diff mbox series

[v4,08/11] arm64: dts: qcom: sm8350: Use 2 interconnect cells

Message ID 20221230153554.105856-9-robert.foss@linaro.org (mailing list archive)
State New, archived
Headers show
Series Enable Display for SM8350 | expand

Commit Message

Robert Foss Dec. 30, 2022, 3:35 p.m. UTC
Use two interconnect cells in order to optionally
support a path tag.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

Comments

Krzysztof Kozlowski Dec. 30, 2022, 4:12 p.m. UTC | #1
On 30/12/2022 16:35, Robert Foss wrote:
> Use two interconnect cells in order to optionally
> support a path tag.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
>  1 file changed, 14 insertions(+), 14 deletions(-)
> 

I think you need to rebase to include:
https://lore.kernel.org/all/167233461761.1099840.5517525898039031248.b4-ty@kernel.org/

On which tree/revision did you base this?

Best regards,
Krzysztof
Robert Foss Jan. 2, 2023, 5:10 p.m. UTC | #2
On Fri, 30 Dec 2022 at 17:12, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 30/12/2022 16:35, Robert Foss wrote:
> > Use two interconnect cells in order to optionally
> > support a path tag.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
> >  1 file changed, 14 insertions(+), 14 deletions(-)
> >
>
> I think you need to rebase to include:
> https://lore.kernel.org/all/167233461761.1099840.5517525898039031248.b4-ty@kernel.org/

Ah, I see. Functionally I seemed to do fine without those commits.

>
> On which tree/revision did you base this?

msm/drm-msm-display-for-6.2

>
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Jan. 3, 2023, 7:59 a.m. UTC | #3
On 02/01/2023 18:10, Robert Foss wrote:
> On Fri, 30 Dec 2022 at 17:12, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 30/12/2022 16:35, Robert Foss wrote:
>>> Use two interconnect cells in order to optionally
>>> support a path tag.
>>>
>>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>> ---
>>>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
>>>  1 file changed, 14 insertions(+), 14 deletions(-)
>>>
>>
>> I think you need to rebase to include:
>> https://lore.kernel.org/all/167233461761.1099840.5517525898039031248.b4-ty@kernel.org/
> 
> Ah, I see. Functionally I seemed to do fine without those commits.
> 
>>
>> On which tree/revision did you base this?
> 
> msm/drm-msm-display-for-6.2

Then it is not a proper base for DTS changes - you will miss quite some
commits. The DTS patches should be based on Bjorn's SoC tree or
linux-next (although the latter sometimes can lead to conflicts).


Best regards,
Krzysztof
Robert Foss Jan. 3, 2023, 9:24 a.m. UTC | #4
On Tue, 3 Jan 2023 at 08:59, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 02/01/2023 18:10, Robert Foss wrote:
> > On Fri, 30 Dec 2022 at 17:12, Krzysztof Kozlowski
> > <krzysztof.kozlowski@linaro.org> wrote:
> >>
> >> On 30/12/2022 16:35, Robert Foss wrote:
> >>> Use two interconnect cells in order to optionally
> >>> support a path tag.
> >>>
> >>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> >>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> >>> ---
> >>>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
> >>>  1 file changed, 14 insertions(+), 14 deletions(-)
> >>>
> >>
> >> I think you need to rebase to include:
> >> https://lore.kernel.org/all/167233461761.1099840.5517525898039031248.b4-ty@kernel.org/
> >
> > Ah, I see. Functionally I seemed to do fine without those commits.
> >
> >>
> >> On which tree/revision did you base this?
> >
> > msm/drm-msm-display-for-6.2
>
> Then it is not a proper base for DTS changes - you will miss quite some
> commits. The DTS patches should be based on Bjorn's SoC tree or
> linux-next (although the latter sometimes can lead to conflicts).

Alright, then in that case this series needs to be split into 3 parts.

The dts fixes, remaining dts changes & the remainder of code.

Is this what you'd like to see?

>
>
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Jan. 3, 2023, 9:26 a.m. UTC | #5
On 03/01/2023 10:24, Robert Foss wrote:
>>>> On which tree/revision did you base this?
>>>
>>> msm/drm-msm-display-for-6.2
>>
>> Then it is not a proper base for DTS changes - you will miss quite some
>> commits. The DTS patches should be based on Bjorn's SoC tree or
>> linux-next (although the latter sometimes can lead to conflicts).
> 
> Alright, then in that case this series needs to be split into 3 parts.
> 
> The dts fixes, remaining dts changes & the remainder of code.

The split of any fixes (or unrelated cleanups) is good idea anyway.
However code can go with DTS - just base on linux-next. If you do not
want to base on linux-next then splitting code from DTS is indeed one
more good way to send it.

> 
> Is this what you'd like to see?

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 770ea105a565..bdefbbb2e38f 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1543,56 +1543,56 @@  apps_smmu: iommu@15000000 {
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm8350-config-noc";
 			reg = <0 0x01500000 0 0xa580>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mc_virt: interconnect@1580000 {
 			compatible = "qcom,sm8350-mc-virt";
 			reg = <0 0x01580000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1680000 {
 			compatible = "qcom,sm8350-system-noc";
 			reg = <0 0x01680000 0 0x1c200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sm8350-aggre1-noc";
 			reg = <0 0x016e0000 0 0x1f180>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
 			compatible = "qcom,sm8350-aggre2-noc";
 			reg = <0 0x01700000 0 0x33000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sm8350-mmss-noc";
 			reg = <0 0x01740000 0 0x1f080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		lpass_ag_noc: interconnect@3c40000 {
 			compatible = "qcom,sm8350-lpass-ag-noc";
 			reg = <0 0x03c40000 0 0xf080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		compute_noc: interconnect@a0c0000{
 			compatible = "qcom,sm8350-compute-noc";
 			reg = <0 0x0a0c0000 0 0xa180>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -1620,8 +1620,8 @@  ipa: ipa@1e40000 {
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
 			interconnect-names = "memory",
 					     "config";
 
@@ -1661,7 +1661,7 @@  mpss: remoteproc@4080000 {
 					<&rpmhpd SM8350_MSS>;
 			power-domain-names = "cx", "mss";
 
-			interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
 
 			memory-region = <&pil_modem_mem>;
 
@@ -2238,7 +2238,7 @@  cdsp: remoteproc@98900000 {
 					<&rpmhpd SM8350_MXC>;
 			power-domain-names = "cx", "mxc";
 
-			interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
 
 			memory-region = <&pil_cdsp_mem>;
 
@@ -2420,14 +2420,14 @@  usb_2_ssphy: phy@88ebe00 {
 		dc_noc: interconnect@90c0000 {
 			compatible = "qcom,sm8350-dc-noc";
 			reg = <0 0x090c0000 0 0x4200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		gem_noc: interconnect@9100000 {
 			compatible = "qcom,sm8350-gem-noc";
 			reg = <0 0x09100000 0 0xb4000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};