diff mbox series

scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference

Message ID 20230126211831.2274211-1-arnd@kernel.org (mailing list archive)
State Accepted
Headers show
Series scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference | expand

Commit Message

Arnd Bergmann Jan. 26, 2023, 9:17 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>

The newly added MSI support is mostly hidden inside of an #ifdef,
except for one line that now causes a build failure when MSI
is disabled:

drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
 1698 |         platform_msi_domain_free_irqs(hba->dev);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Above that, the symbol that guards the other call was recently
removed, so that is all dead code at the moment.

Remove the incorrect #ifdef and instead of a Kconfig dependency
to only allow building the driver when CONFIG_GENERIC_MSI_IRQ
is enabled. This symbol is always present when PCI_MSI
or ARM_GIC_V3_ITS are enabled, both of which should be present
on kernels that can run on Qualcomm SoCs.

The 'select RESET_CONTROLLER' in combination with this dependency
unfortunately causes a dependency loop and this is a user-visible
symbol, so it's better to change both to 'depends on'.

Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops")
Fixes: 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
Not sure if this is the best solution, both the GENERIC_MSI_IRQ
dependencies and the RESET_CONTROLLER dependencies are a bit
inconsistent already. Feel free to pick another approach that
addresses both of the bugs I found.
---
 drivers/ufs/host/Kconfig    | 3 ++-
 drivers/ufs/host/ufs-qcom.c | 8 --------
 2 files changed, 2 insertions(+), 9 deletions(-)

Comments

Manivannan Sadhasivam Jan. 27, 2023, 6:02 a.m. UTC | #1 
On Thu, Jan 26, 2023 at 10:17:31PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The newly added MSI support is mostly hidden inside of an #ifdef,
> except for one line that now causes a build failure when MSI
> is disabled:
> 
> drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
> drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
>  1698 |         platform_msi_domain_free_irqs(hba->dev);
>       |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Above that, the symbol that guards the other call was recently
> removed, so that is all dead code at the moment.
> 
> Remove the incorrect #ifdef and instead of a Kconfig dependency
> to only allow building the driver when CONFIG_GENERIC_MSI_IRQ
> is enabled. This symbol is always present when PCI_MSI
> or ARM_GIC_V3_ITS are enabled, both of which should be present
> on kernels that can run on Qualcomm SoCs.
> 
> The 'select RESET_CONTROLLER' in combination with this dependency
> unfortunately causes a dependency loop and this is a user-visible
> symbol, so it's better to change both to 'depends on'.
> 
> Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops")
> Fixes: 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>

> ---
> Not sure if this is the best solution, both the GENERIC_MSI_IRQ
> dependencies and the RESET_CONTROLLER dependencies are a bit
> inconsistent already. Feel free to pick another approach that
> addresses both of the bugs I found.

I think your proposed solution works best at the moment.

Thanks,
Mani

> ---
>  drivers/ufs/host/Kconfig    | 3 ++-
>  drivers/ufs/host/ufs-qcom.c | 8 --------
>  2 files changed, 2 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
> index 139064e70a34..663881437921 100644
> --- a/drivers/ufs/host/Kconfig
> +++ b/drivers/ufs/host/Kconfig
> @@ -57,8 +57,9 @@ config SCSI_UFS_DWC_TC_PLATFORM
>  config SCSI_UFS_QCOM
>  	tristate "QCOM specific hooks to UFS controller platform driver"
>  	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
> +	depends on GENERIC_MSI_IRQ
> +	depends on RESET_CONTROLLER
>  	select QCOM_SCM if SCSI_UFS_CRYPTO
> -	select RESET_CONTROLLER
>  	help
>  	  This selects the QCOM specific additions to UFSHCD platform driver.
>  	  UFS host on QCOM needs some vendor specific configuration before
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 681da3ea7154..eb66b5f6cf19 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -1538,7 +1538,6 @@ static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba,
>  	return 0;
>  }
>  
> -#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
>  static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
>  {
>  	struct device *dev = msi_desc_to_dev(desc);
> @@ -1626,13 +1625,6 @@ static int ufs_qcom_config_esi(struct ufs_hba *hba)
>  	return ret;
>  }
>  
> -#else
> -static int ufs_qcom_config_esi(struct ufs_hba *hba)
> -{
> -	return -EOPNOTSUPP;
> -}
> -#endif
> -
>  /*
>   * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
>   *
> -- 
> 2.39.0
>
Can Guo Jan. 30, 2023, 4:03 a.m. UTC | #2 
Hi Mani and Arnd,

