@@ -142,16 +142,18 @@ static void ras_init_common(uint32_t *reg_state, uint32_t *write_msk)
* be handled as RO.
*/
reg_state[R_CXL_RAS_UNC_ERR_STATUS] = 0;
+ write_msk[R_CXL_RAS_UNC_ERR_STATUS] = 0x1cfff;
/* Bits 12-13 and 17-31 reserved in CXL 2.0 */
reg_state[R_CXL_RAS_UNC_ERR_MASK] = 0x1cfff;
write_msk[R_CXL_RAS_UNC_ERR_MASK] = 0x1cfff;
reg_state[R_CXL_RAS_UNC_ERR_SEVERITY] = 0x1cfff;
write_msk[R_CXL_RAS_UNC_ERR_SEVERITY] = 0x1cfff;
reg_state[R_CXL_RAS_COR_ERR_STATUS] = 0;
+ write_msk[R_CXL_RAS_COR_ERR_STATUS] = 0x7f;
reg_state[R_CXL_RAS_COR_ERR_MASK] = 0x7f;
write_msk[R_CXL_RAS_COR_ERR_MASK] = 0x7f;
/* CXL switches and devices must set */
- reg_state[R_CXL_RAS_ERR_CAP_CTRL] = 0x00;
+ reg_state[R_CXL_RAS_ERR_CAP_CTRL] = 0x200;
}
static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk,
@@ -1,6 +1,7 @@
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qemu/error-report.h"
+#include "qapi/qapi-commands-cxl.h"
#include "hw/mem/memory-device.h"
#include "hw/mem/pc-dimm.h"
#include "hw/pci/pci.h"
@@ -323,6 +324,66 @@ static void hdm_decoder_commit(CXLType3Dev *ct3d, int which)
ARRAY_FIELD_DP32(cache_mem, CXL_HDM_DECODER0_CTRL, COMMITTED, 1);
}
+static int ct3d_qmp_uncor_err_to_cxl(CxlUncorErrorType qmp_err)
+{
+ switch (qmp_err) {
+ case CXL_UNCOR_ERROR_TYPE_CACHE_DATA_PARITY:
+ return CXL_RAS_UNC_ERR_CACHE_DATA_PARITY;
+ case CXL_UNCOR_ERROR_TYPE_CACHE_ADDRESS_PARITY:
+ return CXL_RAS_UNC_ERR_CACHE_ADDRESS_PARITY;
+ case CXL_UNCOR_ERROR_TYPE_CACHE_BE_PARITY:
+ return CXL_RAS_UNC_ERR_CACHE_BE_PARITY;
+ case CXL_UNCOR_ERROR_TYPE_CACHE_DATA_ECC:
+ return CXL_RAS_UNC_ERR_CACHE_DATA_ECC;
+ case CXL_UNCOR_ERROR_TYPE_MEM_DATA_PARITY:
+ return CXL_RAS_UNC_ERR_MEM_DATA_PARITY;
+ case CXL_UNCOR_ERROR_TYPE_MEM_ADDRESS_PARITY:
+ return CXL_RAS_UNC_ERR_MEM_ADDRESS_PARITY;
+ case CXL_UNCOR_ERROR_TYPE_MEM_BE_PARITY:
+ return CXL_RAS_UNC_ERR_MEM_BE_PARITY;
+ case CXL_UNCOR_ERROR_TYPE_MEM_DATA_ECC:
+ return CXL_RAS_UNC_ERR_MEM_DATA_ECC;
+ case CXL_UNCOR_ERROR_TYPE_REINIT_THRESHOLD:
+ return CXL_RAS_UNC_ERR_REINIT_THRESHOLD;
+ case CXL_UNCOR_ERROR_TYPE_RSVD_ENCODING:
+ return CXL_RAS_UNC_ERR_RSVD_ENCODING;
+ case CXL_UNCOR_ERROR_TYPE_POISON_RECEIVED:
+ return CXL_RAS_UNC_ERR_POISON_RECEIVED;
+ case CXL_UNCOR_ERROR_TYPE_RECEIVER_OVERFLOW:
+ return CXL_RAS_UNC_ERR_RECEIVER_OVERFLOW;
+ case CXL_UNCOR_ERROR_TYPE_INTERNAL:
+ return CXL_RAS_UNC_ERR_INTERNAL;
+ case CXL_UNCOR_ERROR_TYPE_CXL_IDE_TX:
+ return CXL_RAS_UNC_ERR_CXL_IDE_TX;
+ case CXL_UNCOR_ERROR_TYPE_CXL_IDE_RX:
+ return CXL_RAS_UNC_ERR_CXL_IDE_RX;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ct3d_qmp_cor_err_to_cxl(CxlUncorErrorType qmp_err)
