| Message ID | 20230119144236.3541751-9-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | TQMLS1021A support | expand |
On 19/01/2023 15:42, Alexander Stein wrote: > This enables drivers used on TQMLS102xA + MBLS1021A. Do not use "This (commit/patch)". https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95 > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index ee184eb37adcf..441a449172368 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -191,6 +191,7 @@ CONFIG_PCI_TEGRA=y > CONFIG_PCI_RCAR_GEN2=y > CONFIG_PCIE_RCAR_HOST=y > CONFIG_PCI_DRA7XX_EP=y > +CONFIG_PCI_LAYERSCAPE=y > CONFIG_PCI_ENDPOINT=y > CONFIG_PCI_ENDPOINT_CONFIGFS=y > CONFIG_PCI_EPF_TEST=m > @@ -249,6 +250,7 @@ CONFIG_AHCI_ST=y > CONFIG_AHCI_IMX=y > CONFIG_AHCI_SUNXI=y > CONFIG_AHCI_TEGRA=y > +CONFIG_AHCI_QORIQ=y > CONFIG_SATA_HIGHBANK=y > CONFIG_SATA_MV=y > CONFIG_SATA_RCAR=y > @@ -329,6 +331,7 @@ CONFIG_TOUCHSCREEN_ADC=m > CONFIG_TOUCHSCREEN_ATMEL_MXT=m > CONFIG_TOUCHSCREEN_ELAN=m > CONFIG_TOUCHSCREEN_MMS114=m > +CONFIG_TOUCHSCREEN_EDT_FT5X06=m > CONFIG_TOUCHSCREEN_WM97XX=m > CONFIG_TOUCHSCREEN_ST1232=m > CONFIG_TOUCHSCREEN_STMPE=y > @@ -483,6 +486,7 @@ CONFIG_GPIO_ASPEED_SGPIO=y > CONFIG_GPIO_DAVINCI=y > CONFIG_GPIO_DWAPB=y > CONFIG_GPIO_EM=y > +CONFIG_GPIO_MPC8XXX=y module > CONFIG_GPIO_MXC=y > CONFIG_GPIO_RCAR=y > CONFIG_GPIO_SYSCON=y > @@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y > CONFIG_GPIO_PCA953X_IRQ=y > CONFIG_GPIO_PCF857X=y > CONFIG_GPIO_PALMAS=y > +CONFIG_GPIO_STMPE=y module > CONFIG_GPIO_TPS6586X=y > CONFIG_GPIO_TPS65910=y > CONFIG_GPIO_TWL4030=y > @@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m > CONFIG_CPU_THERMAL=y > CONFIG_DEVFREQ_THERMAL=y > CONFIG_IMX_THERMAL=y > +CONFIG_QORIQ_THERMAL=m > CONFIG_ROCKCHIP_THERMAL=y > CONFIG_RCAR_THERMAL=y > CONFIG_ARMADA_THERMAL=y > @@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m > CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m > CONFIG_SND_SOC_SGTL5000=m > CONFIG_SND_SOC_STI_SAS=m > +CONFIG_SND_SOC_TLV320AIC32X4=m > +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m > CONFIG_SND_SOC_WM8978=m > CONFIG_SND_AUDIO_GRAPH_CARD=m > CONFIG_USB=y > @@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y > CONFIG_USB_XHCI_TEGRA=m > CONFIG_USB_BRCMSTB=m > CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_FSL=y module > CONFIG_USB_EHCI_HCD_STI=y > CONFIG_USB_EHCI_EXYNOS=m > CONFIG_USB_EHCI_MV=m > @@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y > CONFIG_LEDS_CLASS=y > CONFIG_LEDS_CLASS_FLASH=m > CONFIG_LEDS_CPCAP=m > +CONFIG_LEDS_PCA9532=m > +CONFIG_LEDS_PCA9532_GPIO=y > CONFIG_LEDS_GPIO=y > CONFIG_LEDS_PWM=y > CONFIG_LEDS_MAX8997=m > @@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y > CONFIG_LEDS_TRIGGER_TRANSIENT=y > CONFIG_LEDS_TRIGGER_CAMERA=y > CONFIG_EDAC=y > +CONFIG_EDAC_LAYERSCAPE=y > CONFIG_EDAC_HIGHBANK_MC=y > CONFIG_EDAC_HIGHBANK_L2=y > CONFIG_RTC_CLASS=y > @@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m > CONFIG_RTC_DRV_MAX77686=y > CONFIG_RTC_DRV_RK808=m > CONFIG_RTC_DRV_RS5C372=m > +CONFIG_RTC_DRV_PCF85063=y module > CONFIG_RTC_DRV_PCF85363=m > CONFIG_RTC_DRV_BQ32K=m > CONFIG_RTC_DRV_TWL4030=y Best regards, Krzysztof
Hi Krzysztof, thanks for the feedback. Am Donnerstag, 19. Januar 2023, 18:04:31 CET schrieb Krzysztof Kozlowski: > On 19/01/2023 15:42, Alexander Stein wrote: > > This enables drivers used on TQMLS102xA + MBLS1021A. > > Do not use "This (commit/patch)". > https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submit > ting-patches.rst#L95 Thanks, this sounds much better. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > --- > > > > arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++ > > 1 file changed, 13 insertions(+) > > > > diff --git a/arch/arm/configs/multi_v7_defconfig > > b/arch/arm/configs/multi_v7_defconfig index ee184eb37adcf..441a449172368 > > 100644 > > --- a/arch/arm/configs/multi_v7_defconfig > > +++ b/arch/arm/configs/multi_v7_defconfig > > @@ -191,6 +191,7 @@ CONFIG_PCI_TEGRA=y > > > > CONFIG_PCI_RCAR_GEN2=y > > CONFIG_PCIE_RCAR_HOST=y > > CONFIG_PCI_DRA7XX_EP=y > > > > +CONFIG_PCI_LAYERSCAPE=y > > > > CONFIG_PCI_ENDPOINT=y > > CONFIG_PCI_ENDPOINT_CONFIGFS=y > > CONFIG_PCI_EPF_TEST=m > > > > @@ -249,6 +250,7 @@ CONFIG_AHCI_ST=y > > > > CONFIG_AHCI_IMX=y > > CONFIG_AHCI_SUNXI=y > > CONFIG_AHCI_TEGRA=y > > > > +CONFIG_AHCI_QORIQ=y > > > > CONFIG_SATA_HIGHBANK=y > > CONFIG_SATA_MV=y > > CONFIG_SATA_RCAR=y > > > > @@ -329,6 +331,7 @@ CONFIG_TOUCHSCREEN_ADC=m > > > > CONFIG_TOUCHSCREEN_ATMEL_MXT=m > > CONFIG_TOUCHSCREEN_ELAN=m > > CONFIG_TOUCHSCREEN_MMS114=m > > > > +CONFIG_TOUCHSCREEN_EDT_FT5X06=m > > > > CONFIG_TOUCHSCREEN_WM97XX=m > > CONFIG_TOUCHSCREEN_ST1232=m > > CONFIG_TOUCHSCREEN_STMPE=y > > > > @@ -483,6 +486,7 @@ CONFIG_GPIO_ASPEED_SGPIO=y > > > > CONFIG_GPIO_DAVINCI=y > > CONFIG_GPIO_DWAPB=y > > CONFIG_GPIO_EM=y > > > > +CONFIG_GPIO_MPC8XXX=y > > module Sounds reasonable, but it's not actually possible, it's just a bool. > > CONFIG_GPIO_MXC=y > > CONFIG_GPIO_RCAR=y > > CONFIG_GPIO_SYSCON=y > > > > @@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y > > > > CONFIG_GPIO_PCA953X_IRQ=y > > CONFIG_GPIO_PCF857X=y > > CONFIG_GPIO_PALMAS=y > > > > +CONFIG_GPIO_STMPE=y > > module That one as well, it's just a bool. > > CONFIG_GPIO_TPS6586X=y > > CONFIG_GPIO_TPS65910=y > > CONFIG_GPIO_TWL4030=y > > > > @@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m > > > > CONFIG_CPU_THERMAL=y > > CONFIG_DEVFREQ_THERMAL=y > > CONFIG_IMX_THERMAL=y > > > > +CONFIG_QORIQ_THERMAL=m > > > > CONFIG_ROCKCHIP_THERMAL=y > > CONFIG_RCAR_THERMAL=y > > CONFIG_ARMADA_THERMAL=y > > > > @@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m > > > > CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m > > CONFIG_SND_SOC_SGTL5000=m > > CONFIG_SND_SOC_STI_SAS=m > > > > +CONFIG_SND_SOC_TLV320AIC32X4=m > > +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m > > > > CONFIG_SND_SOC_WM8978=m > > CONFIG_SND_AUDIO_GRAPH_CARD=m > > CONFIG_USB=y > > > > @@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y > > > > CONFIG_USB_XHCI_TEGRA=m > > CONFIG_USB_BRCMSTB=m > > CONFIG_USB_EHCI_HCD=y > > > > +CONFIG_USB_EHCI_FSL=y > > module Well, apparently module autoload is broken due to wrong modalias value of ehci node created by fsl-mph-dr-of. This setting this as a module is currently not working. > > CONFIG_USB_EHCI_HCD_STI=y > > CONFIG_USB_EHCI_EXYNOS=m > > CONFIG_USB_EHCI_MV=m > > > > @@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y > > > > CONFIG_LEDS_CLASS=y > > CONFIG_LEDS_CLASS_FLASH=m > > CONFIG_LEDS_CPCAP=m > > > > +CONFIG_LEDS_PCA9532=m > > +CONFIG_LEDS_PCA9532_GPIO=y > > > > CONFIG_LEDS_GPIO=y > > CONFIG_LEDS_PWM=y > > CONFIG_LEDS_MAX8997=m > > > > @@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y > > > > CONFIG_LEDS_TRIGGER_TRANSIENT=y > > CONFIG_LEDS_TRIGGER_CAMERA=y > > CONFIG_EDAC=y > > > > +CONFIG_EDAC_LAYERSCAPE=y > > > > CONFIG_EDAC_HIGHBANK_MC=y > > CONFIG_EDAC_HIGHBANK_L2=y > > CONFIG_RTC_CLASS=y > > > > @@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m > > > > CONFIG_RTC_DRV_MAX77686=y > > CONFIG_RTC_DRV_RK808=m > > CONFIG_RTC_DRV_RS5C372=m > > > > +CONFIG_RTC_DRV_PCF85063=y > > module Okay, module it is. So I assume it is acceptable the system time is set much later after mounting rootfs then? > > CONFIG_RTC_DRV_PCF85363=m > > CONFIG_RTC_DRV_BQ32K=m > > CONFIG_RTC_DRV_TWL4030=y > > Best regards, > Krzysztof Best regards, Alexander
On 20/01/2023 12:12, Alexander Stein wrote: >>> CONFIG_GPIO_MXC=y >>> CONFIG_GPIO_RCAR=y >>> CONFIG_GPIO_SYSCON=y >>> >>> @@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y >>> >>> CONFIG_GPIO_PCA953X_IRQ=y >>> CONFIG_GPIO_PCF857X=y >>> CONFIG_GPIO_PALMAS=y >>> >>> +CONFIG_GPIO_STMPE=y >> >> module > > That one as well, it's just a bool. OK > >>> CONFIG_GPIO_TPS6586X=y >>> CONFIG_GPIO_TPS65910=y >>> CONFIG_GPIO_TWL4030=y >>> >>> @@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m >>> >>> CONFIG_CPU_THERMAL=y >>> CONFIG_DEVFREQ_THERMAL=y >>> CONFIG_IMX_THERMAL=y >>> >>> +CONFIG_QORIQ_THERMAL=m >>> >>> CONFIG_ROCKCHIP_THERMAL=y >>> CONFIG_RCAR_THERMAL=y >>> CONFIG_ARMADA_THERMAL=y >>> >>> @@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m >>> >>> CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m >>> CONFIG_SND_SOC_SGTL5000=m >>> CONFIG_SND_SOC_STI_SAS=m >>> >>> +CONFIG_SND_SOC_TLV320AIC32X4=m >>> +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m >>> >>> CONFIG_SND_SOC_WM8978=m >>> CONFIG_SND_AUDIO_GRAPH_CARD=m >>> CONFIG_USB=y >>> >>> @@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y >>> >>> CONFIG_USB_XHCI_TEGRA=m >>> CONFIG_USB_BRCMSTB=m >>> CONFIG_USB_EHCI_HCD=y >>> >>> +CONFIG_USB_EHCI_FSL=y >> >> module > > Well, apparently module autoload is broken due to wrong modalias value of ehci > node created by fsl-mph-dr-of. This setting this as a module is currently not > working. But this is not valid argument for defconfig change. This must be module. If autoloading does not work, fix that one. > >>> CONFIG_USB_EHCI_HCD_STI=y >>> CONFIG_USB_EHCI_EXYNOS=m >>> CONFIG_USB_EHCI_MV=m >>> >>> @@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y >>> >>> CONFIG_LEDS_CLASS=y >>> CONFIG_LEDS_CLASS_FLASH=m >>> CONFIG_LEDS_CPCAP=m >>> >>> +CONFIG_LEDS_PCA9532=m >>> +CONFIG_LEDS_PCA9532_GPIO=y >>> >>> CONFIG_LEDS_GPIO=y >>> CONFIG_LEDS_PWM=y >>> CONFIG_LEDS_MAX8997=m >>> >>> @@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y >>> >>> CONFIG_LEDS_TRIGGER_TRANSIENT=y >>> CONFIG_LEDS_TRIGGER_CAMERA=y >>> CONFIG_EDAC=y >>> >>> +CONFIG_EDAC_LAYERSCAPE=y >>> >>> CONFIG_EDAC_HIGHBANK_MC=y >>> CONFIG_EDAC_HIGHBANK_L2=y >>> CONFIG_RTC_CLASS=y >>> >>> @@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m >>> >>> CONFIG_RTC_DRV_MAX77686=y >>> CONFIG_RTC_DRV_RK808=m >>> CONFIG_RTC_DRV_RS5C372=m >>> >>> +CONFIG_RTC_DRV_PCF85063=y >> >> module > > Okay, module it is. So I assume it is acceptable the system time is set much > later after mounting rootfs then? Modules can be loaded from initramfs, not rootfs. Defconfig=y is only for critical stuff needed to bring initramfs. Time is not needed for initramfs. Best regards, Krzysztof
On Fri, Jan 20, 2023 at 12:35:41PM +0100, Krzysztof Kozlowski wrote: > Defconfig=y is only for critical stuff needed to bring initramfs. Time > is not needed for initramfs. Are I2C drivers "critical stuff"? What about AHCI drivers? What about all the USB HCI drivers? USB Storage can certainly be loaded from an initramfs, yet it's =y. LED triggers? Loads of RTC drivers that are marked as =y? XOR drivers? VIRTIO drivers? Filesystems? I seem to remember Red Hat sets even popular filesystems to be a module in their kernel. Clearly, "defconfig=y is only for critical stuff" is rather false in practice, and I suspect is little more than a desire rather than a rule. I suspect it's more "defconfig=y is for stuff that makes most platforms successfully boot without an initramfs".
