@@ -1042,7 +1042,7 @@ int vfio_mig_get_next_state(struct vfio_device *device,
enum vfio_device_mig_state new_fsm,
enum vfio_device_mig_state *next_fsm)
{
- enum { VFIO_DEVICE_NUM_STATES = VFIO_DEVICE_STATE_RUNNING_P2P + 1 };
+ enum { VFIO_DEVICE_NUM_STATES = VFIO_DEVICE_STATE_PRE_COPY_P2P + 1 };
/*
* The coding in this table requires the driver to implement the
* following FSM arcs:
@@ -1057,30 +1057,65 @@ int vfio_mig_get_next_state(struct vfio_device *device,
* RUNNING_P2P -> RUNNING
* RUNNING_P2P -> STOP
* STOP -> RUNNING_P2P
- * Without P2P the driver must implement:
+ *
+ * If precopy is supported then the driver must support these additional
+ * FSM arcs:
+ * RUNNING -> PRE_COPY
+ * PRE_COPY -> RUNNING
+ * PRE_COPY -> STOP_COPY
+ * However, if precopy and P2P are supported together then the driver
+ * must support these additional arcs beyond the P2P arcs above:
+ * PRE_COPY -> RUNNING
+ * PRE_COPY -> PRE_COPY_P2P
+ * PRE_COPY_P2P -> PRE_COPY
+ * PRE_COPY_P2P -> RUNNING_P2P
+ * PRE_COPY_P2P -> STOP_COPY
+ * RUNNING -> PRE_COPY
+ * RUNNING_P2P -> PRE_COPY_P2P
+ *
+ * Without P2P and precopy the driver must implement:
* RUNNING -> STOP
* STOP -> RUNNING
*
* The coding will step through multiple states for some combination
* transitions; if all optional features are supported, this means the
* following ones:
+ * PRE_COPY -> PRE_COPY_P2P -> STOP_COPY
+ * PRE_COPY -> RUNNING -> RUNNING_P2P
+ * PRE_COPY -> RUNNING -> RUNNING_P2P -> STOP
+ * PRE_COPY -> RUNNING -> RUNNING_P2P -> STOP -> RESUMING
+ * PRE_COPY_P2P -> RUNNING_P2P -> RUNNING
+ * PRE_COPY_P2P -> RUNNING_P2P -> STOP
+ * PRE_COPY_P2P -> RUNNING_P2P -> STOP -> RESUMING
* RESUMING -> STOP -> RUNNING_P2P
+ * RESUMING -> STOP -> RUNNING_P2P -> PRE_COPY_P2P
* RESUMING -> STOP -> RUNNING_P2P -> RUNNING
+ * RESUMING -> STOP -> RUNNING_P2P -> RUNNING -> PRE_COPY
* RESUMING -> STOP -> STOP_COPY
+ * RUNNING -> RUNNING_P2P -> PRE_COPY_P2P
* RUNNING -> RUNNING_P2P -> STOP
* RUNNING -> RUNNING_P2P -> STOP -> RESUMING
* RUNNING -> RUNNING_P2P -> STOP -> STOP_COPY
+ * RUNNING_P2P -> RUNNING -> PRE_COPY
* RUNNING_P2P -> STOP -> RESUMING
* RUNNING_P2P -> STOP -> STOP_COPY
+ * STOP -> RUNNING_P2P -> PRE_COPY_P2P
* STOP -> RUNNING_P2P -> RUNNING
+ * STOP -> RUNNING_P2P -> RUNNING -> PRE_COPY
* STOP_COPY -> STOP -> RESUMING
* STOP_COPY -> STOP -> RUNNING_P2P
* STOP_COPY -> STOP -> RUNNING_P2P -> RUNNING
+ *
+ * The following transitions are blocked:
+ * STOP_COPY -> PRE_COPY
+ * STOP_COPY -> PRE_COPY_P2P
*/
static const u8 vfio_from_fsm_table[VFIO_DEVICE_NUM_STATES][VFIO_DEVICE_NUM_STATES] = {
[VFIO_DEVICE_STATE_STOP] = {
[VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_RUNNING_P2P,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_RUNNING_P2P,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_RUNNING_P2P,
[VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_STOP_COPY,
[VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_RESUMING,
[VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_RUNNING_P2P,
@@ -1089,14 +1124,38 @@ int vfio_mig_get_next_state(struct vfio_device *device,
[VFIO_DEVICE_STATE_RUNNING] = {
[VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_RUNNING_P2P,
[VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_RUNNING,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_PRE_COPY,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_RUNNING_P2P,
[VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_RUNNING_P2P,
[VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_RUNNING_P2P,
[VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_RUNNING_P2P,
[VFIO_DEVICE_STATE_ERROR] = VFIO_DEVICE_STATE_ERROR,
},
+ [VFIO_DEVICE_STATE_PRE_COPY] = {
+ [VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_RUNNING,
