| Message ID | 20221228100321.15949-11-linux.amoon@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Used onboard HUB to reset and add power to hub | expand |
Hi Andand, On Wed, Dec 28, 2022 at 10:03:19AM +0000, Anand Moon wrote: > VIA LAB VL817Q7 is a 4-port USB 3.1 hub that has a reset pin to > toggle and a 5.0V core supply exported though an integrated LDO is > available for powering it. > > Add the support for this hub, for controlling the reset pin and the core > power supply. > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > --- > drivers/usb/misc/onboard_usb_hub.c | 2 ++ > drivers/usb/misc/onboard_usb_hub.h | 5 +++++ > 2 files changed, 7 insertions(+) > > diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c > index 699050eb3f17..025572019d16 100644 > --- a/drivers/usb/misc/onboard_usb_hub.c > +++ b/drivers/usb/misc/onboard_usb_hub.c > @@ -335,6 +335,7 @@ static struct platform_driver onboard_hub_driver = { > #define VENDOR_ID_MICROCHIP 0x0424 > #define VENDOR_ID_REALTEK 0x0bda > #define VENDOR_ID_TI 0x0451 > +#define VENDOR_ID_VIA 0x2109 > > /* > * Returns the onboard_hub platform device that is associated with the USB > @@ -418,6 +419,7 @@ static const struct usb_device_id onboard_hub_id_table[] = { > { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */ > { USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */ > { USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */ > + { USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817Q7 3.1 */ The VL817Q7 is a single IC, however like the TI USB8041 or the RTS5414 it provides both a USB 3.1 and a USB 2.0 hub. You should also add an entry for the USB 2.0 hub here. > {} > }; > MODULE_DEVICE_TABLE(usb, onboard_hub_id_table); > diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h > index b32fad3a70f9..1fb3371ebdae 100644 > --- a/drivers/usb/misc/onboard_usb_hub.h > +++ b/drivers/usb/misc/onboard_usb_hub.h > @@ -26,6 +26,10 @@ static const struct onboard_hub_pdata genesys_gl850g_data = { > .reset_us = 3, > }; > > +static const struct onboard_hub_pdata vialab_vl817q7_data = { > + .reset_us = 3, > +}; > + > static const struct of_device_id onboard_hub_match[] = { > { .compatible = "usb424,2514", .data = µchip_usb424_data, }, > { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, > @@ -37,6 +41,7 @@ static const struct of_device_id onboard_hub_match[] = { > { .compatible = "usbbda,5411", .data = &realtek_rts5411_data, }, > { .compatible = "usbbda,414", .data = &realtek_rts5411_data, }, > { .compatible = "usbbda,5414", .data = &realtek_rts5411_data, }, > + { .compatible = "vialab,usb2109", .data = &vialab_vl817q7_data, }, ditto Actually you added the device id entry for the 3.1 hub and a compatible string of the 2.0 hub (or vice versa). Above the device id is 0x0817, here it is 0x2109. Please add both USB 3.1 and 2.0 and make sure the device id and the USB version in the comment for the device id table match.
Hi Matthias, Thanks for your review comments. On Thu, 5 Jan 2023 at 01:52, Matthias Kaehlcke <mka@chromium.org> wrote: > > Hi Andand, > > On Wed, Dec 28, 2022 at 10:03:19AM +0000, Anand Moon wrote: > > VIA LAB VL817Q7 is a 4-port USB 3.1 hub that has a reset pin to > > toggle and a 5.0V core supply exported though an integrated LDO is > > available for powering it. > > > > Add the support for this hub, for controlling the reset pin and the core > > power supply. > > > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > > --- > > drivers/usb/misc/onboard_usb_hub.c | 2 ++ > > drivers/usb/misc/onboard_usb_hub.h | 5 +++++ > > 2 files changed, 7 insertions(+) > > > > diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c > > index 699050eb3f17..025572019d16 100644 > > --- a/drivers/usb/misc/onboard_usb_hub.c > > +++ b/drivers/usb/misc/onboard_usb_hub.c > > @@ -335,6 +335,7 @@ static struct platform_driver onboard_hub_driver = { > > #define VENDOR_ID_MICROCHIP 0x0424 > > #define VENDOR_ID_REALTEK 0x0bda > > #define VENDOR_ID_TI 0x0451 > > +#define VENDOR_ID_VIA 0x2109 > > > > /* > > * Returns the onboard_hub platform device that is associated with the USB > > @@ -418,6 +419,7 @@ static const struct usb_device_id onboard_hub_id_table[] = { > > { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */ > > { USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */ > > { USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */ > > + { USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817Q7 3.1 */ > > The VL817Q7 is a single IC, however like the TI USB8041 or the RTS5414 it > provides both a USB 3.1 and a USB 2.0 hub. You should also add an entry for > the USB 2.0 hub here. > Ok, > > > {} > > }; > > MODULE_DEVICE_TABLE(usb, onboard_hub_id_table); > > diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h > > index b32fad3a70f9..1fb3371ebdae 100644 > > --- a/drivers/usb/misc/onboard_usb_hub.h > > +++ b/drivers/usb/misc/onboard_usb_hub.h > > @@ -26,6 +26,10 @@ static const struct onboard_hub_pdata genesys_gl850g_data = { > > .reset_us = 3, > > }; > > > > +static const struct onboard_hub_pdata vialab_vl817q7_data = { > > + .reset_us = 3, > > +}; > > + > > static const struct of_device_id onboard_hub_match[] = { > > { .compatible = "usb424,2514", .data = µchip_usb424_data, }, > > { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, > > @@ -37,6 +41,7 @@ static const struct of_device_id onboard_hub_match[] = { > > { .compatible = "usbbda,5411", .data = &realtek_rts5411_data, }, > > { .compatible = "usbbda,414", .data = &realtek_rts5411_data, }, > > { .compatible = "usbbda,5414", .data = &realtek_rts5411_data, }, > > + { .compatible = "vialab,usb2109", .data = &vialab_vl817q7_data, }, > > ditto > > Actually you added the device id entry for the 3.1 hub and a compatible string > of the 2.0 hub (or vice versa). Above the device id is 0x0817, here it is > 0x2109. Please add both USB 3.1 and 2.0 and make sure the device id and the USB > version in the comment for the device id table match. Yes I messed up the compatible string On Odrodi C4 alarm@odroid-c4:~$ lsusb -tv /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M ID 1d6b:0003 Linux Foundation 3.0 root hub |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M ID 2109:0817 VIA Labs, Inc. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M ID 2109:2817 VIA Labs, Inc. vendor ID is 0x2109 and the device ID is 0817, So I have fixed the compatible string as below. compatible = "usb2109,2817"; /* USB 2.0 hub */ compatible = "usb2109,817"; /* USB 3.1 hub */ Thanks -Anand
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index 699050eb3f17..025572019d16 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -335,6 +335,7 @@ static struct platform_driver onboard_hub_driver = { #define VENDOR_ID_MICROCHIP 0x0424 #define VENDOR_ID_REALTEK 0x0bda #define VENDOR_ID_TI 0x0451 +#define VENDOR_ID_VIA 0x2109 /* * Returns the onboard_hub platform device that is associated with the USB @@ -418,6 +419,7 @@ static const struct usb_device_id onboard_hub_id_table[] = { { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */ { USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */ { USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */ + { USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817Q7 3.1 */ {} }; MODULE_DEVICE_TABLE(usb, onboard_hub_id_table); diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index b32fad3a70f9..1fb3371ebdae 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -26,6 +26,10 @@ static const struct onboard_hub_pdata genesys_gl850g_data = { .reset_us = 3, }; +static const struct onboard_hub_pdata vialab_vl817q7_data = { + .reset_us = 3, +}; + static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb424,2514", .data = µchip_usb424_data, }, { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, @@ -37,6 +41,7 @@ static const struct of_device_id onboard_hub_match[] = { { .compatible = "usbbda,5411", .data = &realtek_rts5411_data, }, { .compatible = "usbbda,414", .data = &realtek_rts5411_data, }, { .compatible = "usbbda,5414", .data = &realtek_rts5411_data, }, + { .compatible = "vialab,usb2109", .data = &vialab_vl817q7_data, }, {} };
VIA LAB VL817Q7 is a 4-port USB 3.1 hub that has a reset pin to toggle and a 5.0V core supply exported though an integrated LDO is available for powering it. Add the support for this hub, for controlling the reset pin and the core power supply. Signed-off-by: Anand Moon <linux.amoon@gmail.com> --- drivers/usb/misc/onboard_usb_hub.c | 2 ++ drivers/usb/misc/onboard_usb_hub.h | 5 +++++ 2 files changed, 7 insertions(+)