| Message ID | 20230125185910.962733-1-ardb@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: head: Switch endianness before populating the ID map | expand |
On Wed, 25 Jan 2023 at 19:59, Ard Biesheuvel <ardb@kernel.org> wrote: > > Ensure that the endianness used for populating the ID map matches the > endianness that the running kernel will be using, as this is no longer > guaranteed now that create_idmap() is invoked before init_kernel_el(). > > Note that doing so is only safe if the MMU is off, as switching the > endianness with the MMU on results in the active ID map to become > invalid. So also clear the C and M bits when toggling the EE bit in not the C bit - I ripped that out at the last minute > SCTLR, and mark the MMU as disabled at boot. > > Note that the same issue has resulted in preserve_boot_args() recording > the contents of registers X0 ... X3 in the wrong byte order, although > this is arguably a very minor concern. > > Fixes: 32b135a7fafe ("arm64: head: avoid cache invalidation when entering with the MMU on") > Reported-by: Nathan Chancellor <nathan@kernel.org> > Signed-off-by: Ard Biesheuvel <ardb@kernel.org> > --- > arch/arm64/include/asm/sysreg.h | 3 ++- > arch/arm64/kernel/head.S | 23 ++++++++++++++++++++++- > 2 files changed, 24 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h > index 1312fb48f18b5a51..2facd7933948677a 100644 > --- a/arch/arm64/include/asm/sysreg.h > +++ b/arch/arm64/include/asm/sysreg.h > @@ -575,6 +575,7 @@ > #define SCTLR_ELx_DSSBS (BIT(44)) > #define SCTLR_ELx_ATA (BIT(43)) > > +#define SCTLR_ELx_EE_SHIFT 25 > #define SCTLR_ELx_ENIA_SHIFT 31 > > #define SCTLR_ELx_ITFSB (BIT(37)) > @@ -583,7 +584,7 @@ > #define SCTLR_ELx_LSMAOE (BIT(29)) > #define SCTLR_ELx_nTLSMD (BIT(28)) > #define SCTLR_ELx_ENDA (BIT(27)) > -#define SCTLR_ELx_EE (BIT(25)) > +#define SCTLR_ELx_EE (BIT(SCTLR_ELx_EE_SHIFT)) > #define SCTLR_ELx_EIS (BIT(22)) > #define SCTLR_ELx_IESB (BIT(21)) > #define SCTLR_ELx_TSCXT (BIT(20)) > diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S > index dc56e1d8f36eb387..107a2b87577c9b0e 100644 > --- a/arch/arm64/kernel/head.S > +++ b/arch/arm64/kernel/head.S > @@ -129,10 +129,31 @@ SYM_CODE_START_LOCAL(record_mmu_state) > mrs x19, sctlr_el1 > b.ne 0f > mrs x19, sctlr_el2 > -0: tst x19, #SCTLR_ELx_C // Z := (C == 0) > +0: > +CPU_LE( tbnz x19, #SCTLR_ELx_EE_SHIFT, 1f ) > +CPU_BE( tbz x19, #SCTLR_ELx_EE_SHIFT, 1f ) > + tst x19, #SCTLR_ELx_C // Z := (C == 0) > and x19, x19, #SCTLR_ELx_M // isolate M bit > csel x19, xzr, x19, eq // clear x19 if Z > ret > + > + /* > + * Set the correct endianness early so all memory accesses issued > + * before init_kernel_el() occur in the correct byte order. Note that > + * this means the MMU must be disabled, or the active ID map will end > + * up getting interpreted with the wrong byte order. > + */ > +1: eor x19, x19, #SCTLR_ELx_EE > + bic x19, x19, #SCTLR_ELx_M > + b.ne 2f > + pre_disable_mmu_workaround > + msr sctlr_el2, x19 > + b 3f > + pre_disable_mmu_workaround > +2: msr sctlr_el1, x19 > +3: isb > + mov x19, xzr > + ret > SYM_CODE_END(record_mmu_state) > > /* > -- > 2.39.0 >
