| Message ID | 20221215170046.2010255-2-atishp@rivosinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | KVM perf support | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/tree_selection | fail | Guessing tree name failed |
On Thu, Dec 15, 2022 at 09:00:36AM -0800, Atish Patra wrote: > KVM module needs to know how many hardware counters and the counter > width that the platform supports. Otherwise, it will not be able to show > optimal value of virtual counters to the guest. The virtual hardware > counters also need to have the same width as the logical hardware > counters for simplicity. However, there shouldn't be mapping between > virtual hardware counters and logical hardware counters. As we don't > support hetergeneous harts or counters with different width as of now, > the implementation relies on the counter width of the first available > programmable counter. > > Signed-off-by: Atish Patra <atishp@rivosinc.com> > --- > drivers/perf/riscv_pmu_sbi.c | 35 +++++++++++++++++++++++++++++++++- > include/linux/perf/riscv_pmu.h | 3 +++ > 2 files changed, 37 insertions(+), 1 deletion(-) > > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c > index 3852c18..65d4aa4 100644 > --- a/drivers/perf/riscv_pmu_sbi.c > +++ b/drivers/perf/riscv_pmu_sbi.c > @@ -49,6 +49,9 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = { > static union sbi_pmu_ctr_info *pmu_ctr_list; > static unsigned int riscv_pmu_irq; > > +/* Cache the available counters in a bitmask */ > +unsigned long cmask; I presume this can be static since it's not getting added to the header. And don't we need this to be a long long for rv32? We should probably just use u64. > + > struct sbi_pmu_event_data { > union { > union { > @@ -264,6 +267,37 @@ static bool pmu_sbi_ctr_is_fw(int cidx) > return (info->type == SBI_PMU_CTR_TYPE_FW) ? true : false; > } > > +/* > + * Returns the counter width of a programmable counter and number of hardware > + * counters. As we don't support heterneous CPUs yet, it is okay to just heterogeneous > + * return the counter width of the first programmable counter. > + */ > +int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr) > +{ > + int i; > + union sbi_pmu_ctr_info *info; > + u32 hpm_width = 0, hpm_count = 0; > + > + if (!cmask) > + return -EINVAL; > + > + for_each_set_bit(i, &cmask, RISCV_MAX_COUNTERS) { > + info = &pmu_ctr_list[i]; > + if (!info) > + continue; > + if (!hpm_width && (info->csr != CSR_CYCLE) && (info->csr != CSR_INSTRET)) nit: No need for () around the != expressions > + hpm_width = info->width; > + if (info->type == SBI_PMU_CTR_TYPE_HW) > + hpm_count++; > + } > + > + *hw_ctr_width = hpm_width; > + *num_hw_ctr = hpm_count; > + > + return 0; > +} > +EXPORT_SYMBOL(riscv_pmu_get_hpm_info); EXPORT_SYMBOL_GPL ? > + > static int pmu_sbi_ctr_get_idx(struct perf_event *event) > { > struct hw_perf_event *hwc = &event->hw; > @@ -798,7 +832,6 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu) > static int pmu_sbi_device_probe(struct platform_device *pdev) > { > struct riscv_pmu *pmu = NULL; > - unsigned long cmask = 0; > int ret = -ENODEV; > int num_counters; > > diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h > index e17e86a..a1c3f77 100644 > --- a/include/linux/perf/riscv_pmu.h > +++ b/include/linux/perf/riscv_pmu.h > @@ -73,6 +73,9 @@ void riscv_pmu_legacy_skip_init(void); > static inline void riscv_pmu_legacy_skip_init(void) {}; > #endif > struct riscv_pmu *riscv_pmu_alloc(void); > +#ifdef CONFIG_RISCV_PMU_SBI > +int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr); > +#endif > > #endif /* CONFIG_RISCV_PMU */ > > -- > 2.25.1 > Thanks, drew
