Message ID | 20230123192712.84537-2-dinguyen@kernel.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2] arm64: dts: add pinctrl-single property for Stratix10/Agilex | expand |
On 23/01/2023 20:27, Dinh Nguyen wrote: > Add the I2C pins definition to the Stratix10 devkit. This allows for the > I2C driver to use pinctrl on the pins to allow for GPIO recovery. > > Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> > --- > .../dts/altera/socfpga_stratix10_socdk.dts | 23 +++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts > index 17752ca743e5..beda04b9380b 100644 > --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts > +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts > @@ -65,6 +65,22 @@ sdmmca-ecc@ff8c8c00 { > }; > }; > > +&pinctrl0 { > + i2c1_pmx_func: i2c1_pmx_func { No underscores in node names. > + pinctrl-single,pins = < > + 0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ > + 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ > + >; > + }; > + > + i2c1_pmx_func_gpio: i2c1_pmx_func_gpio { Same here. > + pinctrl-single,pins = < > + 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ > + 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */ > + >; > + }; > +}; > + > &gpio1 { Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 17752ca743e5..beda04b9380b 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -65,6 +65,22 @@ sdmmca-ecc@ff8c8c00 { }; }; +&pinctrl0 { + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ + 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ + >; + }; + + i2c1_pmx_func_gpio: i2c1_pmx_func_gpio { + pinctrl-single,pins = < + 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ + 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */ + >; + }; +}; + &gpio1 { status = "okay"; }; @@ -131,6 +147,13 @@ &i2c1 { i2c-sda-falling-time-ns = <890>; /* hcnt */ i2c-sdl-falling-time-ns = <890>; /* lcnt */ + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c1_pmx_func>; + pinctrl-1 = <&i2c1_pmx_func_gpio>; + + scl-gpios = <&portb 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&portb 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + adc@14 { compatible = "lltc,ltc2497"; reg = <0x14>;
Add the I2C pins definition to the Stratix10 devkit. This allows for the I2C driver to use pinctrl on the pins to allow for GPIO recovery. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- .../dts/altera/socfpga_stratix10_socdk.dts | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+)