[v2,1/2] ASoC: sma1303: Add driver for Iron Device SMA1303 Amp

Commit Message

Ki-Seok Jo Jan. 9, 2023, 9:14 a.m. UTC

The Iron Device SMA1303 is a boosted Class-D audio amplifier.

Signed-off-by: Kiseok Jo <[e-mail]>
---
v2: Modified to match kernel coding style.
---
 sound/soc/codecs/Kconfig   |    7 +
 sound/soc/codecs/Makefile  |    2 +
 sound/soc/codecs/sma1303.c | 1746 ++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/sma1303.h |  616 +++++++++++++
 4 files changed, 2371 insertions(+)
 create mode 100644 sound/soc/codecs/sma1303.c
 create mode 100644 sound/soc/codecs/sma1303.h

Comments

Mark Brown Jan. 13, 2023, 3:34 p.m. UTC | #1

On Mon, Jan 09, 2023 at 06:14:01PM +0900, Kiseok Jo wrote:

> The Iron Device SMA1303 is a boosted Class-D audio amplifier.

This looks pretty good now, there's some things that need fixing below
but nothing too huge.

> +		result = true;
> +		break;
> +	default:
> +		result = false;
> +	}

Please put the break statements in for all cases, even the last one.

> +void sma1303_set_callback_func(struct callback_ops ops)
> +{
> +	if (ops.set_i2c_err)
> +		gCallback.set_i2c_err = ops.set_i2c_err;
> +}
> +EXPORT_SYMBOL(sma1303_set_callback_func);

ASoC symbols should be _GPL, and variables shouldn't use hungarian
notation, but in any case this callback looks very questionable - why is
it needed?  Looking at the uses...

> +static int sma1303_regmap_write(struct sma1303_priv *sma1303,
> +				unsigned int reg, unsigned int val)
> +{
> +	int ret = 0;
> +	int cnt = sma1303->retry_cnt;
> +
> +	while (cnt--) {
> +		ret = regmap_write(sma1303->regmap, reg, val);
> +		if (ret < 0) {
> +			dev_err(sma1303->dev,
> +					"Failed to write [0x%02X]\n", reg);
> +			if (gCallback.set_i2c_err)
> +				gCallback.set_i2c_err(sma1303->dev, ret);
> +		} else
> +			break;
> +	}
> +	return ret;

...this isn't something we do in other drivers, not just the callback
but the whole retry mechanism.  Is it really the device itself that's
this unstable, the callback suggests it might be the board?  It feels
like if this is needed it'd fit better in regmap rather than wrapping
things in the driver.

> +static int sma1303_force_mute_get(struct snd_kcontrol *kcontrol,
> +				struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component =
> +		snd_soc_kcontrol_component(kcontrol);
> +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> +
> +	ucontrol->value.integer.value[0] = (int)sma1303->force_mute_status;
> +	dev_info(sma1303->dev, "%s : Force Mute %s\n", __func__,
> +			sma1303->force_mute_status ? "ON" : "OFF");

If you must add logging use dev_dbg() to avoid spamming the console,
same for most of the other logging at dev_info().

> +static int sma1303_force_mute_put(struct snd_kcontrol *kcontrol,
> +				struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component =
> +		snd_soc_kcontrol_component(kcontrol);
> +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> +
> +	sma1303->force_mute_status = (bool)ucontrol->value.integer.value[0];
> +	dev_info(sma1303->dev, "%s : Force Mute %s\n", __func__,
> +			sma1303->force_mute_status ? "ON" : "OFF");
> +
> +	return 0;
> +}

This (and the other controls) should return 1 if the value changed so
events are generated, the mixer-test selftest will spot this and other
errors for you.

> +static int sma1303_postscaler_get(struct snd_kcontrol *kcontrol,
> +				struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component =
> +		snd_soc_kcontrol_component(kcontrol);
> +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> +	int val, ret;
> +
> +	ret = sma1303_regmap_read(sma1303, SMA1303_90_POSTSCALER, &val);
> +	ucontrol->value.integer.value[0] = (val & 0x7E) >> 1;
> +
> +	return ret;
> +}

Here we get with a mask of 0x7e...

> +static int sma1303_postscaler_put(struct snd_kcontrol *kcontrol,
> +				struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component =
> +		snd_soc_kcontrol_component(kcontrol);
> +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> +	int ret, sel = (int)ucontrol->value.integer.value[0];
> +
> +	ret = sma1303_regmap_update_bits(sma1303,
> +			SMA1303_90_POSTSCALER, 0x70, (sel << 1));

...but put with a mask of 0x70.  What's going on with lower bits there?

> +	if (!(sma1303->amp_power_status)) {
> +		dev_info(component->dev, "%s : %s\n",
> +			__func__, "Already AMP Shutdown");
> +		return ret;
> +	}
> +
> +	cancel_delayed_work_sync(&sma1303->check_fault_work);
> +
> +	msleep(55);
> +

That sleep looks odd - what are we delaying after?  

> +static int sma1303_power_event(struct snd_soc_dapm_widget *w,
> +		struct snd_kcontrol *kcontrol, int event)
> +{
> +	struct snd_soc_component *component =
> +		snd_soc_dapm_to_component(w->dapm);
> +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> +	int ret = 0;
> +
> +	switch (event) {
> +	case SND_SOC_DAPM_POST_PMU:
> +		dev_info(sma1303->dev,
> +			"%s : SND_SOC_DAPM_POST_PMU\n", __func__);
> +		ret = sma1303_startup(component);
> +		break;
> +	case SND_SOC_DAPM_PRE_PMD:
> +		dev_info(sma1303->dev,
> +			"%s : SND_SOC_DAPM_PRE_PMD\n", __func__);
> +		ret = sma1303_shutdown(component);
> +		break;
> +	}
> +	return ret;
> +}

If this is done using DAPM then it's a bit concerning that you need the
amp_enabled checks in your startup() and shutdown() functions, DAPM
should refcount appropriately.  TBH I'd just inline those functions,
they are small and only called from here.  I'd also rename this to have
something about it being for the speaker/amplifier in the function name,
it looked like it was a whole CODEC thing.

> +	SOC_SINGLE_BOOL_EXT("Force Mute", 0,
> +		sma1303_force_mute_get, sma1303_force_mute_put),

Simple on/off controls should have Switch at the end of the name -
mixer-test will spot that one too.

> +	for (index = 0; index < ARRAY_SIZE(sma1303_snd_controls); index++) {
> +		sma1303_controls[index] = sma1303_snd_controls[index];
> +		name[index] = devm_kzalloc(sma1303->dev,
> +				MAX_CONTROL_NAME, GFP_KERNEL);
> +		size = strlen(sma1303_snd_controls[index].name)
> +			+ strlen(sma1303->dev->driver->name);

No need to add the driver name or anything here, the core has support
for allowing boards to add prefixes to all the control names if there's
a need to avoid naming clashes which allows things to be more user
friendly and supports more than one of a given device on a board.  See
name_prefix.

> +static int sma1303_dai_mute(struct snd_soc_dai *dai, int mute, int stream)
> +{
> +	struct snd_soc_component *component = dai->component;
> +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> +	int ret = 0;
> +
> +	if (stream == SNDRV_PCM_STREAM_CAPTURE)
> +		return ret;
> +
> +	if (!(sma1303->amp_power_status)) {
> +		dev_info(component->dev, "%s : %s\n",
> +			__func__, "Already AMP Shutdown");
> +		return ret;
> +	}
> +
> +	if (mute) {
> +		dev_info(component->dev, "%s : %s\n", __func__, "MUTE");
> +
> +		ret += sma1303_regmap_update_bits(sma1303,
> +				SMA1303_0E_MUTE_VOL_CTRL,
> +				SMA1303_SPK_MUTE_MASK,
> +				SMA1303_SPK_MUTE);
> +	} else {
> +		if (!sma1303->force_mute_status) {
> +			dev_info(component->dev, "%s : %s\n",
> +					__func__, "UNMUTE");
> +			ret += sma1303_regmap_update_bits(sma1303,
> +					SMA1303_0E_MUTE_VOL_CTRL,
> +					SMA1303_SPK_MUTE_MASK,
> +					SMA1303_SPK_UNMUTE);
> +		} else {
> +			dev_info(sma1303->dev,
> +					"%s : FORCE MUTE!!!\n", __func__);
> +		}
> +	}

If you need to shut the device down to implement mute then it's better
to just not implement it, you shouldn't emulate features in the driver
but instead let the core worry about how to handle that case.  AFAICT
this is why there's the startup/shutdown thing for the speaker amp?

> +	case SND_SOC_DAIFMT_CBS_CFS:

Use the modern names _CBC_CFC 

> +	case SND_SOC_DAIFMT_CBM_CFM:

and _CBP_CFP instead, we're trying to phase out the old defines.

> +static void sma1303_check_fault_worker(struct work_struct *work)
> +{
> +	struct sma1303_priv *sma1303 =
> +		container_of(work, struct sma1303_priv, check_fault_work.work);
> +	int ret = 0;
> +	unsigned int over_temp, ocp_val, uvlo_val;
> +
> +	mutex_lock(&sma1303->lock);
> +

It looks like this mutex is only taken in this function, is it needed?

> +static int sma1303_probe(struct snd_soc_component *component)
> +{
> +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> +	struct snd_soc_dapm_context *dapm =
> +		snd_soc_component_get_dapm(component);
> +	int ret = 0;
> +
> +	ret += sma1303_add_component_controls(component);
> +
> +	snd_soc_dapm_sync(dapm);
> +
> +	ret += sma1303_regmap_write(sma1303,
> +			SMA1303_0A_SPK_VOL, sma1303->init_vol);

Just use the hardware defaults for the registers, let userspace set what
it needs to.

> +static ssize_t check_fault_period_show(struct device *dev,
> +	struct device_attribute *devattr, char *buf)
> +{
> +	struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
> +	int rc;
> +
> +	rc = (int)snprintf(buf, PAGE_SIZE,
> +			"%ld\n", sma1303->check_fault_period);

Use sysfs_emit().

Ki-Seok Jo Jan. 19, 2023, 8:16 a.m. UTC | #2

Thank you for your kindly feedback.

I have some questions and answers.

> > +	if (!(sma1303->amp_power_status)) {
> > +		dev_info(component->dev, "%s : %s\n",
> > +			__func__, "Already AMP Shutdown");
> > +		return ret;
> > +	}
> > +
> > +	cancel_delayed_work_sync(&sma1303->check_fault_work);
> > +
> > +	msleep(55);
> > +

> That sleep looks odd - what are we delaying after?  

It need for IC(Amp) issue.


> > +static int sma1303_dai_mute(struct snd_soc_dai *dai, int mute, int 
> > +stream) {
> > +	struct snd_soc_component *component = dai->component;
> > +	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
> > +	int ret = 0;
> > +
> > +	if (stream == SNDRV_PCM_STREAM_CAPTURE)
> > +		return ret;
> > +
> > +	if (!(sma1303->amp_power_status)) {
> > +		dev_info(component->dev, "%s : %s\n",
> > +			__func__, "Already AMP Shutdown");
> > +		return ret;
> > +	}
> > +
> > +	if (mute) {
> > +		dev_info(component->dev, "%s : %s\n", __func__, "MUTE");
> > +
> > +		ret += sma1303_regmap_update_bits(sma1303,
> > +				SMA1303_0E_MUTE_VOL_CTRL,
> > +				SMA1303_SPK_MUTE_MASK,
> > +				SMA1303_SPK_MUTE);
> > +	} else {
> > +		if (!sma1303->force_mute_status) {
> > +			dev_info(component->dev, "%s : %s\n",
> > +					__func__, "UNMUTE");
> > +			ret += sma1303_regmap_update_bits(sma1303,
> > +					SMA1303_0E_MUTE_VOL_CTRL,
> > +					SMA1303_SPK_MUTE_MASK,
> > +					SMA1303_SPK_UNMUTE);
> > +		} else {
> > +			dev_info(sma1303->dev,
> > +					"%s : FORCE MUTE!!!\n", __func__);
> > +		}
> > +	}

> If you need to shut the device down to implement mute then it's better to just not implement it, you shouldn't emulate features in the driver but instead let the core worry about how to handle that case.  AFAICT this is why there's the startup/shutdown thing for the speaker amp?

This is not power down device. It's only make zero signal level(only mute in amp).
I removed checking power status.


> > +static void sma1303_check_fault_worker(struct work_struct *work) {
> > +	struct sma1303_priv *sma1303 =
> > +		container_of(work, struct sma1303_priv, check_fault_work.work);
> > +	int ret = 0;
> > +	unsigned int over_temp, ocp_val, uvlo_val;
> > +
> > +	mutex_lock(&sma1303->lock);
> > +

> It looks like this mutex is only taken in this function, is it needed?

This function is in workqueue. So, I think it can be done at the same time.

Mark Brown Jan. 19, 2023, 11:25 a.m. UTC | #3

On Thu, Jan 19, 2023 at 08:16:52AM +0000, Ki-Seok Jo wrote:

> > > +	if (!(sma1303->amp_power_status)) {
> > > +		dev_info(component->dev, "%s : %s\n",
> > > +			__func__, "Already AMP Shutdown");
> > > +		return ret;
> > > +	}
> > > +
> > > +	cancel_delayed_work_sync(&sma1303->check_fault_work);
> > > +
> > > +	msleep(55);

> > That sleep looks odd - what are we delaying after?  

> It need for IC(Amp) issue.

Right, but what is the issue?  It's not clear what event we're
delaying for so it's not clear it'll work properly.

> > > +static void sma1303_check_fault_worker(struct work_struct *work) {
> > > +	struct sma1303_priv *sma1303 =
> > > +		container_of(work, struct sma1303_priv, check_fault_work.work);
> > > +	int ret = 0;
> > > +	unsigned int over_temp, ocp_val, uvlo_val;
> > > +
> > > +	mutex_lock(&sma1303->lock);

> > It looks like this mutex is only taken in this function, is it needed?

