| Message ID | 20221228181624.1793433-5-matthew.gerlach@linux.intel.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Enhance definition of DFH and use enhancements for UART driver | expand |
On Wed, Dec 28, 2022 at 10:16:24AM -0800, matthew.gerlach@linux.intel.com wrote: > From: Matthew Gerlach <matthew.gerlach@linux.intel.com> > > Add a Device Feature List (DFL) bus driver for the Altera > 16550 implementation of UART. With that helper looks better, Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> > Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> > --- > v8: use dfh_get_u64_param_vals() > > v7: no change > > v6: move driver specific parameter definitions to limit scope > > v5: removed unneeded blank line > removed unneeded includes > included device.h and types.h > removed unneeded local variable > remove calls to dev_dbg > memset -> { } > remove space after period > explicitly include used headers > remove redundant Inc from Copyright > fix format specifier > > v4: use dev_err_probe() everywhere that is appropriate > clean up noise > change error messages to use the word, unsupported > tried again to sort Makefile and KConfig better > reorder probe function for easier error handling > use new dfh_find_param API > > v3: use passed in location of registers > use cleaned up functions for parsing parameters > > v2: clean up error messages > alphabetize header files > fix 'missing prototype' error by making function static > tried to sort Makefile and Kconfig better > --- > drivers/tty/serial/8250/8250_dfl.c | 150 +++++++++++++++++++++++++++++ > drivers/tty/serial/8250/Kconfig | 12 +++ > drivers/tty/serial/8250/Makefile | 1 + > 3 files changed, 163 insertions(+) > create mode 100644 drivers/tty/serial/8250/8250_dfl.c > > diff --git a/drivers/tty/serial/8250/8250_dfl.c b/drivers/tty/serial/8250/8250_dfl.c > new file mode 100644 > index 000000000000..0ee78c38a721 > --- /dev/null > +++ b/drivers/tty/serial/8250/8250_dfl.c > @@ -0,0 +1,150 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for FPGA UART > + * > + * Copyright (C) 2022 Intel Corporation. > + * > + * Authors: > + * Ananda Ravuri <ananda.ravuri@intel.com> > + * Matthew Gerlach <matthew.gerlach@linux.intel.com> > + */ > + > +#include <linux/bitfield.h> > +#include <linux/device.h> > +#include <linux/dfl.h> > +#include <linux/errno.h> > +#include <linux/ioport.h> > +#include <linux/module.h> > +#include <linux/mod_devicetable.h> > +#include <linux/types.h> > + > +#include <linux/serial.h> > +#include <linux/serial_8250.h> > + > +#define DFHv1_PARAM_ID_CLK_FRQ 0x2 > +#define DFHv1_PARAM_ID_FIFO_LEN 0x3 > + > +#define DFHv1_PARAM_ID_REG_LAYOUT 0x4 > +#define DFHv1_PARAM_REG_LAYOUT_WIDTH GENMASK_ULL(63, 32) > +#define DFHv1_PARAM_REG_LAYOUT_SHIFT GENMASK_ULL(31, 0) > + > +struct dfl_uart { > + int line; > +}; > + > +static int dfl_uart_get_params(struct dfl_device *dfl_dev, struct uart_8250_port *uart) > +{ > + struct device *dev = &dfl_dev->dev; > + u64 fifo_len, clk_freq, reg_layout; > + u32 reg_width; > + u64 *p; > + > + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_CLK_FRQ, &clk_freq, 1); > + if (IS_ERR(p)) > + return dev_err_probe(dev, PTR_ERR(p), "missing CLK_FRQ param\n"); > + > + uart->port.uartclk = clk_freq; > + > + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_FIFO_LEN, &fifo_len, 1); > + if (IS_ERR(p)) > + return dev_err_probe(dev, PTR_ERR(p), "missing FIFO_LEN param\n"); > + > + switch (fifo_len) { > + case 32: > + uart->port.type = PORT_ALTR_16550_F32; > + break; > + > + case 64: > + uart->port.type = PORT_ALTR_16550_F64; > + break; > + > + case 128: > + uart->port.type = PORT_ALTR_16550_F128; > + break; > + > + default: > + return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len); > + } > + > + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_REG_LAYOUT, ®_layout, 1); > + if (IS_ERR(p)) > + return dev_err_probe(dev, PTR_ERR(p), "missing REG_LAYOUT param\n"); > + > + uart->port.regshift = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_SHIFT, reg_layout); > + reg_width = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_WIDTH, reg_layout); > + switch (reg_width) { > + case 4: > + uart->port.iotype = UPIO_MEM32; > + break; > + > + case 2: > + uart->port.iotype = UPIO_MEM16; > + break; > + > + default: > + return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width); > + > + } > + > + return 0; > +} > + > +static int dfl_uart_probe(struct dfl_device *dfl_dev) > +{ > + struct device *dev = &dfl_dev->dev; > + struct uart_8250_port uart = { }; > + struct dfl_uart *dfluart; > + int ret; > + > + uart.port.flags = UPF_IOREMAP; > + uart.port.mapbase = dfl_dev->mmio_res.start; > + uart.port.mapsize = resource_size(&dfl_dev->mmio_res); > + > + ret = dfl_uart_get_params(dfl_dev, &uart); > + if (ret < 0) > + return dev_err_probe(dev, ret, "failed uart feature walk\n"); > + > + if (dfl_dev->num_irqs == 1) > + uart.port.irq = dfl_dev->irqs[0]; > + > + dfluart = devm_kzalloc(dev, sizeof(*dfluart), GFP_KERNEL); > + if (!dfluart) > + return -ENOMEM; > + > + dfluart->line = serial8250_register_8250_port(&uart); > + if (dfluart->line < 0) > + return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n"); > + > + dev_set_drvdata(dev, dfluart); > + > + return 0; > +} > + > +static void dfl_uart_remove(struct dfl_device *dfl_dev) > +{ > + struct dfl_uart *dfluart = dev_get_drvdata(&dfl_dev->dev); > + > + serial8250_unregister_port(dfluart->line); > +} > + > +#define FME_FEATURE_ID_UART 0x24 > + > +static const struct dfl_device_id dfl_uart_ids[] = { > + { FME_ID, FME_FEATURE_ID_UART }, > + { } > +}; > +MODULE_DEVICE_TABLE(dfl, dfl_uart_ids); > + > +static struct dfl_driver dfl_uart_driver = { > + .drv = { > + .name = "dfl-uart", > + }, > + .id_table = dfl_uart_ids, > + .probe = dfl_uart_probe, > + .remove = dfl_uart_remove, > +}; > +module_dfl_driver(dfl_uart_driver); > + > +MODULE_DESCRIPTION("DFL Intel UART driver"); > +MODULE_AUTHOR("Intel Corporation"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig > index b0f62345bc84..08af2acd4645 100644 > --- a/drivers/tty/serial/8250/Kconfig > +++ b/drivers/tty/serial/8250/Kconfig > @@ -370,6 +370,18 @@ config SERIAL_8250_FSL > erratum for Freescale 16550 UARTs in the 8250 driver. It also > enables support for ACPI enumeration. > > +config SERIAL_8250_DFL > + tristate "DFL bus driver for Altera 16550 UART" > + depends on SERIAL_8250 && FPGA_DFL > + help > + This option enables support for a Device Feature List (DFL) bus > + driver for the Altera 16650 UART. One or more Altera 16650 UARTs > + can be instantiated in a FPGA and then be discovered during > + enumeration of the DFL bus. > + > + To compile this driver as a module, chose M here: the > + module will be called 8250_dfl. > + > config SERIAL_8250_DW > tristate "Support for Synopsys DesignWare 8250 quirks" > depends on SERIAL_8250 > diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile > index 1615bfdde2a0..4e1a32812683 100644 > --- a/drivers/tty/serial/8250/Makefile > +++ b/drivers/tty/serial/8250/Makefile > @@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o > obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o > obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o > obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o > +obj-$(CONFIG_SERIAL_8250_DFL) += 8250_dfl.o > obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o > obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o > obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o > -- > 2.25.1 >
