[v3,7/9] mfd: intel-m10-bmc: Add PMCI driver

Message ID	20221202100841.4741-8-ilpo.jarvinen@linux.intel.com (mailing list archive)
State	New
Headers	show Return-Path: <linux-fpga-owner@kernel.org> From: =?utf-8?q?Ilpo_J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com> To: linux-fpga@vger.kernel.org, Xu Yilun <yilun.xu@intel.com>, Wu Hao <hao.wu@intel.com>, Tom Rix <trix@redhat.com>, Moritz Fischer <mdf@kernel.org>, Lee Jones <lee@kernel.org>, Matthew Gerlach <matthew.gerlach@linux.intel.com>, Russ Weight <russell.h.weight@intel.com>, Tianfei zhang <tianfei.zhang@intel.com>, Mark Brown <broonie@kernel.org>, Greg KH <gregkh@linuxfoundation.org>, Marco Pagani <marpagan@redhat.com>, linux-kernel@vger.kernel.org Cc: =?utf-8?q?Ilpo_J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com> Subject: [PATCH v3 7/9] mfd: intel-m10-bmc: Add PMCI driver Date: Fri, 2 Dec 2022 12:08:39 +0200 Message-Id: <20221202100841.4741-8-ilpo.jarvinen@linux.intel.com> In-Reply-To: <20221202100841.4741-1-ilpo.jarvinen@linux.intel.com> References: <20221202100841.4741-1-ilpo.jarvinen@linux.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	intel-m10-bmc: Split BMC to core and SPI parts & add PMCI+N6000 support \| expand [v3,0/9] intel-m10-bmc: Split BMC to core and SPI parts & add PMCI+N6000 support [v3,1/9] mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info [v3,2/9] mfd: intel-m10-bmc: Rename the local variables [v3,3/9] mfd: intel-m10-bmc: Split into core and spi specific parts [v3,4/9] mfd: intel-m10-bmc: Support multiple CSR register layouts [v3,5/9] fpga: intel-m10-bmc: Rework flash read/write [v3,6/9] mfd: intel-m10-bmc: Downscope SPI defines & prefix with M10BMC_SPI [v3,7/9] mfd: intel-m10-bmc: Add PMCI driver [v3,8/9] fpga: m10bmc-sec: Add support for N6000 [v3,9/9] mfd: intel-m10-bmc: Change MODULE_LICENSE() to GPL

Ilpo Järvinen Dec. 2, 2022, 10:08 a.m. UTC

Add the mfd driver for the Platform Management Component Interface
(PMCI) based interface of Intel MAX10 BMC controller.

PMCI is a software-visible interface, connected to card BMC which
provided the basic functionality of read/write BMC register. This
driver leverages the regmap APIs to support Intel specific Indirect
Register Interface for register read/write on PMCI.

Previously, intel-m10-bmc provided sysfs under
/sys/bus/spi/devices/... which is generalized in this change because
not all MAX10 BMC appear under SPI anymore.

This patch also adds support for indirect register access via a regmap
interface. The access to the register goes via a hardware
controller/bridge that handles read/write/clear commands and
acknowledgments for the commands. On Intel FPGA IPs with e.g. PMCI or
HSSI, indirect register access is a generic way to access registers.

Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 .../ABI/testing/sysfs-driver-intel-m10-bmc    |   8 +-
 drivers/mfd/Kconfig                           |  12 ++
 drivers/mfd/Makefile                          |   2 +
 drivers/mfd/intel-m10-bmc-pmci-indirect.c     | 133 ++++++++++++++++
 drivers/mfd/intel-m10-bmc-pmci-main.c         | 147 ++++++++++++++++++
 include/linux/mfd/intel-m10-bmc.h             |  22 +++
 6 files changed, 320 insertions(+), 4 deletions(-)
 create mode 100644 drivers/mfd/intel-m10-bmc-pmci-indirect.c
 create mode 100644 drivers/mfd/intel-m10-bmc-pmci-main.c