> This function is in workqueue. So, I think it can be done at the same time. 

A given work_struct should only be schedulable once.

Ki-Seok Jo Jan. 25, 2023, 2:12 a.m. UTC | #4

On Thu, Jan 19, 2023 at 08:16:52AM +0000, Ki-Seok Jo wrote:

> > > > +	if (!(sma1303->amp_power_status)) {
> > > > +		dev_info(component->dev, "%s : %s\n",
> > > > +			__func__, "Already AMP Shutdown");
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	cancel_delayed_work_sync(&sma1303->check_fault_work);
> > > > +
> > > > +	msleep(55);

> > > That sleep looks odd - what are we delaying after?  

> > It need for IC(Amp) issue.

> Right, but what is the issue?  It's not clear what event we're delaying for so it's not clear it'll work properly.

This device requires a delay from mute to power off. If it is turned off while the signal is coming out, it takes some time to become muted. (need to about 50ms). So, this delay is required to turn off the power after completely muting. If the time is too long, we can reduce the delay a bit.

> > > > +static void sma1303_check_fault_worker(struct work_struct *work) {
> > > > +	struct sma1303_priv *sma1303 =
> > > > +		container_of(work, struct sma1303_priv, check_fault_work.work);
> > > > +	int ret = 0;
> > > > +	unsigned int over_temp, ocp_val, uvlo_val;
> > > > +
> > > > +	mutex_lock(&sma1303->lock);

> > > It looks like this mutex is only taken in this function, is it needed?

> > This function is in workqueue. So, I think it can be done at the same time. 

> A given work_struct should only be schedulable once.

Oh, I was wrong. I should remove this. After receiving feedback on the previously sent V3 or if there is no problem, I will include this in V4 and send it. Thanks!

Mark Brown Jan. 25, 2023, 11:46 a.m. UTC | #5

On Wed, Jan 25, 2023 at 02:12:58AM +0000, Ki-Seok Jo wrote:
> On Thu, Jan 19, 2023 at 08:16:52AM +0000, Ki-Seok Jo wrote:

> > > > > +	cancel_delayed_work_sync(&sma1303->check_fault_work);

> > > > > +	msleep(55);

> > > > That sleep looks odd - what are we delaying after?  

> > > It need for IC(Amp) issue.

> > Right, but what is the issue?  It's not clear what event
> > we're delaying for so it's not clear it'll work properly.

> This device requires a delay from mute to power off. If it is
> turned off while the signal is coming out, it takes some time
> to become muted. (need to about 50ms). So, this delay is
> required to turn off the power after completely muting. If the
> time is too long, we can reduce the delay a bit.

This at the very least needs a comment since it's not clear how
someone would work that out from the code, there's no connection
here to the mute operation so someone might just remove the
delay.  It may even be that this is happening well over 55ms
after the mute happened.  The ideal thing would be to track the
time from the last mute, the regulator core does something along
those lines with off_on_delay.

Please fix your mail client to word wrap within paragraphs at something
substantially less than 80 columns.  Doing this makes your messages much
easier to read and reply to.

Ki-Seok Jo Jan. 26, 2023, 1:28 a.m. UTC | #6

> > > > > > +	cancel_delayed_work_sync(&sma1303->check_fault_work);
> 
> > > > > > +	msleep(55);
> 
> > > > > That sleep looks odd - what are we delaying after?
> 
> > > > It need for IC(Amp) issue.
> 
> > > Right, but what is the issue?  It's not clear what event we're
> > > delaying for so it's not clear it'll work properly.
> 
> > This device requires a delay from mute to power off. If it is turned
> > off while the signal is coming out, it takes some time to become
> > muted. (need to about 50ms). So, this delay is required to turn off
> > the power after completely muting. If the time is too long, we can
> > reduce the delay a bit.
> 
> This at the very least needs a comment since it's not clear how someone
> would work that out from the code, there's no connection here to the mute
> operation so someone might just remove the delay.  It may even be that this
> is happening well over 55ms after the mute happened.  The ideal thing would
> be to track the time from the last mute, the regulator core does something
> along those lines with off_on_delay.

Currently mute control is registered in mute_stream function in dai operations. After that, amp shutdown is performed in DAPM PRE_PMD. Since a 55 ms delay was required in the meantime, it seems correct to change the position of the delay like you said. I will also include a comment about delay. Please reply if there is any problem.

> Please fix your mail client to word wrap within paragraphs at something
> substantially less than 80 columns.  Doing this makes your messages much
> easier to read and reply to.

Thanks, I fixed the mail setting.

Mark Brown Jan. 26, 2023, 1:34 a.m. UTC | #7

On Thu, Jan 26, 2023 at 01:28:32AM +0000, Ki-Seok Jo wrote:

> > This at the very least needs a comment since it's not clear how someone
> > would work that out from the code, there's no connection here to the mute
> > operation so someone might just remove the delay.  It may even be that this
> > is happening well over 55ms after the mute happened.  The ideal thing would
> > be to track the time from the last mute, the regulator core does something
> > along those lines with off_on_delay.

> Currently mute control is registered in mute_stream function in
> dai operations. After that, amp shutdown is performed in DAPM
> PRE_PMD. Since a 55 ms delay was required in the meantime, it
> seems correct to change the position of the delay like you
> said. I will also include a comment about delay. Please reply
> if there is any problem.

I think that sounds fine.

> > Please fix your mail client to word wrap within paragraphs at something
> > substantially less than 80 columns.  Doing this makes your messages much
> > easier to read and reply to.

> Thanks, I fixed the mail setting.

Seems not to have worked (at least for the text version) :/

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 0f9d71490075..83d2981a400e 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -206,6 +206,7 @@  config SND_SOC_ALL_CODECS
 	imply SND_SOC_SI476X
 	imply SND_SOC_SIMPLE_AMPLIFIER
 	imply SND_SOC_SIMPLE_MUX
+	imply SND_SOC_SMA1303
 	imply SND_SOC_SPDIF
 	imply SND_SOC_SRC4XXX_I2C
 	imply SND_SOC_SSM2305
@@ -1492,6 +1493,12 @@  config SND_SOC_SIMPLE_MUX
 	tristate "Simple Audio Mux"
 	depends on GPIOLIB
 