On Thu, 29 Dec 2022, Andy Shevchenko wrote: > On Wed, Dec 28, 2022 at 10:16:24AM -0800, matthew.gerlach@linux.intel.com wrote: >> From: Matthew Gerlach <matthew.gerlach@linux.intel.com> >> >> Add a Device Feature List (DFL) bus driver for the Altera >> 16550 implementation of UART. > > With that helper looks better, > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> I agree the helper function makes the code look better and is safer. Thanks for the review, Matthew Gerlach > >> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> >> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> >> --- >> v8: use dfh_get_u64_param_vals() >> >> v7: no change >> >> v6: move driver specific parameter definitions to limit scope >> >> v5: removed unneeded blank line >> removed unneeded includes >> included device.h and types.h >> removed unneeded local variable >> remove calls to dev_dbg >> memset -> { } >> remove space after period >> explicitly include used headers >> remove redundant Inc from Copyright >> fix format specifier >> >> v4: use dev_err_probe() everywhere that is appropriate >> clean up noise >> change error messages to use the word, unsupported >> tried again to sort Makefile and KConfig better >> reorder probe function for easier error handling >> use new dfh_find_param API >> >> v3: use passed in location of registers >> use cleaned up functions for parsing parameters >> >> v2: clean up error messages >> alphabetize header files >> fix 'missing prototype' error by making function static >> tried to sort Makefile and Kconfig better >> --- >> drivers/tty/serial/8250/8250_dfl.c | 150 +++++++++++++++++++++++++++++ >> drivers/tty/serial/8250/Kconfig | 12 +++ >> drivers/tty/serial/8250/Makefile | 1 + >> 3 files changed, 163 insertions(+) >> create mode 100644 drivers/tty/serial/8250/8250_dfl.c >> >> diff --git a/drivers/tty/serial/8250/8250_dfl.c b/drivers/tty/serial/8250/8250_dfl.c >> new file mode 100644 >> index 000000000000..0ee78c38a721 >> --- /dev/null >> +++ b/drivers/tty/serial/8250/8250_dfl.c >> @@ -0,0 +1,150 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Driver for FPGA UART >> + * >> + * Copyright (C) 2022 Intel Corporation. >> + * >> + * Authors: >> + * Ananda Ravuri <ananda.ravuri@intel.com> >> + * Matthew Gerlach <matthew.gerlach@linux.intel.com> >> + */ >> + >> +#include <linux/bitfield.h> >> +#include <linux/device.h> >> +#include <linux/dfl.h> >> +#include <linux/errno.h> >> +#include <linux/ioport.h> >> +#include <linux/module.h> >> +#include <linux/mod_devicetable.h> >> +#include <linux/types.h> >> + >> +#include <linux/serial.h> >> +#include <linux/serial_8250.h> >> + >> +#define DFHv1_PARAM_ID_CLK_FRQ 0x2 >> +#define DFHv1_PARAM_ID_FIFO_LEN 0x3 >> + >> +#define DFHv1_PARAM_ID_REG_LAYOUT 0x4 >> +#define DFHv1_PARAM_REG_LAYOUT_WIDTH GENMASK_ULL(63, 32) >> +#define DFHv1_PARAM_REG_LAYOUT_SHIFT GENMASK_ULL(31, 0) >> + >> +struct dfl_uart { >> + int line; >> +}; >> + >> +static int dfl_uart_get_params(struct dfl_device *dfl_dev, struct uart_8250_port *uart) >> +{ >> + struct device *dev = &dfl_dev->dev; >> + u64 fifo_len, clk_freq, reg_layout; >> + u32 reg_width; >> + u64 *p; >> + >> + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_CLK_FRQ, &clk_freq, 1); >> + if (IS_ERR(p)) >> + return dev_err_probe(dev, PTR_ERR(p), "missing CLK_FRQ param\n"); >> + >> + uart->port.uartclk = clk_freq; >> + >> + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_FIFO_LEN, &fifo_len, 1); >> + if (IS_ERR(p)) >> + return dev_err_probe(dev, PTR_ERR(p), "missing FIFO_LEN param\n"); >> + >> + switch (fifo_len) { >> + case 32: >> + uart->port.type = PORT_ALTR_16550_F32; >> + break; >> + >> + case 64: >> + uart->port.type = PORT_ALTR_16550_F64; >> + break; >> + >> + case 128: >> + uart->port.type = PORT_ALTR_16550_F128; >> + break; >> + >> + default: >> + return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len); >> + } >> + >> + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_REG_LAYOUT, ®_layout, 1); >> + if (IS_ERR(p)) >> + return dev_err_probe(dev, PTR_ERR(p), "missing REG_LAYOUT param\n"); >> + >> + uart->port.regshift = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_SHIFT, reg_layout); >> + reg_width = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_WIDTH, reg_layout); >> + switch (reg_width) { >> + case 4: >> + uart->port.iotype = UPIO_MEM32; >> + break; >> + >> + case 2: >> + uart->port.iotype = UPIO_MEM16; >> + break; >> + >> + default: >> + return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width); >> + >> + } >> + >> + return 0; >> +} >> + >> +static int