Message ID | 20221216070632.11444-3-yanhong.wang@starfivetech.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add Ethernet driver for StarFive JH7110 SoC | expand |
Context | Check | Description |
---|---|---|
conchuod/tree_selection | fail | Guessing tree name failed |
On 16/12/2022 08:06, Yanhong Wang wrote: > Some boards(such as StarFive VisionFive v2) require more than one value > which defined by resets property, so the original definition can not > meet the requirements. In order to adapt to different requirements, > adjust the maxitems number from 1 to 3.. > > Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> > --- > .../devicetree/bindings/net/snps,dwmac.yaml | 15 +++++++++++---- > 1 file changed, 11 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > index e26c3e76ebb7..7870228b4cd3 100644 > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > @@ -133,12 +133,19 @@ properties: > - ptp_ref > > resets: > - maxItems: 1 > - description: > - MAC Reset signal. > + minItems: 1 > + maxItems: 3 > + additionalItems: true > + items: > + - description: MAC Reset signal > > reset-names: > - const: stmmaceth > + minItems: 1 > + maxItems: 3 > + additionalItems: true > + contains: > + enum: > + - stmmaceth No, this is highly unspecific and you know affect all the schemas using snps,dwmac.yaml. Both lists must be specific - for your device and for others. Best regards, Krzysztof
On 2022/12/16 19:03, Krzysztof Kozlowski wrote: > On 16/12/2022 08:06, Yanhong Wang wrote: >> Some boards(such as StarFive VisionFive v2) require more than one value >> which defined by resets property, so the original definition can not >> meet the requirements. In order to adapt to different requirements, >> adjust the maxitems number from 1 to 3.. >> >> Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> >> --- >> .../devicetree/bindings/net/snps,dwmac.yaml | 15 +++++++++++---- >> 1 file changed, 11 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >> index e26c3e76ebb7..7870228b4cd3 100644 >> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml >> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >> @@ -133,12 +133,19 @@ properties: >> - ptp_ref >> >> resets: >> - maxItems: 1 >> - description: >> - MAC Reset signal. >> + minItems: 1 >> + maxItems: 3 >> + additionalItems: true >> + items: >> + - description: MAC Reset signal >> >> reset-names: >> - const: stmmaceth >> + minItems: 1 >> + maxItems: 3 >> + additionalItems: true >> + contains: >> + enum: >> + - stmmaceth > > No, this is highly unspecific and you know affect all the schemas using > snps,dwmac.yaml. Both lists must be specific - for your device and for > others. > I have tried to define the resets in "starfive,jh71x0-dwmac.yaml", but it can not over-write the maxItems limit in "snps,dwmac.yaml",therefore, it will report error "reset-names: ['stmmaceth', 'ahb'] is too long" running "make dt_binding_check". Do you have any suggestions to deal with this situation? > Best regards, > Krzysztof >
On 20/12/2022 07:48, yanhong wang wrote: >>> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>> index e26c3e76ebb7..7870228b4cd3 100644 >>> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>> @@ -133,12 +133,19 @@ properties: >>> - ptp_ref >>> >>> resets: >>> - maxItems: 1 >>> - description: >>> - MAC Reset signal. >>> + minItems: 1 >>> + maxItems: 3 >>> + additionalItems: true >>> + items: >>> + - description: MAC Reset signal >>> >>> reset-names: >>> - const: stmmaceth >>> + minItems: 1 >>> + maxItems: 3 >>> + additionalItems: true >>> + contains: >>> + enum: >>> + - stmmaceth >> >> No, this is highly unspecific and you know affect all the schemas using >> snps,dwmac.yaml. Both lists must be specific - for your device and for >> others. >> > > I have tried to define the resets in "starfive,jh71x0-dwmac.yaml", but it can not over-write the maxItems limit in "snps,dwmac.yaml",therefore, it will report error "reset-names: ['stmmaceth', 'ahb'] is too long" running "make dt_binding_check". Do you have any suggestions to deal with this situation? The solution is not to affect all schemas with allowing anything as reset. If you need more items for your case, you can change snps,dwmac.yaml and add constraints in allOf:if:then: allowing it only for your compatible. There are plenty of examples how this is done, e.g.: https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L57 > >> Best regards, >> Krzysztof >> Best regards, Krzysztof
On 2022/12/20 17:21, Krzysztof Kozlowski wrote: > On 20/12/2022 07:48, yanhong wang wrote: > >>>> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>>> index e26c3e76ebb7..7870228b4cd3 100644 >>>> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>>> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>>> @@ -133,12 +133,19 @@ properties: >>>> - ptp_ref >>>> >>>> resets: >>>> - maxItems: 1 >>>> - description: >>>> - MAC Reset signal. >>>> + minItems: 1 >>>> + maxItems: 3 >>>> + additionalItems: true >>>> + items: >>>> + - description: MAC Reset signal >>>> >>>> reset-names: >>>> - const: stmmaceth >>>> + minItems: 1 >>>> + maxItems: 3 >>>> + additionalItems: true >>>> + contains: >>>> + enum: >>>> + - stmmaceth >>> >>> No, this is highly unspecific and you know affect all the schemas using >>> snps,dwmac.yaml. Both lists must be specific - for