On Thu, Jan 12, 2023 at 2:06 AM Andrew Jones <ajones@ventanamicro.com> wrote: > > On Thu, Dec 15, 2022 at 09:00:36AM -0800, Atish Patra wrote: > > KVM module needs to know how many hardware counters and the counter > > width that the platform supports. Otherwise, it will not be able to show > > optimal value of virtual counters to the guest. The virtual hardware > > counters also need to have the same width as the logical hardware > > counters for simplicity. However, there shouldn't be mapping between > > virtual hardware counters and logical hardware counters. As we don't > > support hetergeneous harts or counters with different width as of now, > > the implementation relies on the counter width of the first available > > programmable counter. > > > > Signed-off-by: Atish Patra <atishp@rivosinc.com> > > --- > > drivers/perf/riscv_pmu_sbi.c | 35 +++++++++++++++++++++++++++++++++- > > include/linux/perf/riscv_pmu.h | 3 +++ > > 2 files changed, 37 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c > > index 3852c18..65d4aa4 100644 > > --- a/drivers/perf/riscv_pmu_sbi.c > > +++ b/drivers/perf/riscv_pmu_sbi.c > > @@ -49,6 +49,9 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = { > > static union sbi_pmu_ctr_info *pmu_ctr_list; > > static unsigned int riscv_pmu_irq; > > > > +/* Cache the available counters in a bitmask */ > > +unsigned long cmask; > > I presume this can be static since it's not getting added to the header. > And don't we need this to be a long long for rv32? We should probably > just use u64. > Yeah. u64 would be better. I will change it along with static. Thanks. > > + > > struct sbi_pmu_event_data { > > union { > > union { > > @@ -264,6 +267,37 @@ static bool pmu_sbi_ctr_is_fw(int cidx) > > return (info->type == SBI_PMU_CTR_TYPE_FW) ? true : false; > > } > > > > +/* > > + * Returns the counter width of a programmable counter and number of hardware > > + * counters. As we don't support heterneous CPUs yet, it is okay to just > > heterogeneous > Fixed. > > + * return the counter width of the first programmable counter. > > + */ > > +int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr) > > +{ > > + int i; > > + union sbi_pmu_ctr_info *info; > > + u32 hpm_width = 0, hpm_count = 0; > > + > > + if (!cmask) > > + return -EINVAL; > > + > > + for_each_set_bit(i, &cmask, RISCV_MAX_COUNTERS) { > > + info = &pmu_ctr_list[i]; > > + if (!info) > > + continue; > > + if (!hpm_width && (info->csr != CSR_CYCLE) && (info->csr != CSR_INSTRET)) > > nit: No need for () around the != expressions > Fixed. > > + hpm_width = info->width; > > + if (info->type == SBI_PMU_CTR_TYPE_HW) > > + hpm_count++; > > + } > > + > > + *hw_ctr_width = hpm_width; > > + *num_hw_ctr = hpm_count; > > + > > + return 0; > > +} > > +EXPORT_SYMBOL(riscv_pmu_get_hpm_info); > > EXPORT_SYMBOL_GPL ? > Is that mandatory ? I have seen usage of both in arch/riscv and other places though. I am also not sure if any other non-GPL module should/need access to this. > > + > > static int pmu_sbi_ctr_get_idx(struct perf_event *event) > > { > > struct hw_perf_event *hwc = &event->hw; > > @@ -798,7 +832,6 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu) > > static int pmu_sbi_device_probe(struct platform_device *pdev) > > { > > struct riscv_pmu *pmu = NULL; > > - unsigned long cmask = 0; > > int ret = -ENODEV; > > int num_counters; > > > > diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h > > index e17e86a..a1c3f77 100644 > > --- a/include/linux/perf/riscv_pmu.h > > +++ b/include/linux/perf/riscv_pmu.h > > @@ -73,6 +73,9 @@ void riscv_pmu_legacy_skip_init(void); > > static inline void riscv_pmu_legacy_skip_init(void) {}; > > #endif > > struct riscv_pmu *riscv_pmu_alloc(void); > > +#ifdef CONFIG_RISCV_PMU_SBI > > +int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr); > > +#endif > > > > #endif /* CONFIG_RISCV_PMU */ > > > > -- > > 2.25.1 > > > > Thanks, > drew
On Thu, Jan 12, 2023 at 10:18:05AM -0800, Atish Kumar Patra wrote: > On Thu, Jan 12, 2023 at 2:06 AM Andrew Jones <ajones@ventanamicro.com> wrote: > > > > On Thu, Dec 15, 2022 at 09:00:36AM -0800, Atish Patra wrote: ... > > > +EXPORT_SYMBOL(riscv_pmu_get_hpm_info); > > > > EXPORT_SYMBOL_GPL ? > > > > Is that mandatory ? I have seen usage of both in arch/riscv and other > places though. > I am also not sure if any other non-GPL module should/need access to this. TBH, I'm not sure what the best policy is, but I presumed we should use _GPL when we aren't aware of anything non-GPL and then when a day comes that something non-GPL would like this to be exported, the patch that flips it will provide the justification in its commit message. Thanks, drew
