| Message ID | 20230204133040.1236799-8-treapking@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Register Type-C mode-switch in DP bridge endpoints | expand |
On Sat, Feb 4, 2023 at 9:31 PM Pin-yen Lin <treapking@chromium.org> wrote: > > ITE IT6505 can be used in systems to switch the DP traffic between > two downstreams, which can be USB Type-C DisplayPort alternate mode > lane or regular DisplayPort output ports. > > Update the binding to accommodate this usage by introducing a > data-lanes and a mode-switch property on endpoints. > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > --- > > Changes in v11: > - Updated the description of the endpoints in the bindings > - Referenced video-interfaces.yaml instead for the endpoints binding > - Removed duplicated definitions from inherited schema > > Changes in v9: > - Fixed subject prefix again > - Changed the naming of the example node for it6505 > > Changes in v8: > - Updated bindings for data-lanes property > - Fixed subject prefix > > Changes in v7: > - Fixed issues reported by dt_binding_check. > - Updated the schema and the example dts for data-lanes. > - Changed to generic naming for the example dts node. > > Changes in v6: > - Remove switches node and use endpoints and data-lanes property to > describe the connections. > > .../bindings/display/bridge/ite,it6505.yaml | 101 +++++++++++++++--- > 1 file changed, 88 insertions(+), 13 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > index b16a9d9127dd..8ae9c5cba22c 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > @@ -75,22 +75,49 @@ properties: > port@1: > $ref: /schemas/graph.yaml#/$defs/port-base > unevaluatedProperties: false > - description: Video port for DP output > + description: > + Video port for DP output. Each endpoint connects to a video output > + downstream, and the "data-lanes" property is used to describe the pin > + connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3, > + respectively. > > - properties: > - endpoint: > - $ref: /schemas/graph.yaml#/$defs/endpoint-base > + > + patternProperties: > + "^endpoint@[01]$": > + $ref: /schemas/media/video-interfaces.yaml# > unevaluatedProperties: false > > properties: > + reg: true > + > + remote-endpoint: true > + > data-lanes: > - minItems: 1 > - uniqueItems: true > - items: > - - enum: [ 0, 1 ] > - - const: 1 > - - const: 2 > - - const: 3 > + oneOf: > + - items: > + - enum: [0, 1, 2, 3] Based on the datasheets we have and the downstream driver, I assume the hardware implements "lane swap" as simply reversing the order of the output pins. In that case the hardware can't output 1 lane DP on any arbitrary lane, but only lane 0 or 3. > + - items: > + - const: 0 > + - const: 1 > + > + - items: > + - const: 2 > + - const: 3 And maybe a bit pedantic, but have the order correct as: - const: 3 - const: 2 > + - items: > + - const: 0 > + - const: 1 > + - const: 2 > + - const: 3 > + > + mode-switch: > + type: boolean > + description: Register this node as a Type-C mode switch or not. Same as the anx7625 patch, I would reword this as "Serves as Type-C mode switch if present". ChenYu > + > + required: > + - reg > + - remote-endpoint > > required: > - port@0 > @@ -102,7 +129,6 @@ required: > - pwr18-supply > - interrupts > - reset-gpios > - - extcon > - ports > > additionalProperties: false > @@ -139,8 +165,11 @@ examples: > }; > > port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > reg = <1>; > - it6505_out: endpoint { > + it6505_out: endpoint@0 { > + reg = <0>; > remote-endpoint = <&dp_in>; > data-lanes = <0 1>; > }; > @@ -148,3 +177,49 @@ examples: > }; > }; > }; > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + dp-bridge@5c { > + compatible = "ite,it6505"; > + interrupts = <8 IRQ_TYPE_LEVEL_LOW 8 0>; > + reg = <0x5c>; > + pinctrl-names = "default"; > + pinctrl-0 = <&it6505_pins>; > + ovdd-supply = <&mt6366_vsim2_reg>; > + pwr18-supply = <&pp1800_dpbrdg_dx>; > + reset-gpios = <&pio 177 0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + it6505_dpi_in: endpoint { > + remote-endpoint = <&dpi_out>; > + }; > + }; > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + ite_typec0: endpoint@0 { > + reg = <0>; > + mode-switch; > + data-lanes = <0 1>; > + remote-endpoint = <&typec_port0>; > + }; > + ite_typec1: endpoint@1 { > + reg = <1>; > + mode-switch; > + data-lanes = <2 3>; > + remote-endpoint = <&typec_port1>; > + }; > + }; > + }; > + }; > + }; > -- > 2.39.1.519.gcb327c4b5f-goog >