On 1/27/2023 2:02 PM, Manivannan Sadhasivam wrote:
> On Thu, Jan 26, 2023 at 10:17:31PM +0100, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> The newly added MSI support is mostly hidden inside of an #ifdef,
>> except for one line that now causes a build failure when MSI
>> is disabled:
>>
>> drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
>> drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
>>   1698 |         platform_msi_domain_free_irqs(hba->dev);
>>        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> Above that, the symbol that guards the other call was recently
>> removed, so that is all dead code at the moment.
>>
>> Remove the incorrect #ifdef and instead of a Kconfig dependency
>> to only allow building the driver when CONFIG_GENERIC_MSI_IRQ
>> is enabled. This symbol is always present when PCI_MSI
>> or ARM_GIC_V3_ITS are enabled, both of which should be present
>> on kernels that can run on Qualcomm SoCs.
>>
>> The 'select RESET_CONTROLLER' in combination with this dependency
>> unfortunately causes a dependency loop and this is a user-visible
>> symbol, so it's better to change both to 'depends on'.
>>
>> Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops")
>> Fixes: 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN")
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
>
>> ---
>> Not sure if this is the best solution, both the GENERIC_MSI_IRQ
>> dependencies and the RESET_CONTROLLER dependencies are a bit
>> inconsistent already. Feel free to pick another approach that
>> addresses both of the bugs I found.
> I think your proposed solution works best at the moment.
>
> Thanks,
> Mani
>
>> ---
>>   drivers/ufs/host/Kconfig    | 3 ++-
>>   drivers/ufs/host/ufs-qcom.c | 8 --------
>>   2 files changed, 2 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
>> index 139064e70a34..663881437921 100644
>> --- a/drivers/ufs/host/Kconfig
>> +++ b/drivers/ufs/host/Kconfig
>> @@ -57,8 +57,9 @@ config SCSI_UFS_DWC_TC_PLATFORM
>>   config SCSI_UFS_QCOM
>>   	tristate "QCOM specific hooks to UFS controller platform driver"
>>   	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
>> +	depends on GENERIC_MSI_IRQ
>> +	depends on RESET_CONTROLLER
>>   	select QCOM_SCM if SCSI_UFS_CRYPTO
>> -	select RESET_CONTROLLER
>>   	help
>>   	  This selects the QCOM specific additions to UFSHCD platform driver.
>>   	  UFS host on QCOM needs some vendor specific configuration before
>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>> index 681da3ea7154..eb66b5f6cf19 100644
>> --- a/drivers/ufs/host/ufs-qcom.c
>> +++ b/drivers/ufs/host/ufs-qcom.c
>> @@ -1538,7 +1538,6 @@ static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba,
>>   	return 0;
>>   }
>>   
>> -#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
>>   static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
>>   {
>>   	struct device *dev = msi_desc_to_dev(desc);
>> @@ -1626,13 +1625,6 @@ static int ufs_qcom_config_esi(struct ufs_hba *hba)
>>   	return ret;
>>   }
>>   
>> -#else
>> -static int ufs_qcom_config_esi(struct ufs_hba *hba)
>> -{
>> -	return -EOPNOTSUPP;
>> -}
>> -#endif
>> -
>>   /*
>>    * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
>>    *
>> -- 
>> 2.39.0
>>

Thank you for pointing to 13e7accb81d6 ("genirq: Get rid of 
GENERIC_MSI_IRQ_DOMAIN"),

which I was not aware of. I am thinking about fixing it just like how

13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN") is fixing 
drivers/dma/qcom/hidma.c -

In ufs-qcom.c, use CONFIG_GENERIC_MSI_IRQ instead of 
CONFIG_GENERIC_MSI_IRQ_DOMAIN,

and meanwhile add #ifdef check before calling 
platform_msi_domain_free_irqs().