On Thu, Jan 12, 2023 at 11:22 PM Andrew Jones <ajones@ventanamicro.com> wrote: > > On Thu, Jan 12, 2023 at 10:18:05AM -0800, Atish Kumar Patra wrote: > > On Thu, Jan 12, 2023 at 2:06 AM Andrew Jones <ajones@ventanamicro.com> wrote: > > > > > > On Thu, Dec 15, 2022 at 09:00:36AM -0800, Atish Patra wrote: > ... > > > > +EXPORT_SYMBOL(riscv_pmu_get_hpm_info); > > > > > > EXPORT_SYMBOL_GPL ? > > > > > > > Is that mandatory ? I have seen usage of both in arch/riscv and other > > places though. > > I am also not sure if any other non-GPL module should/need access to this. > > TBH, I'm not sure what the best policy is, but I presumed we should use > _GPL when we aren't aware of anything non-GPL and then when a day comes > that something non-GPL would like this to be exported, the patch that > flips it will provide the justification in its commit message. > Sgtm. Changed it to EXPORT_SYMBOL_GPL for now. > Thanks, > drew
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c index 3852c18..65d4aa4 100644 --- a/drivers/perf/riscv_pmu_sbi.c +++ b/drivers/perf/riscv_pmu_sbi.c @@ -49,6 +49,9 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = { static union sbi_pmu_ctr_info *pmu_ctr_list; static unsigned int riscv_pmu_irq; +/* Cache the available counters in a bitmask */ +unsigned long cmask; + struct sbi_pmu_event_data { union { union { @@ -264,6 +267,37 @@ static bool pmu_sbi_ctr_is_fw(int cidx) return (info->type == SBI_PMU_CTR_TYPE_FW) ? true : false; } +/* + * Returns the counter width of a programmable counter and number of hardware + * counters. As we don't support heterneous CPUs yet, it is okay to just + * return the counter width of the first programmable counter. + */ +int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr) +{ + int i; + union sbi_pmu_ctr_info *info; + u32 hpm_width = 0, hpm_count = 0; + + if (!cmask) + return -EINVAL; + + for_each_set_bit(i, &cmask, RISCV_MAX_COUNTERS) { + info = &pmu_ctr_list[i]; + if (!info) + continue; + if (!hpm_width && (info->csr != CSR_CYCLE) && (info->csr != CSR_INSTRET)) + hpm_width = info->width; + if (info->type == SBI_PMU_CTR_TYPE_HW) + hpm_count++; + } + + *hw_ctr_width = hpm_width; + *num_hw_ctr = hpm_count; + + return 0; +} +EXPORT_SYMBOL(riscv_pmu_get_hpm_info); + static int pmu_sbi_ctr_get_idx(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; @@ -798,7 +832,6 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu) static int pmu_sbi_device_probe(struct platform_device *pdev) { struct riscv_pmu *pmu = NULL; - unsigned long cmask = 0; int ret = -ENODEV; int num_counters; diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h index e17e86a..a1c3f77 100644 --- a/include/linux/perf/riscv_pmu.h +++ b/include/linux/perf/riscv_pmu.h @@ -73,6 +73,9 @@ void riscv_pmu_legacy_skip_init(void); static inline void riscv_pmu_legacy_skip_init(void) {}; #endif struct riscv_pmu *riscv_pmu_alloc(void); +#ifdef CONFIG_RISCV_PMU_SBI +int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr); +#endif #endif /* CONFIG_RISCV_PMU */
KVM module needs to know how many hardware counters and the counter width that the platform supports. Otherwise, it will not be able to show optimal value of virtual counters to the guest. The virtual hardware counters also need to have the same width as the logical hardware counters for simplicity. However, there shouldn't be mapping between virtual hardware counters and logical hardware counters. As we don't support hetergeneous harts or counters with different width as of now, the implementation relies on the counter width of the first available programmable counter. Signed-off-by: Atish Patra <atishp@rivosinc.com> --- drivers/perf/riscv_pmu_sbi.c | 35 +++++++++++++++++++++++++++++++++- include/linux/perf/riscv_pmu.h | 3 +++ 2 files changed, 37 insertions(+), 1 deletion(-)