On Sat, Feb 04, 2023 at 09:30:38PM +0800, Pin-yen Lin wrote: > ITE IT6505 can be used in systems to switch the DP traffic between > two downstreams, which can be USB Type-C DisplayPort alternate mode > lane or regular DisplayPort output ports. > > Update the binding to accommodate this usage by introducing a > data-lanes and a mode-switch property on endpoints. > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > --- > > Changes in v11: > - Updated the description of the endpoints in the bindings > - Referenced video-interfaces.yaml instead for the endpoints binding > - Removed duplicated definitions from inherited schema > > Changes in v9: > - Fixed subject prefix again > - Changed the naming of the example node for it6505 > > Changes in v8: > - Updated bindings for data-lanes property > - Fixed subject prefix > > Changes in v7: > - Fixed issues reported by dt_binding_check. > - Updated the schema and the example dts for data-lanes. > - Changed to generic naming for the example dts node. > > Changes in v6: > - Remove switches node and use endpoints and data-lanes property to > describe the connections. > > .../bindings/display/bridge/ite,it6505.yaml | 101 +++++++++++++++--- > 1 file changed, 88 insertions(+), 13 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > index b16a9d9127dd..8ae9c5cba22c 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > @@ -75,22 +75,49 @@ properties: > port@1: > $ref: /schemas/graph.yaml#/$defs/port-base > unevaluatedProperties: false > - description: Video port for DP output > + description: > + Video port for DP output. Each endpoint connects to a video output > + downstream, and the "data-lanes" property is used to describe the pin > + connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3, > + respectively. > > - properties: > - endpoint: > - $ref: /schemas/graph.yaml#/$defs/endpoint-base > + > + patternProperties: > + "^endpoint@[01]$": > + $ref: /schemas/media/video-interfaces.yaml# > unevaluatedProperties: false > > properties: > + reg: true > + > + remote-endpoint: true > + > data-lanes: > - minItems: 1 > - uniqueItems: true > - items: > - - enum: [ 0, 1 ] > - - const: 1 > - - const: 2 > - - const: 3 > + oneOf: > + - items: > + - enum: [0, 1, 2, 3] > + > + - items: > + - const: 0 > + - const: 1 > + > + - items: > + - const: 2 > + - const: 3 > + > + - items: > + - const: 0 > + - const: 1 > + - const: 2 > + - const: 3 > + > + mode-switch: > + type: boolean > + description: Register this node as a Type-C mode switch or not. Existing users put this property in the device's node, not the endpoint. That seems more like a property of the device, than the DP link. You are using fwnode_typec_mux_get(), right? Rob
Hi Rob, Thanks for the review. On Wed, Feb 8, 2023 at 4:52 AM Rob Herring <robh@kernel.org> wrote: > > On Sat, Feb 04, 2023 at 09:30:38PM +0800, Pin-yen Lin wrote: > > ITE IT6505 can be used in systems to switch the DP traffic between > > two downstreams, which can be USB Type-C DisplayPort alternate mode > > lane or regular DisplayPort output ports. > > > > Update the binding to accommodate this usage by introducing a > > data-lanes and a mode-switch property on endpoints. > > > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > > > --- > > > > Changes in v11: > > - Updated the description of the endpoints in the bindings > > - Referenced video-interfaces.yaml instead for the endpoints binding > > - Removed duplicated definitions from inherited schema > > > > Changes in v9: > > - Fixed subject prefix again > > - Changed the naming of the example node for it6505 > > > > Changes in v8: > > - Updated bindings for data-lanes property > > - Fixed subject prefix > > > > Changes in v7: > > - Fixed issues reported by dt_binding_check. > > - Updated the schema and the example dts for data-lanes. > > - Changed to generic naming for the example dts node. > > > > Changes in v6: > > - Remove switches node and use endpoints and data-lanes property to > > describe the connections. > > > > .../bindings/display/bridge/ite,it6505.yaml | 101 +++++++++++++++--- > > 1 file changed, 88 insertions(+), 13 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > index b16a9d9127dd..8ae9c5cba22c 100644 > > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > @@ -75,22 +75,49 @@ properties: > > port@1: > > $ref: /schemas/graph.yaml#/$defs/port-base > > unevaluatedProperties: false > > - description: Video port for DP output > > + description: > > + Video port for DP output. Each endpoint connects to a video output > > + downstream, and the "data-lanes" property is