+{
+ switch (qmp_err) {
+ case CXL_COR_ERROR_TYPE_CACHE_DATA_ECC:
+ return CXL_RAS_COR_ERR_CACHE_DATA_ECC;
+ case CXL_COR_ERROR_TYPE_MEM_DATA_ECC:
+ return CXL_RAS_COR_ERR_MEM_DATA_ECC;
+ case CXL_COR_ERROR_TYPE_CRC_THRESHOLD:
+ return CXL_RAS_COR_ERR_CRC_THRESHOLD;
+ case CXL_COR_ERROR_TYPE_RETRY_THRESHOLD:
+ return CXL_RAS_COR_ERR_RETRY_THRESHOLD;
+ case CXL_COR_ERROR_TYPE_CACHE_POISON_RECEIVED:
+ return CXL_RAS_COR_ERR_CACHE_POISON_RECEIVED;
+ case CXL_COR_ERROR_TYPE_MEM_POISON_RECEIVED:
+ return CXL_RAS_COR_ERR_MEM_POISON_RECEIVED;
+ case CXL_COR_ERROR_TYPE_PHYSICAL:
+ return CXL_RAS_COR_ERR_PHYSICAL;
+ default:
+ return -EINVAL;
+ }
+}
+
static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
@@ -341,6 +402,84 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value,
should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT);
which_hdm = 0;
break;
+ case A_CXL_RAS_UNC_ERR_STATUS:
+ {
+ uint32_t capctrl = ldl_le_p(cache_mem + R_CXL_RAS_ERR_CAP_CTRL);
+ uint32_t fe = FIELD_EX32(capctrl, CXL_RAS_ERR_CAP_CTRL, FIRST_ERROR_POINTER);
+ CXLError *cxl_err;
+ uint32_t unc_err;
+
+ /*
+ * If single bit written that corresponds to the first error
+ * pointer being cleared, update the status and header log.
+ */
+ if (!QTAILQ_EMPTY(&ct3d->error_list)) {
+ CXLError *cxl_err = QTAILQ_FIRST(&ct3d->error_list);
+ uint32_t *header_log = &cache_mem[R_CXL_RAS_ERR_HEADER0];
+
+ if ((1 << fe) ^ value) {
+ CXLError *cxl_next;
+ /*
+ * Software is using wrong flow for multiple header recording
+ * Following behaviour in PCIe r6.0 and assuming multiple
+ * header support. Imdef choice to clear all matching records
+ * if more than one bit set - which corresponds closest to
+ * behavior of hardware not capable of multiple header
+ * recording.
+ */
+ QTAILQ_FOREACH_SAFE(cxl_err, &ct3d->error_list, node, cxl_next) {
+ if ((1 << cxl_err->type) & value) {
+ QTAILQ_REMOVE(&ct3d->error_list, cxl_err, node);
+ g_free(cxl_err);
+ }
+ }
+ } else {
+ /* Done with previous FE, so drop from list */
+ QTAILQ_REMOVE(&ct3d->error_list, cxl_err, node);
+ g_free(cxl_err);
+ }
+
+ /*
+ * If there is another FE, then put that in place and update
+ * the header log
+ */
+ if (!QTAILQ_EMPTY(&ct3d->error_list)) {
+ int i;
+
+ cxl_err = QTAILQ_FIRST(&ct3d->error_list);
+ for (i = 0; i < CXL_RAS_ERR_HEADER_NUM; i++) {
+ stl_le_p(header_log + i, cxl_err->header[i]);
+ }
+ capctrl = FIELD_DP32(capctrl, CXL_RAS_ERR_CAP_CTRL,
+ FIRST_ERROR_POINTER, cxl_err->type);
+ } else {
+ /*
+ * If no more errors, then follow recomendation of PCI spec
+ * r6.0 6.2.4.2 to set the first error pointer to a status
+ * bit that will never be used.
