| Message ID | 20230207052829.3996-4-steev@kali.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add WCN6855 Bluetooth support | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Guessing tree name failed - patch did not apply |
On 7.02.2023 06:28, Steev Klimaszewski wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Steev Klimaszewski <steev@kali.org> > Reviewed-by: Brian Masney <bmasney@redhat.com> > > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > Changes since v3: > * Fix commit message changelog > > Changes since v2: > * No changes since v2 > > Changes since v1: > * change subject line, move node, and add my s-o-b > --- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index fa2d0d7d1367..eab54aab3b76 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -1207,6 +1207,20 @@ spi2: spi@988000 { > status = "disabled"; > }; > > + uart2: serial@988000 { > + compatible = "qcom,geni-uart"; > + reg = <0 0x00988000 0 0x4000>; > + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; > + clock-names = "se"; > + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > + operating-points-v2 = <&qup_opp_table_100mhz>; > + power-domains = <&rpmhpd SC8280XP_CX>; > + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, > + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; > + interconnect-names = "qup-core", "qup-config"; > + status = "disabled"; > + }; > + > i2c3: i2c@98c000 { > compatible = "qcom,geni-i2c"; > reg = <0 0x0098c000 0 0x4000>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index fa2d0d7d1367..eab54aab3b76 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -1207,6 +1207,20 @@ spi2: spi@988000 { status = "disabled"; }; + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c3: i2c@98c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0098c000 0 0x4000>;