On 20/01/2023 15:57, Russell King (Oracle) wrote: > On Fri, Jan 20, 2023 at 12:35:41PM +0100, Krzysztof Kozlowski wrote: >> Defconfig=y is only for critical stuff needed to bring initramfs. Time >> is not needed for initramfs. > > Are I2C drivers "critical stuff"? What about AHCI drivers? What about > all the USB HCI drivers? USB Storage can certainly be loaded from an > initramfs, yet it's =y. LED triggers? Loads of RTC drivers that are > marked as =y? XOR drivers? VIRTIO drivers? Filesystems? I seem to > remember Red Hat sets even popular filesystems to be a module in their > kernel. Almost all your answers above - these should be =m. USB not always, because it is used for USB Ethernet adapters which is used for network boot (although even then initramfs comes with actual drivers...) > > Clearly, "defconfig=y is only for critical stuff" is rather false in > practice, and I suspect is little more than a desire rather than a > rule. I suspect it's more "defconfig=y is for stuff that makes most > platforms successfully boot without an initramfs". Yes, that's true, although there was already pushback against this. Having an initramfs is not a big deal and nowadays I think all new ARMv8 platforms use it. Anyway this talk here is about RTC which is not needed at all as built in. Best regards, Krzysztof
On Sat, Jan 21, 2023 at 09:27:52PM +0100, Krzysztof Kozlowski wrote: > On 20/01/2023 15:57, Russell King (Oracle) wrote: > > Clearly, "defconfig=y is only for critical stuff" is rather false in > > practice, and I suspect is little more than a desire rather than a > > rule. I suspect it's more "defconfig=y is for stuff that makes most > > platforms successfully boot without an initramfs". > > Yes, that's true, although there was already pushback against this. > Having an initramfs is not a big deal and nowadays I think all new ARMv8 > platforms use it. > > Anyway this talk here is about RTC which is not needed at all as built in. Provided NFS doesn't repeat XIDs at boot (which it used to when the kernel had no idea what the TOD is.) I believe the NFS standard allows NFS servers to repeat their response to a repeated XID even if the request is different... which used to cause chaos for me with a machine that has no RTC and boots using NFS root. So just be aware that if the NFS XID is still dependent on TOD, then not having RTCs loaded can cause chaos.
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ee184eb37adcf..441a449172368 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -191,6 +191,7 @@ CONFIG_PCI_TEGRA=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR_HOST=y CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_LAYERSCAPE=y CONFIG_PCI_ENDPOINT=y CONFIG_PCI_ENDPOINT_CONFIGFS=y CONFIG_PCI_EPF_TEST=m @@ -249,6 +250,7 @@ CONFIG_AHCI_ST=y CONFIG_AHCI_IMX=y CONFIG_AHCI_SUNXI=y CONFIG_AHCI_TEGRA=y +CONFIG_AHCI_QORIQ=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y @@ -329,6 +331,7 @@ CONFIG_TOUCHSCREEN_ADC=m CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_ELAN=m CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y @@ -483,6 +486,7 @@ CONFIG_GPIO_ASPEED_SGPIO=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_EM=y +CONFIG_GPIO_MPC8XXX=y CONFIG_GPIO_MXC=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_SYSCON=y @@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_STMPE=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_TWL4030=y @@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y CONFIG_IMX_THERMAL=y +CONFIG_QORIQ_THERMAL=m CONFIG_ROCKCHIP_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y @@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_STI_SAS=m +CONFIG_SND_SOC_TLV320AIC32X4=m +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m CONFIG_SND_SOC_WM8978=m CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_USB=y @@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_XHCI_TEGRA=m CONFIG_USB_BRCMSTB=m CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_STI=y CONFIG_USB_EHCI_EXYNOS=m CONFIG_USB_EHCI_MV=m @@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=m CONFIG_LEDS_CPCAP=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_PCA9532_GPIO=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_MAX8997=m @@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_EDAC=y +CONFIG_EDAC_LAYERSCAPE=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y @@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_PCF85063=y CONFIG_RTC_DRV_PCF85363=m CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_TWL4030=y
This enables drivers used on TQMLS102xA + MBLS1021A. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+)