| Message ID | Y9AJ07zT1lpBLhPk@mt.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | input: pwm-beeper: add feature to set volume | expand |
On 24/01/2023 17:39, Manuel Traut wrote: > Converts txt binding to new YAML format. > > Signed-off-by: Manuel Traut <manuel.traut@mt.com> > --- > .../devicetree/bindings/input/pwm-beeper.txt | 24 ---------- > .../devicetree/bindings/input/pwm-beeper.yaml | 48 +++++++++++++++++++ > 2 files changed, 48 insertions(+), 24 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.txt > create mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.yaml > > diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt > deleted file mode 100644 > index 8fc0e48c20db..000000000000 > --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt > +++ /dev/null > @@ -1,24 +0,0 @@ > -* PWM beeper device tree bindings > - > -Registers a PWM device as beeper. > - > -Required properties: > -- compatible: should be "pwm-beeper" > -- pwms: phandle to the physical PWM device > - > -Optional properties: > -- amp-supply: phandle to a regulator that acts as an amplifier for the beeper > -- beeper-hz: bell frequency in Hz > - > -Example: > - > -beeper_amp: amplifier { > - compatible = "fixed-regulator"; > - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; > -}; > - > -beeper { > - compatible = "pwm-beeper"; > - pwms = <&pwm0>; > - amp-supply = <&beeper_amp>; > -}; > diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml > new file mode 100644 > index 000000000000..24a40f0f77c1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2Does not look like you tested the bindings. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). > +--- > +$id: "http://devicetree.org/schemas/input/pwm-beeper.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: PWM beeper device tree bindings Drop: device tree bindings > + > +maintainers: > + - Dmitry Torokhov <dmitry.torokhov@gmail.com> > + > +description: Registers a PWM device as beeper. > + > +properties: > + compatible: > + const: pwm-beeper Does not look like you tested the bindings. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Start from scratch from example-schema. There are so many mistakes here it should be seriously rework. Best regards, Krzysztof
On Tue, 24 Jan 2023 17:39:47 +0100, Manuel Traut wrote: > Converts txt binding to new YAML format. > > Signed-off-by: Manuel Traut <manuel.traut@mt.com> > --- > .../devicetree/bindings/input/pwm-beeper.txt | 24 ---------- > .../devicetree/bindings/input/pwm-beeper.yaml | 48 +++++++++++++++++++ > 2 files changed, 48 insertions(+), 24 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.txt > create mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/input/pwm-beeper.yaml:10:1: [error] syntax error: found character '\t' that cannot start any token (syntax) dtschema/dtc warnings/errors: make[1]: *** Deleting file 'Documentation/devicetree/bindings/input/pwm-beeper.example.dts' Documentation/devicetree/bindings/input/pwm-beeper.yaml:10:1: found character '\t' that cannot start any token make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/input/pwm-beeper.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/input/pwm-beeper.yaml:10:1: found character '\t' that cannot start any token /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/pwm-beeper.yaml: ignoring, error parsing file make: *** [Makefile:1508: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/Y9AJ07zT1lpBLhPk@mt.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt deleted file mode 100644 index 8fc0e48c20db..000000000000 --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt +++ /dev/null @@ -1,24 +0,0 @@ -* PWM beeper device tree bindings - -Registers a PWM device as beeper. - -Required properties: -- compatible: should be "pwm-beeper" -- pwms: phandle to the physical PWM device - -Optional properties: -- amp-supply: phandle to a regulator that acts as an amplifier for the beeper -- beeper-hz: bell frequency in Hz - -Example: - -beeper_amp: amplifier { - compatible = "fixed-regulator"; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; -}; - -beeper { - compatible = "pwm-beeper"; - pwms = <&pwm0>; - amp-supply = <&beeper_amp>; -}; diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml new file mode 100644 index 000000000000..24a40f0f77c1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/pwm-beeper.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: PWM beeper device tree bindings + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +description: Registers a PWM device as beeper. + +properties: + compatible: + const: pwm-beeper + + pwms: + description: phandle to the physical PWM device + minItems: 1 + maxItems: 1 + + amp-supply: + description: > + phandle to a regulator that acts as an amplifier for + the beeper + + beeper-hz: + description: bell frequency in Hz + +required: + - compatible + - pwms + +additionalProperties: false + +examples: + - | + beeper_amp: amplifier { + compatible = "fixed-regulator"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + }; + + beeper { + compatible = "pwm-beeper"; + pwms = <&pwm0>; + amp-supply = <&beeper_amp>; + };
Converts txt binding to new YAML format. Signed-off-by: Manuel Traut <manuel.traut@mt.com> --- .../devicetree/bindings/input/pwm-beeper.txt | 24 ---------- .../devicetree/bindings/input/pwm-beeper.yaml | 48 +++++++++++++++++++ 2 files changed, 48 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.txt create mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.yaml