mbox series

[v2,00/12] Enable Display for SM8350

Message ID 20221115133105.980877-1-robert.foss@linaro.org (mailing list archive)
Headers show
Series Enable Display for SM8350 | expand

Message

Robert Foss Nov. 15, 2022, 1:30 p.m. UTC 
Dependencies:
https://lore.kernel.org/all/20221102231309.583587-1-dmitry.baryshkov@linaro.org/
https://lore.kernel.org/all/20221024164225.3236654-1-dmitry.baryshkov@linaro.org/
https://lore.kernel.org/all/20221104130324.1024242-5-dmitry.baryshkov@linaro.org/

Branch:
https://git.linaro.org/people/robert.foss/linux.git/log/?h=sm8350_dsi_v2

This series implements display support for SM8350 and
enables HDMI output for the SM8350-HDK platform.


Changes from v1:
 - Added R-b tags from v1
 - Added qcom,sm8350-dpu binding patch
 - Added qcom,sm8350-mdss binding patch
 - Corrected sm8350.dtsi according to new dpu/mdss bindings
 - Bjorn: Removed regulator-always-on property from lt9611_1v2 regulator
 - Bjorn: Moved lt9611 pinctl pins into a common node
 - Bjorn/Krzysztof: Moved status property to last in node
 - Krzysztof: Changed hdmi-out to hdmi-connector
 - Krzysztof: Fixed regulator node name
 - Krzysztof: Changed &mdss to status=disabled as default
 - Krzysztof: Changed &mdss_mdp node name to display-controller
 - Krzysztof: Fixed opp-table node name
 - Krzysztof: Fixed phy node name
 - Dmitry: Split commit containing dpu & mdss compatibles string
 - Dmitry: Added msm_mdss_enable case
 - Dmitry: Fixed dpu ctl features
 


Robert Foss (12):
  dt-bindings: display: msm: Add qcom,sm8350-dpu binding
  dt-bindings: display: msm: Add qcom,sm8350-mdss binding
  drm/msm/dpu: Refactor sc7280_pp location
  drm/msm/dpu: Add SM8350 to hw catalog
  drm/msm/dpu: Add support for SM8350
  drm/msm: Add support for SM8350
  arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names
  arm64: dts: qcom: sm8350: Remove mmxc power-domain-name
  arm64: dts: qcom: sm8350: Use 2 interconnect cells
  arm64: dts: qcom: sm8350: Add display system nodes
  arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
  arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge

 .../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 +++++++
 .../display/msm/qcom,sm8350-mdss.yaml         | 240 +++++++++++++
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts       | 332 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          | 226 +++++++++++-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 210 ++++++++++-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                |   4 +
 8 files changed, 1108 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml

Comments

Krzysztof Kozlowski Nov. 15, 2022, 3:23 p.m. UTC | #1 
On 15/11/2022 14:30, Robert Foss wrote:
> Dependencies:
> https://lore.kernel.org/all/20221102231309.583587-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221024164225.3236654-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221104130324.1024242-5-dmitry.baryshkov@linaro.org/
> 
> Branch:
> https://git.linaro.org/people/robert.foss/linux.git/log/?h=sm8350_dsi_v2
> 
> This series implements display support for SM8350 and
> enables HDMI output for the SM8350-HDK platform.
> 

I received two of these patchsets... Which one is valid? Folks also
review in both...

Best regards,
Krzysztof