| Message ID | 20220909175522.179175-1-sebastian.reichel@collabora.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Introduce RK806 Support | expand |
On Fri, 9 Sep 2022 19:55:08 +0200, Sebastian Reichel wrote: > The Rockchip RK3588 Evaluation Boards use SPI connected RK806 > PMICs. Downstream this is handled by a new driver, but apart > from being SPI connected this chip is quite similar to the > ther Rockchip PMICs (also RK806 is promoted to also support > I2C). Thus this series instead updates RK808. > > Changelog since PATCHv2: > * https://lore.kernel.org/all/20220908003107.220143-1-sebastian.reichel@collabora.com/ > * Change DT binding to not allow nldo-reg6 > * Fix DT binding to check for [np]ldo-reg instead of [np]ldo_reg > * remove rk806_get_voltage_sel_regmap in favour of regulator_get_voltage_sel_regmap > * drop rk806_set_voltage in favour of regulator_set_voltage_sel_regmap > * use regulator_set_ramp_delay_regmap > * drop possibly incorrect printing of chip id register address in case of errors > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next Thanks! [11/14] regulator: rk808: Use dev_err_probe commit: f39f8709c217d82aabbf51d8669731137ce09aea All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
Hi, The Rockchip RK3588 Evaluation Boards use SPI connected RK806 PMICs. Downstream this is handled by a new driver, but apart from being SPI connected this chip is quite similar to the ther Rockchip PMICs (also RK806 is promoted to also support I2C). Thus this series instead updates RK808. Changelog since PATCHv2: * https://lore.kernel.org/all/20220908003107.220143-1-sebastian.reichel@collabora.com/ * Change DT binding to not allow nldo-reg6 * Fix DT binding to check for [np]ldo-reg instead of [np]ldo_reg * remove rk806_get_voltage_sel_regmap in favour of regulator_get_voltage_sel_regmap * drop rk806_set_voltage in favour of regulator_set_voltage_sel_regmap * use regulator_set_ramp_delay_regmap * drop possibly incorrect printing of chip id register address in case of errors Changelog since PATCHv1: * https://lore.kernel.org/all/20220831215437.117880-1-sebastian.reichel@collabora.com/ * Collect Acked-by * Avoid if/else checks for regulator id in rk806 regulator driver * Fix indentation in DTS example section of the rk806 binding * Use absolute path for regulator.yaml referencing in the rk806 binding * Reduce pattern for DCDC regulators to only allow 1-10 * replace uppercase name with lowercase ones in regulator names * replace _ with - in regulator names -- Sebastian Sebastian Reichel (14): mfd: rk808: convert to device managed resources mfd: rk808: use dev_err_probe clk: RK808: reduce 'struct rk808' usage regulator: rk808: reduce 'struct rk808' usage rtc: rk808: reduce 'struct rk808' usage mfd: rk808: replace 'struct i2c_client' with 'struct device' mfd: rk808: split into core and i2c dt-bindings: mfd: add rk806 binding mfd: rk8xx: add rk806 support pinctrl: rk805: add rk806 pinctrl support regulator: rk808: Use dev_err_probe regulator: expose regmap_find_closest_bigger regulator: rk808: add rk806 support ASoC: rk817: Remove 'select REGMAP_I2C' .../bindings/mfd/rockchip,rk806.yaml | 388 ++++++++++++++++ drivers/clk/clk-rk808.c | 34 +- drivers/mfd/Kconfig | 19 + drivers/mfd/Makefile | 4 +- drivers/mfd/{rk808.c => rk8xx-core.c} | 343 +++++--------- drivers/mfd/rk8xx-i2c.c | 203 +++++++++ drivers/mfd/rk8xx-spi.c | 128 ++++++ drivers/pinctrl/pinctrl-rk805.c | 189 +++++++- drivers/regulator/helpers.c | 20 +- drivers/regulator/rk808-regulator.c | 410 ++++++++++++++++- drivers/rtc/rtc-rk808.c | 47 +- include/linux/mfd/rk808.h | 417 +++++++++++++++++- include/linux/regulator/driver.h | 2 + sound/soc/codecs/Kconfig | 1 - 14 files changed, 1895 insertions(+), 310 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml rename drivers/mfd/{rk808.c => rk8xx-core.c} (71%) create mode 100644 drivers/mfd/rk8xx-i2c.c create mode 100644 drivers/mfd/rk8xx-spi.c