+config SND_SOC_SMA1303
+	tristate "Iron Device SMA1303 Audio Amplifier"
+	depends on I2C
+	help
+	  Enable support for Iron Device SMA1303 Boosted Class-D amplifier
+
 config SND_SOC_SPDIF
 	tristate "S/PDIF CODEC"
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 71d3ce5867e4..89ffd06e9290 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -233,6 +233,7 @@  snd-soc-sigmadsp-objs := sigmadsp.o
 snd-soc-sigmadsp-i2c-objs := sigmadsp-i2c.o
 snd-soc-sigmadsp-regmap-objs := sigmadsp-regmap.o
 snd-soc-si476x-objs := si476x.o
+snd-soc-sma1303-objs := sma1303.o
 snd-soc-spdif-tx-objs := spdif_transmitter.o
 snd-soc-spdif-rx-objs := spdif_receiver.o
 snd-soc-src4xxx-objs := src4xxx.o
@@ -588,6 +589,7 @@  obj-$(CONFIG_SND_SOC_SIGMADSP)	+= snd-soc-sigmadsp.o
 obj-$(CONFIG_SND_SOC_SIGMADSP_I2C)	+= snd-soc-sigmadsp-i2c.o
 obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP)	+= snd-soc-sigmadsp-regmap.o
 obj-$(CONFIG_SND_SOC_SI476X)	+= snd-soc-si476x.o
+obj-$(CONFIG_SND_SOC_SMA1303)	+= snd-soc-sma1303.o
 obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif-rx.o snd-soc-spdif-tx.o
 obj-$(CONFIG_SND_SOC_SRC4XXX)	+= snd-soc-src4xxx.o
 obj-$(CONFIG_SND_SOC_SRC4XXX_I2C)	+= snd-soc-src4xxx-i2c.o
diff --git a/sound/soc/codecs/sma1303.c b/sound/soc/codecs/sma1303.c
new file mode 100644
index 000000000000..4b6d8b083340
--- /dev/null
+++ b/sound/soc/codecs/sma1303.c
@@ -0,0 +1,1746 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// sma1303.c -- sma1303 ALSA SoC Audio driver
+//
+// Copyright 2023 Iron Device Corporation
+//
+// Auther: Gyuhwa Park <[e-mail]>
+//         Kiseok Jo <[e-mail]>
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <asm/div64.h>
+
+#include "sma1303.h"
+
+#define CHECK_PERIOD_TIME 1 /* sec per HZ */
+#define MAX_CONTROL_NAME 48
+
+#define PLL_MATCH(_input_clk_name, _output_clk_name, _input_clk,\
+		_post_n, _n, _vco,  _p_cp)\
+{\
+	.input_clk_name		= _input_clk_name,\
+	.output_clk_name	= _output_clk_name,\
+	.input_clk		= _input_clk,\
+	.post_n			= _post_n,\
+	.n			= _n,\
+	.vco			= _vco,\
+	.p_cp		= _p_cp,\
+}
+
+enum sma1303_type {
+	SMA1303,
+};
+
+struct callback_ops gCallback;
+
+struct sma1303_pll_match {
+	char *input_clk_name;
+	char *output_clk_name;
+	unsigned int input_clk;
+	unsigned int post_n;
+	unsigned int n;
+	unsigned int vco;
+	unsigned int p_cp;
+};
+
+struct sma1303_priv {
+	enum sma1303_type devtype;
+	struct attribute_group *attr_grp;
+	struct delayed_work check_fault_work;
+	struct device *dev;
+	struct kobject *kobj;
+	struct mutex lock;
+	struct regmap *regmap;
+	struct sma1303_pll_match *pll_matches;
+	bool amp_power_status;
+	bool force_mute_status;
+	int num_of_pll_matches;
+	int retry_cnt;
+	unsigned int amp_mode;
+	unsigned int cur_vol;
+	unsigned int format;
+	unsigned int frame_size;
+	unsigned int init_vol;
+	unsigned int last_bclk;
+	unsigned int last_ocp_val;
+	unsigned int last_over_temp;
+	unsigned int rev_num;
+	unsigned int sys_clk_id;
+	unsigned int tdm_slot_rx;
+	unsigned int tdm_slot_tx;
+	unsigned int tsdw_cnt;
+	long check_fault_period;
+	long check_fault_status;
+};
+
+static struct snd_kcontrol_new *sma1303_controls;
+
+static struct sma1303_pll_match sma1303_pll_matches[] = {
+PLL_MATCH("1.411MHz",  "24.595MHz", 1411200,  0x07, 0xF4, 0x8B, 0x03),
+PLL_MATCH("1.536MHz",  "24.576MHz", 1536000,  0x07, 0xE0, 0x8B, 0x03),
+PLL_MATCH("3.072MHz",  "24.576MHz", 3072000,  0x07, 0x70, 0x8B, 0x03),
+PLL_MATCH("6.144MHz",  "24.576MHz", 6144000,  0x07, 0x70, 0x8B, 0x07),
+PLL_MATCH("12.288MHz", "24.576MHz", 12288000, 0x07, 0x70, 0x8B, 0x0B),
+PLL_MATCH("19.2MHz",   "24.343MHz", 19200000, 0x07, 0x47, 0x8B, 0x0A),
+PLL_MATCH("24.576MHz", "24.576MHz", 24576000, 0x07, 0x70, 0x8B, 0x0F),
+};
+
+static int sma1303_startup(struct snd_soc_component *);
+static int sma1303_shutdown(struct snd_soc_component *);
+
+static const struct reg_default sma1303_reg_def[] = {
+	{ 0x00, 0x80 },
+	{ 0x01, 0x00 },
+	{ 0x02, 0x00 },
+	{ 0x03, 0x11 },
+	{ 0x04, 0x17 },
+	{ 0x09, 0x00 },
+	{ 0x0A, 0x31 },
+	{ 0x0B, 0x98 },
+	{ 0x0C, 0x84 },
+	{ 0x0D, 0x07 },
+	{ 0x0E, 0x3F },
+	{ 0x10, 0x00 },
+	{ 0x11, 0x00 },
+	{ 0x12, 0x00 },
+	{ 0x14, 0x5C },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x0F },
+	{ 0x17, 0x0F },
+	{ 0x18, 0x0F },
+	{ 0x19, 0x00 },
+	{ 0x1A, 0x00 },
+	{ 0x1B, 0x00 },
+	{ 0x23, 0x19 },
+	{ 0x24, 0x00 },
+	{ 0x25, 0x00 },
+	{ 0x26, 0x04 },
+	{ 0x33, 0x00 },
+	{ 0x36, 0x92 },
+	{ 0x37, 0x27 },
+	{ 0x3B, 0x5A },
+	{ 0x3C, 0x20 },
+	{ 0x3D, 0x00 },
+	{ 0x3E, 0x03 },
+	{ 0x3F, 0x0C },
+	{ 0x8B, 0x07 },
+	{ 0x8C, 0x70 },
+	{ 0x8D, 0x8B },
+	{ 0x8E, 0x6F },
+	{ 0x8F, 0x03 },
+	{ 0x90, 0x26 },
+	{ 0x91, 0x42 },
+	{ 0x92, 0xE0 },
+	{ 0x94, 0x35 },
+	{ 0x95, 0x0C },
+	{ 0x96, 0x42 },
+	{ 0x97, 0x95 },
+	{ 0xA0, 0x00 },
+	{ 0xA1, 0x3B },
+	{ 0xA2, 0xC8 },
+	{ 0xA3, 0x28 },
+	{ 0xA4, 0x40 },
+	{ 0xA5, 0x01 },
+	{ 0xA6, 0x41 },
+	{ 0xA7, 0x00 },
+};
+
+static bool sma1303_readable_register(struct device *dev, unsigned int reg)
+{
+	bool result;
+
+	if (reg > SMA1303_FF_DEVICE_INDEX)
+		return false;
+
+	switch (reg) {
+	case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4:
+	case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL:
+	case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3:
+	case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7:
+	case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4:
+	case SMA1303_33_SDM_CTRL ... SMA1303_34_OTP_DATA1:
+	case SMA1303_36_PROTECTION  ... SMA1303_38_OTP_TRM0:
+	case SMA1303_3B_TEST1  ... SMA1303_3F_ATEST2:
+	case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL:
+	case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4:
+	case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON:
+	case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2:
+		result = true;
+		break;
+	case SMA1303_FF_DEVICE_INDEX:
+		result = true;
+		break;
+	default:
+		result = false;
+	}
+	return result;
+}
+
+static bool sma1303_writeable_register(struct device *dev, unsigned int reg)
+{
+	bool result;
+
+	if (reg > SMA1303_FF_DEVICE_INDEX)
+		return false;
+
+	switch (reg) {
+	case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4:
+	case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL:
+	case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3:
+	case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7:
+	case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4:
+	case SMA1303_33_SDM_CTRL:
+	case SMA1303_36_PROTECTION  ... SMA1303_37_SLOPE_CTRL:
+	case SMA1303_3B_TEST1  ... SMA1303_3F_ATEST2:
+	case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL:
+	case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4:
+	case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON:
+		result = true;
+		break;
+	default:
+		result = false;
+	}
+	return result;
+}
+
+static bool sma1303_volatile_register(struct device *dev, unsigned int reg)
+{
+	bool result;
+
+	switch (reg) {
+	case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2:
+		result = true;
+		break;
+	case SMA1303_FF_DEVICE_INDEX:
+		result = true;
+		break;
+	default:
+		result = false;
+	}
+	return result;
+}
+
+static const DECLARE_TLV_DB_SCALE(sma1303_spk_tlv, -6000, 50, 0);
+
+void sma1303_set_callback_func(struct callback_ops ops)
+{
+	if (ops.set_i2c_err)
+		gCallback.set_i2c_err = ops.set_i2c_err;
+}
+EXPORT_SYMBOL(sma1303_set_callback_func);
+
+static int sma1303_regmap_write(struct sma1303_priv *sma1303,
+				unsigned int reg, unsigned int val)
+{
+	int ret = 0;
+	int cnt = sma1303->retry_cnt;
+
+	while (cnt--) {
+		ret = regmap_write(sma1303->regmap, reg, val);
+		if (ret < 0) {
+			dev_err(sma1303->dev,
+					"Failed to write [0x%02X]\n", reg);
+			if (gCallback.set_i2c_err)
+				gCallback.set_i2c_err(sma1303->dev, ret);
+		} else
+			break;
+	}
+	return ret;
+}
+
+static int sma1303_regmap_update_bits(struct sma1303_priv *sma1303,
+		unsigned int reg, unsigned int mask, unsigned int val)
+{
+	int ret = 0;
+	int cnt = sma1303->retry_cnt;
+
+	while (cnt--) {
+		ret = regmap_update_bits(sma1303->regmap, reg, mask, val);
+		if (ret < 0) {
+			dev_err(sma1303->dev,
+					"Failed to update [0x%02X]\n", reg);
+			if (gCallback.set_i2c_err)
+				gCallback.set_i2c_err(sma1303->dev, ret);
+		} else
+			break;
+	}
+	return ret;
+}
+
+static int sma1303_regmap_read(struct sma1303_priv *sma1303,
+			unsigned int reg, unsigned int *val)
+{
+	int ret = 0;
+	int cnt = sma1303->retry_cnt;
+
+	while (cnt--) {
+		ret = regmap_read(sma1303->regmap, reg, val);
+		if (ret < 0) {
+			dev_err(sma1303->dev,
+					"Failed to read [0x%02X]\n", reg);
+			if (gCallback.set_i2c_err)
+				gCallback.set_i2c_err(sma1303->dev, ret);
+		} else
+			break;
+	}
+	return ret;
+}
+
+static const char * const sma1303_aif_in_source_text[] = {
+	"Mono", "Left", "Right"};
+static const char * const sma1303_aif_out_source_text[] = {
+	"Disable", "After_FmtC", "After_Mixer", "After_DSP", "After_Post",
+		"Clk_PLL", "Clk_OSC"};
+
+static const struct soc_enum sma1303_aif_in_source_enum =
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_aif_in_source_text),
+			sma1303_aif_in_source_text);
+static const struct soc_enum sma1303_aif_out_source_enum =
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_aif_out_source_text),
+			sma1303_aif_out_source_text);
+
+static int sma1303_force_mute_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = (int)sma1303->force_mute_status;
+	dev_info(sma1303->dev, "%s : Force Mute %s\n", __func__,
+			sma1303->force_mute_status ? "ON" : "OFF");
+
+	return 0;
+}
+
+static int sma1303_force_mute_put(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+
+	sma1303->force_mute_status = (bool)ucontrol->value.integer.value[0];
+	dev_info(sma1303->dev, "%s : Force Mute %s\n", __func__,
+			sma1303->force_mute_status ? "ON" : "OFF");
+
+	return 0;
+}
+
+static int sma1303_postscaler_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int val, ret;
+
+	ret = sma1303_regmap_read(sma1303, SMA1303_90_POSTSCALER, &val);
+	ucontrol->value.integer.value[0] = (val & 0x7E) >> 1;
+
+	return ret;
+}
+
+static int sma1303_postscaler_put(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret, sel = (int)ucontrol->value.integer.value[0];
+
+	ret = sma1303_regmap_update_bits(sma1303,
+			SMA1303_90_POSTSCALER, 0x70, (sel << 1));
+
+	return ret;
+}
+
+static int sma1303_startup(struct snd_soc_component *component)
+{
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	if (sma1303->amp_power_status) {
+		dev_info(component->dev, "%s : %s\n",
+			__func__, "Already AMP Power on");
+		return ret;
+	}
+
+	ret += sma1303_regmap_update_bits(sma1303, SMA1303_8E_PLL_CTRL,
+			SMA1303_PLL_PD2_MASK, SMA1303_PLL_OPERATION2);
+
+	ret += sma1303_regmap_update_bits(sma1303, SMA1303_00_SYSTEM_CTRL,
+			SMA1303_POWER_MASK, SMA1303_POWER_ON);
+
+	if (sma1303->amp_mode == SMA1303_MONO)
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_10_SYSTEM_CTRL1,
+				SMA1303_SPK_MODE_MASK,
+				SMA1303_SPK_MONO);
+	else
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_10_SYSTEM_CTRL1,
+				SMA1303_SPK_MODE_MASK,
+				SMA1303_SPK_STEREO);
