| Message ID | 20230111170033.32454-1-kvalo@kernel.org (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | [RFC] ath11k: Add multiple QCN9074 devices support | expand |
On Wed, Jan 11, 2023 at 07:00:33PM +0200, Kalle Valo wrote: > From: P Praneesh <quic_ppranees@quicinc.com> > > On platforms with two or more QCN9074 devices, the QMI service will run with > identical QRTR ids. qmi_add_lookup() is called with same qmi.service_ins_id. identical QRTR instance ID. > Because of this identical id, the QMI .new_server is received on all ath11k QMI > clients and the QMI state machine fails. > > To solve this generate a unique instance id from PCIe domain number and bus > number, write to the register ATH11K_PCIE_LOCAL_REG_PCIE_LOCAL_RSV0 before > power up. It is available for firmware when the QMI service is spawned. As not > all firmware releases support this feature add a new firmware feature flag > ATH11K_FW_FEATURE_MULTI_QRTR_ID to detect if it's supported. > > With this change, qrtr-lookup is shown in below example. > > Example: > root@OpenWrt:/# qrtr-lookup > Service Version Instance Node Port > 15 1 0 23 1 Test service > 69 1 23 23 2 ATH10k WLAN firmware service > 15 1 0 24 1 Test service > 69 1 24 24 2 ATH10k WLAN firmware service > > Here 23 and 24 on column 3 (QMI Instance ID) and column 4 (Node ID) are the > node IDs that is unique per ath11k device. > > Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1 > > Co-developed-by: Anilkumar Kolli <quic_akolli@quicinc.com> > Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com> > Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> > Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> > --- > > Kalle's comments: > > Depends on: https://patchwork.kernel.org/project/linux-wireless/list/?series=710862&order=date > > It's also possible to do a simple test by just changing the test > "test_bit(ATH11K_FW_FEATURE_MULTI_QRTR_ID, ab->fw.fw_features)" to true, no > extra patches should be needed. > > I don't have a test setup for this so compile tested only. But I assume Praneesh has tested this. > > This is alternative approach to Robert's patchset: > > https://patchwork.kernel.org/project/linux-wireless/list/?series=692423&state=*&order=date > For what devices the compatible firmware is available? Any plan to fix the devices with old firmware? > drivers/net/wireless/ath/ath11k/fw.h | 5 +++++ > drivers/net/wireless/ath/ath11k/pci.c | 31 +++++++++++++++++++++++++++ > drivers/net/wireless/ath/ath11k/pci.h | 1 + > 3 files changed, 37 insertions(+) > > diff --git a/drivers/net/wireless/ath/ath11k/fw.h b/drivers/net/wireless/ath/ath11k/fw.h > index e33b0f78b571..94f50d675f8d 100644 > --- a/drivers/net/wireless/ath/ath11k/fw.h > +++ b/drivers/net/wireless/ath/ath11k/fw.h > @@ -17,6 +17,11 @@ enum ath11k_fw_ie_type { > }; > > enum ath11k_fw_features { > + /* The firmware supports setting the QRTR id via register > + * ATH11K_PCIE_LOCAL_REG_PCIE_LOCAL_RSV0. > + */ > + ATH11K_FW_FEATURE_MULTI_QRTR_ID = 0, > + > /* keep last */ > ATH11K_FW_FEATURE_COUNT, > }; > diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c > index 776362d151cb..c42e1e8da624 100644 > --- a/drivers/net/wireless/ath/ath11k/pci.c > +++ b/drivers/net/wireless/ath/ath11k/pci.c > @@ -27,6 +27,8 @@ > #define QCN9074_DEVICE_ID 0x1104 > #define WCN6855_DEVICE_ID 0x1103 > > +#define ATH11K_PCIE_LOCAL_REG_PCIE_LOCAL_RSV0 0x1E03164 > + > static const struct pci_device_id ath11k_pci_id_table[] = { > { PCI_VDEVICE(QCOM, QCA6390_DEVICE_ID) }, > { PCI_VDEVICE(QCOM, WCN6855_DEVICE_ID) }, > @@ -367,9 +369,14 @@ static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on) > ath11k_mhi_set_mhictrl_reset(ab); > } > > +#define ATH11K_QRTR_INSTANCE_PCI_DOMAIN GENMASK(3, 0) > +#define ATH11K_QRTR_INSTANCE_PCI_BUS_NUM GENMASK(7, 4) > + > static void ath11k_pci_init_qmi_ce_config(struct ath11k_base *ab) > { > struct