Please let me know your idea.


Thanks.
Regards,
Can Guo
Manivannan Sadhasivam Jan. 30, 2023, 7:45 a.m. UTC | #3 
On Mon, Jan 30, 2023 at 12:03:45PM +0800, Can Guo wrote:
> Hi Mani and Arnd,
> 
> On 1/27/2023 2:02 PM, Manivannan Sadhasivam wrote:
> > On Thu, Jan 26, 2023 at 10:17:31PM +0100, Arnd Bergmann wrote:
> > > From: Arnd Bergmann <arnd@arndb.de>
> > > 
> > > The newly added MSI support is mostly hidden inside of an #ifdef,
> > > except for one line that now causes a build failure when MSI
> > > is disabled:
> > > 
> > > drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
> > > drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
> > >   1698 |         platform_msi_domain_free_irqs(hba->dev);
> > >        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > 
> > > Above that, the symbol that guards the other call was recently
> > > removed, so that is all dead code at the moment.
> > > 
> > > Remove the incorrect #ifdef and instead of a Kconfig dependency
> > > to only allow building the driver when CONFIG_GENERIC_MSI_IRQ
> > > is enabled. This symbol is always present when PCI_MSI
> > > or ARM_GIC_V3_ITS are enabled, both of which should be present
> > > on kernels that can run on Qualcomm SoCs.
> > > 
> > > The 'select RESET_CONTROLLER' in combination with this dependency
> > > unfortunately causes a dependency loop and this is a user-visible
> > > symbol, so it's better to change both to 'depends on'.
> > > 
> > > Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops")
> > > Fixes: 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN")
> > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
> > 
> > > ---
> > > Not sure if this is the best solution, both the GENERIC_MSI_IRQ
> > > dependencies and the RESET_CONTROLLER dependencies are a bit
> > > inconsistent already. Feel free to pick another approach that
> > > addresses both of the bugs I found.
> > I think your proposed solution works best at the moment.
> > 
> > Thanks,
> > Mani
> > 
> > > ---
> > >   drivers/ufs/host/Kconfig    | 3 ++-
> > >   drivers/ufs/host/ufs-qcom.c | 8 --------
> > >   2 files changed, 2 insertions(+), 9 deletions(-)
> > > 
> > > diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
> > > index 139064e70a34..663881437921 100644
> > > --- a/drivers/ufs/host/Kconfig
> > > +++ b/drivers/ufs/host/Kconfig
> > > @@ -57,8 +57,9 @@ config SCSI_UFS_DWC_TC_PLATFORM
> > >   config SCSI_UFS_QCOM
> > >   	tristate "QCOM specific hooks to UFS controller platform driver"
> > >   	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
> > > +	depends on GENERIC_MSI_IRQ
> > > +	depends on RESET_CONTROLLER
> > >   	select QCOM_SCM if SCSI_UFS_CRYPTO
> > > -	select RESET_CONTROLLER
> > >   	help
> > >   	  This selects the QCOM specific additions to UFSHCD platform driver.
> > >   	  UFS host on QCOM needs some vendor specific configuration before
> > > diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> > > index 681da3ea7154..eb66b5f6cf19 100644
> > > --- a/drivers/ufs/host/ufs-qcom.c
> > > +++ b/drivers/ufs/host/ufs-qcom.c
> > > @@ -1538,7 +1538,6 @@ static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba,
> > >   	return 0;
> > >   }
> > > -#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
> > >   static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
> > >   {
> > >   	struct device *dev = msi_desc_to_dev(desc);
> > > @@ -1626,13 +1625,6 @@ static int ufs_qcom_config_esi(struct ufs_hba *hba)
> > >   	return ret;
> > >   }
> > > -#else
> > > -static int ufs_qcom_config_esi(struct ufs_hba *hba)
> > > -{
> > > -	return -EOPNOTSUPP;
> > > -}
> > > -#endif
> > > -
> > >   /*
> > >    * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
> > >    *
> > > -- 
> > > 2.39.0
> > > 
> 
> Thank you for pointing to 13e7accb81d6 ("genirq: Get rid of
> GENERIC_MSI_IRQ_DOMAIN"),
> 
> which I was not aware of. I am thinking about fixing it just like how
> 
> 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN") is fixing
> drivers/dma/qcom/hidma.c -
> 
> In ufs-qcom.c, use CONFIG_GENERIC_MSI_IRQ instead of
> CONFIG_GENERIC_MSI_IRQ_DOMAIN,
> 
> and meanwhile add #ifdef check before calling
> platform_msi_domain_free_irqs().
> 
> Please let me know your idea.
> 

