[v2,2/2] arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo

Commit Message

Andy Yan Dec. 29, 2022, 11:51 a.m. UTC

There is a AP6398s wifi/bt module on this board.
Fix the sdmmc1 dt node to make wifi work.

Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")

Signed-off-by: Andy Yan <[e-mail]>
---

Changes in v2:
- add vmmc/vqmmc supply back.

 .../boot/dts/rockchip/rk3566-box-demo.dts     | 24 +++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

Comments

Heiko Stuebner Jan. 11, 2023, 10:48 a.m. UTC | #1

On Thu, 29 Dec 2022 19:51:11 +0800, Andy Yan wrote:
> There is a AP6398s wifi/bt module on this board.
> Fix the sdmmc1 dt node to make wifi work.
> 
> Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")
> 
> 

Applied, thanks!

[2/2] arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo
      commit: 3eb403e4014e2db8b00acb147c0bf0abb2df15e2

Best regards,

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index d956496d5221..2671f207cfd1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -324,8 +324,12 @@  wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
+		wifi_host_wake_h: wifi-host-wake-l {
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		wifi_32k: wifi-32k {
-			rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
 		};
 	};
 
@@ -391,9 +395,15 @@  &sdmmc0 {
 };
 
 &sdmmc1 {
+	/* WiFi & BT combo module AMPAK AP6398S */
+	#address-cells = <1>;
+	#size-cells = <0>;
 	bus-width = <4>;
+	clock-frequency = <150000000>;
+	cap-sdio-irq;
 	cap-sd-highspeed;
-	disable-wp;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";
@@ -401,6 +411,16 @@  &sdmmc1 {
 	vmmc-supply = <&vcc_3v3>;
 	vqmmc-supply = <&vcca_1v8>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_h>;
+	};
 };
 
 &spdif {