dfl_uart_probe(struct dfl_device *dfl_dev) >> +{ >> + struct device *dev = &dfl_dev->dev; >> + struct uart_8250_port uart = { }; >> + struct dfl_uart *dfluart; >> + int ret; >> + >> + uart.port.flags = UPF_IOREMAP; >> + uart.port.mapbase = dfl_dev->mmio_res.start; >> + uart.port.mapsize = resource_size(&dfl_dev->mmio_res); >> + >> + ret = dfl_uart_get_params(dfl_dev, &uart); >> + if (ret < 0) >> + return dev_err_probe(dev, ret, "failed uart feature walk\n"); >> + >> + if (dfl_dev->num_irqs == 1) >> + uart.port.irq = dfl_dev->irqs[0]; >> + >> + dfluart = devm_kzalloc(dev, sizeof(*dfluart), GFP_KERNEL); >> + if (!dfluart) >> + return -ENOMEM; >> + >> + dfluart->line = serial8250_register_8250_port(&uart); >> + if (dfluart->line < 0) >> + return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n"); >> + >> + dev_set_drvdata(dev, dfluart); >> + >> + return 0; >> +} >> + >> +static void dfl_uart_remove(struct dfl_device *dfl_dev) >> +{ >> + struct dfl_uart *dfluart = dev_get_drvdata(&dfl_dev->dev); >> + >> + serial8250_unregister_port(dfluart->line); >> +} >> + >> +#define FME_FEATURE_ID_UART 0x24 >> + >> +static const struct dfl_device_id dfl_uart_ids[] = { >> + { FME_ID, FME_FEATURE_ID_UART }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(dfl, dfl_uart_ids); >> + >> +static struct dfl_driver dfl_uart_driver = { >> + .drv = { >> + .name = "dfl-uart", >> + }, >> + .id_table = dfl_uart_ids, >> + .probe = dfl_uart_probe, >> + .remove = dfl_uart_remove, >> +}; >> +module_dfl_driver(dfl_uart_driver); >> + >> +MODULE_DESCRIPTION("DFL Intel UART driver"); >> +MODULE_AUTHOR("Intel Corporation"); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig >> index b0f62345bc84..08af2acd4645 100644 >> --- a/drivers/tty/serial/8250/Kconfig >> +++ b/drivers/tty/serial/8250/Kconfig >> @@ -370,6 +370,18 @@ config SERIAL_8250_FSL >> erratum for Freescale 16550 UARTs in the 8250 driver. It also >> enables support for ACPI enumeration. >> >> +config SERIAL_8250_DFL >> + tristate "DFL bus driver for Altera 16550 UART" >> + depends on SERIAL_8250 && FPGA_DFL >> + help >> + This option enables support for a Device Feature List (DFL) bus >> + driver for the Altera 16650 UART. One or more Altera 16650 UARTs >> + can be instantiated in a FPGA and then be discovered during >> + enumeration of the DFL bus. >> + >> + To compile this driver as a module, chose M here: the >> + module will be called 8250_dfl. >> + >> config SERIAL_8250_DW >> tristate "Support for Synopsys DesignWare 8250 quirks" >> depends on SERIAL_8250 >> diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile >> index 1615bfdde2a0..4e1a32812683 100644 >> --- a/drivers/tty/serial/8250/Makefile >> +++ b/drivers/tty/serial/8250/Makefile >> @@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o >> obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o >> obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o >> obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o >> +obj-$(CONFIG_SERIAL_8250_DFL) += 8250_dfl.o >> obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o >> obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o >> obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o >> -- >> 2.25.1 >> > > -- > With Best Regards, > Andy Shevchenko > > >
diff --git a/drivers/tty/serial/8250/8250_dfl.c b/drivers/tty/serial/8250/8250_dfl.c new file mode 100644 index 000000000000..0ee78c38a721 --- /dev/null +++ b/drivers/tty/serial/8250/8250_dfl.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for FPGA UART + * + * Copyright (C) 2022 Intel Corporation. + * + * Authors: + * Ananda Ravuri <ananda.ravuri@intel.com> + * Matthew Gerlach <matthew.gerlach@linux.intel.com> + */ + +#include <linux/bitfield.h> +#include <linux/device.h> +#include <linux/dfl.