| Message ID | 20230128173843.765212-2-masahiroy@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] kbuild: add a script to generate a list of files ignored by git | expand |
On Sat, Jan 28, 2023 at 6:40 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > If you run 'make deb-pkg', all objects are lost due to 'make clean', > which makes the incremental builds impossible. > > Instead of cleaning, pass the exclude list to tar's --exclude-from > option. > > Previously, *.diff.gz contained some check-in files such as > .clang-format, .cocciconfig. > > With this commit, *.diff.gz will only contain the .config and debian/. > The other source files will go into the tarball. > Thanks for the patch. While at this... ...why not switch over to Debian's packaging default XZ compressor: *.orig.xz and *.diff.xz (or *.debian.tar.xz)? EXAMPLE binutils: DSC: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40-2.dsc TAR: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40.orig.tar.xz DIFF: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40-2.debian.tar.xz -Sedat- [1] https://packages.debian.org/sid/binutils > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > --- > > scripts/Makefile.package | 27 ++++++++++++++++++++++----- > scripts/package/mkdebian | 27 +++++++++++++++++++++++++++ > 2 files changed, 49 insertions(+), 5 deletions(-) > > diff --git a/scripts/Makefile.package b/scripts/Makefile.package > index dfbf40454a99..cb135c99a273 100644 > --- a/scripts/Makefile.package > +++ b/scripts/Makefile.package > @@ -50,6 +50,21 @@ fi ; \ > tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ > --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3) > > +# Source Tarball > +# --------------------------------------------------------------------------- > + > +quiet_cmd_exclude_list = GEN $@ > + cmd_exclude_list = $(srctree)/scripts/gen-exclude.py --prefix=./ --rootdir=$(srctree) > $@; echo "./$@" >> $@ > + > +.exclude-list: FORCE > + $(call cmd,exclude_list) > + > +quiet_cmd_tar = TAR $@ > + cmd_tar = tar -I $(KGZIP) -c -f $@ -C $(srctree) --exclude-from=$< --exclude=./$@ --transform 's:^\.:linux:S' . > + > +%.tar.gz: .exclude-list > + $(call cmd,tar) > + > # rpm-pkg > # --------------------------------------------------------------------------- > PHONY += rpm-pkg > @@ -81,12 +96,11 @@ binrpm-pkg: > > PHONY += deb-pkg > deb-pkg: > - $(MAKE) clean > $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian > - $(call cmd,src_tar,$(KDEB_SOURCENAME)) > - origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ > - mv $(KDEB_SOURCENAME).tar.gz ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz > - +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) --source-option=-sP -i.git -us -uc > + $(Q)origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ > + $(MAKE) -f $(srctree)/scripts/Makefile.package ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz > + +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) \ > + --build=source,binary --source-option=-sP -nc -us -uc > > PHONY += bindeb-pkg > bindeb-pkg: > @@ -174,4 +188,7 @@ help: > @echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball' > @echo ' perf-tarzst-src-pkg - Build $(perf-tar).tar.zst source tarball' > > +PHONY += FORCE > +FORCE: > + > .PHONY: $(PHONY) > diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian > index c3bbef7a6754..12c057ffbe6e 100755 > --- a/scripts/package/mkdebian > +++ b/scripts/package/mkdebian > @@ -84,6 +84,8 @@ set_debarch() { > fi > } > > +rm -rf debian > + > # Some variables and settings used throughout the script > version=$KERNELRELEASE > if [ -n "$KDEB_PKGVERSION" ]; then > @@ -135,6 +137,31 @@ fi > mkdir -p debian/source/ > echo "1.0" > debian/source/format > > +cat<<'EOF' > debian/source/local-options > +# > +# Ugly: ignore anything except .config or debian/ > +# (is there a cleaner way to do this?) > +# > +diff-ignore > + > +extend-diff-ignore = ^[^.d] > + > +extend-diff-ignore = ^\.