+ [VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_RUNNING,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_PRE_COPY,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_PRE_COPY_P2P,
+ [VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_PRE_COPY_P2P,
+ [VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_RUNNING,
+ [VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_RUNNING,
+ [VFIO_DEVICE_STATE_ERROR] = VFIO_DEVICE_STATE_ERROR,
+ },
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = {
+ [VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_RUNNING_P2P,
+ [VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_RUNNING_P2P,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_PRE_COPY,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_PRE_COPY_P2P,
+ [VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_STOP_COPY,
+ [VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_RUNNING_P2P,
+ [VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_RUNNING_P2P,
+ [VFIO_DEVICE_STATE_ERROR] = VFIO_DEVICE_STATE_ERROR,
+ },
[VFIO_DEVICE_STATE_STOP_COPY] = {
[VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_STOP,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_ERROR,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_ERROR,
[VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_STOP_COPY,
[VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_STOP,
@@ -1105,6 +1164,8 @@ int vfio_mig_get_next_state(struct vfio_device *device,
[VFIO_DEVICE_STATE_RESUMING] = {
[VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_STOP,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_STOP,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_RESUMING,
[VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_STOP,
@@ -1113,6 +1174,8 @@ int vfio_mig_get_next_state(struct vfio_device *device,
[VFIO_DEVICE_STATE_RUNNING_P2P] = {
[VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_RUNNING,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_RUNNING,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_PRE_COPY_P2P,
[VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_STOP,
[VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_RUNNING_P2P,
@@ -1121,6 +1184,8 @@ int vfio_mig_get_next_state(struct vfio_device *device,
[VFIO_DEVICE_STATE_ERROR] = {
[VFIO_DEVICE_STATE_STOP] = VFIO_DEVICE_STATE_ERROR,
[VFIO_DEVICE_STATE_RUNNING] = VFIO_DEVICE_STATE_ERROR,
+ [VFIO_DEVICE_STATE_PRE_COPY] = VFIO_DEVICE_STATE_ERROR,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_DEVICE_STATE_ERROR,
[VFIO_DEVICE_STATE_STOP_COPY] = VFIO_DEVICE_STATE_ERROR,
[VFIO_DEVICE_STATE_RESUMING] = VFIO_DEVICE_STATE_ERROR,
[VFIO_DEVICE_STATE_RUNNING_P2P] = VFIO_DEVICE_STATE_ERROR,
@@ -1131,6 +1196,11 @@ int vfio_mig_get_next_state(struct vfio_device *device,
static const unsigned int state_flags_table[VFIO_DEVICE_NUM_STATES] = {
[VFIO_DEVICE_STATE_STOP] = VFIO_MIGRATION_STOP_COPY,
[VFIO_DEVICE_STATE_RUNNING] = VFIO_MIGRATION_STOP_COPY,
+ [VFIO_DEVICE_STATE_PRE_COPY] =
+ VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_PRE_COPY,
+ [VFIO_DEVICE_STATE_PRE_COPY_P2P] = VFIO_MIGRATION_STOP_COPY |
+ VFIO_MIGRATION_P2P |
+ VFIO_MIGRATION_PRE_COPY,
[VFIO_DEVICE_STATE_STOP_COPY] = VFIO_MIGRATION_STOP_COPY,
[VFIO_DEVICE_STATE_RESUMING] = VFIO_MIGRATION_STOP_COPY,
[VFIO_DEVICE_STATE_RUNNING_P2P] =
@@ -819,12 +819,20 @@ struct vfio_device_feature {
* VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P means that RUNNING_P2P
* is supported in addition to the STOP_COPY states.
*
+ * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_PRE_COPY means that
+ * PRE_COPY is supported in addition to the STOP_COPY states.
+ *
+ * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY
+ * means that RUNNING_P2P, PRE_COPY and PRE_COPY_P2P are supported
+ * in addition to the STOP_COPY states.
+ *
* Other combinations of flags have behavior to be defined in the future.
