is_of_node(fwnode)) > > count = of_gpio_get_count(dev, con_id); > > else if (is_acpi_node(fwnode)) > > count = acpi_gpio_count(dev, con_id); > > + else if (is_software_node(fwnode)) > > + count = swnode_gpio_count(fwnode, con_id); > > + else > > + count = -ENOENT; > > ... > > > +#include <dt-bindings/gpio/gpio.h> > > Not sure why we have this here. For convenience - so that users have access to GPIO_ACTIVE_HIGH/ GPIO_ACTIVE_LOW and other flags. > > > +#include <linux/property.h> > > + > > +#define PROPERTY_ENTRY_GPIO(_name_, _chip_node_, _idx_, _flags_) \ > > + PROPERTY_ENTRY_REF(_name_, _chip_node_, _idx_, _flags_) > Thanks.
On Wed, Nov 09, 2022 at 11:08:07AM -0800, Dmitry Torokhov wrote: > On Wed, Nov 09, 2022 at 01:20:46PM +0200, Andy Shevchenko wrote: > > On Tue, Nov 08, 2022 at 04:26:51PM -0800, Dmitry Torokhov wrote: ... > > > + pr_debug("%s: parsed '%s' property of node '%pfwP[%d]' - status (%d)\n", > > > + __func__, propname, fwnode, idx, PTR_ERR_OR_ZERO(desc)); > > > > %pe ? > > "/* %pe with a non-ERR_PTR gets treated as plain %p */". > > I do not think users are interested in the address on success. Hmm... Perhaps we can teach %pe to behave differently with, e.g. %pe0, modification. But this is another story. So, let's go with your variant. ... > > > +#include <dt-bindings/gpio/gpio.h> > > > > Not sure why we have this here. > > For convenience - so that users have access to GPIO_ACTIVE_HIGH/ > GPIO_ACTIVE_LOW and other flags. Okay, would we make this as a guarantee then? In such case a comment before this inclusion should be added to explain why we do that without any actual user to be present in the header file.
On Thu, Nov 10, 2022 at 03:48:02PM +0200, Andy Shevchenko wrote: > On Wed, Nov 09, 2022 at 11:08:07AM -0800, Dmitry Torokhov wrote: > > On Wed, Nov 09, 2022 at 01:20:46PM +0200, Andy Shevchenko wrote: > > > On Tue, Nov 08, 2022 at 04:26:51PM -0800, Dmitry Torokhov wrote: > > ... > > > > > + pr_debug("%s: parsed '%s' property of node '%pfwP[%d]' - status (%d)\n", > > > > + __func__, propname, fwnode, idx, PTR_ERR_OR_ZERO(desc)); > > > > > > %pe ? > > > > "/* %pe with a non-ERR_PTR gets treated as plain %p */". > > > > I do not think users are interested in the address on success. > > Hmm... Perhaps we can teach %pe to behave differently with, e.g. %pe0, > modification. Yes, and maybe we could even have %e for normal errors ;) > But this is another story. So, let's go with your variant. > > ... > > > > > +#include <dt-bindings/gpio/gpio.h> > > > > > > Not sure why we have this here. > > > > For convenience - so that users have access to GPIO_ACTIVE_HIGH/ > > GPIO_ACTIVE_LOW and other flags. > > Okay, would we make this as a guarantee then? > > In such case a comment before this inclusion should be added to explain why > we do that without any actual user to be present in the header file. Just to close the loop - I added a comment reflecting this in v3. Thanks.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 8629e9eaf79e..010587025fc8 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_CDEV) += gpiolib-cdev.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o +obj-$(CONFIG_GPIOLIB) += gpiolib-swnode.o # Device drivers. Generally keep list sorted alphabetically obj-$(CONFIG_GPIO_REGMAP) += gpio-regmap.o diff --git a/drivers/gpio/gpiolib-swnode.c b/drivers/gpio/gpiolib-swnode.c new file mode 100644 index 000000000000..4cf41234bfc6 --- /dev/null +++ b/drivers/gpio/gpiolib-swnode.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Software Node helpers for the GPIO API + * + * Copyright 2022 Google LLC + */ +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/printk.h> +#include <linux/property.h> +#include <linux/string.h> + +#include "gpiolib.h" +#include "gpiolib-swnode.h" + +static void swnode_format_propname(const char *con_id, char *propname, + size_t max_size) +{ + /* + * Note we do not need to try both -gpios and -gpio suffixes, + * as, unlike OF and ACPI, we can fix software nodes to conform + * to the proper binding. + */ + if (con_id) + snprintf(propname, max_size, "%s-gpios", con_id); + else + strscpy(propname, "gpios", max_size); +} + +static int swnode_gpiochip_match_name(struct gpio_chip *chip, void *data) +{ + return !strcmp(chip->label, data); +} + +static struct gpio_chip *swnode_get_chip(struct fwnode_handle *fwnode) +{ + const struct software_node *chip_node; + struct gpio_chip *chip; + + chip_node = to_software_node(fwnode); + if (!chip_node || !chip_node->name) + return ERR_PTR(-EINVAL); + + chip = gpiochip_find((void *)chip_node->name, + swnode_gpiochip_match_name); + if (!chip) + return ERR_PTR(-EPROBE_DEFER); + + return chip; +} + +struct gpio_desc *swnode_find_gpio(struct fwnode_handle *fwnode, + const char *con_id, unsigned int idx, + unsigned long *flags) +{ + const struct software_node *swnode; + struct fwnode_reference_args args; + struct gpio_chip *chip; + struct gpio_desc *desc; + char propname[32]; /* 32 is max size of property name */ + int error; + + swnode = to_software_node(fwnode); + if (!swnode) + return ERR_PTR(-EINVAL); + + swnode_format_propname(con_id, propname, sizeof(propname)); + + /* + * We expect all swnode-described GPIOs have GPIO number and + * polarity arguments, hence nargs is set to 2. + */ + error = fwnode_property_get_reference_args(fwnode, propname, NULL, + 2, idx, &args); + if (error) { + pr_debug("%s: can't parse '%s' property of node '%pfwP[%d]'\n", + __func__, propname, fwnode, idx); + return ERR_PTR(error); + } + + chip = swnode_get_chip(args.fwnode); + fwnode_handle_put(args.fwnode); + if (IS_ERR(chip)) + return ERR_CAST(chip); + + desc = gpiochip_get_desc(chip, args.args[0]); + *flags = args.args[1]; /* We expect native GPIO flags */ + + pr_debug("%s: parsed '%s' property of node '%pfwP[%d]' - status (%d)\n", + __func__, propname, fwnode, idx, PTR_ERR_OR_ZERO(desc)); + + return desc; +} + +/** + * swnode_gpio_count - count the GPIOs associated with a device / function + * @fwnode: firmware node of the GPIO consumer, can be %NULL for + * system-global GPIOs + * @con_id: function within the GPIO consumer + * + * Return: + * The number of GPIOs associated with a device / function or %-ENOENT, + * if no GPIO has been assigned to the requested function. + */ +int swnode_gpio_count(struct fwnode_handle *fwnode, const char *con_id) +{ + struct fwnode_reference_args args; + char propname[32]; + int count; + + swnode_format_propname(con_id, propname, sizeof(propname)); + + /* + * This is not very efficient, but GPIO lists usually have only + * 1 or 2 entries. + */ + count = 0; + while (fwnode_property_get_reference_args(fwnode, propname, NULL, + 0, count, &args) == 0) { + fwnode_handle_put(args.fwnode); + count++; + } + + return count ?: -ENOENT; +} diff --git a/drivers/gpio/gpiolib-swnode.h b/drivers/gpio/gpiolib-swnode.h new file mode 100644 index 000000000000..4e07be56ed9f --- /dev/null +++ b/drivers/gpio/gpiolib-swnode.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef GPIOLIB_SWNODE_H +#define GPIOLIB_SWNODE_H + +struct fwnode_handle; +struct gpio_desc; + +struct gpio_desc *swnode_find_gpio(struct fwnode_handle *fwnode, + const char *con_id, unsigned int idx, + unsigned long *flags); +int swnode_gpio_count(struct fwnode_handle *fwnode, const char *con_id); + +#endif /* GPIOLIB_SWNODE_H */ diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index c33ffdd47667..bf5c072206da 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -26,6 +26,7 @@ #include "gpiolib.h" #include "gpiolib-of.h" #include "gpiolib-acpi.h" +#include "gpiolib-swnode.h" #include "gpiolib-cdev.h" #include "gpiolib-sysfs.h" @@ -3821,6 +3822,9 @@ static struct gpio_desc *gpiod_find_by_fwnode(struct fwnode_handle *fwnode, } else if (is_acpi_node(fwnode)) { dev_dbg(consumer, "using ACPI for GPIO lookup\n"); desc = acpi_find_gpio(fwnode, con_id, idx, flags, lookupflags); + } else if (is_software_node(fwnode)) { + dev_dbg(consumer, "using software node for GPIO lookup\n"); + desc = swnode_find_gpio(fwnode, con_id, idx, lookupflags); } else { desc = ERR_PTR(-ENOENT); } @@ -3934,13 +3938,17 @@ EXPORT_SYMBOL_GPL(fwnode_gpiod_get_index); */ int gpiod_count(struct device *dev, const char *con_id) { - const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL; - int count = -ENOENT; + struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL; + int count; if (is_of_node(fwnode)) count = of_gpio_get_count(dev, con_id); else if (is_acpi_node(fwnode)) count = acpi_gpio_count(dev, con_id); + else if (is_software_node(fwnode)) + count = swnode_gpio_count(fwnode, con_id); + else + count = -ENOENT; if (count < 0) count = platform_gpio_count(dev, con_id); diff --git a/include/linux/gpio/property.h b/include/linux/gpio/property.h new file mode 100644 index 000000000000..f76a46469f66 --- /dev/null +++ b/include/linux/gpio/property.h @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +#ifndef __LINUX_GPIO_PROPERTY_H +#define __LINUX_GPIO_PROPERTY_H + +#include <dt-bindings/gpio/gpio.h> +#include <linux/property.h> + +#define PROPERTY_ENTRY_GPIO(_name_, _chip_node_, _idx_, _flags_) \ + PROPERTY_ENTRY_REF(_name_, _chip_node_, _idx_, _flags_) + +#endif /* __LINUX_GPIO_PROPERTY_H */
Now that static device properties understand notion of child nodes and references, let's teach gpiolib to handle them: - GPIOs are represented as a references to software nodes representing gpiochip - references must have 2 arguments - GPIO number within the chip and GPIO flags (GPIO_ACTIVE_LOW/GPIO_ACTIVE_HIGH, etc) - a new PROPERTY_ENTRY_GPIO() macro is supplied to ensure the above - name of the software node representing gpiochip must match label of the gpiochip, as we use it to locate gpiochip structure at runtime The following illustrates use of software nodes to describe a "System" button that is currently specified via use of gpio_keys_platform_data in arch/mips/alchemy/board-mtx1.c. It follows bindings specified in Documentation/devicetree/bindings/input/gpio-keys.yaml. static const struct software_node mxt1_gpiochip2_node = { .name = "alchemy-gpio2", }; static const struct property_entry mtx1_gpio_button_props[] = { PROPERTY_ENTRY_U32("linux,code", BTN_0), PROPERTY_ENTRY_STRING("label", "System button"), PROPERTY_ENTRY_GPIO("gpios", &mxt1_gpiochip2_node, 7, GPIO_ACTIVE_LOW), { } }; Similarly, arch/arm/mach-tegra/board-paz00.c can be converted to: static const struct software_node tegra_gpiochip_node = { .name = "tegra-gpio", }; static struct property_entry wifi_rfkill_prop[] __initdata = { PROPERTY_ENTRY_STRING("name", "wifi_rfkill"), PROPERTY_ENTRY_STRING("type", "wlan"), PROPERTY_ENTRY_GPIO("reset-gpios", &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH); PROPERTY_ENTRY_GPIO("shutdown-gpios", &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH); { }, }; static struct platform_device wifi_rfkill_device = { .name = "rfkill_gpio", .id = -1, }; ... software_node_register(&tegra_gpiochip_node); device_create_managed_software_node(&wifi_rfkill_device.dev, wifi_rfkill_prop, NULL); Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/gpio/Makefile | 1 + drivers/gpio/gpiolib-swnode.c | 128 ++++++++++++++++++++++++++++++++++++++++++ drivers/gpio/gpiolib-swnode.h | 14 +++++ drivers/gpio/gpiolib.c | 12 +++- include/linux/gpio/property.h | 11 ++++ 5 files changed, 164 insertions(+), 2 deletions(-)