+ */
+ capctrl = FIELD_DP32(capctrl, CXL_RAS_ERR_CAP_CTRL,
+ FIRST_ERROR_POINTER,
+ CXL_RAS_UNC_ERR_CXL_UNUSED);
+ }
+ stl_le_p((uint8_t *)cache_mem + A_CXL_RAS_ERR_CAP_CTRL, capctrl);
+ }
+ unc_err = 0;
+ QTAILQ_FOREACH(cxl_err, &ct3d->error_list, node) {
+ unc_err |= 1 << cxl_err->type;
+ }
+ stl_le_p((uint8_t *)cache_mem + offset, unc_err);
+
+ return;
+ }
+ case A_CXL_RAS_COR_ERR_STATUS:
+ {
+ uint32_t rw1c = value;
+ uint32_t temp = ldl_le_p((uint8_t *)cache_mem + offset);
+ temp &= ~rw1c;
+ stl_le_p((uint8_t *)cache_mem + offset, temp);
+ return;
+ }
default:
break;
}
@@ -404,6 +543,8 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
unsigned short msix_num = 1;
int i, rc;
+ QTAILQ_INIT(&ct3d->error_list);
+
if (!cxl_setup_memory(ct3d, errp)) {
return;
}
@@ -631,6 +772,155 @@ static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size,
*/
}
+/* For uncorrectable errors include support for multiple header recording */
+void qmp_cxl_inject_uncorrectable_errors(const char *path,
+ CXLUncorErrorRecordList *errors,
+ Error **errp)
+{
+ Object *obj = object_resolve_path(path, NULL);
+ static PCIEAERErr err = {};
+ CXLType3Dev *ct3d;
+ CXLError *cxl_err;
+ uint32_t *reg_state;
+ uint32_t unc_err;
+ bool first;
+
+ if (!obj) {
+ error_setg(errp, "Unable to resolve path");
+ return;
+ }
+
+ if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) {
+ error_setg(errp, "Path does not point to a CXL type 3 device");
+ return;
+ }
+
+ err.status = PCI_ERR_UNC_INTN;
+ err.source_id = pci_requester_id(PCI_DEVICE(obj));
+ err.flags = 0;
+
+ ct3d = CXL_TYPE3(obj);
+
+ first = QTAILQ_EMPTY(&ct3d->error_list);
+ reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
+ while (errors) {
+ uint32List *header = errors->value->header;
+ uint8_t header_count = 0;
+ int cxl_err_code;
+
+ cxl_err_code = ct3d_qmp_uncor_err_to_cxl(errors->value->type);
+ if (cxl_err_code < 0) {
+ error_setg(errp, "Unknown error code");
+ return;
+ }
+
+ /* If the error is masked, nothting to do here */
+ if (!((1 << cxl_err_code) & ~reg_state[R_CXL_RAS_UNC_ERR_MASK])) {
+ errors = errors->next;
+ continue;
+ }
+
+ cxl_err = g_malloc0(sizeof(*cxl_err));
+ if (!cxl_err) {
+ return;
+ }
+
+ cxl_err->type = cxl_err_code;
+ while (header && header_count < 32) {
+ cxl_err->header[header_count++] = header->value;
+ header = header->next;
+ }
+ if (header_count > 32) {
+ error_setg(errp, "Header must be 32 DWORD or less");
+ return;
+ }
+ QTAILQ_INSERT_TAIL(&ct3d->error_list, cxl_err, node);
+
+ errors = errors->next;
+ }
+
+ if (first && !QTAILQ_EMPTY(&ct3d->error_list)) {
+ uint32_t *cache_mem = ct3d->cxl_cstate.crb.cache_mem_registers;
+ uint32_t capctrl = ldl_le_p((uint8_t *)cache_mem + A_CXL_RAS_ERR_CAP_CTRL);
+ uint32_t *header_log = &cache_mem[R_CXL_RAS_ERR_HEADER0];
+ int i;
+
+ cxl_err = QTAILQ_FIRST(&ct3d->error_list);
+ for (i = 0; i < CXL_RAS_ERR_HEADER_NUM; i++) {
+ stl_le_p(header_log + i, cxl_err->header[i]);
+ }
+
+ capctrl = FIELD_DP32(capctrl, CXL_RAS_ERR_CAP_CTRL,
+ FIRST_ERROR_POINTER, cxl_err->type);