used to describe the pin > > + connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3, > > + respectively. > > > > - properties: > > - endpoint: > > - $ref: /schemas/graph.yaml#/$defs/endpoint-base > > + > > + patternProperties: > > + "^endpoint@[01]$": > > + $ref: /schemas/media/video-interfaces.yaml# > > unevaluatedProperties: false > > > > properties: > > + reg: true > > + > > + remote-endpoint: true > > + > > data-lanes: > > - minItems: 1 > > - uniqueItems: true > > - items: > > - - enum: [ 0, 1 ] > > - - const: 1 > > - - const: 2 > > - - const: 3 > > + oneOf: > > + - items: > > + - enum: [0, 1, 2, 3] > > + > > + - items: > > + - const: 0 > > + - const: 1 > > + > > + - items: > > + - const: 2 > > + - const: 3 > > + > > + - items: > > + - const: 0 > > + - const: 1 > > + - const: 2 > > + - const: 3 > > + > > + mode-switch: > > + type: boolean > > + description: Register this node as a Type-C mode switch or not. > > Existing users put this property in the device's node, not the endpoint. > That seems more like a property of the device, than the DP link. In our use case, we want to register two mode switches for the same device. That's why we put the "mode-switch" property in the endpoints instead of the device node. > > You are using fwnode_typec_mux_get(), right? Yes. This is called by cros_ec_typec.c[1] in our use case. [1]: https://elixir.bootlin.com/linux/latest/source/drivers/platform/chrome/cros_ec_typec.c#L148 Regards, Pin-yen > > Rob
On Wed, Feb 8, 2023 at 10:00 PM Pin-yen Lin <treapking@chromium.org> wrote: > > Hi Rob, > > Thanks for the review. > > On Wed, Feb 8, 2023 at 4:52 AM Rob Herring <robh@kernel.org> wrote: > > > > On Sat, Feb 04, 2023 at 09:30:38PM +0800, Pin-yen Lin wrote: > > > ITE IT6505 can be used in systems to switch the DP traffic between > > > two downstreams, which can be USB Type-C DisplayPort alternate mode > > > lane or regular DisplayPort output ports. > > > > > > Update the binding to accommodate this usage by introducing a > > > data-lanes and a mode-switch property on endpoints. > > > > > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > > > > > --- > > > > > > Changes in v11: > > > - Updated the description of the endpoints in the bindings > > > - Referenced video-interfaces.yaml instead for the endpoints binding > > > - Removed duplicated definitions from inherited schema > > > > > > Changes in v9: > > > - Fixed subject prefix again > > > - Changed the naming of the example node for it6505 > > > > > > Changes in v8: > > > - Updated bindings for data-lanes property > > > - Fixed subject prefix > > > > > > Changes in v7: > > > - Fixed issues reported by dt_binding_check. > > > - Updated the schema and the example dts for data-lanes. > > > - Changed to generic naming for the example dts node. > > > > > > Changes in v6: > > > - Remove switches node and use endpoints and data-lanes property to > > > describe the connections. > > > > > > .../bindings/display/bridge/ite,it6505.yaml | 101 +++++++++++++++--- > > > 1 file changed, 88 insertions(+), 13 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > > index b16a9d9127dd..8ae9c5cba22c 100644 > > > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > > @@ -75,22 +75,49 @@ properties: > > > port@1: > > > $ref: /schemas/graph.yaml#/$defs/port-base > > > unevaluatedProperties: false > > > - description: Video port for DP output > > > + description: > > > + Video port for DP output. Each endpoint connects to a video output > > > + downstream, and the "data-lanes" property is used to describe the pin > > > + connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3, > > > + respectively. > > > > > > - properties: > > > - endpoint: > > > - $ref: /schemas/graph.yaml#/$defs/endpoint-base > > > + > > > + patternProperties: > > > + "^endpoint@[01]$": > > > + $ref: /schemas/media/video-interfaces.yaml# > > > unevaluatedProperties: false > > > > > > properties: > > > + reg: true > > > + > > > + remote-endpoint: true > > > + > > > data-lanes: > > > - minItems: 1 > > > - uniqueItems: true > > > - items: > > > - - enum: [ 0, 1 ] > > > - - const: 1 > > > - - const: 2 > > > - - const: 3 > > > + oneOf: > > > + - items: > > > + - enum: [0, 1, 2, 3] > > > + > > > + - items: > > > + - const: 0 > > > + - const: 1 > > > + > > > + - items: > > > + - const: 2 > > > + - const: 3 > > > + > > > + - items: > > > + - const: 0 > > > + - const: 1 > > > + - const: 2 > > > + - const: 3 > > > + > > > + mode-switch: > > > + type: boolean > > > + description: Register this