| Message ID | 20221108092107.28996-2-zhuyinbo@loongson.cn (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v1,1/2] gpio: loongson: add dts/acpi gpio support | expand |
Hi Yinbo, thanks for your patch! On Tue, Nov 8, 2022 at 10:21 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote: > Add the Loongson series gpio binding with DT schema format using > json-schema. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > + gpio-ranges: true So you are using GPIO ranges... and... > + loongson,gpio_base: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + This option indicate the first GPIO number in this node. Then you have added this to reimplement gpio ranges. It also shows in the driver. Drop gpio_base altogether (we do not encode linux-specific properties into the device trees) and use gpio-ranges as they are intended to map between the GPIO numberspace and the pin control pin number space. See Documentation/devicetree/bindings/gpio/gpio.txt for documentation on gpio-ranges, also look how other drivers are using them. Yours, Linus Walleij
On 08/11/2022 10:21, Yinbo Zhu wrote: > Add the Loongson series gpio binding with DT schema format using > json-schema. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > --- > .../bindings/gpio/loongson,ls-gpio.yaml | 154 ++++++++++++++++++ > MAINTAINERS | 11 ++ > 2 files changed, 165 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml > new file mode 100644 > index 000000000000..9d335262ddcc > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml > @@ -0,0 +1,154 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpio/loongson,ls-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Loongson series GPIO controller. > + > +maintainers: > + - Yinbo Zhu <zhuyinbo@loongson.cn> > + > +properties: > + compatible: > + enum: > + - loongson,ls2k-gpio > + - loongson,ls7a-gpio > + > + reg: > + maxItems: 1 > + > + ngpios: true minimum? maximum? > + > + "#gpio-cells": > + const: 2 > + > + gpio-controller: true > + > + gpio-ranges: true > + > + loongson,conf_offset: No underscores in node names. Plus comments from Linus seem to apply here as well. Drop it entirely or explain why this is not part of compatible, why this is needed and why encoding programming model address in DT matches the DT... > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + This option indicate this GPIO configuration offset address. > + > + loongson,out_offset: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + This option indicate this GPIO output value offset address. Drop > + > + loongson,in_offset: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + This option indicate this GPIO input value offset address. Drop > + > + loongson,gpio_base: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + This option indicate the first GPIO number in this node. Drop > + > + loongson,support_irq: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + This option indicate this GPIO whether support interrupt. Drop > + > + interrupts: > + minItems: 1 > + maxItems: 64 > + > +required: > + - compatible > + - reg > + - ngpios > + - "#gpio-cells" > + - gpio-controller > + - gpio-ranges > + - interrupts > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + gpio0: gpio@1fe00500 { > + compatible = "loongson,ls2k-gpio"; > + reg = <0x1fe00500 0x38>; > + ngpios = <64>; > + #gpio-cells = <2>; > + gpio-controller; > + gpio-ranges = <&pctrl 0 0 15>, > + <&pctrl 16 16 15>, > + <&pctrl 32 32 10>, > + <&pctrl 44 44 20>; > + loongson,conf_offset = <0>; > + loongson,out_offset = <0x10>; > + loongson,in_offset = <0x20>; > + loongson,gpio_base = <0>; > + loongson,support_irq; > + interrupt-parent = <&liointc1>; > + interrupts = <28 IRQ_TYPE_LEVEL_LOW>, > + <29 IRQ_TYPE_LEVEL_LOW>, > + <30 IRQ_TYPE_LEVEL_LOW>, > + <30 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <26 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <>, What's this? > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <>, > + <>, What's this? > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>, > + <27 IRQ_TYPE_LEVEL_LOW>; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 916b2d9cffc0..878b8320ac3b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -12048,6 +12048,17 @@ S: Maintained > F: Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml > F: drivers/soc/loongson/loongson2_guts.c > > +LOONGSON SERIES GPIO DRIVER > +M: Richard Liu, STMicroelectronics <richard.liu@st.com> > +M: Arnaud Patard <apatard@mandriva.com> > +M: Hongbing Hu <huhb@lemote.com> > +M: Huacai Chen <chenhuacai@kernel.org> > +M: Yinbo Zhu <zhuyinbo@loongson.cn> Are they all maintainers of this driver? > +L: linux-gpio@vger.kernel.org > +S: Maintained > +F: Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml > +F: drivers/gpio/gpio-loongson.c > + > LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) > M: Sathya Prakash <sathya.prakash@broadcom.com> > M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Best regards, Krzysztof