ath11k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg; > + struct ath11k_pci *ab_pci = ath11k_pci_priv(ab); > + struct pci_bus *bus = ab_pci->pdev->bus; > > cfg->tgt_ce = ab->hw_params.target_ce_config; > cfg->tgt_ce_len = ab->hw_params.target_ce_count; > @@ -380,6 +387,15 @@ static void ath11k_pci_init_qmi_ce_config(struct ath11k_base *ab) > > ath11k_ce_get_shadow_config(ab, &cfg->shadow_reg_v2, > &cfg->shadow_reg_v2_len); > + > + if (test_bit(ATH11K_FW_FEATURE_MULTI_QRTR_ID, ab->fw.fw_features)) { > + ab_pci->instance_id = > + FIELD_PREP(ATH11K_QRTR_INSTANCE_PCI_DOMAIN, > + pci_domain_nr(bus)) | > + FIELD_PREP(ATH11K_QRTR_INSTANCE_PCI_BUS_NUM, > + bus->number); > + ab->qmi.service_ins_id += ab_pci->instance_id; > + } > } > > static void ath11k_pci_msi_config(struct ath11k_pci *ab_pci, bool enable) > @@ -597,6 +613,18 @@ static void ath11k_pci_aspm_restore(struct ath11k_pci *ab_pci) > ab_pci->link_ctl); > } > > +static void ath11k_pci_update_qrtr_node_id(struct ath11k_base *ab) The function name says update node_id but instance_id is what getting updated. Thanks, Mani > +{ > + struct ath11k_pci *ab_pci = ath11k_pci_priv(ab); > + u32 reg; > + > + reg = ATH11K_PCIE_LOCAL_REG_PCIE_LOCAL_RSV0 & ATH11K_PCI_WINDOW_RANGE_MASK; > + ath11k_pcic_write32(ab, reg, ab_pci->instance_id); > + > + ath11k_dbg(ab, ATH11K_DBG_PCI, "pci reg 0x%x instance_id 0x%x read val 0x%x\n", > + reg, ab_pci->instance_id, ath11k_pcic_read32(ab, reg)); > +} > + > static int ath11k_pci_power_up(struct ath11k_base *ab) > { > struct ath11k_pci *ab_pci = ath11k_pci_priv(ab); > @@ -613,6 +641,9 @@ static int ath11k_pci_power_up(struct ath11k_base *ab) > > ath11k_pci_msi_enable(ab_pci); > > + if (test_bit(ATH11K_FW_FEATURE_MULTI_QRTR_ID, ab->fw.fw_features)) > + ath11k_pci_update_qrtr_node_id(ab); > + > ret = ath11k_mhi_start(ab_pci); > if (ret) { > ath11k_err(ab, "failed to start mhi: %d\n", ret); > diff --git a/drivers/net/wireless/ath/ath11k/pci.h b/drivers/net/wireless/ath/ath11k/pci.h > index e9a01f344ec6..b9d4018d53c6 100644 > --- a/drivers/net/wireless/ath/ath11k/pci.h > +++ b/drivers/net/wireless/ath/ath11k/pci.h > @@ -72,6 +72,7 @@ struct ath11k_pci { > /* enum ath11k_pci_flags */ > unsigned long flags; > u16 link_ctl; > + u32 instance_id; > }; > > static inline struct ath11k_pci *ath11k_pci_priv(struct ath11k_base *ab) > -- > 2.30.2 > >
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes: > On Wed, Jan 11, 2023 at 07:00:33PM +0200, Kalle Valo wrote: >> From: P Praneesh <quic_ppranees@quicinc.com> >> >> On platforms with two or more QCN9074 devices, the QMI service will run with >> identical QRTR ids. qmi_add_lookup() is called with same qmi.service_ins_id. > > identical QRTR instance ID. Will fix. >> Kalle's comments: >> >> Depends on: https://patchwork.kernel.org/project/linux-wireless/list/?series=710862&order=date >> >> It's also possible to do a simple test by just changing the test >> "test_bit(ATH11K_FW_FEATURE_MULTI_QRTR_ID, ab->fw.fw_features)" to true, no >> extra patches should be needed. >> >> I don't have a test setup for this so compile tested only. But I assume Praneesh has tested this. >> >> This is alternative approach to Robert's patchset: >> >> https://patchwork.kernel.org/project/linux-wireless/list/?series=692423&state=*&order=date >> > > For what devices the compatible firmware is available? Currently only recent QCN9074 firmware releases support this, but I don't from which release onwards. > Any plan to fix the devices with old firmware? In my opinion all ath11k PCI firmwares should support this, but AFAIK they do not. I'll push the firmware teams to implement this but it's another story if I succeed :) >> +static void ath11k_pci_update_qrtr_node_id(struct ath11k_base *ab) > > The function name says update node_id but instance_id is what getting > updated. Will fix. Thanks for the review!
