| Message ID | 20230213-fp4-more-i2c-v1-1-5be09dbb5ce6@fairphone.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable remaining I2C busses on sm7225-fairphone-fp4 | expand |
On 13.02.2023 14:26, Luca Weiss wrote: > Currently the dts contains a mix of status-as-first-property (old qcom > style) and status-as-last-property (new style). > > Move all status properties down to the bottom once and for all so that > the style is consistent between different nodes. > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 34 +++++++++++------------ > 1 file changed, 17 insertions(+), 17 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts > index f7602e93121a..86114dd2c0c4 100644 > --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts > +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts > @@ -110,8 +110,8 @@ active-config0 { > }; > > &adsp { > - status = "okay"; > firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; > + status = "okay"; > }; > > &apps_rsc { > @@ -355,13 +355,13 @@ &cci1_i2c0 { > }; > > &cdsp { > - status = "okay"; > firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; > + status = "okay"; > }; > > &i2c10 { > - status = "okay"; > clock-frequency = <400000>; > + status = "okay"; > > haptics@5a { > compatible = "awinic,aw8695"; > @@ -396,8 +396,8 @@ &ipa { > }; > > &mpss { > - status = "okay"; > firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; > + status = "okay"; > }; > > &pm6150l_flash { > @@ -423,11 +423,11 @@ led-1 { > }; > > &pm6150l_wled { > - status = "okay"; > - > qcom,switching-freq = <800>; > qcom,current-limit-microamp = <20000>; > qcom,num-strings = <2>; > + > + status = "okay"; > }; > > &pm6350_gpios { > @@ -441,8 +441,8 @@ gpio_keys_pin: gpio-keys-state { > }; > > &pm6350_resin { > - status = "okay"; > linux,code = <KEY_VOLUMEDOWN>; > + status = "okay"; > }; > > &pm7250b_adc { > @@ -535,21 +535,21 @@ &uart9 { > }; > > &ufs_mem_hc { > - status = "okay"; > - > reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; > > vcc-supply = <&vreg_l7e>; > vcc-max-microamp = <800000>; > vccq2-supply = <&vreg_l12a>; > vccq2-max-microamp = <800000>; > + > + status = "okay"; > }; > > &ufs_mem_phy { > - status = "okay"; > - > vdda-phy-supply = <&vreg_l18a>; > vdda-pll-supply = <&vreg_l22a>; > + > + status = "okay"; > }; > > &usb_1 { > @@ -562,26 +562,26 @@ &usb_1_dwc3 { > }; > > &usb_1_hsphy { > - status = "okay"; > - > vdd-supply = <&vreg_l18a>; > vdda-pll-supply = <&vreg_l2a>; > vdda-phy-dpdm-supply = <&vreg_l3a>; > + > + status = "okay"; > }; > > &usb_1_qmpphy { > - status = "okay"; > - > vdda-phy-supply = <&vreg_l22a>; > vdda-pll-supply = <&vreg_l16a>; > + > + status = "okay"; > }; > > &wifi { > - status = "okay"; > - > vdd-0.8-cx-mx-supply = <&vreg_l4a>; > vdd-1.8-xo-supply = <&vreg_l7a>; > vdd-1.3-rfa-supply = <&vreg_l2e>; > vdd-3.3-ch0-supply = <&vreg_l10e>; > vdd-3.3-ch1-supply = <&vreg_l11e>; > + > + status = "okay"; > }; >
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index f7602e93121a..86114dd2c0c4 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -110,8 +110,8 @@ active-config0 { }; &adsp { - status = "okay"; firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; + status = "okay"; }; &apps_rsc { @@ -355,13 +355,13 @@ &cci1_i2c0 { }; &cdsp { - status = "okay"; firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; + status = "okay"; }; &i2c10 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; haptics@5a { compatible = "awinic,aw8695"; @@ -396,8 +396,8 @@ &ipa { }; &mpss { - status = "okay"; firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; + status = "okay"; }; &pm6150l_flash { @@ -423,11 +423,11 @@ led-1 { }; &pm6150l_wled { - status = "okay"; - qcom,switching-freq = <800>; qcom,current-limit-microamp = <20000>; qcom,num-strings = <2>; + + status = "okay"; }; &pm6350_gpios { @@ -441,8 +441,8 @@ gpio_keys_pin: gpio-keys-state { }; &pm6350_resin { - status = "okay"; linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pm7250b_adc { @@ -535,21 +535,21 @@ &uart9 { }; &ufs_mem_hc { - status = "okay"; - reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l7e>; vcc-max-microamp = <800000>; vccq2-supply = <&vreg_l12a>; vccq2-max-microamp = <800000>; + + status = "okay"; }; &ufs_mem_phy { - status = "okay"; - vdda-phy-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l22a>; + + status = "okay"; }; &usb_1 { @@ -562,26 +562,26 @@ &usb_1_dwc3 { }; &usb_1_hsphy { - status = "okay"; - vdd-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l2a>; vdda-phy-dpdm-supply = <&vreg_l3a>; + + status = "okay"; }; &usb_1_qmpphy { - status = "okay"; - vdda-phy-supply = <&vreg_l22a>; vdda-pll-supply = <&vreg_l16a>; + + status = "okay"; }; &wifi { - status = "okay"; - vdd-0.8-cx-mx-supply = <&vreg_l4a>; vdd-1.8-xo-supply = <&vreg_l7a>; vdd-1.3-rfa-supply = <&vreg_l2e>; vdd-3.3-ch0-supply = <&vreg_l10e>; vdd-3.3-ch1-supply = <&vreg_l11e>; + + status = "okay"; };
Currently the dts contains a mix of status-as-first-property (old qcom style) and status-as-last-property (new style). Move all status properties down to the bottom once and for all so that the style is consistent between different nodes. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 34 +++++++++++------------ 1 file changed, 17 insertions(+), 17 deletions(-)