On Wed, Jan 25, 2023 at 07:59:10PM +0100, Ard Biesheuvel wrote: > Ensure that the endianness used for populating the ID map matches the > endianness that the running kernel will be using, as this is no longer > guaranteed now that create_idmap() is invoked before init_kernel_el(). > > Note that doing so is only safe if the MMU is off, as switching the > endianness with the MMU on results in the active ID map to become > invalid. So also clear the C and M bits when toggling the EE bit in > SCTLR, and mark the MMU as disabled at boot. > > Note that the same issue has resulted in preserve_boot_args() recording > the contents of registers X0 ... X3 in the wrong byte order, although > this is arguably a very minor concern. > > Fixes: 32b135a7fafe ("arm64: head: avoid cache invalidation when entering with the MMU on") > Reported-by: Nathan Chancellor <nathan@kernel.org> > Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Thanks a lot for the quick fix! > --- > arch/arm64/include/asm/sysreg.h | 3 ++- > arch/arm64/kernel/head.S | 23 ++++++++++++++++++++++- > 2 files changed, 24 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h > index 1312fb48f18b5a51..2facd7933948677a 100644 > --- a/arch/arm64/include/asm/sysreg.h > +++ b/arch/arm64/include/asm/sysreg.h > @@ -575,6 +575,7 @@ > #define SCTLR_ELx_DSSBS (BIT(44)) > #define SCTLR_ELx_ATA (BIT(43)) > > +#define SCTLR_ELx_EE_SHIFT 25 > #define SCTLR_ELx_ENIA_SHIFT 31 > > #define SCTLR_ELx_ITFSB (BIT(37)) > @@ -583,7 +584,7 @@ > #define SCTLR_ELx_LSMAOE (BIT(29)) > #define SCTLR_ELx_nTLSMD (BIT(28)) > #define SCTLR_ELx_ENDA (BIT(27)) > -#define SCTLR_ELx_EE (BIT(25)) > +#define SCTLR_ELx_EE (BIT(SCTLR_ELx_EE_SHIFT)) > #define SCTLR_ELx_EIS (BIT(22)) > #define SCTLR_ELx_IESB (BIT(21)) > #define SCTLR_ELx_TSCXT (BIT(20)) > diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S > index dc56e1d8f36eb387..107a2b87577c9b0e 100644 > --- a/arch/arm64/kernel/head.S > +++ b/arch/arm64/kernel/head.S > @@ -129,10 +129,31 @@ SYM_CODE_START_LOCAL(record_mmu_state) > mrs x19, sctlr_el1 > b.ne 0f > mrs x19, sctlr_el2 > -0: tst x19, #SCTLR_ELx_C // Z := (C == 0) > +0: > +CPU_LE( tbnz x19, #SCTLR_ELx_EE_SHIFT, 1f ) > +CPU_BE( tbz x19, #SCTLR_ELx_EE_SHIFT, 1f ) > + tst x19, #SCTLR_ELx_C // Z := (C == 0) > and x19, x19, #SCTLR_ELx_M // isolate M bit > csel x19, xzr, x19, eq // clear x19 if Z > ret > + > + /* > + * Set the correct endianness early so all memory accesses issued > + * before init_kernel_el() occur in the correct byte order. Note that > + * this means the MMU must be disabled, or the active ID map will end > + * up getting interpreted with the wrong byte order. > + */ > +1: eor x19, x19, #SCTLR_ELx_EE > + bic x19, x19, #SCTLR_ELx_M > + b.ne 2f > + pre_disable_mmu_workaround > + msr sctlr_el2, x19 > + b 3f > + pre_disable_mmu_workaround > +2: msr sctlr_el1, x19 > +3: isb > + mov x19, xzr > + ret > SYM_CODE_END(record_mmu_state) > > /* > -- > 2.39.0 >