Xu Yilun Dec. 2, 2022, 5:12 p.m. UTC | #1

On 2022-12-02 at 12:08:39 +0200, Ilpo Järvinen wrote:
> Add the mfd driver for the Platform Management Component Interface
> (PMCI) based interface of Intel MAX10 BMC controller.
> 
> PMCI is a software-visible interface, connected to card BMC which
> provided the basic functionality of read/write BMC register. This
> driver leverages the regmap APIs to support Intel specific Indirect
> Register Interface for register read/write on PMCI.
> 
> Previously, intel-m10-bmc provided sysfs under
> /sys/bus/spi/devices/... which is generalized in this change because
> not all MAX10 BMC appear under SPI anymore.
> 
> This patch also adds support for indirect register access via a regmap
> interface. The access to the register goes via a hardware
> controller/bridge that handles read/write/clear commands and
> acknowledgments for the commands. On Intel FPGA IPs with e.g. PMCI or
> HSSI, indirect register access is a generic way to access registers.
> 
> Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
> Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
> Co-developed-by: Russ Weight <russell.h.weight@intel.com>
> Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> ---
>  .../ABI/testing/sysfs-driver-intel-m10-bmc    |   8 +-
>  drivers/mfd/Kconfig                           |  12 ++
>  drivers/mfd/Makefile                          |   2 +
>  drivers/mfd/intel-m10-bmc-pmci-indirect.c     | 133 ++++++++++++++++
>  drivers/mfd/intel-m10-bmc-pmci-main.c         | 147 ++++++++++++++++++
>  include/linux/mfd/intel-m10-bmc.h             |  22 +++
>  6 files changed, 320 insertions(+), 4 deletions(-)
>  create mode 100644 drivers/mfd/intel-m10-bmc-pmci-indirect.c
>  create mode 100644 drivers/mfd/intel-m10-bmc-pmci-main.c
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
> index 9773925138af..a8ab58035c95 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
> @@ -1,4 +1,4 @@
> -What:		/sys/bus/spi/devices/.../bmc_version
> +What:		/sys/bus/.../drivers/intel-m10-bmc/.../bmc_version
>  Date:		June 2020
>  KernelVersion:	5.10
>  Contact:	Xu Yilun <yilun.xu@intel.com>
> @@ -6,7 +6,7 @@ Description:	Read only. Returns the hardware build version of Intel
>  		MAX10 BMC chip.
>  		Format: "0x%x".
>  
> -What:		/sys/bus/spi/devices/.../bmcfw_version
> +What:		/sys/bus/.../drivers/intel-m10-bmc/.../bmcfw_version
>  Date:		June 2020
>  KernelVersion:	5.10
>  Contact:	Xu Yilun <yilun.xu@intel.com>
> @@ -14,7 +14,7 @@ Description:	Read only. Returns the firmware version of Intel MAX10
>  		BMC chip.
>  		Format: "0x%x".
>  
> -What:		/sys/bus/spi/devices/.../mac_address
> +What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_address
>  Date:		January 2021
>  KernelVersion:  5.12
>  Contact:	Russ Weight <russell.h.weight@intel.com>
> @@ -25,7 +25,7 @@ Description:	Read only. Returns the first MAC address in a block
>  		space.
>  		Format: "%02x:%02x:%02x:%02x:%02x:%02x".
>  
> -What:		/sys/bus/spi/devices/.../mac_count
> +What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_count
>  Date:		January 2021
>  KernelVersion:  5.12
>  Contact:	Russ Weight <russell.h.weight@intel.com>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index a09d4ac60dc7..82f13614d98a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2238,6 +2238,18 @@ config MFD_INTEL_M10_BMC_SPI
>            additional drivers must be enabled in order to use the functionality
>            of the device.
>  
> +config MFD_INTEL_M10_BMC_PMCI
> +	tristate "Intel MAX 10 Board Management Controller with PMCI"
> +	depends on FPGA_DFL
> +	select MFD_INTEL_M10_BMC_CORE
> +	select REGMAP
> +	help
> +	  Support for the Intel MAX 10 board management controller via PMCI.
> +
> +	  This driver provides common support for accessing the device,
> +	  additional drivers must be enabled in order to use the functionality
> +	  of the device.
> +
>  config MFD_RSMU_I2C
>  	tristate "Renesas Synchronization Management Unit with I2C"
>  	depends on I2C && OF
