| Message ID | 20230130-topic-sm8450-upstream-pmic-glink-v2-10-71fea256474f@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soc: qcom: add UCSI function to PMIC GLINK | expand |
On 10.02.2023 16:02, Neil Armstrong wrote: > Add the pmic glink node linked with the DWC3 USB controller > switched to OTG mode and tagged with usb-role-switch. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 45 ++++++++++++++++++++++++++++++++- > 1 file changed, 44 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > index 5db6e789e6b8..7b880cb7e022 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > @@ -27,6 +27,40 @@ chosen { > stdout-path = "serial0:115200n8"; > }; > > + pmic-glink { > + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_hs_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_ss>; > + }; > + }; > + }; > + }; > + }; > + > vph_pwr: vph-pwr-regulator { > compatible = "regulator-fixed"; > regulator-name = "vph_pwr"; > @@ -546,7 +580,16 @@ &usb_1 { > }; > > &usb_1_dwc3 { > - dr_mode = "peripheral"; > + dr_mode = "otg"; > + usb-role-switch; > +}; > + > +&usb_1_dwc3_hs { > + remote-endpoint = <&pmic_glink_hs_in>; > +}; > + > +&usb_1_dwc3_ss { > + remote-endpoint = <&pmic_glink_ss_in>; > }; > > &usb_1_hsphy { >
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 5db6e789e6b8..7b880cb7e022 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -27,6 +27,40 @@ chosen { stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -546,7 +580,16 @@ &usb_1 { }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy {
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 45 ++++++++++++++++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-)