[^c] > +extend-diff-ignore = ^\.c($|[^o]) > +extend-diff-ignore = ^\.co($|[^n]) > +extend-diff-ignore = ^\.con($|[^f]) > +extend-diff-ignore = ^\.conf($|[^i]) > +extend-diff-ignore = ^\.confi($|[^g]) > +extend-diff-ignore = ^\.config. > + > +extend-diff-ignore = ^d($|[^e]) > +extend-diff-ignore = ^de($|[^b]) > +extend-diff-ignore = ^deb($|[^i]) > +extend-diff-ignore = ^debi($|[^a]) > +extend-diff-ignore = ^debia($|[^n]) > +extend-diff-ignore = ^debian[^/] > +EOF > + > echo $debarch > debian/arch > extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev:native)" > extra_build_depends="$extra_build_depends, $(if_enabled_echo CONFIG_SYSTEM_TRUSTED_KEYRING libssl-dev:native)" > -- > 2.34.1 >
On Sun, Jan 29, 2023 at 8:31 AM Sedat Dilek <sedat.dilek@gmail.com> wrote: > > On Sat, Jan 28, 2023 at 6:40 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > > > If you run 'make deb-pkg', all objects are lost due to 'make clean', > > which makes the incremental builds impossible. > > > > Instead of cleaning, pass the exclude list to tar's --exclude-from > > option. > > > > Previously, *.diff.gz contained some check-in files such as > > .clang-format, .cocciconfig. > > > > With this commit, *.diff.gz will only contain the .config and debian/. > > The other source files will go into the tarball. > > > > Thanks for the patch. > > While at this... > > ...why not switch over to Debian's packaging default XZ compressor: > *.orig.xz and *.diff.xz (or *.debian.tar.xz)? Does debian support *.diff.xz? I do not think so. *.debian.tar.xz requires "Format: 3.0 (quilt)" migration. See scripts/package/mkdebian. We use "Format: 1.0", which only supports gzip. It is true the Debian kernel uses "Format: 3.0 (quilt)", but I do not think it will fit to the upstream kernel. Rather, I want to use the Native format since I do not see much sense in the *.orig.tar.gz / *.diff.gz split for the upstream project. My plan is to stop cleaning first, then change the source format if it is desirable. > > EXAMPLE binutils: > > DSC: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40-2.dsc This is "Format: 3.0 (quilt)". > TAR: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40.orig.tar.xz > DIFF: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40-2.debian.tar.xz This is not a diff. It is a tarball of the debian/ directory. Real diffs are stored in debian/patches/. > > -Sedat- > > [1] https://packages.debian.org/sid/binutils > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > > --- > > > > scripts/Makefile.package | 27 ++++++++++++++++++++++----- > > scripts/package/mkdebian | 27 +++++++++++++++++++++++++++ > > 2 files changed, 49 insertions(+), 5 deletions(-) > > > > diff --git a/scripts/Makefile.package b/scripts/Makefile.package > > index dfbf40454a99..cb135c99a273 100644 > > --- a/scripts/Makefile.package > > +++ b/scripts/Makefile.package > > @@ -50,6 +50,21 @@ fi ; \ > > tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ > > --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3) > > > > +# Source Tarball > > +# --------------------------------------------------------------------------- > > + > > +quiet_cmd_exclude_list = GEN $@ > > + cmd_exclude_list = $(srctree)/scripts/gen-exclude.py --prefix=./ --rootdir=$(srctree) > $@; echo "./$@" >> $@ > > + > > +.exclude-list: FORCE > > + $(call cmd,exclude_list) > > + > > +quiet_cmd_tar = TAR $@ > > + cmd_tar = tar -I $(KGZIP) -c -f $@ -C $(srctree) --exclude-from=$< --exclude=./$@ --transform 's:^\.:linux:S' . > > + > > +%.tar.gz: .exclude-list > > + $(call cmd,tar) > > + > > # rpm-pkg > > # --------------------------------------------------------------------------- > > PHONY += rpm-pkg > > @@ -81,12 +96,11 @@ binrpm-pkg: > > > > PHONY += deb-pkg > > deb-pkg: > > - $(MAKE) clean > > $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian > > - $(call cmd,src_tar,$(KDEB_SOURCENAME)) > > - origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ > > - mv $(KDEB_SOURCENAME).tar.gz ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz > > - +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) --source-option=-sP -i.git -us -uc > > + $(Q)origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ > > + $(MAKE) -f $(srctree)/scripts/Makefile.package ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz > > + +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) \ > > + --build=source,binary --source-option=-sP -nc -us -uc > > > > PHONY += bindeb-pkg > > bindeb-pkg: > > @@ -174,4 +188,7 @@ help: > > @echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball' > > @echo ' perf-tarzst-src-pkg - Build $(perf-tar).tar.zst source tarball' > > > > +PHONY += FORCE > > +FORCE: > > + > > .PHONY: $(PHONY) > > diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian > > index c3bbef7a6754..12c057ffbe6e 100755 > > --- a/scripts/package/mkdebian > > +++ b/scripts/package/mkdebian > > @@ -84,6 +84,8 @@ set_debarch() { > > fi > > } > > > > +rm -rf debian > > + > > # Some variables and settings used throughout the script > > version=$KERNELRELEASE > > if [ -n "$KDEB_PKGVERSION" ]; then > > @@ -135,6 +137,31 @@ fi > > mkdir -p debian/source/ > > echo "1.0" > debian/source/format > > > > +cat<<'EOF' > debian/source/local-options > > +# > > +# Ugly: ignore anything except .config or debian/ > > +# (is there a cleaner way to do this?) > > +# > > +diff-ignore > > + > > +extend-diff-ignore = ^[^.d] > > + > > +extend-diff-ignore = ^\.[^c] > > +extend-diff-ignore = ^\.c($|[^o]) > > +extend-diff-ignore = ^\.co($|[^n]) > > +extend-diff-ignore = ^\.con($|[^f]) > > +extend-diff-ignore = ^\.conf($|[^i]) > > +extend-diff-ignore = ^\.confi($|[^g]) > > +extend-diff-ignore = ^\.config. > > + > > +extend-diff-ignore = ^d($|[^e]) > > +extend-diff-ignore = ^de($|[^b]) > > +extend-diff-ignore = ^deb($|[^i]) > > +extend-diff-ignore = ^debi($|[^a]) > > +extend-diff-ignore = ^debia($|[^n]) > > +extend-diff-ignore = ^debian[^/] > > +EOF > > + > > echo $debarch > debian/arch > > extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev:native)" > > extra_build_depends="$extra_build_depends, $(if_enabled_echo CONFIG_SYSTEM_TRUSTED_KEYRING libssl-dev:native)" > > -- > > 2.34.1 > > -- Best Regards Masahiro Yamada
On Sun, Jan 29, 2023 at 9:08 AM Masahiro Yamada <masahiroy@kernel.org> wrote: > > On Sun, Jan 29, 2023 at 8:31 AM Sedat Dilek <sedat.dilek@gmail.com> wrote: > > > > On Sat, Jan 28, 2023 at 6:40 PM Masahiro Yamada <masahiroy@kernel.org> wrote: > > > > > > If you run 'make deb-pkg', all objects are lost due to 'make clean', > > > which makes the incremental builds impossible. > > > > > > Instead of cleaning, pass the exclude list to tar's --exclude-from > > > option. > > > > > > Previously, *.diff.gz contained some check-in files such as > > > .clang-format, .cocciconfig. > > > > > > With this commit, *.diff.gz will only contain the .config and debian/. > > > The other source files will go into the tarball. > > > > > > > Thanks for the patch. > > > > While at this... > > > > ...why not switch over to Debian's packaging default XZ compressor: > > *.orig.xz and *.diff.xz (or *.debian.tar.xz)? > > > Does debian support *.diff.xz? > I do not think so. > > *.debian.tar.xz requires "Format: 3.0 (quilt)" migration. > > > See scripts/package/mkdebian. > We use "Format: 1.0", which only supports gzip. > Ah OK. > > It is true the Debian kernel uses "Format: 3.0 (quilt)", > but I do not think it will fit to the upstream kernel. > > Rather, I want to use the Native format since I do not > see much sense in the *.orig.tar.gz / *.diff.gz split > for the upstream project. > > > My plan is to stop cleaning first, > then change the source format if it is desirable. > Yes, makes sense. -Sedat- > > > > > > > > EXAMPLE binutils: > > > > DSC: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40-2.dsc > > This is "Format: 3.0 (quilt)". > > > > TAR: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40.orig.tar.xz > > DIFF: http://deb.debian.org/debian/pool/main/b/binutils/binutils_2.40-2.debian.tar.xz > > > This is not a diff. It is a tarball of the debian/ directory. > Real diffs are stored in debian/patches/. > > > > > > > > > -Sedat- > > > > [1] https://packages.debian.org/sid/binutils > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > > > --- > > > > > > scripts/Makefile.package | 27 ++++++++++++++++++++++----- > > > scripts/package/mkdebian | 27 +++++++++++++++++++++++++++ > > > 2 files changed, 49 insertions(+), 5 deletions(-) > > > > > > diff --git a/scripts/Makefile.package b/scripts/Makefile.package > > > index dfbf40454a99..cb135c99a273 100644 > > > --- a/scripts/Makefile.package > > > +++ b/scripts/Makefile.package > > > @@ -50,6 +50,21 @@ fi ; \ > > > tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ > > > --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3) > > > > > > +# Source Tarball > > > +# --------------------------------------------------------------------------- > > > + > > > +quiet_cmd_exclude_list = GEN $@ > > > + cmd_exclude_list = $(srctree)/scripts/gen-exclude.py --prefix=./ --rootdir=$(srctree) > $@; echo "./$@" >> $@ > > > + > > > +.exclude-list: FORCE > > > + $(call cmd,exclude_list) > > > + > > > +quiet_cmd_tar = TAR $@ > > > + cmd_tar = tar -I $(KGZIP) -c -f $@ -C $(srctree) --exclude-from=$< --exclude=./$@ --transform 's:^\.:linux:S' . > > > + > > > +%.tar.gz: .exclude-list > > > + $(call cmd,tar) > > > + > > > # rpm-pkg > > > # --------------------------------------------------------------------------- > > > PHONY += rpm-pkg > > > @@ -81,12 +96,11 @@ binrpm-pkg: > > > > > > PHONY += deb-pkg > > > deb-pkg: > > > - $(MAKE) clean > > > $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian > > > - $(call cmd,src_tar,$(KDEB_SOURCENAME)) > > > - origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ > > > - mv $(KDEB_SOURCENAME).tar.gz ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz > > > - +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) --source-option=-sP -i.git -us -uc > > > + $(Q)origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ > > > + $(MAKE) -f $(srctree)/scripts/Makefile.package ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz > > > + +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) \ > > > + --build=source,binary --source-option=-sP -nc -us -uc > > > > > > PHONY += bindeb-pkg > > > bindeb-pkg: > > > @@ -174,4 +188,7 @@ help: > > > @echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball' > > > @echo ' perf-tarzst-src-pkg - Build $(perf-tar).tar.zst source tarball' > > > > > > +PHONY += FORCE > > > +FORCE: > > > + > > > .PHONY: $(PHONY) > > > diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian > > > index c3bbef7a6754..12c057ffbe6e 100755 > > > --- a/scripts/package/mkdebian > > > +++ b/scripts/package/mkdebian > > > @@ -84,6 +84,8 @@ set_debarch() { > > > fi > > > } > > > > > > +rm -rf debian > > > + > > > # Some variables and settings used throughout the script > > > version=$KERNELRELEASE > > > if [ -n "$KDEB_PKGVERSION" ]; then > > > @@ -135,6 +137,31 @@ fi > > > mkdir -p debian/source/ > > > echo "1.0" > debian/source/format > > > > > > +cat<<'EOF' > debian/source/local-options > > > +# > > > +# Ugly: ignore anything except .config or debian/ > > > +# (is there a cleaner way to do this?) > > > +# > > > +diff-ignore > > > + > > > +extend-diff-ignore = ^[^.d] > > > + > > > +extend-diff-ignore = ^\.[^c] > > > +extend-diff-ignore = ^\.c($|[^o]) > > > +extend-diff-ignore = ^\.co($|[^n]) > > > +extend-diff-ignore = ^\.con($|[^f]) > > > +extend-diff-ignore = ^\.conf($|[^i]) > > > +extend-diff-ignore = ^\.confi($|[^g]) > > > +extend-diff-ignore = ^\.config. > > > + > > > +extend-diff-ignore = ^d($|[^e]) > > > +extend-diff-ignore = ^de($|[^b]) > > > +extend-diff-ignore = ^deb($|[^i]) > > > +extend-diff-ignore = ^debi($|[^a]) > > > +extend-diff-ignore = ^debia($|[^n]) > > > +extend-diff-ignore = ^debian[^/] > > > +EOF > > > + > > > echo $debarch > debian/arch > > > extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev:native)" > > > extra_build_depends="$extra_build_depends, $(if_enabled_echo CONFIG_SYSTEM_TRUSTED_KEYRING libssl-dev:native)" > > > -- > > > 2.34.1 > > > > > > > -- > Best Regards > Masahiro Yamada