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 5d1f308ee2a7..603c0a8f1241 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -274,6 +274,8 @@ obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
>  
>  obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE)	+= intel-m10-bmc-core.o
>  obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI)	+= intel-m10-bmc-spi.o
> +intel-m10-bmc-pmci-objs			:= intel-m10-bmc-pmci-main.o intel-m10-bmc-pmci-indirect.o
> +obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI)	+= intel-m10-bmc-pmci.o
>  
>  obj-$(CONFIG_MFD_ATC260X)	+= atc260x-core.o
>  obj-$(CONFIG_MFD_ATC260X_I2C)	+= atc260x-i2c.o
> diff --git a/drivers/mfd/intel-m10-bmc-pmci-indirect.c b/drivers/mfd/intel-m10-bmc-pmci-indirect.c
> new file mode 100644
> index 000000000000..cf347f93c05d
> --- /dev/null
> +++ b/drivers/mfd/intel-m10-bmc-pmci-indirect.c
> @@ -0,0 +1,133 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Intel FGPA indirect register access via hardware controller/bridge.
> +//
> +// Copyright (C) 2020-2022 Intel Corporation.
> +
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#include <linux/mfd/intel-m10-bmc.h>
> +
> +#define INDIRECT_CMD_OFF	0
> +#define INDIRECT_CMD_CLR	0
> +#define INDIRECT_CMD_RD		BIT(0)
> +#define INDIRECT_CMD_WR		BIT(1)
> +#define INDIRECT_CMD_ACK	BIT(2)
> +
> +#define INDIRECT_ADDR_OFF	0x4
> +#define INDIRECT_RD_OFF		0x8
> +#define INDIRECT_WR_OFF		0xc
> +
> +#define INDIRECT_INT_US		1
> +#define INDIRECT_TIMEOUT_US	10000
> +
> +struct indirect_ctx {
> +	void __iomem *base;
> +	struct device *dev;
> +};
> +
> +static int indirect_bus_clear_cmd(struct indirect_ctx *ctx)
> +{
> +	unsigned int cmd;
> +	int ret;
> +
> +	writel(INDIRECT_CMD_CLR, ctx->base + INDIRECT_CMD_OFF);
> +
> +	ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, cmd,
> +				 cmd == INDIRECT_CMD_CLR,
> +				 INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
> +	if (ret)
> +		dev_err(ctx->dev, "timed out waiting clear cmd (residual cmd=0x%x)\n", cmd);
> +
> +	return ret;
> +}
> +
> +static int indirect_bus_reg_read(void *context, unsigned int reg,
> +				     unsigned int *val)
> +{
> +	struct indirect_ctx *ctx = context;
> +	unsigned int cmd, ack, tmpval;
> +	int ret;
> +
> +	cmd = readl(ctx->base + INDIRECT_CMD_OFF);
> +	if (cmd != INDIRECT_CMD_CLR)
> +		dev_warn(ctx->dev, "residual cmd 0x%x on read entry\n", cmd);
> +
> +	writel(reg, ctx->base + INDIRECT_ADDR_OFF);
> +	writel(INDIRECT_CMD_RD, ctx->base + INDIRECT_CMD_OFF);
> +
> +	ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, ack,
> +				 (ack & INDIRECT_CMD_ACK) == INDIRECT_CMD_ACK,
> +				 INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
> +	if (ret)
> +		dev_err(ctx->dev, "read timed out on reg 0x%x ack 0x%x\n", reg, ack);
> +	else
> +		tmpval = readl(ctx->base + INDIRECT_RD_OFF);
> +
> +	if (indirect_bus_clear_cmd(ctx)) {
> +		if (!ret)
> +			ret = -ETIMEDOUT;
> +		goto out;
> +	}
> +
> +	*val = tmpval;
> +out:
> +	return ret;
> +}
> +
> +static int indirect_bus_reg_write(void *context, unsigned int reg,
> +				      unsigned int val)
> +{
> +	struct indirect_ctx *ctx = context;
> +	unsigned int cmd, ack;
> +	int ret;
> +
> +	cmd = readl(ctx->base + INDIRECT_CMD_OFF);
> +	if (cmd != INDIRECT_CMD_CLR)
> +		dev_warn(ctx->dev, "residual cmd 0x%x on write entry\n", cmd);
> +
> +	writel(val, ctx->base + INDIRECT_WR_OFF);
> +	writel(reg, ctx->base + INDIRECT_ADDR_OFF);
> +	writel(INDIRECT_CMD_WR, ctx->base + INDIRECT_CMD_OFF);
> +
> +	ret = readl_poll_timeout(ctx->base + INDIRECT_CMD_OFF, ack,
> +				 (ack & INDIRECT_CMD_ACK) == INDIRECT_CMD_ACK,
> +				 INDIRECT_INT_US, INDIRECT_TIMEOUT_US);
> +	if (ret)
> +		dev_err(ctx->dev, "write timed out on reg 0x%x ack 0x%x\n", reg, ack);
> +
> +	if (indirect_bus_clear_cmd(ctx)) {
> +		if (!ret)
> +			ret = -ETIMEDOUT;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct regmap_bus indirect_bus = {
> +	.reg_write = indirect_bus_reg_write,
> +	.reg_read =  indirect_bus_reg_read,
> +};
> +
> +struct regmap *__devm_m10_regmap_indirect(struct device *dev,