*/
struct vfio_device_feature_migration {
__aligned_u64 flags;
#define VFIO_MIGRATION_STOP_COPY (1 << 0)
#define VFIO_MIGRATION_P2P (1 << 1)
+#define VFIO_MIGRATION_PRE_COPY (1 << 2)
};
#define VFIO_DEVICE_FEATURE_MIGRATION 1
@@ -875,8 +883,13 @@ struct vfio_device_feature_mig_state {
* RESUMING - The device is stopped and is loading a new internal state
* ERROR - The device has failed and must be reset
*
- * And 1 optional state to support VFIO_MIGRATION_P2P:
+ * And optional states to support VFIO_MIGRATION_P2P:
* RUNNING_P2P - RUNNING, except the device cannot do peer to peer DMA
+ * And VFIO_MIGRATION_PRE_COPY:
+ * PRE_COPY - The device is running normally but tracking internal state
+ * changes
+ * And VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY:
+ * PRE_COPY_P2P - PRE_COPY, except the device cannot do peer to peer DMA
*
* The FSM takes actions on the arcs between FSM states. The driver implements
* the following behavior for the FSM arcs:
@@ -908,20 +921,48 @@ struct vfio_device_feature_mig_state {
*
* To abort a RESUMING session the device must be reset.
*
+ * PRE_COPY -> RUNNING
* RUNNING_P2P -> RUNNING
* While in RUNNING the device is fully operational, the device may generate
* interrupts, DMA, respond to MMIO, all vfio device regions are functional,
* and the device may advance its internal state.
*
+ * The PRE_COPY arc will terminate a data transfer session.
+ *
+ * PRE_COPY_P2P -> RUNNING_P2P
* RUNNING -> RUNNING_P2P
* STOP -> RUNNING_P2P
* While in RUNNING_P2P the device is partially running in the P2P quiescent
* state defined below.
*
+ * The PRE_COPY_P2P arc will terminate a data transfer session.
+ *
+ * RUNNING -> PRE_COPY
+ * RUNNING_P2P -> PRE_COPY_P2P
* STOP -> STOP_COPY
- * This arc begin the process of saving the device state and will return a
- * new data_fd.
+ * PRE_COPY, PRE_COPY_P2P and STOP_COPY form the "saving group" of states
+ * which share a data transfer session. Moving between these states alters
+ * what is streamed in session, but does not terminate or otherwise affect
+ * the associated fd.
+ *
+ * These arcs begin the process of saving the device state and will return a
+ * new data_fd. The migration driver may perform actions such as enabling
+ * dirty logging of device state when entering PRE_COPY or PER_COPY_P2P.
*
+ * Each arc does not change the device operation, the device remains
+ * RUNNING, P2P quiesced or in STOP. The STOP_COPY state is described below
+ * in PRE_COPY_P2P -> STOP_COPY.
+ *
+ * PRE_COPY -> PRE_COPY_P2P
+ * Entering PRE_COPY_P2P continues all the behaviors of PRE_COPY above.
+ * However, while in the PRE_COPY_P2P state, the device is partially running
+ * in the P2P quiescent state defined below, like RUNNING_P2P.
+ *
+ * PRE_COPY_P2P -> PRE_COPY
+ * This arc allows returning the device to a full RUNNING behavior while
+ * continuing all the behaviors of PRE_COPY.
+ *
+ * PRE_COPY_P2P -> STOP_COPY
* While in the STOP_COPY state the device has the same behavior as STOP
* with the addition that the data transfers session continues to stream the
* migration state. End of stream on the FD indicates the entire device
@@ -939,6 +980,13 @@ struct vfio_device_feature_mig_state {
* device state for this arc if required to prepare the device to receive the
* migration data.
*
+ * STOP_COPY -> PRE_COPY
+ * STOP_COPY -> PRE_COPY_P2P
+ * These arcs are not permitted and return error if requested. Future
+ * revisions of this API may define behaviors for these arcs, in this case
+ * support will be discoverable by a new flag in
+ * VFIO_DEVICE_FEATURE_MIGRATION.
+ *
* any -> ERROR
* ERROR cannot be specified as a device state, however any transition request
* can be failed with an errno return and may then move the device_state into
@@ -950,7 +998,7 @@ struct vfio_device_feature_mig_state {
* The optional peer to peer (P2P) quiescent state is intended to be a quiescent
* state for the device for the purposes of managing multiple devices within a
* user context where peer-to-peer DMA between devices may be active. The
- * RUNNING_P2P states must prevent the device from initiating
+ * RUNNING_P2P and PRE_COPY_P2P states must prevent the device from initiating
* any new P2P DMA transactions. If the device can identify P2P transactions
* then it can stop only P2P DMA, otherwise it must stop all DMA. The migration
* driver must complete any such outstanding operations prior to completing the
@@ -963,6 +1011,8 @@ struct vfio_device_feature_mig_state {
* above FSM arcs. As there are multiple paths through the FSM arcs the path
* should be selected based on the following rules:
* - Select the shortest path.