your device and for >>> others. >>> >> >> I have tried to define the resets in "starfive,jh71x0-dwmac.yaml", but it can not over-write the maxItems limit in "snps,dwmac.yaml",therefore, it will report error "reset-names: ['stmmaceth', 'ahb'] is too long" running "make dt_binding_check". Do you have any suggestions to deal with this situation? > > The solution is not to affect all schemas with allowing anything as reset. > > If you need more items for your case, you can change snps,dwmac.yaml and > add constraints in allOf:if:then: allowing it only for your compatible. > There are plenty of examples how this is done, e.g.: > > https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L57 > Thanks. Refer to the definition in the example and update the definition as follows: snps,dwmac.yaml[Partial Content]: properties: resets: maxItems: 1 description: MAC Reset signal. reset-names: const: stmmaceth allOf: - if: properties: compatible: contains: const: starfive,jh7110-dwmac then: properties: resets: minItems: 2 maxItems: 2 reset-names: items: - const: stmmaceth - const: ahb required: - resets - reset-names starfive,jh7110-dwmac.yaml[Partial Content]: properties: resets: items: - description: MAC Reset signal. - description: AHB Reset signal. reset-names: items: - const: stmmaceth - const: ahb allOf: - $ref: snps,dwmac.yaml# It will also report error "reset-names: ['stmmaceth', 'ahb'] is too long" running "make dt_binding_check" with 'starfive,jh7110-dwmac.yaml'. Do you have any better suggestions to solve this problem? >> >>> Best regards, >>> Krzysztof >>> > > Best regards, > Krzysztof >
On 27/12/2022 08:48, yanhong wang wrote: > > > On 2022/12/20 17:21, Krzysztof Kozlowski wrote: >> On 20/12/2022 07:48, yanhong wang wrote: >> >>>>> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>>>> index e26c3e76ebb7..7870228b4cd3 100644 >>>>> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>>>> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>>>> @@ -133,12 +133,19 @@ properties: >>>>> - ptp_ref >>>>> >>>>> resets: >>>>> - maxItems: 1 >>>>> - description: >>>>> - MAC Reset signal. >>>>> + minItems: 1 >>>>> + maxItems: 3 >>>>> + additionalItems: true >>>>> + items: >>>>> + - description: MAC Reset signal >>>>> >>>>> reset-names: >>>>> - const: stmmaceth >>>>> + minItems: 1 >>>>> + maxItems: 3 >>>>> + additionalItems: true >>>>> + contains: >>>>> + enum: >>>>> + - stmmaceth >>>> >>>> No, this is highly unspecific and you know affect all the schemas using >>>> snps,dwmac.yaml. Both lists must be specific - for your device and for >>>> others. >>>> >>> >>> I have tried to define the resets in "starfive,jh71x0-dwmac.yaml", but it can not over-write the maxItems limit in "snps,dwmac.yaml",therefore, it will report error "reset-names: ['stmmaceth', 'ahb'] is too long" running "make dt_binding_check". Do you have any suggestions to deal with this situation? >> >> The solution is not to affect all schemas with allowing anything as reset. >> >> If you need more items for your case, you can change snps,dwmac.yaml and >> add constraints in allOf:if:then: allowing it only for your compatible. >> There are plenty of examples how this is done, e.g.: >> >> https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L57 >> > > Thanks. Refer to the definition in the example and update the definition as follows: > > snps,dwmac.yaml[Partial Content]: > > properties: > resets: > maxItems: 1 > description: > MAC Reset signal. > > reset-names: > const: stmmaceth > > allOf: > - if: > properties: > compatible: > contains: > const: starfive,jh7110-dwmac > > then: > properties: > resets: > minItems: 2 > maxItems: 2 > reset-names: > items: > - const: stmmaceth > - const: ahb > required: > - resets > - reset-names > > > starfive,jh7110-dwmac.yaml[Partial Content]: > > properties: > resets: > items: > - description: MAC Reset signal. > - description: AHB Reset signal. > > reset-names: > items: > - const: stmmaceth > - const: ahb > > allOf: > - $ref: snps,dwmac.yaml# > > It will also report error "reset-names: ['stmmaceth', 'ahb'] is too long" running "make dt_binding_check" with 'starfive,jh7110-dwmac.yaml'. Do you have any better suggestions to solve this problem? Because it is not correct. The top-level properties must have the widest constraints which in allOf:if:then:else you are further narrowing for all of variants. ALL. https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L57 Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index e26c3e76ebb7..7870228b4cd3 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -133,12 +133,19 @@ properties: - ptp_ref resets: - maxItems: 1 - description: - MAC Reset signal. + minItems: 1 + maxItems: 3 + additionalItems: true + items: + - description: MAC Reset signal reset-names: - const: stmmaceth + minItems: 1 + maxItems: 3 + additionalItems: true + contains: + enum: + - stmmaceth power-domains: maxItems: 1
Some boards(such as StarFive VisionFive v2) require more than one value which defined by resets property, so the original definition can not meet the requirements. In order to adapt to different requirements, adjust the maxitems number from 1 to 3.. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> --- .../devicetree/bindings/net/snps,dwmac.yaml | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)