We name the file intel-m10-bmc-pmci-xxx.c, and this function
xx_m10_regmap_xx(). But I can see the implementation is just about the indirect
bus which from your commit message could be used by various DFL features
like HSSI or PMCI. So is it better we put the implementation in
drivers/fpga and name the file dfl-indirect-regmap.c and the
initialization function dfl_indirect_regmap_init()?

> +					  void __iomem *base,
> +					  struct regmap_config *cfg,
> +					  struct lock_class_key *lock_key,
> +					  const char *lock_name)
> +{
> +	struct indirect_ctx *ctx;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return NULL;
> +
> +	ctx->base = base;
> +	ctx->dev = dev;
> +
> +	indirect_bus_clear_cmd(ctx);
> +
> +	return __devm_regmap_init(dev, &indirect_bus, ctx, cfg, lock_key, lock_name);

Sorry, I just can't remember why don't we just call devm_regmap_init() and
get rid of all lock stuff?

> +}
> diff --git a/drivers/mfd/intel-m10-bmc-pmci-main.c b/drivers/mfd/intel-m10-bmc-pmci-main.c
> new file mode 100644
> index 000000000000..11e528b2f707
> --- /dev/null
> +++ b/drivers/mfd/intel-m10-bmc-pmci-main.c
> @@ -0,0 +1,147 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MFD driver for Platform Management Component Interface (PMCI) based
> + * interface to MAX10 BMC.
> + *
> + * Copyright (C) 2020-2022 Intel Corporation.
> + *
> + */
> +
> +#include <linux/dfl.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel-m10-bmc.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#define M10BMC_PMCI_INDIRECT_BASE	0x400
> +
> +#define M10BMC_PMCI_SYS_BASE		0x0
> +#define M10BMC_PMCI_SYS_END		0xfff
> +
> +#define M10BMC_PMCI_DOORBELL		0x1c0
> +#define M10BMC_PMCI_AUTH_RESULT		0x1c4
> +
> +/* Telemetry registers */
> +#define M10BMC_PMCI_TELEM_START		0x400
> +#define M10BMC_PMCI_TELEM_END		0x78c
> +
> +#define M10BMC_PMCI_BUILD_VER		0x0
> +#define NIOS2_PMCI_FW_VERSION		0x4
> +#define M10BMC_PMCI_MAC_LOW		0x20
> +#define M10BMC_PMCI_MAC_HIGH		(M10BMC_PMCI_MAC_LOW + 4)
> +
> +/* Addresses for security related data in FLASH */
> +#define M10BMC_PMCI_BMC_REH_ADDR	0x7ffc004
> +#define M10BMC_PMCI_BMC_PROG_ADDR	0x7ffc000
> +#define M10BMC_PMCI_BMC_PROG_MAGIC	0x5746
> +
> +#define M10BMC_PMCI_SR_REH_ADDR		0x7ffd004
> +#define M10BMC_PMCI_SR_PROG_ADDR	0x7ffd000
> +#define M10BMC_PMCI_SR_PROG_MAGIC	0x5253
> +
> +#define M10BMC_PMCI_PR_REH_ADDR		0x7ffe004
> +#define M10BMC_PMCI_PR_PROG_ADDR	0x7ffe000
> +#define M10BMC_PMCI_PR_PROG_MAGIC	0x5250
> +
> +#define M10BMC_PMCI_STAGING_FLASH_COUNT	0x7ff5000

The same concern here, should all PMCI based M10 BMC have the same
register layout? I assume no. I still think the layout should be decided
by board type.

So some concern about these naming.

Thanks,
Yilun

> +
> +struct m10bmc_pmci_device {
> +	void __iomem *base;
> +	struct intel_m10bmc m10bmc;
> +};
> +
> +static const struct regmap_range m10bmc_pmci_regmap_range[] = {
> +	regmap_reg_range(M10BMC_PMCI_SYS_BASE, M10BMC_PMCI_SYS_END),
> +};
> +
> +static const struct regmap_access_table m10bmc_pmci_access_table = {
> +	.yes_ranges	= m10bmc_pmci_regmap_range,
> +	.n_yes_ranges	= ARRAY_SIZE(m10bmc_pmci_regmap_range),
> +};
> +
> +static struct regmap_config m10bmc_pmci_regmap_config = {
> +	.reg_bits = 32,
> +	.reg_stride = 4,
> +	.val_bits = 32,
> +	.wr_table = &m10bmc_pmci_access_table,
> +	.rd_table = &m10bmc_pmci_access_table,
> +	.max_register = M10BMC_PMCI_SYS_END,
> +};
> +
> +static struct mfd_cell m10bmc_pmci_n6000_bmc_subdevs[] = {
> +	{ .name = "n6000bmc-hwmon" },
> +};