diff --git a/scripts/Makefile.package b/scripts/Makefile.package index dfbf40454a99..cb135c99a273 100644 --- a/scripts/Makefile.package +++ b/scripts/Makefile.package @@ -50,6 +50,21 @@ fi ; \ tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3) +# Source Tarball +# --------------------------------------------------------------------------- + +quiet_cmd_exclude_list = GEN $@ + cmd_exclude_list = $(srctree)/scripts/gen-exclude.py --prefix=./ --rootdir=$(srctree) > $@; echo "./$@" >> $@ + +.exclude-list: FORCE + $(call cmd,exclude_list) + +quiet_cmd_tar = TAR $@ + cmd_tar = tar -I $(KGZIP) -c -f $@ -C $(srctree) --exclude-from=$< --exclude=./$@ --transform 's:^\.:linux:S' . + +%.tar.gz: .exclude-list + $(call cmd,tar) + # rpm-pkg # --------------------------------------------------------------------------- PHONY += rpm-pkg @@ -81,12 +96,11 @@ binrpm-pkg: PHONY += deb-pkg deb-pkg: - $(MAKE) clean $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian - $(call cmd,src_tar,$(KDEB_SOURCENAME)) - origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ - mv $(KDEB_SOURCENAME).tar.gz ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz - +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) --source-option=-sP -i.git -us -uc + $(Q)origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ + $(MAKE) -f $(srctree)/scripts/Makefile.package ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz + +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) \ + --build=source,binary --source-option=-sP -nc -us -uc PHONY += bindeb-pkg bindeb-pkg: @@ -174,4 +188,7 @@ help: @echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball' @echo ' perf-tarzst-src-pkg - Build $(perf-tar).tar.zst source tarball' +PHONY += FORCE +FORCE: + .PHONY: $(PHONY) diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian index c3bbef7a6754..12c057ffbe6e 100755 --- a/scripts/package/mkdebian +++ b/scripts/package/mkdebian @@ -84,6 +84,8 @@ set_debarch() { fi } +rm -rf debian + # Some variables and settings used throughout the script version=$KERNELRELEASE if [ -n "$KDEB_PKGVERSION" ]; then @@ -135,6 +137,31 @@ fi mkdir -p debian/source/ echo "1.0" > debian/source/format +cat<<'EOF' > debian/source/local-options +# +# Ugly: ignore anything except .config or debian/ +# (is there a cleaner way to do this?) +# +diff-ignore + +extend-diff-ignore = ^[^.d] + +extend-diff-ignore = ^\.[^c] +extend-diff-ignore = ^\.c($|[^o]) +extend-diff-ignore = ^\.co($|[^n]) +extend-diff-ignore = ^\.con($|[^f]) +extend-diff-ignore = ^\.conf($|[^i]) +extend-diff-ignore = ^\.confi($|[^g]) +extend-diff-ignore = ^\.config. + +extend-diff-ignore = ^d($|[^e]) +extend-diff-ignore = ^de($|[^b]) +extend-diff-ignore = ^deb($|[^i]) +extend-diff-ignore = ^debi($|[^a]) +extend-diff-ignore = ^debia($|[^n]) +extend-diff-ignore = ^debian[^/] +EOF + echo $debarch > debian/arch extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev:native)" extra_build_depends="$extra_build_depends, $(if_enabled_echo CONFIG_SYSTEM_TRUSTED_KEYRING libssl-dev:native)"
If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible. Instead of cleaning, pass the exclude list to tar's --exclude-from option. Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig. With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the tarball. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> --- scripts/Makefile.package | 27 ++++++++++++++++++++++----- scripts/package/mkdebian | 27 +++++++++++++++++++++++++++ 2 files changed, 49 insertions(+), 5 deletions(-)