node as a Type-C mode switch or not. > > > > Existing users put this property in the device's node, not the endpoint. > > That seems more like a property of the device, than the DP link. > > In our use case, we want to register two mode switches for the same > device. That's why we put the "mode-switch" property in the endpoints > instead of the device node. Then do that. Register a mode switch for each endpoint connected to a USB-C connector. You can walk the graph to see what type of connector. The only way I could see this as an issue is you have 2 USB-C connectors and one is a mode switch and one is not. Not sure if such a scenario is likely or possible. If it is, please educate me. > > You are using fwnode_typec_mux_get(), right? > > Yes. This is called by cros_ec_typec.c[1] in our use case. That code looks for 'mode-switch' in the device's node, not the endpoint. So how does it work for you? Rob
On Thu, Feb 9, 2023 at 9:58 PM Rob Herring <robh@kernel.org> wrote: > > On Wed, Feb 8, 2023 at 10:00 PM Pin-yen Lin <treapking@chromium.org> wrote: > > > > Hi Rob, > > > > Thanks for the review. > > > > On Wed, Feb 8, 2023 at 4:52 AM Rob Herring <robh@kernel.org> wrote: > > > > > > On Sat, Feb 04, 2023 at 09:30:38PM +0800, Pin-yen Lin wrote: > > > > ITE IT6505 can be used in systems to switch the DP traffic between > > > > two downstreams, which can be USB Type-C DisplayPort alternate mode > > > > lane or regular DisplayPort output ports. > > > > > > > > Update the binding to accommodate this usage by introducing a > > > > data-lanes and a mode-switch property on endpoints. > > > > > > > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > > > > > > > --- > > > > > > > > Changes in v11: > > > > - Updated the description of the endpoints in the bindings > > > > - Referenced video-interfaces.yaml instead for the endpoints binding > > > > - Removed duplicated definitions from inherited schema > > > > > > > > Changes in v9: > > > > - Fixed subject prefix again > > > > - Changed the naming of the example node for it6505 > > > > > > > > Changes in v8: > > > > - Updated bindings for data-lanes property > > > > - Fixed subject prefix > > > > > > > > Changes in v7: > > > > - Fixed issues reported by dt_binding_check. > > > > - Updated the schema and the example dts for data-lanes. > > > > - Changed to generic naming for the example dts node. > > > > > > > > Changes in v6: > > > > - Remove switches node and use endpoints and data-lanes property to > > > > describe the connections. > > > > > > > > .../bindings/display/bridge/ite,it6505.yaml | 101 +++++++++++++++--- > > > > 1 file changed, 88 insertions(+), 13 deletions(-) > > > > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > > > index b16a9d9127dd..8ae9c5cba22c 100644 > > > > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > > > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > > > > @@ -75,22 +75,49 @@ properties: > > > > port@1: > > > > $ref: /schemas/graph.yaml#/$defs/port-base > > > > unevaluatedProperties: false > > > > - description: Video port for DP output > > > > + description: > > > > + Video port for DP output. Each endpoint connects to a video output > > > > + downstream, and the "data-lanes" property is used to describe the pin > > > > + connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3, > > > > + respectively. > > > > > > > > - properties: > > > > - endpoint: > > > > - $ref: /schemas/graph.yaml#/$defs/endpoint-base > > > > + > > > > + patternProperties: > > > > + "^endpoint@[01]$": > > > > + $ref: /schemas/media/video-interfaces.yaml# > > > > unevaluatedProperties: false > > > > > > > > properties: > > > > + reg: true > > > > + > > > > + remote-endpoint: true > > > > + > > > > data-lanes: > > > > - minItems: 1 > > > > - uniqueItems: true > > > > - items: > > > > - - enum: [ 0, 1 ] > > > > - - const: 1 > > > > - - const: 2 > > > > - - const: 3 > > > > + oneOf: > > > > + - items: > > > > + - enum: [0, 1, 2, 3] > > > > + > > > > + - items: > > > > + - const: 0 > > > > + - const: 1 > > > > + > > > > + - items: > > > > + - const: 2 > > > > + - const: 3 > > > > + > > > > + - items: > > > > + - const: 0 > > > > + - const: 1 > > > > + - const: 2 > > > > + - const: 3 > > > > + > > > > + mode-switch: > > > > + type: boolean > > > > + description: Register this node as a Type-C mode switch or not. > > > > > > Existing users put this property in the device's node, not the endpoint. > > > That seems more like a property of the device, than the DP link. > > > > In our use