> +
> +static const struct m10bmc_csr_map m10bmc_pmci_csr_map = {
> +	.base = M10BMC_PMCI_SYS_BASE,
> +	.build_version = M10BMC_PMCI_BUILD_VER,
> +	.fw_version = NIOS2_PMCI_FW_VERSION,
> +	.mac_low = M10BMC_PMCI_MAC_LOW,
> +	.mac_high = M10BMC_PMCI_MAC_HIGH,
> +	.doorbell = M10BMC_PMCI_DOORBELL,
> +	.auth_result = M10BMC_PMCI_AUTH_RESULT,
> +	.bmc_prog_addr = M10BMC_PMCI_BMC_PROG_ADDR,
> +	.bmc_reh_addr = M10BMC_PMCI_BMC_REH_ADDR,
> +	.bmc_magic = M10BMC_PMCI_BMC_PROG_MAGIC,
> +	.sr_prog_addr = M10BMC_PMCI_SR_PROG_ADDR,
> +	.sr_reh_addr = M10BMC_PMCI_SR_REH_ADDR,
> +	.sr_magic = M10BMC_PMCI_SR_PROG_MAGIC,
> +	.pr_prog_addr = M10BMC_PMCI_PR_PROG_ADDR,
> +	.pr_reh_addr = M10BMC_PMCI_PR_REH_ADDR,
> +	.pr_magic = M10BMC_PMCI_PR_PROG_MAGIC,
> +	.rsu_update_counter = M10BMC_PMCI_STAGING_FLASH_COUNT,
> +};
> +
> +static const struct intel_m10bmc_platform_info m10bmc_pmci_n6000 = {
> +	.cells = m10bmc_pmci_n6000_bmc_subdevs,
> +	.n_cells = ARRAY_SIZE(m10bmc_pmci_n6000_bmc_subdevs),
> +	.csr_map = &m10bmc_pmci_csr_map,
> +};
> +
> +static int m10bmc_pmci_probe(struct dfl_device *ddev)
> +{
> +	struct device *dev = &ddev->dev;
> +	struct m10bmc_pmci_device *pmci;
> +
> +	pmci = devm_kzalloc(dev, sizeof(*pmci), GFP_KERNEL);
> +	if (!pmci)
> +		return -ENOMEM;
> +
> +	pmci->m10bmc.dev = dev;
> +
> +	pmci->base = devm_ioremap_resource(dev, &ddev->mmio_res);
> +	if (IS_ERR(pmci->base))
> +		return PTR_ERR(pmci->base);
> +
> +	pmci->m10bmc.regmap =
> +		devm_m10_regmap_indirect(dev,
> +					 pmci->base + M10BMC_PMCI_INDIRECT_BASE,
> +					 &m10bmc_pmci_regmap_config);
> +	if (IS_ERR(pmci->m10bmc.regmap))
> +		return PTR_ERR(pmci->m10bmc.regmap);
> +
> +	return m10bmc_dev_init(&pmci->m10bmc, &m10bmc_pmci_n6000);
> +}
> +
> +#define FME_FEATURE_ID_M10BMC_PMCI	0x12
> +
> +static const struct dfl_device_id m10bmc_pmci_ids[] = {
> +	{ FME_ID, FME_FEATURE_ID_M10BMC_PMCI },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(dfl, m10bmc_pmci_ids);
> +
> +static struct dfl_driver m10bmc_pmci_driver = {
> +	.drv	= {
> +		.name       = "intel-m10-bmc",
> +		.dev_groups = m10bmc_dev_groups,
> +	},
> +	.id_table = m10bmc_pmci_ids,
> +	.probe    = m10bmc_pmci_probe,
> +};
> +
> +module_dfl_driver(m10bmc_pmci_driver);
> +
> +MODULE_DESCRIPTION("MAX10 BMC PMCI-based interface");
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> index 71ace732bb48..d0497046de5f 100644
> --- a/include/linux/mfd/intel-m10-bmc.h
> +++ b/include/linux/mfd/intel-m10-bmc.h
> @@ -161,4 +161,26 @@ static inline int m10bmc_sys_read(struct intel_m10bmc *m10bmc, unsigned int offs
>  int m10bmc_dev_init(struct intel_m10bmc *m10bmc, const struct intel_m10bmc_platform_info *info);
>  extern const struct attribute_group *m10bmc_dev_groups[];
>  
> +/*
> + * Intel FPGA indirect register access support
> + */
> +struct regmap *__devm_m10_regmap_indirect(struct device *dev,
> +					  void __iomem *base,
> +					  struct regmap_config *cfg,
> +					  struct lock_class_key *lock_key,
> +					  const char *lock_name);
> +
> +/**
> + * devm_m10_regmap_indirect - create a regmap for indirect register access
> + * @dev: device creating the regmap
> + * @base: __iomem point to base of memory with mailbox
> + * @cfg: regmap_config describing interface
> + *
> + * Return: 0 on success, negative error code otherwise.
> + */
> +#define devm_m10_regmap_indirect(dev, base, config)			\
> +	__regmap_lockdep_wrapper(__devm_m10_regmap_indirect, #config,	\
> +				 dev, base, config)
> +
> +
>  #endif /* __MFD_INTEL_M10_BMC_H */
> -- 
> 2.30.2
>