No. Let's get rid of the ifdef's please... I like Arnd's patch as it models the
dependency nicely in Kconfig. And most (all?) of the qcom platforms require
GENERIC_MSI_IRQ and RESET_CONTROLLER one way or the other anyway.

Thanks,
Mani

> 
> Thanks.
> Regards,
> Can Guo
> 
>
Can Guo Jan. 30, 2023, 7:55 a.m. UTC | #4 
Hi Mani,

On 1/30/2023 3:45 PM, Manivannan Sadhasivam wrote:
> On Mon, Jan 30, 2023 at 12:03:45PM +0800, Can Guo wrote:
>> Hi Mani and Arnd,
>>
>> On 1/27/2023 2:02 PM, Manivannan Sadhasivam wrote:
>>> On Thu, Jan 26, 2023 at 10:17:31PM +0100, Arnd Bergmann wrote:
>>>> From: Arnd Bergmann <arnd@arndb.de>
>>>>
>>>> The newly added MSI support is mostly hidden inside of an #ifdef,
>>>> except for one line that now causes a build failure when MSI
>>>> is disabled:
>>>>
>>>> drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
>>>> drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
>>>>    1698 |         platform_msi_domain_free_irqs(hba->dev);
>>>>         |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>
>>>> Above that, the symbol that guards the other call was recently
>>>> removed, so that is all dead code at the moment.
>>>>
>>>> Remove the incorrect #ifdef and instead of a Kconfig dependency
>>>> to only allow building the driver when CONFIG_GENERIC_MSI_IRQ
>>>> is enabled. This symbol is always present when PCI_MSI
>>>> or ARM_GIC_V3_ITS are enabled, both of which should be present
>>>> on kernels that can run on Qualcomm SoCs.
>>>>
>>>> The 'select RESET_CONTROLLER' in combination with this dependency
>>>> unfortunately causes a dependency loop and this is a user-visible
>>>> symbol, so it's better to change both to 'depends on'.
>>>>
>>>> Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops")
>>>> Fixes: 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN")
>>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>>> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
>>>
>>>> ---
>>>> Not sure if this is the best solution, both the GENERIC_MSI_IRQ
>>>> dependencies and the RESET_CONTROLLER dependencies are a bit
>>>> inconsistent already. Feel free to pick another approach that
>>>> addresses both of the bugs I found.
>>> I think your proposed solution works best at the moment.
>>>
>>> Thanks,
>>> Mani
>>>
>>>> ---
>>>>    drivers/ufs/host/Kconfig    | 3 ++-
>>>>    drivers/ufs/host/ufs-qcom.c | 8 --------
>>>>    2 files changed, 2 insertions(+), 9 deletions(-)
>>>>
>>>> diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
>>>> index 139064e70a34..663881437921 100644
>>>> --- a/drivers/ufs/host/Kconfig
>>>> +++ b/drivers/ufs/host/Kconfig
>>>> @@ -57,8 +57,9 @@ config SCSI_UFS_DWC_TC_PLATFORM
>>>>    config SCSI_UFS_QCOM
>>>>    	tristate "QCOM specific hooks to UFS controller platform driver"
>>>>    	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
>>>> +	depends on GENERIC_MSI_IRQ
>>>> +	depends on RESET_CONTROLLER
>>>>    	select QCOM_SCM if SCSI_UFS_CRYPTO
>>>> -	select RESET_CONTROLLER
>>>>    	help
>>>>    	  This selects the QCOM specific additions to UFSHCD platform driver.
>>>>    	  UFS host on QCOM needs some vendor specific configuration before
>>>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>>>> index 681da3ea7154..eb66b5f6cf19 100644
>>>> --- a/drivers/ufs/host/ufs-qcom.c
>>>> +++ b/drivers/ufs/host/ufs-qcom.c
>>>> @@ -1538,7 +1538,6 @@ static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba,
>>>>    	return 0;
>>>>    }
>>>> -#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
>>>>    static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
>>>>    {
>>>>    	struct device *dev = msi_desc_to_dev(desc);
>>>> @@ -1626,13 +1625,6 @@ static int ufs_qcom_config_esi(struct ufs_hba *hba)
>>>>    	return ret;
>>>>    }
>>>> -#else
>>>> -static int ufs_qcom_config_esi(struct ufs_hba *hba)
>>>> -{
>>>> -	return -EOPNOTSUPP;
>>>> -}
>>>> -#endif
>>>> -
>>>>    /*
>>>>     * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
>>>>     *
>>>> -- 
>>>> 2.39.0
>>>>
>> Thank you for pointing to 13e7accb81d6 ("genirq: Get rid of
>> GENERIC_MSI_IRQ_DOMAIN"),
>>
>> which I was not aware of. I am thinking about fixing it just like how
>>
>> 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN") is fixing
>> drivers/dma/qcom/hidma.c -
>>
>> In ufs-qcom.c, use CONFIG_GENERIC_MSI_IRQ instead of
>> CONFIG_GENERIC_MSI_IRQ_DOMAIN,
>>
>> and meanwhile add #ifdef check before calling
>> platform_msi_domain_free_irqs().
>>
>> Please let me know your idea.
>>
> No. Let's get rid of the ifdef's please... I like Arnd's patch as it models the
> dependency nicely in Kconfig. And most (all?) of the qcom platforms require
> GENERIC_MSI_IRQ and RESET_CONTROLLER one way or the other anyway.
>
> Thanks,
> Mani