case, we want to register two mode switches for the same > > device. That's why we put the "mode-switch" property in the endpoints > > instead of the device node. > > Then do that. Register a mode switch for each endpoint connected to a > USB-C connector. You can walk the graph to see what type of connector. > > The only way I could see this as an issue is you have 2 USB-C > connectors and one is a mode switch and one is not. Not sure if such a > scenario is likely or possible. If it is, please educate me. We can know which endpoints should be registered as a MUX by walking through the graph, but the typec_mux_match[1] checks if the node explicitly specifies a "mode-switch" property. So we still have to put the property in the endpoints. [1]: https://elixir.bootlin.com/linux/latest/source/drivers/usb/typec/mux.c#L265 > > > > You are using fwnode_typec_mux_get(), right? > > > > Yes. This is called by cros_ec_typec.c[1] in our use case. > > That code looks for 'mode-switch' in the device's node, not the > endpoint. So how does it work for you? We modified the function in patch 1/9 of this series to make it also look for endpoints. > > Rob Regards, Pin-yen
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index b16a9d9127dd..8ae9c5cba22c 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -75,22 +75,49 @@ properties: port@1: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false - description: Video port for DP output + description: + Video port for DP output. Each endpoint connects to a video output + downstream, and the "data-lanes" property is used to describe the pin + connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3, + respectively. - properties: - endpoint: - $ref: /schemas/graph.yaml#/$defs/endpoint-base + + patternProperties: + "^endpoint@[01]$": + $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false properties: + reg: true + + remote-endpoint: true + data-lanes: - minItems: 1 - uniqueItems: true - items: - - enum: [ 0, 1 ] - - const: 1 - - const: 2 - - const: 3 + oneOf: + - items: + - enum: [0, 1, 2, 3] + + - items: + - const: 0 + - const: 1 + + - items: + - const: 2 + - const: 3 + + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + + mode-switch: + type: boolean + description: Register this node as a Type-C mode switch or not. + + required: + - reg + - remote-endpoint required: - port@0 @@ -102,7 +129,6 @@ required: - pwr18-supply - interrupts - reset-gpios - - extcon - ports additionalProperties: false @@ -139,8 +165,11 @@ examples: }; port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - it6505_out: endpoint { + it6505_out: endpoint@0 { + reg = <0>; remote-endpoint = <&dp_in>; data-lanes = <0 1>; }; @@ -148,3 +177,49 @@ examples: }; }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dp-bridge@5c { + compatible = "ite,it6505"; + interrupts = <8 IRQ_TYPE_LEVEL_LOW 8 0>; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + ovdd-supply = <&mt6366_vsim2_reg>; + pwr18-supply = <&pp1800_dpbrdg_dx>; + reset-gpios = <&pio 177 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + it6505_dpi_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + ite_typec0: endpoint@0 { + reg = <0>; + mode-switch; + data-lanes = <0 1>; + remote-endpoint = <&typec_port0>; + }; + ite_typec1: endpoint@1 { + reg = <1>; + mode-switch; + data-lanes = <2 3>; + remote-endpoint = <&typec_port1>; + }; + }; + }; + }; + };
ITE IT6505 can be used in systems to switch the DP traffic between two downstreams, which can be USB Type-C DisplayPort alternate mode lane or regular DisplayPort output ports. Update the binding to accommodate this usage by introducing a data-lanes and a mode-switch property on endpoints. Signed-off-by: Pin-yen Lin <treapking@chromium.org> --- Changes in v11: - Updated the description of the endpoints in the bindings - Referenced video-interfaces.yaml instead for the endpoints binding - Removed duplicated definitions from inherited schema Changes in v9: - Fixed subject prefix again - Changed the naming of the example node for it6505 Changes in v8: - Updated bindings for data-lanes property - Fixed subject prefix Changes in v7: - Fixed issues reported by dt_binding_check. - Updated the schema and the example dts for data-lanes. - Changed to generic naming for the example dts node. Changes in v6: - Remove switches node and use endpoints and data-lanes property to describe the connections. .../bindings/display/bridge/ite,it6505.yaml | 101 +++++++++++++++--- 1 file changed, 88 insertions(+), 13 deletions(-)