Ilpo Järvinen Dec. 5, 2022, 9:51 a.m. UTC | #2

On Sat, 3 Dec 2022, Xu Yilun wrote:

> On 2022-12-02 at 12:08:39 +0200, Ilpo Järvinen wrote:
> > Add the mfd driver for the Platform Management Component Interface
> > (PMCI) based interface of Intel MAX10 BMC controller.
> > 
> > PMCI is a software-visible interface, connected to card BMC which
> > provided the basic functionality of read/write BMC register. This
> > driver leverages the regmap APIs to support Intel specific Indirect
> > Register Interface for register read/write on PMCI.
> > 
> > Previously, intel-m10-bmc provided sysfs under
> > /sys/bus/spi/devices/... which is generalized in this change because
> > not all MAX10 BMC appear under SPI anymore.
> > 
> > This patch also adds support for indirect register access via a regmap
> > interface. The access to the register goes via a hardware
> > controller/bridge that handles read/write/clear commands and
> > acknowledgments for the commands. On Intel FPGA IPs with e.g. PMCI or
> > HSSI, indirect register access is a generic way to access registers.
> > 
> > Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
> > Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
> > Co-developed-by: Russ Weight <russell.h.weight@intel.com>
> > Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> > Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> > ---
> >  .../ABI/testing/sysfs-driver-intel-m10-bmc    |   8 +-
> >  drivers/mfd/Kconfig                           |  12 ++
> >  drivers/mfd/Makefile                          |   2 +
> >  drivers/mfd/intel-m10-bmc-pmci-indirect.c     | 133 ++++++++++++++++
> >  drivers/mfd/intel-m10-bmc-pmci-main.c         | 147 ++++++++++++++++++
> >  include/linux/mfd/intel-m10-bmc.h             |  22 +++
> >  6 files changed, 320 insertions(+), 4 deletions(-)
> >  create mode 100644 drivers/mfd/intel-m10-bmc-pmci-indirect.c
> >  create mode 100644 drivers/mfd/intel-m10-bmc-pmci-main.c
> > 
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -2238,6 +2238,18 @@ config MFD_INTEL_M10_BMC_SPI
> >            additional drivers must be enabled in order to use the functionality
> >            of the device.
> >  
> > +config MFD_INTEL_M10_BMC_PMCI
> > +	tristate "Intel MAX 10 Board Management Controller with PMCI"
> > +	depends on FPGA_DFL
> > +	select MFD_INTEL_M10_BMC_CORE
> > +	select REGMAP
> > +	help
> > +	  Support for the Intel MAX 10 board management controller via PMCI.
> > +
> > +	  This driver provides common support for accessing the device,
> > +	  additional drivers must be enabled in order to use the functionality
> > +	  of the device.
> > +
> >  config MFD_RSMU_I2C
> >  	tristate "Renesas Synchronization Management Unit with I2C"
> >  	depends on I2C && OF
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 5d1f308ee2a7..603c0a8f1241 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -274,6 +274,8 @@ obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
> >  
> >  obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE)	+= intel-m10-bmc-core.o
> >  obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI)	+= intel-m10-bmc-spi.o
> > +intel-m10-bmc-pmci-objs			:= intel-m10-bmc-pmci-main.o intel-m10-bmc-pmci-indirect.o
> > +obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI)	+= intel-m10-bmc-pmci.o
> >  
> >  obj-$(CONFIG_MFD_ATC260X)	+= atc260x-core.o
> >  obj-$(CONFIG_MFD_ATC260X_I2C)	+= atc260x-i2c.o
> > diff --git a/drivers/mfd/intel-m10-bmc-pmci-indirect.c b/drivers/mfd/intel-m10-bmc-pmci-indirect.c
> > new file mode 100644
> > index 000000000000..cf347f93c05d
> > --- /dev/null
> > +++ b/drivers/mfd/intel-m10-bmc-pmci-indirect.c
> > +
> > +struct regmap *__devm_m10_regmap_indirect(struct device *dev,
> 
> We name the file intel-m10-bmc-pmci-xxx.c, and this function
> xx_m10_regmap_xx(). But I can see the implementation is just about the indirect
> bus which from your commit message could be used by various DFL features
> like HSSI or PMCI. So is it better we put the implementation in
> drivers/fpga and name the file dfl-indirect-regmap.c and the
> initialization function dfl_indirect_regmap_init()?

I guess that would be doable unless Mark objects. My understanding was 
that he preferred to have in the driver that is currently using it.

Mark, any opinion on this?

> > +					  void __iomem *base,
> > +					  struct regmap_config *cfg,
> > +					  struct lock_class_key *lock_key,
> > +					  const char *lock_name)
> > +{
> > +	struct indirect_ctx *ctx;
> > +
> > +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> > +	if (!ctx)
> > +		return NULL;
> > +
> > +	ctx->base = base;
> > +	ctx->dev = dev;
> > +
> > +	indirect_bus_clear_cmd(ctx);
> > +
> > +	return __devm_regmap_init(dev, &indirect_bus, ctx, cfg, lock_key, lock_name);
> 
> Sorry, I just can't remember why don't we just call devm_regmap_init() and
> get rid of all lock stuff?

At this point, we're already entered into __-domain though a
__regmap_lockdep_wrapper(). If I call devm_regmap_init() here, the 
second call into the wrapper would create another key which doesn't seem 
right.

> > +#define M10BMC_PMCI_STAGING_FLASH_COUNT	0x7ff5000
> 
> The same concern here, should all PMCI based M10 BMC have the same
> register layout? I assume no. I still think the layout should be decided
> by board type.
> 
> So some concern about these naming.

Noted, lets discuss the solution in the other patch.

Mark Brown Dec. 5, 2022, 12:05 p.m. UTC | #3

On Mon, Dec 05, 2022 at 11:51:15AM +0200, Ilpo Järvinen wrote:
> On Sat, 3 Dec 2022, Xu Yilun wrote:
> > On 2022-12-02 at 12:08:39 +0200, Ilpo Järvinen wrote:

> > > +struct regmap *__devm_m10_regmap_indirect(struct device *dev,

> > We name the file intel-m10-bmc-pmci-xxx.c, and this function
> > xx_m10_regmap_xx(). But I can see the implementation is just about the indirect
> > bus which from your commit message could be used by various DFL features
> > like HSSI or PMCI. So is it better we put the implementation in
> > drivers/fpga and name the file dfl-indirect-regmap.c and the
> > initialization function dfl_indirect_regmap_init()?

> I guess that would be doable unless Mark objects. My understanding was 
> that he preferred to have in the driver that is currently using it.

> Mark, any opinion on this?

The above does not look good.  As I have said several times now drivers
implementing their own regmap operations should use the reg_read() and
reg_write() operations in regmap_config when allocating their regmap
unless they're doing something unusual.  There are a few cases where it
makes sense but nothing I've seen here makes it look like this is one of
them.  Most of the current users don't fit.

Please, just implement a normal driver using a normal regmap_config as
I've repeatedly said you should if you don't want to provide something
generic.

