| Message ID | 20221230135030.17002-2-bagasdotme@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soc: qcom: dcc: Documentation improv | expand |
On 12/30/2022 7:20 PM, Bagas Sanjaya wrote: > kernel test robot reported htmldocs warnings: > > Documentation/ABI/testing/debugfs-driver-dcc:34: WARNING: Unexpected indentation. > Documentation/ABI/testing/debugfs-driver-dcc:34: WARNING: Block quote ends without a blank line; unexpected unindent. > > Fix these by fixing numbered list syntax on description of > /sys/kernel/debug/dcc/.../[list-number]/config, including adding blank line > separators as appropriate. > > Link: https://lore.kernel.org/linux-doc/202212300426.eMLsZsvA-lkp@intel.com/ > Fixes: 4cbe60cf5ad622 ("soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)") > Reported-by: kernel test robot <lkp@intel.com> > Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> > --- > Documentation/ABI/testing/debugfs-driver-dcc | 63 +++++++++++++------- > 1 file changed, 41 insertions(+), 22 deletions(-) > > diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc > index a4680950205931..a00f4502885b58 100644 > --- a/Documentation/ABI/testing/debugfs-driver-dcc > +++ b/Documentation/ABI/testing/debugfs-driver-dcc > @@ -44,35 +44,54 @@ Description: > example user can jump to list x only after list y is > configured and enabled. The format for entering all > types of instructions are explained in examples as > - follows. > - Example: > - i)Read Type Instruction > + follows: > + > + i) Read Type Instruction > + > echo R <1> <2> <3> >/sys/kernel/debug/dcc/../[list-number]/config > + > 1->Address to be considered for reading the value. > + > 2->The word count of the addresses, read n words > starting from address <1>. Each word is of 32 bits. > If not entered 1 is considered. > + > 3->Can be 'apb' or 'ahb' which indicates if it is apb or ahb > bus respectively. If not entered ahb is considered. > - ii)Write Type Instruction > - echo W <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config > - 1->Address to be considered for writing the value. > - 2->The value that needs to be written at the location. > - 3->Can be a 'apb' or 'ahb' which indicates if it is apb or ahb > - but respectively. > - iii)Read Modify Write type instruction > - echo RW <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config > - 1->The address which needs to be considered for read then write. > - 2->The value that needs to be written on the address. > - 3->The mask of the value to be written. > - iv)Loop Type Instruction > - echo L <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config > - 1->The loop count, the number of times the value of the addresses will be > - captured. > - 2->The address count, total number of addresses to be entered in this > - instruction. > - 3->The series of addresses to be entered separated by a space like <addr1> > - <addr2>... and so on. > + > + ii) Write Type Instruction > + > + echo W <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config > + > + 1->Address to be considered for writing the value. > + > + 2->The value that needs to be written at the location. > + > + 3->Can be a 'apb' or 'ahb' which indicates if it is apb or ahb > + but respectively. > + > + iii) Read Modify Write type instruction > + > + echo RW <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config > + > + 1->The address which needs to be considered for read then write. > + > + 2->The value that needs to be written on the address. > + > + 3->The mask of the value to be written. > + > + iv) Loop Type Instruction > + > + echo L <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config > + > + 1->The loop count, the number of times the value of the addresses will be > + captured. > + > + 2->The address count, total number of addresses to be entered in this > + instruction. > + > + 3->The series of addresses to be entered separated by a space like <addr1> > + <addr2>... and so on. > > What: /sys/kernel/debug/dcc/.../[list-number]/enable > Date: December 2022 Acked-by:Souradeep Chowdhury <quic_schowdhu@quicinc.com>
diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc index a4680950205931..a00f4502885b58 100644 --- a/Documentation/ABI/testing/debugfs-driver-dcc +++ b/Documentation/ABI/testing/debugfs-driver-dcc @@ -44,35 +44,54 @@ Description: example user can jump to list x only after list y is configured and enabled. The format for entering all types of instructions are explained in examples as - follows. - Example: - i)Read Type Instruction + follows: + + i) Read Type Instruction + echo R <1> <2> <3> >/sys/kernel/debug/dcc/../[list-number]/config + 1->Address to be considered for reading the value. + 2->The word count of the addresses, read n words starting from address <1>. Each word is of 32 bits. If not entered 1 is considered. + 3->Can be 'apb' or 'ahb' which indicates if it is apb or ahb bus respectively. If not entered ahb is considered. - ii)Write Type Instruction - echo W <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config - 1->Address to be considered for writing the value. - 2->The value that needs to be written at the location. - 3->Can be a 'apb' or 'ahb' which indicates if it is apb or ahb - but respectively. - iii)Read Modify Write type instruction - echo RW <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config - 1->The address which needs to be considered for read then write. - 2->The value that needs to be written on the address. - 3->The mask of the value to be written. - iv)Loop Type Instruction - echo L <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config - 1->The loop count, the number of times the value of the addresses will be - captured. - 2->The address count, total number of addresses to be entered in this - instruction. - 3->The series of addresses to be entered separated by a space like <addr1> - <addr2>... and so on. + + ii) Write Type Instruction + + echo W <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config + + 1->Address to be considered for writing the value. + + 2->The value that needs to be written at the location. + + 3->Can be a 'apb' or 'ahb' which indicates if it is apb or ahb + but respectively. + + iii) Read Modify Write type instruction + + echo RW <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config + + 1->The address which needs to be considered for read then write. + + 2->The value that needs to be written on the address. + + 3->The mask of the value to be written. + + iv) Loop Type Instruction + + echo L <1> <2> <3> > /sys/kernel/debug/dcc/../[list-number]/config + + 1->The loop count, the number of times the value of the addresses will be + captured. + + 2->The address count, total number of addresses to be entered in this + instruction. + + 3->The series of addresses to be entered separated by a space like <addr1> + <addr2>... and so on. What: /sys/kernel/debug/dcc/.../[list-number]/enable Date: December 2022
kernel test robot reported htmldocs warnings: Documentation/ABI/testing/debugfs-driver-dcc:34: WARNING: Unexpected indentation. Documentation/ABI/testing/debugfs-driver-dcc:34: WARNING: Block quote ends without a blank line; unexpected unindent. Fix these by fixing numbered list syntax on description of /sys/kernel/debug/dcc/.../[list-number]/config, including adding blank line separators as appropriate. Link: https://lore.kernel.org/linux-doc/202212300426.eMLsZsvA-lkp@intel.com/ Fixes: 4cbe60cf5ad622 ("soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> --- Documentation/ABI/testing/debugfs-driver-dcc | 63 +++++++++++++------- 1 file changed, 41 insertions(+), 22 deletions(-)