@@ -39,6 +39,7 @@ static inline void ftrace_boot_snapshot(void) { }
struct ftrace_ops;
struct ftrace_regs;
+struct dyn_ftrace;
#ifdef CONFIG_FUNCTION_TRACER
/*
@@ -57,6 +58,9 @@ void arch_ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip);
void arch_ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct ftrace_regs *fregs);
#endif
+extern const struct ftrace_ops ftrace_nop_ops;
+extern const struct ftrace_ops ftrace_list_ops;
+struct ftrace_ops *ftrace_find_unique_ops(struct dyn_ftrace *rec);
#endif /* CONFIG_FUNCTION_TRACER */
/* Main tracing buffer and events set up */
@@ -391,8 +395,6 @@ struct ftrace_func_entry {
unsigned long direct; /* for direct lookup only */
};
-struct dyn_ftrace;
-
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
extern int ftrace_direct_func_count;
int register_ftrace_direct(unsigned long ip, unsigned long addr);
@@ -563,6 +565,8 @@ bool is_ftrace_trampoline(unsigned long addr);
* IPMODIFY - the record allows for the IP address to be changed.
* DISABLED - the record is not ready to be touched yet
* DIRECT - there is a direct function to call
+ * CALL_OPS - the record can use callsite-specific ops
+ * CALL_OPS_EN - the function is set up to use callsite-specific ops
*
* When a new ftrace_ops is registered and wants a function to save
* pt_regs, the rec->flags REGS is set. When the function has been
@@ -580,9 +584,11 @@ enum {
FTRACE_FL_DISABLED = (1UL << 25),
FTRACE_FL_DIRECT = (1UL << 24),
FTRACE_FL_DIRECT_EN = (1UL << 23),
+ FTRACE_FL_CALL_OPS = (1UL << 22),
+ FTRACE_FL_CALL_OPS_EN = (1UL << 21),
};
-#define FTRACE_REF_MAX_SHIFT 23
+#define FTRACE_REF_MAX_SHIFT 21
#define FTRACE_REF_MAX ((1UL << FTRACE_REF_MAX_SHIFT) - 1)
#define ftrace_rec_count(rec) ((rec)->flags & FTRACE_REF_MAX)
@@ -820,7 +826,8 @@ static inline int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
*/
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#if defined(CONFIG_DYNAMIC_FTRACE_WITH_REGS) || \
+ defined(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)
/**
* ftrace_modify_call - convert from one addr to another (no nop)
* @rec: the call site record (e.g. mcount/fentry)
@@ -833,6 +840,9 @@ extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
* what we expect it to be, and then on success of the compare,
* it should write to the location.
*
+ * When using call ops, this is called when the associated ops change, even
+ * when (addr == old_addr).
+ *
* The code segment at @rec->ip should be a caller to @old_addr
*
* Return must be:
@@ -42,6 +42,9 @@ config HAVE_DYNAMIC_FTRACE_WITH_REGS
config HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
bool
+config HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
+ bool
+
config HAVE_DYNAMIC_FTRACE_WITH_ARGS
bool
help
@@ -257,6 +260,10 @@ config DYNAMIC_FTRACE_WITH_DIRECT_CALLS
depends on DYNAMIC_FTRACE_WITH_REGS
depends on HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+config DYNAMIC_FTRACE_WITH_CALL_OPS
+ def_bool y
+ depends on HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
+
config DYNAMIC_FTRACE_WITH_ARGS
def_bool y
depends on DYNAMIC_FTRACE
@@ -125,6 +125,33 @@ struct ftrace_ops global_ops;
void ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct ftrace_regs *fregs);
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+/*
+ * Stub used to invoke the list ops without requiring a separate trampoline.
+ */
+const struct ftrace_ops ftrace_list_ops = {
+ .func = ftrace_ops_list_func,
+ .flags = FTRACE_OPS_FL_STUB,
+};
+
+static void ftrace_ops_nop_func(unsigned long ip, unsigned long parent_ip,
+ struct ftrace_ops *op,
+ struct ftrace_regs *fregs)
+{
+ /* do nothing */
+}
+
+/*
+ * Stub used when a call site is disabled. May be called transiently by threads
+ * which have made it into ftrace_caller but haven't yet recovered the ops at
+ * the point the call site is disabled.
+ */
+const struct ftrace_ops ftrace_nop_ops = {
+ .func = ftrace_ops_nop_func,
+ .flags = FTRACE_OPS_FL_STUB,
+};
+#endif
+
static inline void ftrace_ops_init(struct ftrace_ops *ops)
{
#ifdef CONFIG_DYNAMIC_FTRACE
@@ -1814,6 +1841,18 @@ static bool __ftrace_hash_rec_update(struct ftrace_ops *ops,
* if rec count is zero.