+
+	if (sma1303->check_fault_status) {
+		if (sma1303->check_fault_period > 0)
+			queue_delayed_work(system_freezable_wq,
+				&sma1303->check_fault_work,
+					sma1303->check_fault_period * HZ);
+		else
+			queue_delayed_work(system_freezable_wq,
+				&sma1303->check_fault_work,
+					CHECK_PERIOD_TIME * HZ);
+	}
+
+	sma1303->amp_power_status = true;
+
+	return ret;
+}
+
+static int sma1303_shutdown(struct snd_soc_component *component)
+{
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	if (!(sma1303->amp_power_status)) {
+		dev_info(component->dev, "%s : %s\n",
+			__func__, "Already AMP Shutdown");
+		return ret;
+	}
+
+	cancel_delayed_work_sync(&sma1303->check_fault_work);
+
+	msleep(55);
+
+	ret += sma1303_regmap_update_bits(sma1303, SMA1303_10_SYSTEM_CTRL1,
+			SMA1303_SPK_MODE_MASK, SMA1303_SPK_OFF);
+
+	ret += sma1303_regmap_update_bits(sma1303, SMA1303_00_SYSTEM_CTRL,
+			SMA1303_POWER_MASK, SMA1303_POWER_OFF);
+
+	ret += sma1303_regmap_update_bits(sma1303, SMA1303_8E_PLL_CTRL,
+			SMA1303_PLL_PD2_MASK, SMA1303_PLL_PD2);
+
+	sma1303->amp_power_status = false;
+
+	return ret;
+}
+
+static int sma1303_aif_in_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+			snd_soc_dapm_to_component(w->dapm);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	unsigned int mux = dapm_kcontrol_get_value(w->kcontrols[0]);
+	int ret = 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		switch (mux) {
+		case 0:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_11_SYSTEM_CTRL2,
+					SMA1303_MONOMIX_MASK,
+					SMA1303_MONOMIX_ON);
+			ret += sma1303->amp_mode = SMA1303_MONO;
+			break;
+		case 1:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_11_SYSTEM_CTRL2,
+					SMA1303_MONOMIX_MASK,
+					SMA1303_MONOMIX_OFF);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_11_SYSTEM_CTRL2,
+					SMA1303_LR_DATA_SW_MASK,
+					SMA1303_LR_DATA_SW_NORMAL);
+			ret += sma1303->amp_mode = SMA1303_STEREO;
+			break;
+		case 2:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_11_SYSTEM_CTRL2,
+					SMA1303_MONOMIX_MASK,
+					SMA1303_MONOMIX_OFF);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_11_SYSTEM_CTRL2,
+					SMA1303_LR_DATA_SW_MASK,
+					SMA1303_LR_DATA_SW_NORMAL);
+			sma1303->amp_mode = SMA1303_STEREO;
+			break;
+		default:
+			dev_err(sma1303->dev, "%s : Invald value (%d)\n",
+								__func__, mux);
+			return -EINVAL;
+		}
+
+		dev_info(sma1303->dev, "%s : Source : %s\n", __func__,
+					sma1303_aif_in_source_text[mux]);
+		break;
+	}
+	return ret;
+}
+
+static int sma1303_aif_out_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+			snd_soc_dapm_to_component(w->dapm);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	unsigned int mux = dapm_kcontrol_get_value(w->kcontrols[0]);
+	int ret = 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		switch (mux) {
+		case 0:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_TEST_CLKO_EN_MASK,
+					SMA1303_NORMAL_SDO);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_09_OUTPUT_CTRL,
+					SMA1303_PORT_OUT_SEL_MASK,
+					SMA1303_OUT_SEL_DISABLE);
+			break;
+		case 1:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_TEST_CLKO_EN_MASK,
+					SMA1303_NORMAL_SDO);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_09_OUTPUT_CTRL,
+					SMA1303_PORT_OUT_SEL_MASK,
+					SMA1303_FORMAT_CONVERTER);
+			break;
+		case 2:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_TEST_CLKO_EN_MASK,
+					SMA1303_NORMAL_SDO);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_09_OUTPUT_CTRL,
+					SMA1303_PORT_OUT_SEL_MASK,
+					SMA1303_MIXER_OUTPUT);
+			break;
+		case 3:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_TEST_CLKO_EN_MASK,
+					SMA1303_NORMAL_SDO);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_09_OUTPUT_CTRL,
+					SMA1303_PORT_OUT_SEL_MASK,
+					SMA1303_SPEAKER_PATH);
+			break;
+		case 4:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_TEST_CLKO_EN_MASK,
+					SMA1303_NORMAL_SDO);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_09_OUTPUT_CTRL,
+					SMA1303_PORT_OUT_SEL_MASK,
+					SMA1303_POSTSCALER_OUTPUT);
+			break;
+		case 5:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_TEST_CLKO_EN_MASK,
+					SMA1303_CLK_OUT_SDO);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_MON_OSC_PLL_MASK,
+					SMA1303_PLL_SDO);
+			break;
+		case 6:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_TEST_CLKO_EN_MASK,
+					SMA1303_CLK_OUT_SDO);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A3_TOP_MAN2,
+					SMA1303_MON_OSC_PLL_MASK,
+					SMA1303_OSC_SDO);
+			break;
+		default:
+			dev_err(sma1303->dev, "%s : Invald value (%d)\n",
+								__func__, mux);
+			return -EINVAL;
+		}
+
+		dev_info(sma1303->dev, "%s : Source : %s\n", __func__,
+					sma1303_aif_out_source_text[mux]);
+		break;
+	}
+	return ret;
+}
+
+static int sma1303_sdo_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		dev_info(sma1303->dev,
+			"%s : SND_SOC_DAPM_PRE_PMU\n", __func__);
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_09_OUTPUT_CTRL,
+				SMA1303_PORT_CONFIG_MASK,
+				SMA1303_OUTPUT_PORT_ENABLE);
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A3_TOP_MAN2,
+				SMA1303_SDO_OUTPUT_MASK,
+				SMA1303_NORMAL_OUT);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		dev_info(sma1303->dev,
+			"%s : SND_SOC_DAPM_POST_PMD\n", __func__);
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_09_OUTPUT_CTRL,
+				SMA1303_PORT_CONFIG_MASK,
+				SMA1303_INPUT_PORT_ONLY);
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A3_TOP_MAN2,
+				SMA1303_SDO_OUTPUT_MASK,
+				SMA1303_HIGH_Z_OUT);
+		break;
+	}
+	return ret;
+}
+
+static int sma1303_post_scaler_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		dev_info(sma1303->dev,
+				"%s : SND_SOC_DAPM_PRE_PMU\n", __func__);
+		sma1303_regmap_update_bits(sma1303,
+				SMA1303_90_POSTSCALER,
+				SMA1303_BYP_POST_MASK,
+				SMA1303_EN_POST_SCALER);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		dev_info(sma1303->dev,
+				"%s : SND_SOC_DAPM_POST_PMD\n", __func__);
+		sma1303_regmap_update_bits(sma1303,
+				SMA1303_90_POSTSCALER,
+				SMA1303_BYP_POST_MASK,
+				SMA1303_BYP_POST_SCALER);
+		break;
+	}
+	return 0;
+}
+
+static int sma1303_power_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		dev_info(sma1303->dev,
+			"%s : SND_SOC_DAPM_POST_PMU\n", __func__);
+		ret = sma1303_startup(component);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		dev_info(sma1303->dev,
+			"%s : SND_SOC_DAPM_PRE_PMD\n", __func__);
+		ret = sma1303_shutdown(component);
+		break;
+	}
+	return ret;
+}
+
+static const struct snd_kcontrol_new sma1303_aif_in_source_control =
+	SOC_DAPM_ENUM("AIF IN Source", sma1303_aif_in_source_enum);
+static const struct snd_kcontrol_new sma1303_aif_out_source_control =
+	SOC_DAPM_ENUM("AIF OUT Source", sma1303_aif_out_source_enum);
+static const struct snd_kcontrol_new sma1303_sdo_control =
+	SOC_DAPM_SINGLE_VIRT("Switch", 1);
+static const struct snd_kcontrol_new sma1303_post_scaler_control =
+	SOC_DAPM_SINGLE_VIRT("Switch", 1);
+static const struct snd_kcontrol_new sma1303_enable_control =
+	SOC_DAPM_SINGLE_VIRT("Switch", 1);
+
+static const struct snd_kcontrol_new sma1303_snd_controls[] = {
+	SOC_SINGLE_TLV("Speaker Volume", SMA1303_0A_SPK_VOL,
+		0, 167, 1, sma1303_spk_tlv),
+	SOC_SINGLE_BOOL_EXT("Force Mute", 0,
+		sma1303_force_mute_get, sma1303_force_mute_put),
+	SOC_SINGLE_EXT("Postscaler Gain", SMA1303_90_POSTSCALER, 1, 0x30, 0,
+		sma1303_postscaler_get, sma1303_postscaler_put),
+};
+
+static const struct snd_soc_dapm_widget sma1303_dapm_widgets[] = {
+	/* platform domain */
+	SND_SOC_DAPM_OUTPUT("SPK"),
+	SND_SOC_DAPM_INPUT("SDO"),
+
+	/* path domain */
+	SND_SOC_DAPM_MUX_E("AIF IN Source", SND_SOC_NOPM, 0, 0,
+			&sma1303_aif_in_source_control,
+			sma1303_aif_in_event,
+			SND_SOC_DAPM_PRE_PMU),
+	SND_SOC_DAPM_MUX_E("AIF OUT Source", SND_SOC_NOPM, 0, 0,
+			&sma1303_aif_out_source_control,
+			sma1303_aif_out_event,
+			SND_SOC_DAPM_PRE_PMU),
+	SND_SOC_DAPM_SWITCH_E("SDO Enable", SND_SOC_NOPM, 0, 0,
+			&sma1303_sdo_control,
+			sma1303_sdo_event,
+			SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_MIXER("Entry", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_SWITCH_E("Post Scaler", SND_SOC_NOPM, 0, 1,
+			&sma1303_post_scaler_control,
+			sma1303_post_scaler_event,
+			SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_OUT_DRV_E("AMP Power", SND_SOC_NOPM, 0, 0, NULL, 0,
+			sma1303_power_event,
+			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_SWITCH("AMP Enable", SND_SOC_NOPM, 0, 1,
+			&sma1303_enable_control),
+
+	/* stream domain */
+	SND_SOC_DAPM_AIF_IN("AIF IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("AIF OUT", "Capture", 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route sma1303_audio_map[] = {
+	/* Playback */
+	{"AIF IN Source", "Mono", "AIF IN"},
+	{"AIF IN Source", "Left", "AIF IN"},
+	{"AIF IN Source", "Right", "AIF IN"},
+
+	{"SDO Enable", "Switch", "AIF IN"},
+	{"AIF OUT Source", "Disable", "SDO Enable"},
+	{"AIF OUT Source", "After_FmtC", "SDO Enable"},
+	{"AIF OUT Source", "After_Mixer", "SDO Enable"},
+	{"AIF OUT Source", "After_DSP", "SDO Enable"},
+	{"AIF OUT Source", "After_Post", "SDO Enable"},
+	{"AIF OUT Source", "Clk_PLL", "SDO Enable"},
+	{"AIF OUT Source", "Clk_OSC", "SDO Enable"},
+
+	{"Entry", NULL, "AIF OUT Source"},
+	{"Entry", NULL, "AIF IN Source"},
+
+	{"Post Scaler", "Switch", "Entry"},
+	{"AMP Power", NULL, "Entry"},
+	{"AMP Power", NULL, "Entry"},
+
+	{"AMP Enable", "Switch", "AMP Power"},
+	{"SPK", NULL, "AMP Enable"},
+
+	/* Capture */
+	{"AIF OUT", NULL, "AMP Enable"},
+};
+
+static int sma1303_add_component_controls(struct snd_soc_component *component)
+{
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	unsigned char **name;
+	int index, ret = 0, size, apply = 0;
+
+	sma1303_controls = devm_kzalloc(sma1303->dev,
+			sizeof(sma1303_snd_controls), GFP_KERNEL);
+	name = devm_kzalloc(sma1303->dev, ARRAY_SIZE(sma1303_snd_controls),
+			GFP_KERNEL);
+
+	for (index = 0; index < ARRAY_SIZE(sma1303_snd_controls); index++) {
+		sma1303_controls[index] = sma1303_snd_controls[index];
+		name[index] = devm_kzalloc(sma1303->dev,
+				MAX_CONTROL_NAME, GFP_KERNEL);
+		size = strlen(sma1303_snd_controls[index].name)
+			+ strlen(sma1303->dev->driver->name);
+		if (!name[index] || size > MAX_CONTROL_NAME) {
+			sma1303_controls[index].name =
+				sma1303_snd_controls[index].name;
+		} else {
+			scnprintf(name[index], MAX_CONTROL_NAME, "%s %s",
+				sma1303->dev->driver->name,
+				sma1303_snd_controls[index].name);
+			sma1303_controls[index].name = name[index];
+			apply++;
+		}
+	}
+
+	ret = snd_soc_add_component_controls(component,
+			sma1303_controls, ARRAY_SIZE(sma1303_snd_controls));
+
+	dev_info(sma1303->dev,
+			"%s : prefix=\"%s\", total_num=%d, apply_num=%d\n",
+			__func__, sma1303->dev->driver->name,
+			(int)ARRAY_SIZE(sma1303_snd_controls), apply);
+
+	return ret;
+
+}
+
+static int sma1303_setup_pll(struct snd_soc_component *component,
+		unsigned int bclk)
+{
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+
