| Message ID | 20230122-msm8974-bacon-features-v1-3-4049f565c24c@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for some features on OnePlus One | expand |
On 22.01.2023 17:48, Luca Weiss wrote: > Add nodes for the volume buttons and the hall sensor that are found on > the device. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 50 ++++++++++++++++++++++ > 1 file changed, 50 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts > index 63180fe1d292..10ba3c94e26d 100644 > --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts > +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts > @@ -19,6 +19,38 @@ aliases { > chosen { > stdout-path = "serial0:115200n8"; > }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>; pinctrl-N pinctrl-names please > + > + key-volume-down { > + label = "Volume Down"; > + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + wakeup-source; > + debounce-interval = <15>; > + }; > + > + key-volume-up { > + label = "Volume Up"; > + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + wakeup-source; > + debounce-interval = <15>; > + }; > + > + event-hall-sensor { > + label = "Hall Effect Sensor"; > + gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; > + linux,input-type = <EV_SW>; > + linux,code = <SW_LID>; > + linux,can-disable; > + debounce-interval = <150>; > + }; > + }; > }; > > &blsp1_i2c1 { > @@ -95,6 +127,17 @@ &pm8941_coincell { > status = "okay"; > }; > > +&pm8941_gpios { > + gpio_keys_default: gpio-keys-active-state { > + pins = "gpio2", "gpio5"; > + function = "normal"; > + Unnecessary newline Konrad > + input-enable; > + bias-disable; > + power-source = <PM8941_GPIO_S3>; > + }; > +}; > + > &pm8941_vib { > status = "okay"; > }; > @@ -349,6 +392,13 @@ &sdhc_1 { > }; > > &tlmm { > + gpio_hall_sensor_default: gpio-hall-sensor-default-state { > + pins = "gpio68"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > sdc1_on: sdc1-on-state { > clk-pins { > pins = "sdc1_clk"; >
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index 63180fe1d292..10ba3c94e26d 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts @@ -19,6 +19,38 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + debounce-interval = <150>; + }; + }; }; &blsp1_i2c1 { @@ -95,6 +127,17 @@ &pm8941_coincell { status = "okay"; }; +&pm8941_gpios { + gpio_keys_default: gpio-keys-active-state { + pins = "gpio2", "gpio5"; + function = "normal"; + + input-enable; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; +}; + &pm8941_vib { status = "okay"; }; @@ -349,6 +392,13 @@ &sdhc_1 { }; &tlmm { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio68"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + sdc1_on: sdc1-on-state { clk-pins { pins = "sdc1_clk";
Add nodes for the volume buttons and the hall sensor that are found on the device. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- .../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+)