On Wed, 25 Jan 2023 19:59:10 +0100, Ard Biesheuvel wrote: > Ensure that the endianness used for populating the ID map matches the > endianness that the running kernel will be using, as this is no longer > guaranteed now that create_idmap() is invoked before init_kernel_el(). > > Note that doing so is only safe if the MMU is off, as switching the > endianness with the MMU on results in the active ID map to become > invalid. So also clear the C and M bits when toggling the EE bit in > SCTLR, and mark the MMU as disabled at boot. > > [...] Applied to arm64 (for-next/efi-boot-mmu-on), thanks! [1/1] arm64: head: Switch endianness before populating the ID map https://git.kernel.org/arm64/c/2ced0f30a426
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 1312fb48f18b5a51..2facd7933948677a 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -575,6 +575,7 @@ #define SCTLR_ELx_DSSBS (BIT(44)) #define SCTLR_ELx_ATA (BIT(43)) +#define SCTLR_ELx_EE_SHIFT 25 #define SCTLR_ELx_ENIA_SHIFT 31 #define SCTLR_ELx_ITFSB (BIT(37)) @@ -583,7 +584,7 @@ #define SCTLR_ELx_LSMAOE (BIT(29)) #define SCTLR_ELx_nTLSMD (BIT(28)) #define SCTLR_ELx_ENDA (BIT(27)) -#define SCTLR_ELx_EE (BIT(25)) +#define SCTLR_ELx_EE (BIT(SCTLR_ELx_EE_SHIFT)) #define SCTLR_ELx_EIS (BIT(22)) #define SCTLR_ELx_IESB (BIT(21)) #define SCTLR_ELx_TSCXT (BIT(20)) diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index dc56e1d8f36eb387..107a2b87577c9b0e 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -129,10 +129,31 @@ SYM_CODE_START_LOCAL(record_mmu_state) mrs x19, sctlr_el1 b.ne 0f mrs x19, sctlr_el2 -0: tst x19, #SCTLR_ELx_C // Z := (C == 0) +0: +CPU_LE( tbnz x19, #SCTLR_ELx_EE_SHIFT, 1f ) +CPU_BE( tbz x19, #SCTLR_ELx_EE_SHIFT, 1f ) + tst x19, #SCTLR_ELx_C // Z := (C == 0) and x19, x19, #SCTLR_ELx_M // isolate M bit csel x19, xzr, x19, eq // clear x19 if Z ret + + /* + * Set the correct endianness early so all memory accesses issued + * before init_kernel_el() occur in the correct byte order. Note that + * this means the MMU must be disabled, or the active ID map will end + * up getting interpreted with the wrong byte order. + */ +1: eor x19, x19, #SCTLR_ELx_EE + bic x19, x19, #SCTLR_ELx_M + b.ne 2f + pre_disable_mmu_workaround + msr sctlr_el2, x19 + b 3f + pre_disable_mmu_workaround +2: msr sctlr_el1, x19 +3: isb + mov x19, xzr + ret SYM_CODE_END(record_mmu_state) /*
Ensure that the endianness used for populating the ID map matches the endianness that the running kernel will be using, as this is no longer guaranteed now that create_idmap() is invoked before init_kernel_el(). Note that doing so is only safe if the MMU is off, as switching the endianness with the MMU on results in the active ID map to become invalid. So also clear the C and M bits when toggling the EE bit in SCTLR, and mark the MMU as disabled at boot. Note that the same issue has resulted in preserve_boot_args() recording the contents of registers X0 ... X3 in the wrong byte order, although this is arguably a very minor concern. Fixes: 32b135a7fafe ("arm64: head: avoid cache invalidation when entering with the MMU on") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> --- arch/arm64/include/asm/sysreg.h | 3 ++- arch/arm64/kernel/head.S | 23 ++++++++++++++++++++++- 2 files changed, 24 insertions(+), 2 deletions(-)