在 2022/11/8 下午11:28, Krzysztof Kozlowski 写道: > On 08/11/2022 10:21, Yinbo Zhu wrote: >> Add the Loongson series gpio binding with DT schema format using >> json-schema. >> >> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> >> --- >> .../bindings/gpio/loongson,ls-gpio.yaml | 154 ++++++++++++++++++ >> MAINTAINERS | 11 ++ >> 2 files changed, 165 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml >> >> diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml >> new file mode 100644 >> index 000000000000..9d335262ddcc >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml >> @@ -0,0 +1,154 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/gpio/loongson,ls-gpio.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Loongson series GPIO controller. >> + >> +maintainers: >> + - Yinbo Zhu <zhuyinbo@loongson.cn> >> + >> +properties: >> + compatible: >> + enum: >> + - loongson,ls2k-gpio >> + - loongson,ls7a-gpio >> + >> + reg: >> + maxItems: 1 >> + >> + ngpios: true > > minimum? maximum? okay, I got it. > >> + >> + "#gpio-cells": >> + const: 2 >> + >> + gpio-controller: true >> + >> + gpio-ranges: true >> + >> + loongson,conf_offset: > > No underscores in node names. Plus comments from Linus seem to apply > here as well. Drop it entirely or explain why this is not part of > compatible, why this is needed and why encoding programming model > address in DT matches the DT... Add it is to distinguish differnt address in different platform. and I had drop them and initial them in kernel driver that depend on diffent compatible. > > >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: >> + This option indicate this GPIO configuration offset address. >> + >> + loongson,out_offset: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: >> + This option indicate this GPIO output value offset address. > > Drop > >> + >> + loongson,in_offset: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: >> + This option indicate this GPIO input value offset address. > > Drop > > >> + >> + loongson,gpio_base: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: >> + This option indicate the first GPIO number in this node. > > Drop > > >> + >> + loongson,support_irq: >> + $ref: /schemas/types.yaml#/definitions/flag >> + description: >> + This option indicate this GPIO whether support interrupt. > > Drop > >> + >> + interrupts: >> + minItems: 1 >> + maxItems: 64 >> + >> +required: >> + - compatible >> + - reg >> + - ngpios >> + - "#gpio-cells" >> + - gpio-controller >> + - gpio-ranges >> + - interrupts >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/irq.h> >> + >> + gpio0: gpio@1fe00500 { >> + compatible = "loongson,ls2k-gpio"; >> + reg = <0x1fe00500 0x38>; >> + ngpios = <64>; >> + #gpio-cells = <2>; >> + gpio-controller; >> + gpio-ranges = <&pctrl 0 0 15>, >> + <&pctrl 16 16 15>, >> + <&pctrl 32 32 10>, >> + <&pctrl 44 44 20>; >> + loongson,conf_offset = <0>; >> + loongson,out_offset = <0x10>; >> + loongson,in_offset = <0x20>; >> + loongson,gpio_base = <0>; >> + loongson,support_irq; >> + interrupt-parent = <&liointc1>; >> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>, >> + <29 IRQ_TYPE_LEVEL_LOW>, >> + <30 IRQ_TYPE_LEVEL_LOW>, >> + <30 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <26 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <>, > > What's this? There was no interrupt function in this gpio. > >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <>, >> + <>, > > What's this? > >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>, >> + <27 IRQ_TYPE_LEVEL_LOW>; >> + }; >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 916b2d9cffc0..878b8320ac3b 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -12048,6 +12048,17 @@ S: Maintained >> F: Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml >> F: drivers/soc/loongson/loongson2_guts.c >> >> +LOONGSON SERIES GPIO DRIVER >> +M: Richard Liu, STMicroelectronics <richard.liu@st.com> >> +M: Arnaud Patard <apatard@mandriva.com> >> +M: Hongbing Hu <huhb@lemote.com> >> +M: Huacai Chen <chenhuacai@kernel.org> >> +M: Yinbo Zhu <zhuyinbo@loongson.cn> > > Are they all maintainers of this driver? add huacai and myself as maintainer. > >> +L: linux-gpio@vger.kernel.org >> +S: Maintained >> +F: Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml >> +F: drivers/gpio/gpio-loongson.c >> + >> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) >> M: Sathya Prakash <sathya.prakash@broadcom.com> >> M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> > > Best regards, > Krzysztof >