+ stl_le_p(cache_mem + R_CXL_RAS_ERR_CAP_CTRL, capctrl);
+ }
+
+ unc_err = 0;
+ QTAILQ_FOREACH(cxl_err, &ct3d->error_list, node) {
+ unc_err |= (1 << cxl_err->type);
+ }
+ if (!unc_err) {
+ return;
+ }
+
+ reg_state[R_CXL_RAS_UNC_ERR_STATUS] = unc_err;
+ pcie_aer_inject_error(PCI_DEVICE(obj), &err);
+
+ return;
+}
+
+void qmp_cxl_inject_correctable_error(const char *path, CxlCorErrorType type,
+ uint32List *header, Error **errp)
+{
+ static PCIEAERErr err = {};
+ Object *obj = object_resolve_path(path, NULL);
+ CXLType3Dev *ct3d;
+ uint32_t *reg_state;
+ uint8_t header_count = 0;
+ uint32_t cor_err;
+ int cxl_err_type;
+
+ if (!obj) {
+ error_setg(errp, "Unable to resolve path");
+ return;
+ }
+ if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) {
+ error_setg(errp, "Path does not point to a CXL type 3 device");
+ return;
+ }
+
+ err.status = PCI_ERR_COR_INTERNAL;
+ err.source_id = pci_requester_id(PCI_DEVICE(obj));
+ err.flags = PCIE_AER_ERR_IS_CORRECTABLE;
+
+ ct3d = CXL_TYPE3(obj);
+ reg_state = ct3d->cxl_cstate.crb.cache_mem_registers;
+ cor_err = reg_state[R_CXL_RAS_COR_ERR_STATUS];
+
+ cxl_err_type = ct3d_qmp_cor_err_to_cxl(type);
+ if (cxl_err_type < 0) {
+ error_setg(errp, "Invalid COR error");
+ return;
+ }
+ /* If the error is masked, nothting to do here */
+ if (!((1 << cxl_err_type) & ~reg_state[R_CXL_RAS_COR_ERR_MASK])) {
+ return;
+ }
+
+ cor_err |= (1 << cxl_err_type);
+ reg_state[R_CXL_RAS_COR_ERR_STATUS] = cor_err;
+ while (header && header_count < 32) {
+ reg_state[R_CXL_RAS_ERR_HEADER0 + header_count++] = header->value;
+ header = header->next;
+ }
+ if (header_count > 32) {
+ error_setg(errp, "Header must be 32 DWORD or less");
+ return;
+ }
+
+ pcie_aer_inject_error(PCI_DEVICE(obj), &err);
+}
+
static void ct3_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
new file mode 100644
@@ -0,0 +1,10 @@
+
+#include "qemu/osdep.h"
+#include "qapi/qapi-commands-cxl.h"
+
+void qmp_cxl_inject_uncorrectable_errors(const char *path,
+ CXLUncorErrorRecordList *errors,
+ Error **errp) {}
+
+void qmp_cxl_inject_correctable_error(const char *path, CxlCorErrorType type,
+ uint32List *header, Error **errp) {}
@@ -4,6 +4,8 @@ mem_ss.add(when: 'CONFIG_DIMM', if_true: files('pc-dimm.c'))
mem_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_mc.c'))
mem_ss.add(when: 'CONFIG_NVDIMM', if_true: files('nvdimm.c'))
mem_ss.add(when: 'CONFIG_CXL_MEM_DEVICE', if_true: files('cxl_type3.c'))
+softmmu_ss.add(when: 'CONFIG_CXL_MEM_DEVICE', if_false: files('cxl_type3_stubs.c'))
+softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('cxl_type3_stubs.c'))
softmmu_ss.add_all(when: 'CONFIG_MEM_DEVICE', if_true: mem_ss)
@@ -67,11 +67,37 @@ CXLx_CAPABILITY_HEADER(SNOOP, 0x14)
#define CXL_RAS_REGISTERS_OFFSET 0x80
#define CXL_RAS_REGISTERS_SIZE 0x58
REG32(CXL_RAS_UNC_ERR_STATUS, CXL_RAS_REGISTERS_OFFSET)
+#define CXL_RAS_UNC_ERR_CACHE_DATA_PARITY 0
+#define CXL_RAS_UNC_ERR_CACHE_ADDRESS_PARITY 1
+#define CXL_RAS_UNC_ERR_CACHE_BE_PARITY 2
+#define CXL_RAS_UNC_ERR_CACHE_DATA_ECC 3