+	int i = 0, ret = 0;
+
+	dev_info(component->dev, "%s : BCLK = %dHz\n",
+		__func__, bclk);
+
+	if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK) {
+		dev_info(component->dev, "%s : MCLK is not supported\n",
+		__func__);
+	} else if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK) {
+		for (i = 0; i < sma1303->num_of_pll_matches; i++) {
+			if (sma1303->pll_matches[i].input_clk == bclk)
+				break;
+		}
+		if (i == sma1303->num_of_pll_matches) {
+			dev_info(component->dev, "%s : No matching value between pll table and SCK\n",
+					__func__);
+			return -EINVAL;
+		}
+
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A2_TOP_MAN1,
+				SMA1303_PLL_PD_MASK|SMA1303_PLL_REF_CLK_MASK,
+				SMA1303_PLL_OPERATION|SMA1303_PLL_SCK);
+	}
+
+	ret += sma1303_regmap_write(sma1303,
+			SMA1303_8B_PLL_POST_N,
+			sma1303->pll_matches[i].post_n);
+
+	ret += sma1303_regmap_write(sma1303,
+			SMA1303_8C_PLL_N,
+			sma1303->pll_matches[i].n);
+
+	ret += sma1303_regmap_write(sma1303,
+			SMA1303_8D_PLL_A_SETTING,
+			sma1303->pll_matches[i].vco);
+
+	ret += sma1303_regmap_write(sma1303,
+			SMA1303_8F_PLL_P_CP,
+			sma1303->pll_matches[i].p_cp);
+
+	return ret;
+}
+
+static int sma1303_dai_hw_params_amp(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	unsigned int bclk = 0;
+	int ret = 0;
+
+	if (sma1303->format == SND_SOC_DAIFMT_DSP_A)
+		bclk = params_rate(params) * sma1303->frame_size;
+	else
+		bclk = params_rate(params) * params_physical_width(params)
+			* params_channels(params);
+
+	dev_info(component->dev,
+			"%s : rate = %d : bit size = %d : channel = %d\n",
+			__func__, params_rate(params), params_width(params),
+			params_channels(params));
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+
+		if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK
+			|| sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK) {
+
+			if (sma1303->last_bclk != bclk) {
+				sma1303_setup_pll(component, bclk);
+				sma1303->last_bclk = bclk;
+			}
+		}
+
+		switch (params_rate(params)) {
+		case 8000:
+		case 12000:
+		case 16000:
+		case 24000:
+		case 32000:
+		case 44100:
+		case 48000:
+		case 96000:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A2_TOP_MAN1,
+					SMA1303_DAC_DN_CONV_MASK,
+					SMA1303_DAC_DN_CONV_DISABLE);
+
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_01_INPUT1_CTRL1,
+					SMA1303_LEFTPOL_MASK,
+					SMA1303_LOW_FIRST_CH);
+			break;
+
+		case 192000:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A2_TOP_MAN1,
+					SMA1303_DAC_DN_CONV_MASK,
+					SMA1303_DAC_DN_CONV_ENABLE);
+
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_01_INPUT1_CTRL1,
+					SMA1303_LEFTPOL_MASK,
+					SMA1303_HIGH_FIRST_CH);
+			break;
+
+		default:
+			dev_err(component->dev, "%s not support rate : %d\n",
+				__func__, params_rate(params));
+
+			return -EINVAL;
+		}
+
+	} else {
+
+		switch (params_format(params)) {
+
+		case SNDRV_PCM_FORMAT_S16_LE:
+			dev_info(component->dev,
+				"%s set format SNDRV_PCM_FORMAT_S16_LE\n",
+				__func__);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A4_TOP_MAN3,
+					SMA1303_SCK_RATE_MASK,
+					SMA1303_SCK_32FS);
+			break;
+
+		case SNDRV_PCM_FORMAT_S24_LE:
+			dev_info(component->dev,
+				"%s set format SNDRV_PCM_FORMAT_S24_LE\n",
+				__func__);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A4_TOP_MAN3,
+					SMA1303_SCK_RATE_MASK,
+					SMA1303_SCK_64FS);
+			break;
+		case SNDRV_PCM_FORMAT_S32_LE:
+			dev_info(component->dev,
+				"%s set format SNDRV_PCM_FORMAT_S32_LE\n",
+				__func__);
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A4_TOP_MAN3,
+					SMA1303_SCK_RATE_MASK,
+					SMA1303_SCK_64FS);
+			break;
+		default:
+			dev_err(component->dev,
+				"%s not support data bit : %d\n", __func__,
+						params_format(params));
+			return -EINVAL;
+		}
+	}
+
+	switch (sma1303->format) {
+	case SND_SOC_DAIFMT_I2S:
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_I2S_MODE_MASK,
+				SMA1303_STANDARD_I2S);
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A4_TOP_MAN3,
+				SMA1303_O_FORMAT_MASK,
+				SMA1303_O_FMT_I2S);
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_I2S_MODE_MASK,
+				SMA1303_LJ);
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A4_TOP_MAN3,
+				SMA1303_O_FORMAT_MASK,
+				SMA1303_O_FMT_LJ);
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		switch (params_width(params)) {
+		case 16:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_01_INPUT1_CTRL1,
+					SMA1303_I2S_MODE_MASK,
+					SMA1303_RJ_16BIT);
+			break;
+		case 24:
+		case 32:
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_01_INPUT1_CTRL1,
+					SMA1303_I2S_MODE_MASK,
+					SMA1303_RJ_24BIT);
+			break;
+		}
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_I2S_MODE_MASK,
+				SMA1303_STANDARD_I2S);
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A4_TOP_MAN3,
+				SMA1303_O_FORMAT_MASK,
+				SMA1303_O_FMT_TDM);
+		break;
+	}
+
+	switch (params_width(params)) {
+	case 16:
+	case 24:
+	case 32:
+		break;
+	default:
+		dev_err(component->dev,
+			"%s not support data bit : %d\n", __func__,
+					params_format(params));
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int sma1303_dai_set_sysclk_amp(struct snd_soc_dai *dai,
+				int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_component *component = dai->component;
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+
+	switch (clk_id) {
+	case SMA1303_EXTERNAL_CLOCK_19_2:
+		break;
+	case SMA1303_EXTERNAL_CLOCK_24_576:
+		break;
+	case SMA1303_PLL_CLKIN_MCLK:
+		break;
+	case SMA1303_PLL_CLKIN_BCLK:
+		break;
+	default:
+		dev_err(component->dev, "Invalid clk id: %d\n", clk_id);
+		return -EINVAL;
+	}
+	sma1303->sys_clk_id = clk_id;
+	return 0;
+}
+
+static int sma1303_dai_mute(struct snd_soc_dai *dai, int mute, int stream)
+{
+	struct snd_soc_component *component = dai->component;
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	if (stream == SNDRV_PCM_STREAM_CAPTURE)
+		return ret;
+
+	if (!(sma1303->amp_power_status)) {
+		dev_info(component->dev, "%s : %s\n",
+			__func__, "Already AMP Shutdown");
+		return ret;
+	}
+
+	if (mute) {
+		dev_info(component->dev, "%s : %s\n", __func__, "MUTE");
+
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_0E_MUTE_VOL_CTRL,
+				SMA1303_SPK_MUTE_MASK,
+				SMA1303_SPK_MUTE);
+	} else {
+		if (!sma1303->force_mute_status) {
+			dev_info(component->dev, "%s : %s\n",
+					__func__, "UNMUTE");
+			ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_0E_MUTE_VOL_CTRL,
+					SMA1303_SPK_MUTE_MASK,
+					SMA1303_SPK_UNMUTE);
+		} else {
+			dev_info(sma1303->dev,
+					"%s : FORCE MUTE!!!\n", __func__);
+		}
+	}
+
+	return ret;
+}
+
+static int sma1303_dai_set_fmt_amp(struct snd_soc_dai *dai,
+					unsigned int fmt)
+{
+	struct snd_soc_component *component  = dai->component;
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+
+	case SND_SOC_DAIFMT_CBS_CFS:
+		dev_info(component->dev,
+				"%s : %s\n", __func__, "I2S/TDM Device mode");
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_CONTROLLER_DEVICE_MASK,
+				SMA1303_DEVICE_MODE);
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFM:
+		dev_info(component->dev,
+			"%s : %s\n", __func__, "I2S/TDM Controller mode");
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_CONTROLLER_DEVICE_MASK,
+				SMA1303_CONTROLLER_MODE);
+		break;
+
+	default:
+		dev_err(component->dev,
+			"Unsupported Controller/Device : 0x%x\n", fmt);
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		sma1303->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+		break;
+	default:
+		dev_err(component->dev,
+			"Unsupported Audio Interface Format : 0x%x\n", fmt);
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+
+	case SND_SOC_DAIFMT_IB_NF:
+		dev_info(component->dev, "%s : %s\n",
+			__func__, "Invert BCLK + Normal Frame");
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_SCK_RISING_MASK,
+				SMA1303_SCK_RISING_EDGE);
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		dev_info(component->dev, "%s : %s\n",
+			__func__, "Invert BCLK + Invert Frame");
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_LEFTPOL_MASK|SMA1303_SCK_RISING_MASK,
+				SMA1303_HIGH_FIRST_CH|SMA1303_SCK_RISING_EDGE);
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		dev_info(component->dev, "%s : %s\n",
+			__func__, "Normal BCLK + Invert Frame");
+		ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_01_INPUT1_CTRL1,
+				SMA1303_LEFTPOL_MASK,
+				SMA1303_HIGH_FIRST_CH);
+		break;
+	case SND_SOC_DAIFMT_NB_NF:
+		dev_info(component->dev, "%s : %s\n",
+			__func__, "Normal BCLK + Normal Frame");
+		break;
+	default:
+		dev_err(component->dev,
+				"Unsupported Bit & Frameclock : 0x%x\n", fmt);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int sma1303_dai_set_tdm_slot(struct snd_soc_dai *dai,
+				unsigned int tx_mask, unsigned int rx_mask,
+				int slots, int slot_width)
+{
+	struct snd_soc_component *component = dai->component;
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	int ret = 0;
+
+	dev_info(component->dev, "%s : slots = %d, slot_width - %d\n",
+			__func__, slots, slot_width);
+
+	sma1303->frame_size = slot_width * slots;
+
+	ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A4_TOP_MAN3,
+				SMA1303_O_FORMAT_MASK,
+				SMA1303_O_FMT_TDM);
+
+	switch (slot_width) {
+	case 16:
+		ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A6_TDM2,
+					SMA1303_TDM_DL_MASK,
+					SMA1303_TDM_DL_16);
+		break;
+	case 32:
+		ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A6_TDM2,
+					SMA1303_TDM_DL_MASK,
+					SMA1303_TDM_DL_32);
+		break;
+	default:
+		dev_err(component->dev, "%s not support TDM %d slot_width\n",
+					__func__, slot_width);
+	}
+
+	switch (slots) {
+	case 4:
+		ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A6_TDM2,
+					SMA1303_TDM_N_SLOT_MASK,
+					SMA1303_TDM_N_SLOT_4);
+		break;
+	case 8:
+		ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A6_TDM2,
+					SMA1303_TDM_N_SLOT_MASK,
+					SMA1303_TDM_N_SLOT_8);
+		break;
+	default:
+		dev_err(component->dev, "%s not support TDM %d slots\n",
+				__func__, slots);
+	}
+
+	if (sma1303->tdm_slot_rx < slots)
+		ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A5_TDM1,
+					SMA1303_TDM_SLOT1_RX_POS_MASK,
+					(sma1303->tdm_slot_rx) << 3);
+	else
+		dev_err(component->dev, "%s Incorrect tdm-slot-rx %d set\n",
+					__func__, sma1303->tdm_slot_rx);
+
+	ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A5_TDM1,
+				SMA1303_TDM_CLK_POL_MASK,
+				SMA1303_TDM_CLK_POL_RISE);
+
+	ret += sma1303_regmap_update_bits(sma1303,
+				SMA1303_A5_TDM1,
+				SMA1303_TDM_TX_MODE_MASK,
+				SMA1303_TDM_TX_MONO);
+
+	if (sma1303->tdm_slot_tx < slots)
+		ret += sma1303_regmap_update_bits(sma1303,
+					SMA1303_A6_TDM2,
+					SMA1303_TDM_SLOT1_TX_POS_MASK,
+					(sma1303->tdm_slot_tx) << 3);
+	else
+		dev_err(component->dev, "%s Incorrect tdm-slot-tx %d set\n",
+				__func__, sma1303->tdm_slot_tx);
+
+	return ret;
+}
+
+static const struct snd_soc_dai_ops sma1303_dai_ops_amp = {
+	.set_sysclk = sma1303_dai_set_sysclk_amp,