*/
}
+
+ /*
+ * If the rec has a single associated ops, and ops->func can be
+ * called directly, allow the call site to call via the ops.
+ */
+ if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS) &&
+ ftrace_rec_count(rec) == 1 &&
+ ftrace_ops_get_func(ops) == ops->func)
+ rec->flags |= FTRACE_FL_CALL_OPS;
+ else
+ rec->flags &= ~FTRACE_FL_CALL_OPS;
+
count++;
/* Must match FTRACE_UPDATE_CALLS in ftrace_modify_all_code() */
@@ -2108,8 +2147,9 @@ void ftrace_bug(int failed, struct dyn_ftrace *rec)
struct ftrace_ops *ops = NULL;
pr_info("ftrace record flags: %lx\n", rec->flags);
- pr_cont(" (%ld)%s", ftrace_rec_count(rec),
- rec->flags & FTRACE_FL_REGS ? " R" : " ");
+ pr_cont(" (%ld)%s%s", ftrace_rec_count(rec),
+ rec->flags & FTRACE_FL_REGS ? " R" : " ",
+ rec->flags & FTRACE_FL_CALL_OPS ? " O" : " ");
if (rec->flags & FTRACE_FL_TRAMP_EN) {
ops = ftrace_find_tramp_ops_any(rec);
if (ops) {
@@ -2177,6 +2217,7 @@ static int ftrace_check_record(struct dyn_ftrace *rec, bool enable, bool update)
* want the direct enabled (it will be done via the
* direct helper). But if DIRECT_EN is set, and
* the count is not one, we need to clear it.
+ *
*/
if (ftrace_rec_count(rec) == 1) {
if (!(rec->flags & FTRACE_FL_DIRECT) !=
@@ -2185,6 +2226,19 @@ static int ftrace_check_record(struct dyn_ftrace *rec, bool enable, bool update)
} else if (rec->flags & FTRACE_FL_DIRECT_EN) {
flag |= FTRACE_FL_DIRECT;
}
+
+ /*
+ * Ops calls are special, as count matters.
+ * As with direct calls, they must only be enabled when count
+ * is one, otherwise they'll be handled via the list ops.
+ */
+ if (ftrace_rec_count(rec) == 1) {
+ if (!(rec->flags & FTRACE_FL_CALL_OPS) !=
+ !(rec->flags & FTRACE_FL_CALL_OPS_EN))
+ flag |= FTRACE_FL_CALL_OPS;
+ } else if (rec->flags & FTRACE_FL_CALL_OPS_EN) {
+ flag |= FTRACE_FL_CALL_OPS;
+ }
}
/* If the state of this record hasn't changed, then do nothing */
@@ -2229,6 +2283,21 @@ static int ftrace_check_record(struct dyn_ftrace *rec, bool enable, bool update)
rec->flags &= ~FTRACE_FL_DIRECT_EN;
}
}
+
+ if (flag & FTRACE_FL_CALL_OPS) {
+ if (ftrace_rec_count(rec) == 1) {
+ if (rec->flags & FTRACE_FL_CALL_OPS)
+ rec->flags |= FTRACE_FL_CALL_OPS_EN;
+ else
+ rec->flags &= ~FTRACE_FL_CALL_OPS_EN;
+ } else {
+ /*
+ * Can only call directly if there's
+ * only one sets of associated ops.
+ */
+ rec->flags &= ~FTRACE_FL_CALL_OPS_EN;
+ }
+ }
}
/*
@@ -2258,7 +2327,8 @@ static int ftrace_check_record(struct dyn_ftrace *rec, bool enable, bool update)
* and REGS states. The _EN flags must be disabled though.
