| Message ID | 20230213120926.8166-1-francesco@dolcini.it (mailing list archive) |
|---|---|
| Headers | show |
| Series | Bluetooth: hci_mrvl: Add serdev support for 88W8997 | expand |
Hi Francesco, On Mon, Feb 13, 2023 at 4:09 AM Francesco Dolcini <francesco@dolcini.it> wrote: > > From: Francesco Dolcini <francesco.dolcini@toradex.com> > > Add serdev support for the 88W8997 from NXP (previously Marvell). It includes > support for changing the baud rate. The command to change the baud rate is > taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth > interfaces) from NXP. > > v3: > - Use __hci_cmd_sync_status instead of __hci_cmd_sync > > v2: > - Fix the subject as pointed out by Krzysztof. Thanks! > - Fix indentation in marvell-bluetooth.yaml > - Fix compiler warning for kernel builds without CONFIG_OF enabled > > Stefan Eichenberger (5): > dt-bindings: bluetooth: marvell: add 88W8997 > dt-bindings: bluetooth: marvell: add max-speed property > Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids > Bluetooth: hci_mrvl: Add serdev support for 88W8997 > arm64: dts: imx8mp-verdin: add 88W8997 serdev to uart4 > > .../bindings/net/marvell-bluetooth.yaml | 20 ++++- > .../dts/freescale/imx8mp-verdin-wifi.dtsi | 5 ++ > drivers/bluetooth/hci_mrvl.c | 90 ++++++++++++++++--- > 3 files changed, 104 insertions(+), 11 deletions(-) > > -- > 2.25.1 There seems to be missing one patch 5/5: https://patchwork.kernel.org/project/bluetooth/list/?series=721269 Other than that the Bluetooth parts seem fine, and perhaps can be merged if the patch above is not really required.
Hello Luiz On Wed, Feb 15, 2023 at 12:36:34PM -0800, Luiz Augusto von Dentz wrote: > On Mon, Feb 13, 2023 at 4:09 AM Francesco Dolcini <francesco@dolcini.it> wrote: > > > > From: Francesco Dolcini <francesco.dolcini@toradex.com> > > > > Add serdev support for the 88W8997 from NXP (previously Marvell). It includes > > support for changing the baud rate. The command to change the baud rate is > > taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth > > interfaces) from NXP. > > > > v3: > > - Use __hci_cmd_sync_status instead of __hci_cmd_sync > > > > v2: > > - Fix the subject as pointed out by Krzysztof. Thanks! > > - Fix indentation in marvell-bluetooth.yaml > > - Fix compiler warning for kernel builds without CONFIG_OF enabled > > > > Stefan Eichenberger (5): > > dt-bindings: bluetooth: marvell: add 88W8997 > > dt-bindings: bluetooth: marvell: add max-speed property > > Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids > > Bluetooth: hci_mrvl: Add serdev support for 88W8997 > > arm64: dts: imx8mp-verdin: add 88W8997 serdev to uart4 > > > > .../bindings/net/marvell-bluetooth.yaml | 20 ++++- > > .../dts/freescale/imx8mp-verdin-wifi.dtsi | 5 ++ > > drivers/bluetooth/hci_mrvl.c | 90 ++++++++++++++++--- > > 3 files changed, 104 insertions(+), 11 deletions(-) > > > > -- > > 2.25.1 > > There seems to be missing one patch 5/5: > > https://patchwork.kernel.org/project/bluetooth/list/?series=721269 > > Other than that the Bluetooth parts seem fine, and perhaps can be > merged if the patch above is not really required. In v3 I decided to not send it to the BT mailing list, since this is supposed to go through Shawn and the iMX/SOC tree. Given that it would be great if you could apply patches 1-4. Thanks, Francesco
Hello: This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>: On Mon, 13 Feb 2023 13:09:21 +0100 you wrote: > From: Francesco Dolcini <francesco.dolcini@toradex.com> > > Add serdev support for the 88W8997 from NXP (previously Marvell). It includes > support for changing the baud rate. The command to change the baud rate is > taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth > interfaces) from NXP. > > [...] Here is the summary with links: - [v3,1/5] dt-bindings: bluetooth: marvell: add 88W8997 https://git.kernel.org/bluetooth/bluetooth-next/c/f48823aa0c4f - [v3,2/5] dt-bindings: bluetooth: marvell: add max-speed property https://git.kernel.org/bluetooth/bluetooth-next/c/d7303dce9fcb - [v3,3/5] Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids https://git.kernel.org/bluetooth/bluetooth-next/c/e275614465ec - [v3,4/5] Bluetooth: hci_mrvl: Add serdev support for 88W8997 https://git.kernel.org/bluetooth/bluetooth-next/c/58c6156a4d4b You are awesome, thank you!
From: Francesco Dolcini <francesco.dolcini@toradex.com> Add serdev support for the 88W8997 from NXP (previously Marvell). It includes support for changing the baud rate. The command to change the baud rate is taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth interfaces) from NXP. v3: - Use __hci_cmd_sync_status instead of __hci_cmd_sync v2: - Fix the subject as pointed out by Krzysztof. Thanks! - Fix indentation in marvell-bluetooth.yaml - Fix compiler warning for kernel builds without CONFIG_OF enabled Stefan Eichenberger (5): dt-bindings: bluetooth: marvell: add 88W8997 dt-bindings: bluetooth: marvell: add max-speed property Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids Bluetooth: hci_mrvl: Add serdev support for 88W8997 arm64: dts: imx8mp-verdin: add 88W8997 serdev to uart4 .../bindings/net/marvell-bluetooth.yaml | 20 ++++- .../dts/freescale/imx8mp-verdin-wifi.dtsi | 5 ++ drivers/bluetooth/hci_mrvl.c | 90 ++++++++++++++++--- 3 files changed, 104 insertions(+), 11 deletions(-)