+	.set_fmt = sma1303_dai_set_fmt_amp,
+	.hw_params = sma1303_dai_hw_params_amp,
+	.mute_stream = sma1303_dai_mute,
+	.set_tdm_slot = sma1303_dai_set_tdm_slot,
+};
+
+#define SMA1303_RATES SNDRV_PCM_RATE_8000_192000
+#define SMA1303_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \
+		SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver sma1303_dai[] = {
+	{
+		.name = "sma1303-amplifier",
+		.id = 0,
+		.playback = {
+			.stream_name = "Playback",
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = SMA1303_RATES,
+			.formats = SMA1303_FORMATS,
+		},
+		.capture = {
+			.stream_name = "Capture",
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = SMA1303_RATES,
+			.formats = SMA1303_FORMATS,
+		},
+		.ops = &sma1303_dai_ops_amp,
+	},
+};
+
+static void sma1303_check_fault_worker(struct work_struct *work)
+{
+	struct sma1303_priv *sma1303 =
+		container_of(work, struct sma1303_priv, check_fault_work.work);
+	int ret = 0;
+	unsigned int over_temp, ocp_val, uvlo_val;
+
+	mutex_lock(&sma1303->lock);
+
+	if (sma1303->tsdw_cnt)
+		ret = sma1303_regmap_read(sma1303,
+			SMA1303_0A_SPK_VOL, &sma1303->cur_vol);
+	else
+		ret = sma1303_regmap_read(sma1303,
+			SMA1303_0A_SPK_VOL, &sma1303->init_vol);
+
+	if (ret != 0) {
+		dev_err(sma1303->dev,
+			"failed to read SMA1303_0A_SPK_VOL : %d\n", ret);
+		mutex_unlock(&sma1303->lock);
+		return;
+	}
+
+	ret = sma1303_regmap_read(sma1303, SMA1303_FA_STATUS1, &over_temp);
+	if (ret != 0) {
+		dev_err(sma1303->dev,
+			"failed to read SMA1303_FA_STATUS1 : %d\n", ret);
+		mutex_unlock(&sma1303->lock);
+		return;
+	}
+
+	ret = sma1303_regmap_read(sma1303, SMA1303_FB_STATUS2, &ocp_val);
+	if (ret != 0) {
+		dev_err(sma1303->dev,
+			"failed to read SMA1303_FB_STATUS2 : %d\n", ret);
+		mutex_unlock(&sma1303->lock);
+		return;
+	}
+
+	ret = sma1303_regmap_read(sma1303, SMA1303_FF_DEVICE_INDEX, &uvlo_val);
+	if (ret != 0) {
+		dev_err(sma1303->dev,
+			"failed to read SMA1303_FF_DEVICE_INDEX : %d\n", ret);
+		mutex_unlock(&sma1303->lock);
+		return;
+	}
+
+	if (~over_temp & SMA1303_OT1_OK_STATUS) {
+		dev_crit(sma1303->dev,
+			"%s : OT1(Over Temperature Level 1)\n", __func__);
+
+		if ((sma1303->cur_vol + 6) <= 0xFF)
+			sma1303_regmap_write(sma1303,
+				SMA1303_0A_SPK_VOL, sma1303->cur_vol + 6);
+
+		sma1303->tsdw_cnt++;
+	} else if (sma1303->tsdw_cnt) {
+		sma1303_regmap_write(sma1303,
+				SMA1303_0A_SPK_VOL, sma1303->init_vol);
+		sma1303->tsdw_cnt = 0;
+		sma1303->cur_vol = sma1303->init_vol;
+	}
+
+	if (~over_temp & SMA1303_OT2_OK_STATUS) {
+		dev_crit(sma1303->dev,
+			"%s : OT2(Over Temperature Level 2)\n", __func__);
+	}
+	if (ocp_val & SMA1303_OCP_SPK_STATUS) {
+		dev_crit(sma1303->dev,
+			"%s : OCP_SPK(Over Current Protect SPK)\n", __func__);
+	}
+	if (ocp_val & SMA1303_OCP_BST_STATUS) {
+		dev_crit(sma1303->dev,
+			"%s : OCP_BST(Over Current Protect Boost)\n", __func__);
+	}
+	if ((ocp_val & SMA1303_CLK_MON_STATUS) && (sma1303->amp_power_status)) {
+		dev_crit(sma1303->dev,
+			"%s : CLK_FAULT(No clock input)\n", __func__);
+	}
+	if (uvlo_val & SMA1303_UVLO_BST_STATUS) {
+		dev_crit(sma1303->dev,
+			"%s : UVLO(Under Voltage Lock Out)\n", __func__);
+	}
+
+	if ((over_temp != sma1303->last_over_temp) ||
+		(ocp_val != sma1303->last_ocp_val)) {
+
+		dev_crit(sma1303->dev, "Please check AMP status");
+		dev_info(sma1303->dev, "STATUS1=0x%02X : STATUS2=0x%02X\n",
+				over_temp, ocp_val);
+		sma1303->last_over_temp = over_temp;
+		sma1303->last_ocp_val = ocp_val;
+	}
+
+	if (sma1303->check_fault_status) {
+		if (sma1303->check_fault_period > 0)
+			queue_delayed_work(system_freezable_wq,
+				&sma1303->check_fault_work,
+					sma1303->check_fault_period * HZ);
+		else
+			queue_delayed_work(system_freezable_wq,
+				&sma1303->check_fault_work,
+					CHECK_PERIOD_TIME * HZ);
+	}
+
+	if (!(~over_temp & SMA1303_OT1_OK_STATUS)
+			&& !(~over_temp & SMA1303_OT2_OK_STATUS)
+			&& !(ocp_val & SMA1303_OCP_SPK_STATUS)
+			&& !(ocp_val & SMA1303_OCP_BST_STATUS)
+			&& !(ocp_val & SMA1303_CLK_MON_STATUS)
+			&& !(uvlo_val & SMA1303_UVLO_BST_STATUS)) {
+	}
+
+	mutex_unlock(&sma1303->lock);
+}
+
+static int sma1303_probe(struct snd_soc_component *component)
+{
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+	struct snd_soc_dapm_context *dapm =
+		snd_soc_component_get_dapm(component);
+	int ret = 0;
+
+	ret += sma1303_add_component_controls(component);
+
+	snd_soc_dapm_sync(dapm);
+
+	ret += sma1303_regmap_write(sma1303,
+			SMA1303_0A_SPK_VOL, sma1303->init_vol);
+
+	dev_info(component->dev,
+		"%s init_vol is 0x%x\n", __func__, sma1303->init_vol);
+
+	return ret;
+}
+
+static void sma1303_remove(struct snd_soc_component *component)
+{
+	struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component);
+
+	cancel_delayed_work_sync(&sma1303->check_fault_work);
+}
+
+static const struct snd_soc_component_driver sma1303_component = {
+	.probe = sma1303_probe,
+	.remove = sma1303_remove,
+	.dapm_widgets = sma1303_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(sma1303_dapm_widgets),
+	.dapm_routes = sma1303_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(sma1303_audio_map),
+};
+
+const struct regmap_config sma_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SMA1303_FF_DEVICE_INDEX,
+	.readable_reg = sma1303_readable_register,
+	.writeable_reg = sma1303_writeable_register,
+	.volatile_reg = sma1303_volatile_register,
+
+	.cache_type = REGCACHE_NONE,
+	.reg_defaults = sma1303_reg_def,
+	.num_reg_defaults = ARRAY_SIZE(sma1303_reg_def),
+};
+
+static ssize_t check_fault_period_show(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
+	int rc;
+
+	rc = (int)snprintf(buf, PAGE_SIZE,
+			"%ld\n", sma1303->check_fault_period);
+
+	return (ssize_t)rc;
+}
+
+static ssize_t check_fault_period_store(struct device *dev,
+	struct device_attribute *devattr, const char *buf, size_t count)
+{
+	struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = kstrtol(buf, 10, &sma1303->check_fault_period);
+
+	if (ret)
+		return -EINVAL;
+
+	return (ssize_t)count;
+}
+
+static DEVICE_ATTR_RW(check_fault_period);
+
+static ssize_t check_fault_status_show(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
+	int rc;
+
+	rc = (int)snprintf(buf, PAGE_SIZE,
+			"%ld\n", sma1303->check_fault_status);
+
+	return (ssize_t)rc;
+}
+
+static ssize_t check_fault_status_store(struct device *dev,
+	struct device_attribute *devattr, const char *buf, size_t count)
+{
+	struct sma1303_priv *sma1303 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = kstrtol(buf, 10, &sma1303->check_fault_status);
+
+	if (ret)
+		return -EINVAL;
+
+	if (sma1303->check_fault_status) {
+		if (sma1303->check_fault_period > 0)
+			queue_delayed_work(system_freezable_wq,
+				&sma1303->check_fault_work,
+					sma1303->check_fault_period * HZ);
+		else
+			queue_delayed_work(system_freezable_wq,
+				&sma1303->check_fault_work,
+					CHECK_PERIOD_TIME * HZ);
+	}
+
+	return (ssize_t)count;
+}
+
+static DEVICE_ATTR_RW(check_fault_status);
+
+static struct attribute *sma1303_attr[] = {
+	&dev_attr_check_fault_period.attr,
+	&dev_attr_check_fault_status.attr,
+	NULL,
+};
+
+static struct attribute_group sma1303_attr_group = {
+	.attrs = sma1303_attr,
+};
+
+static int sma1303_i2c_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct sma1303_priv *sma1303;
+	struct device_node *np = client->dev.of_node;
+	int ret, i = 0;
+	u32 value = 0;
+	unsigned int device_info, status, otp_stat;
+
+	sma1303 = devm_kzalloc(&client->dev,
+				sizeof(struct sma1303_priv), GFP_KERNEL);
+	if (!sma1303)
+		return -ENOMEM;
+	sma1303->dev = &client->dev;
+
+	sma1303->regmap = devm_regmap_init_i2c(client, &sma_i2c_regmap);
+	if (IS_ERR(sma1303->regmap)) {
+		ret = PTR_ERR(sma1303->regmap);
+		dev_err(&client->dev,
+			"Failed to allocate register map: %d\n", ret);
+
+		return ret;
+	}
+
+	if (np) {
+		if (!of_property_read_u32(np, "i2c-retry", &value)) {
+			if (value > 50 || value <= 0) {
+				sma1303->retry_cnt = SMA1303_I2C_RETRY_COUNT;
+				dev_info(&client->dev, "%s : %s\n", __func__,
+					"i2c-retry out of range (up to 50)");
+			} else {
+				sma1303->retry_cnt = value;
+				dev_info(&client->dev, "%s : %s = %u\n",
+					__func__, "i2c-retry count", value);
+			}
+		} else {
+			dev_info(&client->dev, "%s : %s = %d\n", __func__,
+				"i2c-retry count", SMA1303_I2C_RETRY_COUNT);
+			sma1303->retry_cnt = SMA1303_I2C_RETRY_COUNT;
+		}
+		if (!of_property_read_u32(np, "tdm-slot-rx", &value)) {
+			dev_info(&client->dev,
+				"tdm slot rx is '%d' from DT\n", value);
+			sma1303->tdm_slot_rx = value;
+		} else {
+			dev_info(&client->dev,
+				"Default setting of tdm slot rx is '0'\n");
+			sma1303->tdm_slot_rx = 0;
+		}
+		if (!of_property_read_u32(np, "tdm-slot-tx", &value)) {
+			dev_info(&client->dev,
+				"tdm slot tx is '%u' from DT\n", value);
+			sma1303->tdm_slot_tx = value;
+		} else {
+			dev_info(&client->dev,
+				"Default setting of tdm slot tx is '0'\n");
+			sma1303->tdm_slot_tx = 0;
+		}
+		if (!of_property_read_u32(np, "sys-clk-id", &value)) {
+			switch (value) {
+			case SMA1303_EXTERNAL_CLOCK_19_2:
+			case SMA1303_EXTERNAL_CLOCK_24_576:
+			case SMA1303_PLL_CLKIN_MCLK:
+				dev_info(&client->dev, "MCLK is not supported\n");
+				break;
+			case SMA1303_PLL_CLKIN_BCLK:
+				dev_info(&client->dev,
+				"Take an BCLK(SCK) and covert it to an internal PLL for use\n");
+				break;
+			default:
+				dev_err(&client->dev,
+					"Invalid sys-clk-id: %u\n", value);
+				return -EINVAL;
+			}
+			sma1303->sys_clk_id = value;
+		} else {
+			dev_info(&client->dev, "Use the internal PLL clock by default\n");
+			sma1303->sys_clk_id = SMA1303_PLL_CLKIN_BCLK;
+		}
+	} else {
+		dev_err(&client->dev,
+			"device node initialization error\n");
+		devm_kfree(&client->dev, sma1303);
+		return -ENODEV;
+	}
+
+	ret = sma1303_regmap_read(sma1303,
+			SMA1303_FF_DEVICE_INDEX, &device_info);
+
+	if ((ret != 0) || ((device_info & 0xF8) != SMA1303_DEVICE_ID)) {
+		dev_err(&client->dev, "device initialization error (%d 0x%02X)",
+				ret, device_info);
+	}
+	dev_info(&client->dev, "chip version 0x%02X\n", device_info);
+
+	ret += sma1303_regmap_update_bits(sma1303,
+			SMA1303_00_SYSTEM_CTRL,
+			SMA1303_RESETBYI2C_MASK, SMA1303_RESETBYI2C_RESET);
+
+	ret += sma1303_regmap_read(sma1303, SMA1303_FF_DEVICE_INDEX, &status);
+	sma1303->rev_num = status & SMA1303_REV_NUM_STATUS;
+	if (sma1303->rev_num == SMA1303_REV_NUM_TV0)
+		dev_info(&client->dev, "SMA1303 Trimming Version 0\n");
+	else if (sma1303->rev_num == SMA1303_REV_NUM_TV1)
+		dev_info(&client->dev, "SMA1303 Trimming Version 1\n");
+
+	ret += sma1303_regmap_read(sma1303, SMA1303_FB_STATUS2, &otp_stat);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"failed to read, register: %02X, ret: %d\n",
+				SMA1303_FF_DEVICE_INDEX, ret);
+
+	if (((sma1303->rev_num == SMA1303_REV_NUM_TV0) &&
+		((otp_stat & 0x0E) == SMA1303_OTP_STAT_OK_0)) ||
+		((sma1303->rev_num != SMA1303_REV_NUM_TV0) &&
+		((otp_stat & 0x0C) == SMA1303_OTP_STAT_OK_1)))
+		dev_info(&client->dev, "SMA1303 OTP Status Successful\n");
+	else
+		dev_info(&client->dev, "SMA1303 OTP Status Fail\n");