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/types.h> + +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#define DFHv1_PARAM_ID_CLK_FRQ 0x2 +#define DFHv1_PARAM_ID_FIFO_LEN 0x3 + +#define DFHv1_PARAM_ID_REG_LAYOUT 0x4 +#define DFHv1_PARAM_REG_LAYOUT_WIDTH GENMASK_ULL(63, 32) +#define DFHv1_PARAM_REG_LAYOUT_SHIFT GENMASK_ULL(31, 0) + +struct dfl_uart { + int line; +}; + +static int dfl_uart_get_params(struct dfl_device *dfl_dev, struct uart_8250_port *uart) +{ + struct device *dev = &dfl_dev->dev; + u64 fifo_len, clk_freq, reg_layout; + u32 reg_width; + u64 *p; + + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_CLK_FRQ, &clk_freq, 1); + if (IS_ERR(p)) + return dev_err_probe(dev, PTR_ERR(p), "missing CLK_FRQ param\n"); + + uart->port.uartclk = clk_freq; + + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_FIFO_LEN, &fifo_len, 1); + if (IS_ERR(p)) + return dev_err_probe(dev, PTR_ERR(p), "missing FIFO_LEN param\n"); + + switch (fifo_len) { + case 32: + uart->port.type = PORT_ALTR_16550_F32; + break; + + case 64: + uart->port.type = PORT_ALTR_16550_F64; + break; + + case 128: + uart->port.type = PORT_ALTR_16550_F128; + break; + + default: + return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len); + } + + p = dfh_get_u64_param_vals(dfl_dev, DFHv1_PARAM_ID_REG_LAYOUT, ®_layout, 1); + if (IS_ERR(p)) + return dev_err_probe(dev, PTR_ERR(p), "missing REG_LAYOUT param\n"); + + uart->port.regshift = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_SHIFT, reg_layout); + reg_width = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_WIDTH, reg_layout); + switch (reg_width) { + case 4: + uart->port.iotype = UPIO_MEM32; + break; + + case 2: + uart->port.iotype = UPIO_MEM16; + break; + + default: + return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width); + + } + + return 0; +} + +static int dfl_uart_probe(struct dfl_device *dfl_dev) +{ + struct device *dev = &dfl_dev->dev; + struct uart_8250_port uart = { }; + struct dfl_uart *dfluart; + int ret; + + uart.port.flags = UPF_IOREMAP; + uart.port.mapbase = dfl_dev->mmio_res.start; + uart.port.mapsize = resource_size(&dfl_dev->mmio_res); + + ret = dfl_uart_get_params(dfl_dev, &uart); + if (ret < 0) + return dev_err_probe(dev, ret, "failed uart feature walk\n"); + + if (dfl_dev->num_irqs == 1) + uart.port.irq = dfl_dev->irqs[0]; + + dfluart = devm_kzalloc(dev, sizeof(*dfluart), GFP_KERNEL); + if (!dfluart) + return -ENOMEM; + + dfluart->line = serial8250_register_8250_port(&uart); + if (dfluart->line < 0) + return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n"); + + dev_set_drvdata(dev, dfluart); + + return 0; +} + +static void dfl_uart_remove(struct dfl_device *dfl_dev) +{ + struct dfl_uart *dfluart = dev_get_drvdata(&dfl_dev->dev); + + serial8250_unregister_port(dfluart->line); +} + +#define FME_FEATURE_ID_UART 0x24 + +static const struct dfl_device_id dfl_uart_ids[] = { + { FME_ID, FME_FEATURE_ID_UART }, + { } +}; +MODULE_DEVICE_TABLE(dfl, dfl_uart_ids); + +static struct dfl_driver dfl_uart_driver = { + .drv = { + .name = "dfl-uart", + }, + .id_table = dfl_uart_ids, + .probe = dfl_uart_probe, + .remove = dfl_uart_remove, +}; +module_dfl_driver(dfl_uart_driver); + +MODULE_DESCRIPTION("DFL Intel UART driver"); +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index b0f62345bc84..08af2acd4645 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -370,6 +370,18 @@ config SERIAL_8250_FSL erratum for Freescale 16550 UARTs in the 8250 driver. It also enables support for ACPI enumeration. +config SERIAL_8250_DFL + tristate "DFL bus driver for Altera 16550 UART" + depends on SERIAL_8250 && FPGA_DFL + help + This option enables support for a Device Feature List (DFL) bus + driver for the Altera 16650 UART. One or more Altera 16650 UARTs + can be instantiated in a FPGA and then be discovered during + enumeration of the DFL bus. + + To compile this driver as a module, chose M here: the + module will be called 8250_dfl. + config SERIAL_8250_DW tristate "Support for Synopsys DesignWare 8250 quirks" depends on SERIAL_8250 diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 1615bfdde2a0..4e1a32812683 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o +obj-$(CONFIG_SERIAL_8250_DFL) += 8250_dfl.o obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o