Xu Yilun Dec. 5, 2022, 3:08 p.m. UTC | #4

On 2022-12-05 at 12:05:14 +0000, Mark Brown wrote:
> On Mon, Dec 05, 2022 at 11:51:15AM +0200, Ilpo Järvinen wrote:
> > On Sat, 3 Dec 2022, Xu Yilun wrote:
> > > On 2022-12-02 at 12:08:39 +0200, Ilpo Järvinen wrote:
> 
> > > > +struct regmap *__devm_m10_regmap_indirect(struct device *dev,
> 
> > > We name the file intel-m10-bmc-pmci-xxx.c, and this function
> > > xx_m10_regmap_xx(). But I can see the implementation is just about the indirect
> > > bus which from your commit message could be used by various DFL features
> > > like HSSI or PMCI. So is it better we put the implementation in
> > > drivers/fpga and name the file dfl-indirect-regmap.c and the
> > > initialization function dfl_indirect_regmap_init()?
> 
> > I guess that would be doable unless Mark objects. My understanding was 
> > that he preferred to have in the driver that is currently using it.
> 
> > Mark, any opinion on this?
> 
> The above does not look good.  As I have said several times now drivers
> implementing their own regmap operations should use the reg_read() and
> reg_write() operations in regmap_config when allocating their regmap
> unless they're doing something unusual.  There are a few cases where it
> makes sense but nothing I've seen here makes it look like this is one of
> them.  Most of the current users don't fit.

It is good for now to implement the indirect access interface in
regmap_config, as intel-m10-bmc is the only one who uses it. But I'm not
sure when a second IP block(like HSSI) in intel FPGA uses it, how to
implement? A shared library?

Some background about hardware:
Several IP blocks in intel FPGA integrate the same mmio register layout
(so called indirect access interface here) as the bridge to the IP's real
registers address space. Like:

 +---------+          +---------+
 | m10 BMC |          |  HSSI   |
 +---------+          +---------+
 |indirect |          |indirect |
 | access  |          | access  |
 |  MMIOs  |          |  MMIOs  |
 +----+----+          +----+----+
      |                    |
      |                    |
 +----+-----+         +---------+
 |m10 bmc   |         | HSSI    |
 |registers |         |registers|
 +----------+         +---------+

Thanks,
Yilun

> 
> Please, just implement a normal driver using a normal regmap_config as
> I've repeatedly said you should if you don't want to provide something
> generic.

Xu Yilun Dec. 5, 2022, 4:28 p.m. UTC | #5

On 2022-12-05 at 11:51:15 +0200, Ilpo Järvinen wrote:
> On Sat, 3 Dec 2022, Xu Yilun wrote:
> 
> > On 2022-12-02 at 12:08:39 +0200, Ilpo Järvinen wrote:
> > > +					  void __iomem *base,
> > > +					  struct regmap_config *cfg,
> > > +					  struct lock_class_key *lock_key,
> > > +					  const char *lock_name)
> > > +{
> > > +	struct indirect_ctx *ctx;
> > > +
> > > +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> > > +	if (!ctx)
> > > +		return NULL;
> > > +
> > > +	ctx->base = base;
> > > +	ctx->dev = dev;
> > > +
> > > +	indirect_bus_clear_cmd(ctx);
> > > +
> > > +	return __devm_regmap_init(dev, &indirect_bus, ctx, cfg, lock_key, lock_name);
> > 
> > Sorry, I just can't remember why don't we just call devm_regmap_init() and
> > get rid of all lock stuff?
> 
> At this point, we're already entered into __-domain though a
> __regmap_lockdep_wrapper(). If I call devm_regmap_init() here, the 
> second call into the wrapper would create another key which doesn't seem 
> right.

I mean could we not define new regmap_init_xxx & __regmap_init_xxx
APIs? Just call devm_regmap_init() when we have prepared the context,
devm_regmap_init() will take care of the lock stuff.

Thanks,
Yilun

Mark Brown Dec. 5, 2022, 6:22 p.m. UTC | #6

On Mon, Dec 05, 2022 at 11:08:24PM +0800, Xu Yilun wrote:

> It is good for now to implement the indirect access interface in
> regmap_config, as intel-m10-bmc is the only one who uses it. But I'm not
> sure when a second IP block(like HSSI) in intel FPGA uses it, how to
> implement? A shared library?

The short answer is that I'm not really clear what this looks like so
it's hard to say.

Usually things for anything generic end up in drivers/base/regmap but it
should be generic in some way and thus far the code that's been posted
has been very much looking specific to a single device even where it's
been named as something generic.  I've not been able to extract a clear
picture of what the hardware that's being described is and the code has
looked like it's more some vaugely related designs than anything really
shared, it's really felt like people just want to just merge whatever
they have in which case just putting it in the driver is the most
expedient thing.

Clearly the concept of a register map accessed via indirection is a
generic thing but to implement that at the very least the underlying
register map should be another regmap rather than hard coded to MMIO.