diff --git a/drivers/net/wireless/ath/ath11k/fw.h b/drivers/net/wireless/ath/ath11k/fw.h index e33b0f78b571..94f50d675f8d 100644 --- a/drivers/net/wireless/ath/ath11k/fw.h +++ b/drivers/net/wireless/ath/ath11k/fw.h @@ -17,6 +17,11 @@ enum ath11k_fw_ie_type { }; enum ath11k_fw_features { + /* The firmware supports setting the QRTR id via register + * ATH11K_PCIE_LOCAL_REG_PCIE_LOCAL_RSV0. + */ + ATH11K_FW_FEATURE_MULTI_QRTR_ID = 0, + /* keep last */ ATH11K_FW_FEATURE_COUNT, }; diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c index 776362d151cb..c42e1e8da624 100644 --- a/drivers/net/wireless/ath/ath11k/pci.c +++ b/drivers/net/wireless/ath/ath11k/pci.c @@ -27,6 +27,8 @@ #define QCN9074_DEVICE_ID 0x1104 #define WCN6855_DEVICE_ID 0x1103 +#define ATH11K_PCIE_LOCAL_REG_PCIE_LOCAL_RSV0 0x1E03164 + static const struct pci_device_id ath11k_pci_id_table[] = { { PCI_VDEVICE(QCOM, QCA6390_DEVICE_ID) }, { PCI_VDEVICE(QCOM, WCN6855_DEVICE_ID) }, @@ -367,9 +369,14 @@ static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on) ath11k_mhi_set_mhictrl_reset(ab); } +#define ATH11K_QRTR_INSTANCE_PCI_DOMAIN GENMASK(3, 0) +#define ATH11K_QRTR_INSTANCE_PCI_BUS_NUM GENMASK(7, 4) + static void ath11k_pci_init_qmi_ce_config(struct ath11k_base *ab) { struct ath11k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg; + struct ath11k_pci *ab_pci = ath11k_pci_priv(ab); + struct pci_bus *bus = ab_pci->pdev->bus; cfg->tgt_ce = ab->hw_params.target_ce_config; cfg->tgt_ce_len = ab->hw_params.target_ce_count; @@ -380,6 +387,15 @@ static void ath11k_pci_init_qmi_ce_config(struct ath11k_base *ab) ath11k_ce_get_shadow_config(ab, &cfg->shadow_reg_v2, &cfg->shadow_reg_v2_len); + + if (test_bit(ATH11K_FW_FEATURE_MULTI_QRTR_ID, ab->fw.fw_features)) { + ab_pci->instance_id = + FIELD_PREP(ATH11K_QRTR_INSTANCE_PCI_DOMAIN, + pci_domain_nr(bus)) | + FIELD_PREP(ATH11K_QRTR_INSTANCE_PCI_BUS_NUM, + bus->number); + ab->qmi.service_ins_id += ab_pci->instance_id; + } } static void ath11k_pci_msi_config(struct ath11k_pci *ab_pci, bool enable) @@ -597,6 +613,18 @@ static void ath11k_pci_aspm_restore(struct ath11k_pci *ab_pci) ab_pci->link_ctl); } +static void ath11k_pci_update_qrtr_node_id(struct ath11k_base *ab) +{ + struct ath11k_pci *ab_pci = ath11k_pci_priv(ab); + u32 reg; + + reg = ATH11K_PCIE_LOCAL_REG_PCIE_LOCAL_RSV0 & ATH11K_PCI_WINDOW_RANGE_MASK; + ath11k_pcic_write32(ab, reg, ab_pci->instance_id); + + ath11k_dbg(ab, ATH11K_DBG_PCI, "pci reg 0x%x instance_id 0x%x read val 0x%x\n", + reg, ab_pci->instance_id, ath11k_pcic_read32(ab, reg)); +} + static int ath11k_pci_power_up(struct ath11k_base *ab) { struct ath11k_pci *ab_pci = ath11k_pci_priv(ab); @@ -613,6 +641,9 @@ static int ath11k_pci_power_up(struct ath11k_base *ab) ath11k_pci_msi_enable(ab_pci); + if (test_bit(ATH11K_FW_FEATURE_MULTI_QRTR_ID, ab->fw.fw_features)) + ath11k_pci_update_qrtr_node_id(ab); + ret = ath11k_mhi_start(ab_pci); if (ret) { ath11k_err(ab, "failed to start mhi: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath11k/pci.h b/drivers/net/wireless/ath/ath11k/pci.h index e9a01f344ec6..b9d4018d53c6 100644 --- a/drivers/net/wireless/ath/ath11k/pci.h +++ b/drivers/net/wireless/ath/ath11k/pci.h @@ -72,6 +72,7 @@ struct ath11k_pci { /* enum ath11k_pci_flags */ unsigned long flags; u16 link_ctl; + u32 instance_id; }; static inline struct ath11k_pci *ath11k_pci_priv(struct ath11k_base *ab)