+#define CXL_RAS_UNC_ERR_MEM_DATA_PARITY 4
+#define CXL_RAS_UNC_ERR_MEM_ADDRESS_PARITY 5
+#define CXL_RAS_UNC_ERR_MEM_BE_PARITY 6
+#define CXL_RAS_UNC_ERR_MEM_DATA_ECC 7
+#define CXL_RAS_UNC_ERR_REINIT_THRESHOLD 8
+#define CXL_RAS_UNC_ERR_RSVD_ENCODING 9
+#define CXL_RAS_UNC_ERR_POISON_RECEIVED 10
+#define CXL_RAS_UNC_ERR_RECEIVER_OVERFLOW 11
+#define CXL_RAS_UNC_ERR_INTERNAL 14
+#define CXL_RAS_UNC_ERR_CXL_IDE_TX 15
+#define CXL_RAS_UNC_ERR_CXL_IDE_RX 16
+#define CXL_RAS_UNC_ERR_CXL_UNUSED 63 /* Magic value */
REG32(CXL_RAS_UNC_ERR_MASK, CXL_RAS_REGISTERS_OFFSET + 0x4)
REG32(CXL_RAS_UNC_ERR_SEVERITY, CXL_RAS_REGISTERS_OFFSET + 0x8)
REG32(CXL_RAS_COR_ERR_STATUS, CXL_RAS_REGISTERS_OFFSET + 0xc)
+#define CXL_RAS_COR_ERR_CACHE_DATA_ECC 0
+#define CXL_RAS_COR_ERR_MEM_DATA_ECC 1
+#define CXL_RAS_COR_ERR_CRC_THRESHOLD 2
+#define CXL_RAS_COR_ERR_RETRY_THRESHOLD 3
+#define CXL_RAS_COR_ERR_CACHE_POISON_RECEIVED 4
+#define CXL_RAS_COR_ERR_MEM_POISON_RECEIVED 5
+#define CXL_RAS_COR_ERR_PHYSICAL 6
REG32(CXL_RAS_COR_ERR_MASK, CXL_RAS_REGISTERS_OFFSET + 0x10)
REG32(CXL_RAS_ERR_CAP_CTRL, CXL_RAS_REGISTERS_OFFSET + 0x14)
+ FIELD(CXL_RAS_ERR_CAP_CTRL, FIRST_ERROR_POINTER, 0, 6)
+REG32(CXL_RAS_ERR_HEADER0, CXL_RAS_REGISTERS_OFFSET + 0x18)
+#define CXL_RAS_ERR_HEADER_NUM 32
/* Offset 0x18 - 0x58 reserved for RAS logs */
/* 8.2.5.10 - CXL Security Capability Structure */
@@ -232,6 +232,14 @@ REG64(CXL_MEM_DEV_STS, 0)
FIELD(CXL_MEM_DEV_STS, MBOX_READY, 4, 1)
FIELD(CXL_MEM_DEV_STS, RESET_NEEDED, 5, 3)
+typedef struct CXLError {
+ QTAILQ_ENTRY(CXLError) node;
+ int type; /* Error code as per FE definition */
+ uint32_t header[32];
+} CXLError;
+
+typedef QTAILQ_HEAD(, CXLError) CXLErrorList;
+
struct CXLType3Dev {
/* Private */
PCIDevice parent_obj;
@@ -248,6 +256,9 @@ struct CXLType3Dev {
/* DOE */
DOECap doe_cdat;
+
+ /* Error injection */
+ CXLErrorList error_list;
};
#define TYPE_CXL_TYPE3 "cxl-type3"
new file mode 100644
@@ -0,0 +1,113 @@
+# -*- Mode: Python -*-
+# vim: filetype=python
+
+##
+# = CXL devices
+##
+
+##
+# @CxlUncorErrorType:
+#
+# Type of CXL error to inject
+#
+# @cache-data-parity: Data error such as data parity or data ECC error CXL.cache
+# @cache-address-parity: Address parity or other errors associated with the
+# address field on CXL.cache
+# @cache-be-parity: Byte enable parity or other byte enable errors on CXL.cache
+# @cache-data-ecc: ECC error on CXL.cache
+# @mem-data-parity: Data error such as data parity or data ECC error on CXL.mem
+# @mem-address-parity: Address parity or other errors associated with the
+# address field on CXL.mem
+# @mem-be-parity: Byte enable parity or other byte enable errors on CXL.mem.
+# @mem-data-ecc: Data ECC error on CXL.mem.
+# @reinit-threshold: REINIT threshold hit.
+# @rsvd-encoding: Received unrecognized encoding.
+# @poison-received: Received poison from the peer.
+# @receiver-overflow: Buffer overflows (first 3 bits of header log indicate which)
+# @internal: Component specific error
+# @cxl-ide-tx: Integrity and data encryption tx error.