+
+	for (i = 0; i < (unsigned int)ARRAY_SIZE(sma1303_reg_def); i++)
+		ret += sma1303_regmap_write(sma1303,
+				sma1303_reg_def[i].reg,
+				sma1303_reg_def[i].def);
+
+	sma1303->amp_mode = SMA1303_MONO;
+	sma1303->amp_power_status = false;
+	sma1303->check_fault_period = CHECK_PERIOD_TIME;
+	sma1303->check_fault_status = true;
+	sma1303->force_mute_status = false;
+	sma1303->init_vol = 0x31;
+	sma1303->cur_vol = sma1303->init_vol;
+	sma1303->last_bclk = 0;
+	sma1303->last_ocp_val = 0x08;
+	sma1303->last_over_temp = 0xC0;
+	sma1303->tsdw_cnt = 0;
+
+	sma1303->dev = &client->dev;
+	sma1303->kobj = &client->dev.kobj;
+
+	mutex_init(&sma1303->lock);
+
+	INIT_DELAYED_WORK(&sma1303->check_fault_work,
+		sma1303_check_fault_worker);
+
+	i2c_set_clientdata(client, sma1303);
+
+	sma1303->pll_matches = sma1303_pll_matches;
+	sma1303->num_of_pll_matches =
+		ARRAY_SIZE(sma1303_pll_matches);
+
+	ret = devm_snd_soc_register_component(&client->dev,
+			&sma1303_component, sma1303_dai, 1);
+	if (ret) {
+		dev_err(&client->dev, "Failed to register component");
+
+		return ret;
+	}
+
+	sma1303->attr_grp = &sma1303_attr_group;
+	ret = sysfs_create_group(sma1303->kobj, sma1303->attr_grp);
+	if (ret) {
+		dev_err(&client->dev,
+			"failed to create attribute group [%d]\n", ret);
+		sma1303->attr_grp = NULL;
+	}
+
+	return ret;
+}
+
+static void sma1303_i2c_remove(struct i2c_client *client)
+{
+	struct sma1303_priv *sma1303 =
+		(struct sma1303_priv *) i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&sma1303->check_fault_work);
+}
+
+static const struct i2c_device_id sma1303_i2c_id[] = {
+	{"sma1303", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, sma1303_i2c_id);
+
+static const struct of_device_id sma1303_of_match[] = {
+	{ .compatible = "irondevice,sma1303", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sma1303_of_match);
+
+static struct i2c_driver sma1303_i2c_driver = {
+	.driver = {
+		.name = "sma1303",
+		.of_match_table = sma1303_of_match,
+	},
+	.probe = sma1303_i2c_probe,
+	.remove = sma1303_i2c_remove,
+	.id_table = sma1303_i2c_id,
+};
+
+module_i2c_driver(sma1303_i2c_driver);
+
+MODULE_DESCRIPTION("ALSA SoC SMA1303 driver");
+MODULE_AUTHOR("Gyuhwa Park, <[e-mail]>");
+MODULE_AUTHOR("Kiseok Jo, <[e-mail]>");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/sma1303.h b/sound/soc/codecs/sma1303.h
new file mode 100644
index 000000000000..a96c3de28d57
--- /dev/null
+++ b/sound/soc/codecs/sma1303.h
@@ -0,0 +1,616 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * sma1303.h -- sma1303 ALSA SoC Audio driver
+ *
+ * Copyright 2023 Iron Device Corporation
+ *
+ * Author: Kiseok Jo <[e-mail]>
+ *
+ */
+
+#ifndef _SMA1303_H
+#define _SMA1303_H
+
+typedef void (*callback_fptr) (void *device, int err);
+struct callback_ops {
+	callback_fptr set_i2c_err;
+};
+
+void sma1303_set_callback_func(struct callback_ops ops);
+
+#define  SMA1303_I2C_ADDR_00		0x1e
+#define  SMA1303_I2C_ADDR_01		0x3e
+#define  SMA1303_I2C_ADDR_10		0x5e
+#define  SMA1303_I2C_ADDR_11		0x7e
+
+#define  SMA1303_EXTERNAL_CLOCK_19_2	0x00
+#define  SMA1303_EXTERNAL_CLOCK_24_576	0x01
+#define  SMA1303_PLL_CLKIN_MCLK		0x02
+#define  SMA1303_PLL_CLKIN_BCLK		0x03
+
+#define  SMA1303_MONO			0x00
+#define  SMA1303_STEREO			0x01
+
+#define  SMA1303_I2C_RETRY_COUNT	3
+
+/*
+ * SMA1303 Register Definition
+ */
+
+/* SMA1303 Register Addresses */
+#define  SMA1303_00_SYSTEM_CTRL		0x00
+#define  SMA1303_01_INPUT1_CTRL1	0x01
+#define  SMA1303_02_INPUT1_CTRL2	0x02
+#define  SMA1303_03_INPUT1_CTRL3	0x03
+#define  SMA1303_04_INPUT1_CTRL4	0x04
+/* 0x05 ~ 0x08 : Reserved */
+#define  SMA1303_09_OUTPUT_CTRL		0x09
+#define  SMA1303_0A_SPK_VOL		0x0a
+#define  SMA1303_0B_BST_TEST		0x0b
+#define  SMA1303_0C_BST_TEST1		0x0c
+#define  SMA1303_0D_SPK_TEST		0x0d
+#define  SMA1303_0E_MUTE_VOL_CTRL	0x0e
+/* 0x0F : Reserved */
+#define  SMA1303_10_SYSTEM_CTRL1	0x10
+#define  SMA1303_11_SYSTEM_CTRL2	0x11
+#define  SMA1303_12_SYSTEM_CTRL3	0x12
+/* 0x13 : Reserved */
+#define  SMA1303_14_MODULATOR		0x14
+#define  SMA1303_15_BASS_SPK1		0x15
+#define  SMA1303_16_BASS_SPK2		0x16
+#define  SMA1303_17_BASS_SPK3		0x17
+#define  SMA1303_18_BASS_SPK4		0x18
+#define  SMA1303_19_BASS_SPK5		0x19
+#define  SMA1303_1A_BASS_SPK6		0x1a
+#define  SMA1303_1B_BASS_SPK7		0x1b
+/* 0x1C ~ 0x22 : Reserved */
+#define  SMA1303_23_COMP_LIM1		0x23
+#define  SMA1303_24_COMP_LIM2		0x24
+#define  SMA1303_25_COMP_LIM3		0x25
+#define  SMA1303_26_COMP_LIM4		0x26
+/* 0x27 ~ 0x32 : Reserved */
+#define  SMA1303_33_SDM_CTRL		0x33
+#define  SMA1303_34_OTP_DATA1		0x34
+/* 0x35 : Reserved */
+#define  SMA1303_36_PROTECTION		0x36
+#define  SMA1303_37_SLOPE_CTRL		0x37
+#define  SMA1303_38_OTP_TRM0		0x38
+/* 0x39 ~ 0x3A : Reserved */
+#define  SMA1303_3B_TEST1		0x3b
+#define  SMA1303_3C_TEST2		0x3c
+#define  SMA1303_3D_TEST3		0x3d
+#define  SMA1303_3E_ATEST1		0x3e
+#define  SMA1303_3F_ATEST2		0x3f
+/* 0x40 ~ 0x8A : Reserved */
+#define	 SMA1303_8B_PLL_POST_N		0x8b
+#define	 SMA1303_8C_PLL_N		0x8c
+#define	 SMA1303_8D_PLL_A_SETTING	0x8d
+#define	 SMA1303_8E_PLL_CTRL		0x8e
+#define	 SMA1303_8F_PLL_P_CP		0x8f
+#define  SMA1303_90_POSTSCALER		0x90
+#define  SMA1303_91_CLASS_G_CTRL	0x91
+#define  SMA1303_92_FDPEC_CTRL		0x92
+/* 0x93 : Reserved */
+#define  SMA1303_94_BOOST_CTRL1		0x94
+#define  SMA1303_95_BOOST_CTRL2		0x95
+#define  SMA1303_96_BOOST_CTRL3		0x96
+#define  SMA1303_97_BOOST_CTRL4		0x97
+/* 0x98 ~ 0x9F : Reserved */
+#define  SMA1303_A0_PAD_CTRL0		0xa0
+#define  SMA1303_A1_PAD_CTRL1		0xa1
+#define	 SMA1303_A2_TOP_MAN1		0xa2
+#define	 SMA1303_A3_TOP_MAN2		0xa3
+#define	 SMA1303_A4_TOP_MAN3		0xa4
+#define  SMA1303_A5_TDM1		0xa5
+#define  SMA1303_A6_TDM2		0xa6
+#define  SMA1303_A7_CLK_MON		0xa7
+/* 0xA8 ~ 0xF9 : Reserved */
+#define	 SMA1303_FA_STATUS1		0xfa
+#define	 SMA1303_FB_STATUS2		0xfb
+/* 0xFC ~ 0xFE : Reserved */
+#define	 SMA1303_FF_DEVICE_INDEX	0xff
+
+/* SMA1303 Registers Bit Fields */
+
+/* SYSTEM_CTRL : 0x00 */
+#define SMA1303_RESETBYI2C_MASK (1<<1)
+#define SMA1303_RESETBYI2C_NORMAL (0<<1)
+#define SMA1303_RESETBYI2C_RESET (1<<1)
+
+#define SMA1303_POWER_MASK (1<<0)
+#define SMA1303_POWER_OFF (0<<0)
+#define SMA1303_POWER_ON (1<<0)
+
+/* INTPUT CTRL1 : 0x01 */
+#define SMA1303_CONTROLLER_DEVICE_MASK (1<<7)
+#define SMA1303_DEVICE_MODE	(0<<7)
+#define SMA1303_CONTROLLER_MODE	(1<<7)
+
+#define SMA1303_I2S_MODE_MASK	(7<<4)
+#define SMA1303_STANDARD_I2S	(0<<4)
+#define SMA1303_LJ		(1<<4)
+#define SMA1303_RJ_16BIT	(4<<4)
+#define SMA1303_RJ_18BIT	(5<<4)
+#define SMA1303_RJ_20BIT	(6<<4)
+#define SMA1303_RJ_24BIT	(7<<4)
+
+#define SMA1303_LEFTPOL_MASK	(1<<3)
+#define SMA1303_LOW_FIRST_CH	(0<<3)
+#define SMA1303_HIGH_FIRST_CH	(1<<3)
+
+#define SMA1303_SCK_RISING_MASK	(1<<2)
+#define SMA1303_SCK_FALLING_EDGE	(0<<2)
+#define SMA1303_SCK_RISING_EDGE	(1<<2)
+
+/* INTPUT CTRL2 : 0x02 */
+#define SMA1303_IMODE_MASK (3<<6)
+#define SMA1303_I2S	(0<<6)
+#define SMA1303_PCM_SHORT (1<<6)
+#define SMA1303_PCM_LONG (2<<6)
+
+#define RSMA1303_IGHT_FIRST_MASK (1<<5)
+#define SMA1303_LEFT_NORMAL (0<<5)
+#define SMA1303_RIGHT_INVERTED (1<<5)
+
+#define SMA1303_PCM_ALAW_MASK (1<<4)
+#define SMA1303_PCM_U_DECODING (0<<4)
+#define SMA1303_PCM_A_DECODING (1<<4)
+
+#define SMA1303_PCM_COMP_MASK (1<<3)
+#define SMA1303_PCM_LINEAR (0<<3)
+#define SMA1303_PCM_COMPANDING (1<<3)
+
+#define SMA1303_INPUTSEL_MASK (1<<2)
+#define SMA1303_PCM_8KHZ (0<<2)
+#define SMA1303_PCM_16KHZ (1<<2)
+
+#define SMA1303_PCM_STEREO_MASK (1<<1)
+#define SMA1303_PCM_MONO (0<<1)
+#define SMA1303_PCM_STEREO (1<<1)
+
+#define SMA1303_PCM_DL_MASK (1<<0)
+#define SMA1303_PCM_8BIT (0<<0)
+#define SMA1303_PCM_16BIT (1<<0)
+
+/* INTPUT CTRL3 : 0x03 */
+#define SMA1303_PCM_N_SLOT_MASK (15<<0)
+#define SMA1303_PCM_N_SLOT1 (0<<0)
+#define SMA1303_PCM_N_SLOT2 (1<<0)
+#define SMA1303_PCM_N_SLOT3 (2<<0)
+#define SMA1303_PCM_N_SLOT4 (3<<0)
+#define SMA1303_PCM_N_SLOT5 (4<<0)
+#define SMA1303_PCM_N_SLOT6 (5<<0)
+#define SMA1303_PCM_N_SLOT7 (6<<0)
+#define SMA1303_PCM_N_SLOT8 (7<<0)
+#define SMA1303_PCM_N_SLOT9 (8<<0)
+#define SMA1303_PCM_N_SLOT10 (9<<0)
+#define SMA1303_PCM_N_SLOT11 (10<<0)
+#define SMA1303_PCM_N_SLOT12 (11<<0)
+#define SMA1303_PCM_N_SLOT13 (12<<0)
+#define SMA1303_PCM_N_SLOT14 (13<<0)
+#define SMA1303_PCM_N_SLOT15 (14<<0)
+#define SMA1303_PCM_N_SLOT16 (15<<0)
+
+/* INTPUT CTRL4 : 0x04 */
+#define SMA1303_PCM1_SLOT_MASK (15<<4)
+#define SMA1303_PCM1_SLOT1 (0<<4)
+#define SMA1303_PCM1_SLOT2 (1<<4)
+#define SMA1303_PCM1_SLOT3 (2<<4)
+#define SMA1303_PCM1_SLOT4 (3<<4)
+#define SMA1303_PCM1_SLOT5 (4<<4)
+#define SMA1303_PCM1_SLOT6 (5<<4)
+#define SMA1303_PCM1_SLOT7 (6<<4)
+#define SMA1303_PCM1_SLOT8 (7<<4)
+#define SMA1303_PCM1_SLOT9 (8<<4)
+#define SMA1303_PCM1_SLOT10 (9<<4)
+#define SMA1303_PCM1_SLOT11 (10<<4)
+#define SMA1303_PCM1_SLOT12 (11<<4)
+#define SMA1303_PCM1_SLOT13 (12<<4)
+#define SMA1303_PCM1_SLOT14 (13<<4)
+#define SMA1303_PCM1_SLOT15 (14<<4)
+#define SMA1303_PCM1_SLOT16 (15<<4)
+
+#define SMA1303_PCM2_SLOT_MASK (15<<0)
+#define SMA1303_PCM2_SLOT1 (0<<0)
+#define SMA1303_PCM2_SLOT2 (1<<0)
+#define SMA1303_PCM2_SLOT3 (2<<0)
+#define SMA1303_PCM2_SLOT4 (3<<0)
+#define SMA1303_PCM2_SLOT5 (4<<0)
+#define SMA1303_PCM2_SLOT6 (5<<0)
+#define SMA1303_PCM2_SLOT7 (6<<0)
+#define SMA1303_PCM2_SLOT8 (7<<0)
+#define SMA1303_PCM2_SLOT9 (8<<0)
+#define SMA1303_PCM2_SLOT10 (9<<0)
+#define SMA1303_PCM2_SLOT11 (10<<0)
+#define SMA1303_PCM2_SLOT12 (11<<0)
+#define SMA1303_PCM2_SLOT13 (12<<0)
+#define SMA1303_PCM2_SLOT14 (13<<0)
+#define SMA1303_PCM2_SLOT15 (14<<0)
+#define SMA1303_PCM2_SLOT16 (15<<0)
+
+/* OUTPUT CTRL : 0x09 */
+#define SMA1303_PORT_CONFIG_MASK (3<<5)
+#define SMA1303_INPUT_PORT_ONLY (0<<5)
+#define SMA1303_OUTPUT_PORT_ENABLE (2<<5)
+
+#define SMA1303_PORT_OUT_SEL_MASK (7<<0)
+#define SMA1303_OUT_SEL_DISABLE (0<<0)
+#define SMA1303_FORMAT_CONVERTER (1<<0)
+#define SMA1303_MIXER_OUTPUT (2<<0)
+#define SMA1303_SPEAKER_PATH (3<<0)
+#define SMA1303_POSTSCALER_OUTPUT (4<<0)
+
+/* BST_TEST : 0x0B */
+#define SMA1303_BST_OFF_SLOPE_MASK (3<<6)
+#define SMA1303_BST_OFF_SLOPE_6_7ns (0<<6)
+#define SMA1303_BST_OFF_SLOPE_4_8ns (1<<6)
+#define SMA1303_BST_OFF_SLOPE_2_6ns (2<<6)
+#define SMA1303_BST_OFF_SLOPE_1_2ns (3<<6)
+
+#define SMA1303_OCP_TEST_MASK (1<<5)
+#define SMA1303_OCP_NORMAL_MODE (0<<5)
+#define SMA1303_OCP_TEST_MODE (1<<5)
+
+#define SMA1303_BST_FAST_LEBN_MASK (1<<4)
+#define SMA1303_BST_SHORT_LEB (0<<4)
+#define SMA1303_BST_LONG_LEB (1<<4)
+
+#define SMA1303_HIGH_PGAIN_MASK (1<<3)
+#define SMA1303_NORMAL_P_GAIN (0<<3)
+#define SMA1303_HIGH_P_GAIN (1<<3)
+
+#define SMA1303_VCOMP_MASK (1<<2)
+#define SMA1303_VCOMP_NORMAL_MODE (0<<2)
+#define SMA1303_VCOMP_V_MON_MODE (1<<2)
+
+#define SMA1303_PMOS_ON_MASK (1<<1)
+#define SMA1303_PMOS_NORMAL_MODE (0<<1)
+#define SMA1303_PMOS_TEST_MODE (1<<1)
+
+#define SMA1303_NMOS_ON_MASK (1<<0)
+#define SMA1303_NMOS_NORMAL_MODE (0<<0)
+#define SMA1303_NMOS_TEST_MODE (1<<0)
+
+/* BST_TEST1 : 0x0C */
+#define SMA1303_SET_OCP_H_MASK (3<<6)
+#define SMA1303_HIGH_OCP_4_5_LVL (0<<6)
+#define SMA1303_HIGH_OCP_3_2_LVL (1<<6)
+#define SMA1303_HIGH_OCP_2_1_LVL (2<<6)