*/
rec->flags &= ~(FTRACE_FL_ENABLED | FTRACE_FL_TRAMP_EN |
- FTRACE_FL_REGS_EN | FTRACE_FL_DIRECT_EN);
+ FTRACE_FL_REGS_EN | FTRACE_FL_DIRECT_EN |
+ FTRACE_FL_CALL_OPS_EN);
}
ftrace_bug_type = FTRACE_BUG_NOP;
@@ -2431,6 +2501,25 @@ ftrace_find_tramp_ops_new(struct dyn_ftrace *rec)
return NULL;
}
+struct ftrace_ops *
+ftrace_find_unique_ops(struct dyn_ftrace *rec)
+{
+ struct ftrace_ops *op, *found = NULL;
+ unsigned long ip = rec->ip;
+
+ do_for_each_ftrace_op(op, ftrace_ops_list) {
+
+ if (hash_contains_ip(ip, op->func_hash)) {
+ if (found)
+ return NULL;
+ found = op;
+ }
+
+ } while_for_each_ftrace_op(op);
+
+ return found;
+}
+
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
/* Protected by rcu_tasks for reading, and direct_mutex for writing */
static struct ftrace_hash *direct_functions = EMPTY_HASH;
@@ -3780,11 +3869,12 @@ static int t_show(struct seq_file *m, void *v)
if (iter->flags & FTRACE_ITER_ENABLED) {
struct ftrace_ops *ops;
- seq_printf(m, " (%ld)%s%s%s",
+ seq_printf(m, " (%ld)%s%s%s%s",
ftrace_rec_count(rec),
rec->flags & FTRACE_FL_REGS ? " R" : " ",
rec->flags & FTRACE_FL_IPMODIFY ? " I" : " ",
- rec->flags & FTRACE_FL_DIRECT ? " D" : " ");
+ rec->flags & FTRACE_FL_DIRECT ? " D" : " ",
+ rec->flags & FTRACE_FL_CALL_OPS ? " O" : " ");
if (rec->flags & FTRACE_FL_TRAMP_EN) {
ops = ftrace_find_tramp_ops_any(rec);
if (ops) {
@@ -3800,6 +3890,15 @@ static int t_show(struct seq_file *m, void *v)
} else {
add_trampoline_func(m, NULL, rec);
}
+ if (rec->flags & FTRACE_FL_CALL_OPS_EN) {
+ ops = ftrace_find_unique_ops(rec);
+ if (ops) {
+ seq_printf(m, "\tops: %pS (%pS)",
+ ops, ops->func);
+ } else {
+ seq_puts(m, "\tops: ERROR!");
+ }
+ }
if (rec->flags & FTRACE_FL_DIRECT) {
unsigned long direct;
Architectures without dynamic ftrace trampolines incur an overhead when multiple ftrace_ops are enabled with distinct filters. in these cases, each call site calls a common trampoline which uses ftrace_ops_list_func() to iterate over all enabled ftrace functions, and so incurs an overhead relative to the size of this list (including RCU protection overhead). Architectures with dynamic ftrace trampolines avoid this overhead for call sites which have a single associated ftrace_ops. In these cases, the dynamic trampoline is customized to branch directly to the relevant ftrace function, avoiding the list overhead. On some architectures it's impractical and/or undesirable to implement dynamic ftrace trampolines. For example, arm64 has limited branch ranges and cannot always directly branch from a call site to an arbitrary address (e.g. from a kernel text address to an arbitrary module address). Calls from modules to core kernel text can be indirected via PLTs (allocated at module load time) to address this, but the same is not possible from calls from core kernel text. Using an indirect branch from a call site to an arbitrary trampoline is possible, but requires several more instructions in the function prologue (or immediately before it), and/or comes with far more complex requirements for patching. Instead, this patch adds a new option, where an architecture can associate each call site with a pointer to an ftrace_ops, placed at a fixed offset from the call site. A shared trampoline can recover this pointer and call ftrace_ops::func() without needing to go via ftrace_ops_list_func(), avoiding the associated overhead. This avoids issues with branch range limitations, and avoids the need to allocate and manipulate dynamic trampolines, making it far simpler to implement and maintain, while having similar performance characteristics. Note that this allows for dynamic ftrace_ops to be invoked directly from an architecture's ftrace_caller trampoline, whereas existing code forces the use of ftrace_ops_get_list_func(), which is in part necessary to permit the ftrace_ops to be freed once unregistereed *and* to avoid branch/address-generation range limitation on some architectures (e.g. where ops->func is a module address, and may be outside of the direct branch range for callsites within the main kernel image). The CALL_OPS approach avoids this problems and is safe as: * The existing synchronization in ftrace_shutdown() using ftrace_shutdown() using synchronize_rcu_tasks_rude() (and synchronize_rcu_tasks()) ensures that no tasks hold a stale reference to an ftrace_ops (e.g. in the middle of the ftrace_caller trampoline, or while invoking ftrace_ops::func), when that ftrace_ops is unregistered. Arguably this could also be relied upon for the existing scheme, permitting dynamic ftrace_ops to be invoked directly when ops->func is in range, but this will require additional logic to handle branch range limitations, and is not handled by this patch. * Each callsite's ftrace_ops pointer literal can hold any valid kernel address, and is updated atomically. As an architecture's ftrace_caller trampoline will atomically load the ops pointer then derefrence ops->func, there is no risk of invoking ops->func with a mismatches ops pointer, and updates to the ops pointer do not require special care. A subsequent patch will implement architectures support for arm64. There should be no functional change as a result of this patch alone. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Florent Revest <revest@chromium.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will@kernel.org> --- include/linux/ftrace.h | 18 +++++-- kernel/trace/Kconfig | 7 +++ kernel/trace/ftrace.c | 109 +++++++++++++++++++++++++++++++++++++++-- 3 files changed, 125 insertions(+), 9 deletions(-)