+# @cxl-ide-rx: Integrity and data encryption rx error.
+##
+
+{ 'enum': 'CxlUncorErrorType',
+ 'data': ['cache-data-parity',
+ 'cache-address-parity',
+ 'cache-be-parity',
+ 'cache-data-ecc',
+ 'mem-data-parity',
+ 'mem-address-parity',
+ 'mem-be-parity',
+ 'mem-data-ecc',
+ 'reinit-threshold',
+ 'rsvd-encoding',
+ 'poison-received',
+ 'receiver-overflow',
+ 'internal',
+ 'cxl-ide-tx',
+ 'cxl-ide-rx'
+ ]
+ }
+
+##
+# @CXLUncorErrorRecord:
+#
+# @type: Type of error
+# @header: 16 DWORD of header.
+##
+{ 'struct': 'CXLUncorErrorRecord',
+ 'data': {
+ 'type': 'CxlUncorErrorType',
+ 'header': [ 'uint32' ]
+ }
+}
+
+##
+# @cxl-inject-uncorrectable-errors:
+#
+# Inject mulitiple uncorrectable errors in one go.
+#
+# @path: CXL Type 3 device canonical QOM path
+#
+# @errors: Errors to inject
+##
+{ 'command': 'cxl-inject-uncorrectable-errors',
+ 'data': { 'path': 'str',
+ 'errors': [ 'CXLUncorErrorRecord' ] }}
+
+##
+# @CxlCorErrorType:
+#
+# Type of CXL correctable error to inject
+#
+# @cache-data-ecc: Data ECC error on CXL.cache
+# @mem-data-ecc: Data ECC error on CXL.mem
+# @crc-threshold: Component specific and applicable to 68 byte Flit mode only.
+# @cache-poison-received: Received poison from a peer on CXL.cache.
+# @mem-poison-received: Received poison from a peer on CXL.mem
+# @physical: Received error indication from the physical layer.
+##
+{ 'enum': 'CxlCorErrorType',
+ 'data': ['cache-data-ecc',
+ 'mem-data-ecc',
+ 'crc-threshold',
+ 'retry-threshold',
+ 'cache-poison-received',
+ 'mem-poison-received',
+ 'physical']
+}
+
+##
+# @cxl-inject-correctable-error:
+#
+# @path: CXL Type 3 device canonical QOM path
+#
+# @type: Type of error.
+#
+# @header : 16 DWORD of header.
+##
+{ 'command': 'cxl-inject-correctable-error',
+ 'data': { 'path': 'str',
+ 'type': 'CxlCorErrorType',
+ 'header': [ 'uint32' ]
+ }
+}
@@ -31,6 +31,7 @@ qapi_all_modules = [
'compat',
'control',
'crypto',
+ 'cxl',
'dump',
'error',
'introspect',
@@ -95,3 +95,4 @@
{ 'include': 'pci.json' }
{ 'include': 'stats.json' }
{ 'include': 'virtio.json' }
+{ 'include': 'cxl.json' }
CXL uses PCI AER Internal errors to signal to the host that an error has occurred. The host can then read more detailed status from the CXL RAS capability. For uncorrectable errors: support multiple injection in one operation as this is needed to reliably test multiple header logging support in an OS. The equivalent feature doesn't exist for correctable errors, so only one error need be injected at a time. Note: - Header content needs to be manually specified in a fashion that matches the specification for what can be in the header for each error type. Injection via QMP: { "execute": "qmp_capabilities" } ... { "execute": "cxl-inject-uncorrectable-errors", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "errors": [ { "type": "cache-address-parity", "header": [ 3, 4] }, { "type": "cache-data-parity", "header": [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31] }, { "type": "internal", "header": [ 1, 2, 4] } ] }} ... { "execute": "cxl-inject-correctable-error", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "type": "physical", "header": [ 3, 4] } } Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- hw/cxl/cxl-component-utils.c | 4 +- hw/mem/cxl_type3.c | 290 +++++++++++++++++++++++++++++++++ hw/mem/cxl_type3_stubs.c | 10 ++ hw/mem/meson.build | 2 + include/hw/cxl/cxl_component.h | 26 +++ include/hw/cxl/cxl_device.h | 11 ++ qapi/cxl.json | 113 +++++++++++++ qapi/meson.build | 1 + qapi/qapi-schema.json | 1 + 9 files changed, 457 insertions(+), 1 deletion(-)