Make sense, I agree.


Thanks,

Can Guo.

>
>> Thanks.
>> Regards,
>> Can Guo
>>
>>
Martin K. Petersen Feb. 4, 2023, 1:17 a.m. UTC | #5 
Arnd,

> The newly added MSI support is mostly hidden inside of an #ifdef,
> except for one line that now causes a build failure when MSI is
> disabled:

Applied to 6.3/scsi-staging, thanks!
Martin K. Petersen Feb. 9, 2023, 2:43 a.m. UTC | #6 
On Thu, 26 Jan 2023 22:17:31 +0100, Arnd Bergmann wrote:

> The newly added MSI support is mostly hidden inside of an #ifdef,
> except for one line that now causes a build failure when MSI
> is disabled:
> 
> drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
> drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
>  1698 |         platform_msi_domain_free_irqs(hba->dev);
>       |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> [...]

Applied to 6.3/scsi-queue, thanks!

[1/1] scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
      https://git.kernel.org/mkp/scsi/c/49f262bc3c7a
diff mbox series

Patch

diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
index 139064e70a34..663881437921 100644
--- a/drivers/ufs/host/Kconfig
+++ b/drivers/ufs/host/Kconfig
@@ -57,8 +57,9 @@  config SCSI_UFS_DWC_TC_PLATFORM
 config SCSI_UFS_QCOM
 	tristate "QCOM specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
+	depends on GENERIC_MSI_IRQ
+	depends on RESET_CONTROLLER
 	select QCOM_SCM if SCSI_UFS_CRYPTO
-	select RESET_CONTROLLER
 	help
 	  This selects the QCOM specific additions to UFSHCD platform driver.
 	  UFS host on QCOM needs some vendor specific configuration before
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 681da3ea7154..eb66b5f6cf19 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1538,7 +1538,6 @@  static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba,
 	return 0;
 }
 
-#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
 static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
 {
 	struct device *dev = msi_desc_to_dev(desc);
@@ -1626,13 +1625,6 @@  static int ufs_qcom_config_esi(struct ufs_hba *hba)
 	return ret;
 }
 
-#else
-static int ufs_qcom_config_esi(struct ufs_hba *hba)
-{
-	return -EOPNOTSUPP;
-}
-#endif
-
 /*
  * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
  *