+#define SMA1303_HIGH_OCP_0_9_LVL (3<<6)
+
+#define SMA1303_OCL_TEST_MASK (1<<5)
+#define SMA1303_OCL_NORMAL_MODE (0<<5)
+#define SMA1303_OCL_TEST_MODE (1<<5)
+
+#define SMA1303_LOOP_CHECK_MASK (1<<4)
+#define SMA1303_BST_LOOP_NORMAL_MODE (0<<4)
+#define SMA1303_BST_LOOP_CHECK_MODE (1<<4)
+
+#define SMA1303_EN_SH_PRT_MASK (1<<3)
+#define SMA1303_EN_SH_PRT_DISABLE (0<<3)
+#define SMA1303_EN_SH_PRT_ENABLE (1<<3)
+
+/* SPK_TEST : 0x0D */
+#define SMA1303_VREF_MON_MASK (1<<3)
+#define SMA1303_VREF_NORMAL_MODE (0<<3)
+#define SMA1303_VREF_V_MON_MODE (1<<3)
+
+#define SMA1303_SPK_OCP_DLYN_MASK (1<<2)
+#define SMA1303_SPK_OCP_LONG_DELAY (0<<2)
+#define SMA1303_SPK_OCP_NORMAL (1<<2)
+
+#define SMA1303_SPK_OFF_SLOPE_MASK (3<<0)
+#define SMA1303_SPK_OFF_SLOPE_SLOW (0<<0)
+#define SMA1303_SPK_OFF_SLOPE_FAST (3<<0)
+
+/* MUTE_VOL_CTRL : 0x0E */
+#define SMA1303_VOL_SLOPE_MASK (3<<6)
+#define SMA1303_VOL_SLOPE_OFF (0<<6)
+#define SMA1303_VOL_SLOPE_SLOW (1<<6)
+#define SMA1303_VOL_SLOPE_MID (2<<6)
+#define SMA1303_VOL_SLOPE_FAST (3<<6)
+
+#define SMA1303_MUTE_SLOPE_MASK (3<<4)
+#define SMA1303_MUTE_SLOPE_OFF (0<<4)
+#define SMA1303_MUTE_SLOPE_SLOW (1<<4)
+#define SMA1303_MUTE_SLOPE_MID (2<<4)
+#define SMA1303_MUTE_SLOPE_FAST (3<<4)
+
+#define SMA1303_SPK_MUTE_MASK (1<<0)
+#define SMA1303_SPK_UNMUTE (0<<0)
+#define SMA1303_SPK_MUTE (1<<0)
+
+/* SYSTEM_CTRL1 :0x10 */
+#define SMA1303_SPK_MODE_MASK (7<<2)
+#define SMA1303_SPK_OFF (0<<2)
+#define SMA1303_SPK_MONO (1<<2)
+#define SMA1303_SPK_STEREO (4<<2)
+
+/* SYSTEM_CTRL2 : 0x11 */
+#define SMA1303_SPK_BS_MASK (1<<6)
+#define SMA1303_SPK_BS_BYP (0<<6)
+#define SMA1303_SPK_BS_EN (1<<6)
+#define SMA1303_SPK_LIM_MASK (1<<5)
+#define SMA1303_SPK_LIM_BYP (0<<5)
+#define SMA1303_SPK_LIM_EN (1<<5)
+
+#define SMA1303_LR_DATA_SW_MASK (1<<4)
+#define SMA1303_LR_DATA_SW_NORMAL (0<<4)
+#define SMA1303_LR_DATA_SW_SWAP (1<<4)
+
+#define SMA1303_MONOMIX_MASK (1<<0)
+#define SMA1303_MONOMIX_OFF (0<<0)
+#define SMA1303_MONOMIX_ON (1<<0)
+
+/* SYSTEM_CTRL3 : 0x12 */
+#define SMA1303_INPUT_MASK (3<<6)
+#define SMA1303_INPUT_0_DB (0<<6)
+#define SMA1303_INPUT_M6_DB (1<<6)
+#define SMA1303_INPUT_M12_DB (2<<6)
+#define SMA1303_INPUT_INFI_DB (3<<6)
+#define SMA1303_INPUT_R_MASK (3<<4)
+#define SMA1303_INPUT_R_0_DB (0<<4)
+#define SMA1303_INPUT_R_M6_DB (1<<4)
+#define SMA1303_INPUT_R_M12_DB (2<<4)
+#define SMA1303_INPUT_R_INFI_DB (3<<4)
+
+/* Modulator : 0x14 */
+#define SMA1303_SPK_HYSFB_MASK (3<<6)
+#define SMA1303_HYSFB_625K (0<<6)
+#define SMA1303_HYSFB_414K (1<<6)
+#define SMA1303_HYSFB_297K (2<<6)
+#define SMA1303_HYSFB_226K (3<<6)
+#define SMA1303_SPK_BDELAY_MASK (63<<0)
+
+/* SDM CONTROL : 0x33 */
+#define SMA1303_SDM_Q_SEL_MASK (1<<2)
+#define SMA1303_QUART_SEL_1_DIV_4 (0<<2)
+#define SMA1303_QUART_SEL_1_DIV_8 (1<<2)
+
+/* OTP_DATA1 : 0x34 */
+#define SMA1303_OTP_LVL_MASK (1<<5)
+#define SMA1303_OTP_LVL_NORMAL (0<<5)
+#define SMA1303_OTP_LVL_LOW (1<<5)
+
+/* PROTECTION : 0x36 */
+#define SMA1303_EDGE_DIS_MASK (1<<7)
+#define SMA1303_EDGE_DIS_ENABLE (0<<7)
+#define SMA1303_EDGE_DIS_DISABLE (1<<7)
+
+#define SMA1303_SPK_OCP_DIS_MASK (1<<3)
+#define SMA1303_SPK_OCP_ENABLE (0<<3)
+#define SMA1303_SPK_OCP_DISABLE (1<<3)
+
+#define SMA1303_OCP_MODE_MASK (1<<2)
+#define SMA1303_AUTO_RECOVER (0<<2)
+#define SMA1303_SHUT_DOWN_PERMANENT (1<<2)
+
+#define SMA1303_OTP_MODE_MASK (3<<0)
+#define SMA1303_OTP_MODE_DISABLE (0<<0)
+#define SMA1303_IG_THR1_SHUT_THR2 (1<<0)
+#define SMA1303_REC_THR1_SHUT_THR2 (2<<0)
+#define SMA1303_SHUT_THR1_SHUT_THR2 (3<<0)
+
+/* TEST2 : 0x3C */
+#define SMA1303_SPK_HSDM_BP_MASK (1<<4)
+#define SMA1303_SPK_HSDM_ENABLE (0<<4)
+#define SMA1303_SPK_HSDM_BYPASS (1<<4)
+
+#define SMA1303_SDM_SYNC_DIS_MASK (1<<5)
+#define SMA1303_SDM_SYNC_NORMAL (0<<5)
+#define SMA1303_SDM_SYNC_DISABLE (1<<5)
+
+/* ATEST2 : 0x3F */
+#define SMA1303_SPK_OUT_FREQ_MASK (1<<2)
+#define SMA1303_SPK_OUT_FREQ_360K (0<<2)
+#define SMA1303_SPK_OUT_FREQ_410K (1<<2)
+
+#define SMA1303_LOW_POWER_MODE_MASK (1<<3)
+#define SMA1303_LOW_POWER_MODE_DISABLE (0<<3)
+#define SMA1303_LOW_POWER_MODE_ENABLE (1<<3)
+
+#define SMA1303_THERMAL_ADJUST_MASK (3<<5)
+#define SMA1303_THERMAL_150_110 (0<<5)
+#define SMA1303_THERMAL_160_120 (1<<5)
+#define SMA1303_THERMAL_140_100 (2<<5)
+
+#define SMA1303_FAST_OFF_DRIVE_SPK_MASK (1<<0)
+#define SMA1303_FAST_OFF_DRIVE_SPK_DISABLE (0<<0)
+#define SMA1303_FAST_OFF_DRIVE_SPK_ENABLE (1<<0)
+
+/* PLL_CTRL : 0x8E */
+#define SMA1303_TRM_LVL_MASK (1<<4)
+#define SMA1303_TRM_LVL_NORMAL (0<<4)
+#define SMA1303_TRM_LVL_LOW (1<<4)
+
+#define SMA1303_LOW_OCL_MODE_MASK (1<<3)
+#define SMA1303_LOW_OCL_MODE (0<<3)
+#define SMA1303_NORMAL_OCL_MODE (1<<3)
+
+#define SMA1303_PLL_PD2_MASK (7<<0)
+#define SMA1303_PLL_PD2 (7<<0)
+#define SMA1303_PLL_OPERATION2 (0<<0)
+
+/* POSTSCALER : 0x90 */
+#define SMA1303_BYP_POST_MASK (1<<0)
+#define SMA1303_EN_POST_SCALER (0<<0)
+#define SMA1303_BYP_POST_SCALER (1<<0)
+
+/* FDPEC CONTROL : 0x92 */
+#define SMA1303_FLT_VDD_GAIN_MASK (15<<4)
+#define SMA1303_FLT_VDD_GAIN_2P40 (0<<4)
+#define SMA1303_FLT_VDD_GAIN_2P45 (1<<4)
+#define SMA1303_FLT_VDD_GAIN_2P50 (2<<4)
+#define SMA1303_FLT_VDD_GAIN_2P55 (3<<4)
+#define SMA1303_FLT_VDD_GAIN_2P60 (4<<4)
+#define SMA1303_FLT_VDD_GAIN_2P65 (5<<4)
+#define SMA1303_FLT_VDD_GAIN_2P70 (6<<4)
+#define SMA1303_FLT_VDD_GAIN_2P75 (7<<4)
+#define SMA1303_FLT_VDD_GAIN_2P80 (8<<4)
+#define SMA1303_FLT_VDD_GAIN_2P85 (9<<4)
+#define SMA1303_FLT_VDD_GAIN_2P90 (10<<4)
+#define SMA1303_FLT_VDD_GAIN_2P95 (11<<4)
+#define SMA1303_FLT_VDD_GAIN_3P00 (12<<4)
+#define SMA1303_FLT_VDD_GAIN_3P05 (13<<4)
+#define SMA1303_FLT_VDD_GAIN_3P10 (14<<4)
+#define SMA1303_FLT_VDD_GAIN_3P15 (15<<4)
+
+#define SMA1303_DIS_FCHG_MASK (1<<2)
+#define SMA1303_EN_FAST_CHARGE (0<<2)
+#define SMA1303_DIS_FAST_CHARGE (1<<2)
+
+/* BOOST_CONTROL4 : 0x97 */
+#define SMA1303_TRM_VBST_MASK (7<<2)
+#define SMA1303_TRM_VBST_5P5 (0<<2)
+#define SMA1303_TRM_VBST_5P6 (1<<2)
+#define SMA1303_TRM_VBST_5P7 (2<<2)
+#define SMA1303_TRM_VBST_5P8 (3<<2)
+#define SMA1303_TRM_VBST_5P9 (4<<2)
+#define SMA1303_TRM_VBST_6P0 (5<<2)
+#define SMA1303_TRM_VBST_6P1 (6<<2)
+#define SMA1303_TRM_VBST_6P2 (7<<2)
+
+/* TOP_MAN1 : 0xA2 */
+#define SMA1303_PLL_LOCK_SKIP_MASK (1<<7)
+#define SMA1303_PLL_LOCK_ENABLE (0<<7)
+#define SMA1303_PLL_LOCK_DISABLE (1<<7)
+
+#define SMA1303_PLL_PD_MASK (1<<6)
+#define SMA1303_PLL_OPERATION (0<<6)
+#define SMA1303_PLL_PD (1<<6)
+
+#define SMA1303_PLL_DIV_MASK (3<<4)
+#define SMA1303_PLL_OUT (0<<4)
+#define SMA1303_PLL_OUT_2 (1<<4)
+#define SMA1303_PLL_OUT_4 (2<<4)
+#define SMA1303_PLL_OUT_8 (3<<4)
+
+#define SMA1303_PLL_REF_CLK_MASK (1<<3)
+#define SMA1303_PLL_REF_CLK1 (0<<3)
+#define SMA1303_PLL_SCK (1<<3)
+
+#define SMA1303_DAC_DN_CONV_MASK (1<<2)
+#define SMA1303_DAC_DN_CONV_DISABLE (0<<2)
+#define SMA1303_DAC_DN_CONV_ENABLE (1<<2)
+
+#define SMA1303_SDO_IO_MASK (1<<1)
+#define SMA1303_HIGH_Z_LRCK_H (0<<1)
+#define SMA1303_HIGH_Z_LRCK_L (1<<1)
+
+#define SMA1303_SDO_OUTPUT2_MASK (1<<0)
+#define SMA1303_SDO_NORMAL (0<<0)
+#define SMA1303_SDO_OUTPUT_ONLY (1<<0)
+
+/* TOP_MAN2 : 0xA3 */
+#define SMA1303_MON_OSC_PLL_MASK (1<<7)
+#define SMA1303_PLL_SDO (0<<7)
+#define SMA1303_OSC_SDO (1<<7)
+
+#define SMA1303_TEST_CLKO_EN_MASK (1<<6)
+#define SMA1303_NORMAL_SDO (0<<6)
+#define SMA1303_CLK_OUT_SDO (1<<6)
+
+#define SMA1303_SDO_OUTPUT_MASK (1<<3)
+#define SMA1303_NORMAL_OUT (0<<3)
+#define SMA1303_HIGH_Z_OUT (1<<3)
+
+#define SMA1303_CLOCK_MON_MASK (1<<1)
+#define SMA1303_CLOCK_MON (0<<1)
+#define SMA1303_CLOCK_NOT_MON (1<<1)
+
+#define SMA1303_OSC_PD_MASK (1<<0)
+#define SMA1303_NORMAL_OPERATION_OSC (0<<0)
+#define SMA1303_POWER_DOWN_OSC (1<<0)
+
+/* TOP_MAN3 0xA4 */
+#define SMA1303_O_FORMAT_MASK (7<<5)
+#define SMA1303_O_FMT_LJ (1<<5)
+#define SMA1303_O_FMT_I2S (2<<5)
+#define SMA1303_O_FMT_TDM (4<<5)
+
+#define SMA1303_SCK_RATE_MASK (1<<3)
+#define SMA1303_SCK_64FS (0<<3)
+#define SMA1303_SCK_32FS (2<<3)
+
+#define SMA1303_LRCK_POL_MASK (1<<0)
+#define SMA1303_L_VALID (0<<0)
+#define SMA1303_R_VALID (1<<0)
+
+/* TDM1 FORMAT : 0xA5 */
+#define SMA1303_TDM_CLK_POL_MASK (1<<7)
+#define SMA1303_TDM_CLK_POL_RISE (0<<7)
+#define SMA1303_TDM_CLK_POL_FALL (1<<7)
+
+#define SMA1303_TDM_TX_MODE_MASK (1<<6)
+#define SMA1303_TDM_TX_MONO (0<<6)
+#define SMA1303_TDM_TX_STEREO (1<<6)
+
+#define SMA1303_TDM_SLOT1_RX_POS_MASK (7<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_0 (0<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_1 (1<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_2 (2<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_3 (3<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_4 (4<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_5 (5<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_6 (6<<3)
+#define SMA1303_TDM_SLOT1_RX_POS_7 (7<<3)
+
+#define SMA1303_TDM_SLOT2_RX_POS_MASK (7<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_0 (0<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_1 (1<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_2 (2<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_3 (3<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_4 (4<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_5 (5<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_6 (6<<0)
+#define SMA1303_TDM_SLOT2_RX_POS_7 (7<<0)
+
+/* TDM2 FORMAT : 0xA6 */
+#define SMA1303_TDM_DL_MASK (1<<7)
+#define SMA1303_TDM_DL_16 (0<<7)
+#define SMA1303_TDM_DL_32 (1<<7)
+
+#define SMA1303_TDM_N_SLOT_MASK (1<<6)
+#define SMA1303_TDM_N_SLOT_4 (0<<6)
+#define SMA1303_TDM_N_SLOT_8 (1<<6)
+
+#define SMA1303_TDM_SLOT1_TX_POS_MASK (7<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_0 (0<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_1 (1<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_2 (2<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_3 (3<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_4 (4<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_5 (5<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_6 (6<<3)
+#define SMA1303_TDM_SLOT1_TX_POS_7 (7<<3)
+
+#define SMA1303_TDM_SLOT2_TX_POS_MASK (7<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_0 (0<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_1 (1<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_2 (2<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_3 (3<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_4 (4<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_5 (5<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_6 (6<<0)
+#define SMA1303_TDM_SLOT2_TX_POS_7 (7<<0)
+
+/* STATUS1 : 0xFA */
+#define SMA1303_OT1_OK_STATUS (1<<7)
+#define SMA1303_OT2_OK_STATUS (1<<6)
+
+/* STATUS2 : 0xFB */
+#define SMA1303_OCP_SPK_STATUS (1<<5)
+#define SMA1303_OCP_BST_STATUS (1<<4)
+#define SMA1303_OTP_STAT_OK_0 (5<<1)
+#define SMA1303_OTP_STAT_OK_1 (2<<2)
+
+#define SMA1303_CLK_MON_STATUS (1<<0)
+
+/* DEVICE_INFO : 0xFF */
+#define SMA1303_DEVICE_ID (2<<3)
+#define SMA1303_UVLO_BST_STATUS (1<<2)
+#define SMA1303_REV_NUM_STATUS (3<<0)
+#define SMA1303_REV_NUM_TV0 (0<<0)
+#define SMA1303_REV_NUM_TV1 (1<<0)
+
+#endif