> Some background about hardware:
> Several IP blocks in intel FPGA integrate the same mmio register layout
> (so called indirect access interface here) as the bridge to the IP's real
> registers address space. Like:

>  +---------+          +---------+
>  | m10 BMC |          |  HSSI   |
>  +---------+          +---------+
>  |indirect |          |indirect |
>  | access  |          | access  |
>  |  MMIOs  |          |  MMIOs  |
>  +----+----+          +----+----+
>       |                    |
>       |                    |
>  +----+-----+         +---------+
>  |m10 bmc   |         | HSSI    |
>  |registers |         |registers|
>  +----------+         +---------+

One of the things I've been unable to tell thus far is if this is a
single device with a consistent IP for register access (thus far I've
only seen clear evidence of one device) or if there's multiple devices
that have been designed this way for some unclear reason.  AIUI these
are IPs within a single FPGA which is the top level MFD here?  If this
is one FPGA then perhaps the top level driver for the FPGA ought to just
handle whatever weirdness the FPGA has?  The fact that there doesn't
seem to be a name for this stuff makes it seem device specific.

The code that I've seen posted has looked like the register layout isn't
shared, all the register offsets have been variable, but there's this
thing with there being what looks like a command queue/IO completion
thing which seemed to be the only kind of substantial thing being
shared.

Xu Yilun Dec. 6, 2022, 2:37 a.m. UTC | #7

On 2022-12-05 at 18:22:14 +0000, Mark Brown wrote:
> On Mon, Dec 05, 2022 at 11:08:24PM +0800, Xu Yilun wrote:
> 
> > It is good for now to implement the indirect access interface in
> > regmap_config, as intel-m10-bmc is the only one who uses it. But I'm not
> > sure when a second IP block(like HSSI) in intel FPGA uses it, how to
> > implement? A shared library?
> 
> The short answer is that I'm not really clear what this looks like so
> it's hard to say.
> 
> Usually things for anything generic end up in drivers/base/regmap but it
> should be generic in some way and thus far the code that's been posted
> has been very much looking specific to a single device even where it's
> been named as something generic.  I've not been able to extract a clear
> picture of what the hardware that's being described is and the code has

I'm trying to describe it later in this thread.

> looked like it's more some vaugely related designs than anything really
> shared, it's really felt like people just want to just merge whatever
> they have in which case just putting it in the driver is the most
> expedient thing.

I agree.

> 
> Clearly the concept of a register map accessed via indirection is a
> generic thing but to implement that at the very least the underlying
> register map should be another regmap rather than hard coded to MMIO.
> 
> > Some background about hardware:
> > Several IP blocks in intel FPGA integrate the same mmio register layout
> > (so called indirect access interface here) as the bridge to the IP's real
> > registers address space. Like:
> 
> >  +---------+          +---------+
> >  | m10 BMC |          |  HSSI   |
> >  +---------+          +---------+
> >  |indirect |          |indirect |
> >  | access  |          | access  |
> >  |  MMIOs  |          |  MMIOs  |
> >  +----+----+          +----+----+
> >       |                    |
> >       |                    |
> >  +----+-----+         +---------+
> >  |m10 bmc   |         | HSSI    |
> >  |registers |         |registers|
> >  +----------+         +---------+
> 
> One of the things I've been unable to tell thus far is if this is a
> single device with a consistent IP for register access (thus far I've
> only seen clear evidence of one device) or if there's multiple devices
> that have been designed this way for some unclear reason.  AIUI these

Multiple devices, or a series of similar Intel PCIe based FPGA card.

> are IPs within a single FPGA which is the top level MFD here?  If this

Yes, the Intel FPGA PCI device acts similarly as top level MFD, but it has
its own enumeration mechanism for these IPs, called Device Feature
list(DFL).

 +--------------------------------------------------------------------+
 |        Intel PCIe based FPGA device                                |
 |                                                                    |
 |    +---------+--next--->+---------+---next--->+--------+---> [...] |
 |    | node for|          | node for|           |node for|           |
 |    | m10 BMC |          |  HSSI   |           | Another|           |
 |    +---------+          +---------+           | IP     |           |
 |    |indirect |          |indirect |           +--------+           |
 |    | access  |          | access  |           |specific|           |
 |    |  MMIOs  |          |  MMIOs  |           | MMIOs  |           |
 |    +----+----+          +----+----+           +--------+           |
 |         |                    |                                     |
 |         |                    |                                     |
 |    +----+-----+         +---------+                                |
 |    |m10 bmc   |         | HSSI    |                                |
 |    |registers |         |registers|                                |
 |    +----------+         +---------+                                |
 +--------------------------------------------------------------------+

> is one FPGA then perhaps the top level driver for the FPGA ought to just
> handle whatever weirdness the FPGA has?  The fact that there doesn't

I think this could be a choice. A helper in top level driver that deal
with the creation of the regmap for sub device drivers.

> seem to be a name for this stuff makes it seem device specific.
> 
> The code that I've seen posted has looked like the register layout isn't
> shared, all the register offsets have been variable, but there's this
> thing with there being what looks like a command queue/IO completion
> thing which seemed to be the only kind of substantial thing being
> shared.

Yes, the indirect access register block are embedded in each IP's
MMIO space, its base or offset is specific to each IP. But within
each copy of the indirect access register block, the layout is the
same.

And thanks for your detailed explaination.
Yilun

[v3,7/9] mfd: intel-m10-bmc: Add PMCI driver

Commit Message

Comments

Patch