On 14/11/2022 10:50, Yinbo Zhu wrote: > >>> + >>> + "#gpio-cells": >>> + const: 2 >>> + >>> + gpio-controller: true >>> + >>> + gpio-ranges: true >>> + >>> + loongson,conf_offset: >> >> No underscores in node names. Plus comments from Linus seem to apply >> here as well. Drop it entirely or explain why this is not part of >> compatible, why this is needed and why encoding programming model >> address in DT matches the DT... > Add it is to distinguish differnt address in different platform. > and I had drop them and initial them in kernel driver that depend > on diffent compatible. >> So if you had to drop these, please drop from the bindings. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml new file mode 100644 index 000000000000..9d335262ddcc --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/loongson,ls-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson series GPIO controller. + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +properties: + compatible: + enum: + - loongson,ls2k-gpio + - loongson,ls7a-gpio + + reg: + maxItems: 1 + + ngpios: true + + "#gpio-cells": + const: 2 + + gpio-controller: true + + gpio-ranges: true + + loongson,conf_offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This option indicate this GPIO configuration offset address. + + loongson,out_offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This option indicate this GPIO output value offset address. + + loongson,in_offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This option indicate this GPIO input value offset address. + + loongson,gpio_base: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This option indicate the first GPIO number in this node. + + loongson,support_irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + This option indicate this GPIO whether support interrupt. + + interrupts: + minItems: 1 + maxItems: 64 + +required: + - compatible + - reg + - ngpios + - "#gpio-cells" + - gpio-controller + - gpio-ranges + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + gpio0: gpio@1fe00500 { + compatible = "loongson,ls2k-gpio"; + reg = <0x1fe00500 0x38>; + ngpios = <64>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pctrl 0 0 15>, + <&pctrl 16 16 15>, + <&pctrl 32 32 10>, + <&pctrl 44 44 20>; + loongson,conf_offset = <0>; + loongson,out_offset = <0x10>; + loongson,in_offset = <0x20>; + loongson,gpio_base = <0>; + loongson,support_irq; + interrupt-parent = <&liointc1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>, + <29 IRQ_TYPE_LEVEL_LOW>, + <30 IRQ_TYPE_LEVEL_LOW>, + <30 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <26 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <>, + <>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>, + <27 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 916b2d9cffc0..878b8320ac3b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12048,6 +12048,17 @@ S: Maintained F: Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml F: drivers/soc/loongson/loongson2_guts.c +LOONGSON SERIES GPIO DRIVER +M: Richard Liu, STMicroelectronics <richard.liu@st.com> +M: Arnaud Patard <apatard@mandriva.com> +M: Hongbing Hu <huhb@lemote.com> +M: Huacai Chen <chenhuacai@kernel.org> +M: Yinbo Zhu <zhuyinbo@loongson.cn> +L: linux-gpio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml +F: drivers/gpio/gpio-loongson.c + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <sathya.prakash@broadcom.com> M: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Add the Loongson series gpio binding with DT schema format using json-schema. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> --- .../bindings/gpio/loongson,ls-gpio.yaml | 154 ++++++++++++++++++ MAINTAINERS | 11 ++ 2 files changed, 165 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml