| Message ID | 3755a821121c472c9a9fd26a735c87ebb79484a5.1669999298.git.geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Fix pca954x i2c-mux node names | expand |
On Fri, Dec 02, 2022 at 05:49:22PM +0100, Geert Uytterhoeven wrote: > "make dtbs_check": > > arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux' > From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml > arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected) > From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml > ... > > Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus > multiplexer/switch DT bindings and the Generic Names Recommendation in > the Devicetree Specification. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 5a8d85a7d1612d44..bbdf989058ff7795 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -110,7 +110,7 @@ &esdhc1 { &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 9b726c2a4842671a..dda27ed7aaf2b15c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -89,7 +89,7 @@ fpga: board-control@2,0 { &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index b2fcbba60d3accdf..3b0ed9305f2bd455 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -88,7 +88,7 @@ &duart1 { &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 41d8b15f25a540ba..aa52ff73ff9e0272 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -53,7 +53,7 @@ flash@2 { &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 1bfbce69cc8b77bb..ee8e932628d17f19 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 { &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts index ef6c8967533efa45..d4867d6cf47cdc79 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -245,7 +245,7 @@ rx8035: rtc@32 { &i2c3 { status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9540"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index f598669e742fc940..52c5a43b30a0fb22 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -103,7 +103,7 @@ mdio0_phy15: mdio-phy3@1f { &i2c0 { status = "okay"; - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 3d9647b3da147314..537cecb13dd08a0f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -44,7 +44,7 @@ cpld@3,0 { &i2c0 { status = "okay"; - pca9547@75 { + i2c-mux@75 { compatible = "nxp,pca9547"; reg = <0x75>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index afb455210bd07ed6..d32a52ab00a42a28 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -54,7 +54,7 @@ &esdhc1 { &i2c0 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index 74c09891600f2525..6357078185eddb44 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -214,7 +214,7 @@ &i2c3 { pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - i2cmux@70 { + i2c-mux@70 { compatible = "nxp,pca9540"; reg = <0x70>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index 9dda2a1554c32848..8614c18b5998c242 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -133,7 +133,7 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - i2cmux@70 { + i2c-mux@70 { compatible = "nxp,pca9546"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_pca9546>; @@ -216,7 +216,7 @@ &i2c4 { pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - pca9546: i2cmux@70 { + pca9546: i2c-mux@70 { compatible = "nxp,pca9546"; reg = <0x70>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 07d8dd8160f68169..afa883389456ce77 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -61,7 +61,7 @@ &i2c1 { pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9646", "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>;
"make dtbs_check": arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected) From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +- arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 4 ++-- arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 2 +- 12 files changed, 13 insertions(+), 13 deletions(-)