+ * - The path cannot have saving group states as interior arcs, only
+ * starting/end states.
* Refer to vfio_mig_get_next_state() for the result of the algorithm.
*
* The automatic transit through the FSM arcs that make up the combination
@@ -976,6 +1026,9 @@ struct vfio_device_feature_mig_state {
* support them. The user can discover if these states are supported by using
* VFIO_DEVICE_FEATURE_MIGRATION. By using combination transitions the user can
* avoid knowing about these optional states if the kernel driver supports them.
+ *
+ * Arcs touching PRE_COPY and PRE_COPY_P2P are removed if support for PRE_COPY
+ * is not present.
*/
enum vfio_device_mig_state {
VFIO_DEVICE_STATE_ERROR = 0,
@@ -984,8 +1037,69 @@ enum vfio_device_mig_state {
VFIO_DEVICE_STATE_STOP_COPY = 3,
VFIO_DEVICE_STATE_RESUMING = 4,
VFIO_DEVICE_STATE_RUNNING_P2P = 5,
+ VFIO_DEVICE_STATE_PRE_COPY = 6,
+ VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,
+};
+
+/**
+ * VFIO_MIG_GET_PRECOPY_INFO - _IO(VFIO_TYPE, VFIO_BASE + 21)
+ *
+ * This ioctl is used on the migration data FD in the precopy phase of the
+ * migration data transfer. It returns an estimate of the current data sizes
+ * remaining to be transferred. It allows the user to judge when it is
+ * appropriate to leave PRE_COPY for STOP_COPY.
+ *
+ * This ioctl is valid only in PRE_COPY states and kernel driver should
+ * return -EINVAL from any other migration state.
+ *
+ * The vfio_precopy_info data structure returned by this ioctl provides
+ * estimates of data available from the device during the PRE_COPY states.
+ * This estimate is split into two categories, initial_bytes and
+ * dirty_bytes.
+ *
+ * The initial_bytes field indicates the amount of initial mandatory precopy
+ * data available from the device. This field should have a non-zero initial
+ * value and decrease as migration data is read from the device.
+ * It is a must to leave PRE_COPY for STOP_COPY only after this field reach
+ * zero.
+ *
+ * The dirty_bytes field tracks device state changes relative to data
+ * previously retrieved. This field starts at zero and may increase as
+ * the internal device state is modified or decrease as that modified
+ * state is read from the device.
+ *
+ * Userspace may use the combination of these fields to estimate the
+ * potential data size available during the PRE_COPY phases, as well as
+ * trends relative to the rate the device is dirtying its internal
+ * state, but these fields are not required to have any bearing relative
+ * to the data size available during the STOP_COPY phase.
+ *
+ * Drivers have a lot of flexibility in when and what they transfer during the
+ * PRE_COPY phase, and how they report this from VFIO_MIG_GET_PRECOPY_INFO.
+ *
+ * During pre-copy the migration data FD has a temporary "end of stream" that is
+ * reached when both initial_bytes and dirty_byte are zero. For instance, this
+ * may indicate that the device is idle and not currently dirtying any internal
+ * state. When read() is done on this temporary end of stream the kernel driver
+ * should return ENOMSG from read(). Userspace can wait for more data (which may
+ * never come) by using poll.
+ *
+ * Once in STOP_COPY the migration data FD has a permanent end of stream
+ * signaled in the usual way by read() always returning 0 and poll always
+ * returning readable. ENOMSG may not be returned in STOP_COPY. Support
+ * for this ioctl is optional.
+ *
+ * Return: 0 on success, -1 and errno set on failure.
+ */
+struct vfio_precopy_info {
+ __u32 argsz;
+ __u32 flags;
+ __aligned_u64 initial_bytes;
+ __aligned_u64 dirty_bytes;
};
+#define VFIO_MIG_GET_PRECOPY_INFO _IO(VFIO_TYPE, VFIO_BASE + 21)
+
/*
* Upon VFIO_DEVICE_FEATURE_SET, allow the device to be moved into a low power
* state with the platform-based power management. Device use of lower power