| Message ID | 20230126182435.70544-2-rayyan@ansari.sh (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | SimpleDRM: allow configuring physical width and height | expand |
Am 26.01.23 um 19:24 schrieb Rayyan Ansari: > Parse the width-mm and height-mm devicetree properties of the panel node, > and use this to set the DRM Display Mode instead of calculating it > based on a hardcoded DPI. > > Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> > --- > drivers/gpu/drm/tiny/simpledrm.c | 32 +++++++++++++++++++++++--------- > 1 file changed, 23 insertions(+), 9 deletions(-) > > diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c > index 162eb44dcba8..f8b18441cfcb 100644 > --- a/drivers/gpu/drm/tiny/simpledrm.c > +++ b/drivers/gpu/drm/tiny/simpledrm.c > @@ -599,16 +599,12 @@ static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = { > */ > > static struct drm_display_mode simpledrm_mode(unsigned int width, > - unsigned int height) > + unsigned int height, > + unsigned int width_mm, > + unsigned int height_mm) > { > - /* > - * Assume a monitor resolution of 96 dpi to > - * get a somewhat reasonable screen size. > - */ > const struct drm_display_mode mode = { > - DRM_MODE_INIT(60, width, height, > - DRM_MODE_RES_MM(width, 96ul), > - DRM_MODE_RES_MM(height, 96ul)) > + DRM_MODE_INIT(60, width, height, width_mm, height_mm) > }; > > return mode; > @@ -622,6 +618,8 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, > struct simpledrm_device *sdev; > struct drm_device *dev; > int width, height, stride; > + int width_mm = 0, height_mm = 0; > + struct device_node *panel_node; > const struct drm_format_info *format; > struct resource *res, *mem; > void __iomem *screen_base; > @@ -676,6 +674,13 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, > format = simplefb_get_format_of(dev, of_node); > if (IS_ERR(format)) > return ERR_CAST(format); > + > + panel_node = of_parse_phandle(of_node, "panel", 0); > + if (panel_node) { > + simplefb_read_u32_of(dev, panel_node, "width-mm", &width_mm); > + simplefb_read_u32_of(dev, panel_node, "height-mm", &height_mm); > + of_node_put(panel_node); > + } > } else { > drm_err(dev, "no simplefb configuration found\n"); > return ERR_PTR(-ENODEV); > @@ -686,7 +691,16 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, > return ERR_PTR(-EINVAL); > } > > - sdev->mode = simpledrm_mode(width, height); > + /* > + * Assume a monitor resolution of 96 dpi if physical dimensions > + * are not specified to get a somewhat reasonable screen size. > + */ > + if (!width_mm) > + width_mm = DRM_MODE_RES_MM(width, 96ul); > + if (!height_mm) > + height_mm = DRM_MODE_RES_MM(height, 96ul); > + > + sdev->mode = simpledrm_mode(width, height, width_mm, height_mm); > sdev->format = format; > sdev->pitch = stride; >
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c index 162eb44dcba8..f8b18441cfcb 100644 --- a/drivers/gpu/drm/tiny/simpledrm.c +++ b/drivers/gpu/drm/tiny/simpledrm.c @@ -599,16 +599,12 @@ static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = { */ static struct drm_display_mode simpledrm_mode(unsigned int width, - unsigned int height) + unsigned int height, + unsigned int width_mm, + unsigned int height_mm) { - /* - * Assume a monitor resolution of 96 dpi to - * get a somewhat reasonable screen size. - */ const struct drm_display_mode mode = { - DRM_MODE_INIT(60, width, height, - DRM_MODE_RES_MM(width, 96ul), - DRM_MODE_RES_MM(height, 96ul)) + DRM_MODE_INIT(60, width, height, width_mm, height_mm) }; return mode; @@ -622,6 +618,8 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, struct simpledrm_device *sdev; struct drm_device *dev; int width, height, stride; + int width_mm = 0, height_mm = 0; + struct device_node *panel_node; const struct drm_format_info *format; struct resource *res, *mem; void __iomem *screen_base; @@ -676,6 +674,13 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, format = simplefb_get_format_of(dev, of_node); if (IS_ERR(format)) return ERR_CAST(format); + + panel_node = of_parse_phandle(of_node, "panel", 0); + if (panel_node) { + simplefb_read_u32_of(dev, panel_node, "width-mm", &width_mm); + simplefb_read_u32_of(dev, panel_node, "height-mm", &height_mm); + of_node_put(panel_node); + } } else { drm_err(dev, "no simplefb configuration found\n"); return ERR_PTR(-ENODEV); @@ -686,7 +691,16 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, return ERR_PTR(-EINVAL); } - sdev->mode = simpledrm_mode(width, height); + /* + * Assume a monitor resolution of 96 dpi if physical dimensions + * are not specified to get a somewhat reasonable screen size. + */ + if (!width_mm) + width_mm = DRM_MODE_RES_MM(width, 96ul); + if (!height_mm) + height_mm = DRM_MODE_RES_MM(height, 96ul); + + sdev->mode = simpledrm_mode(width, height, width_mm, height_mm); sdev->format = format; sdev->pitch = stride;
Parse the width-mm and height-mm devicetree properties of the panel node, and use this to set the DRM Display Mode instead of calculating it based on a hardcoded DPI. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> --- drivers/gpu/drm/tiny/simpledrm.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-)