| Message ID | 20230223132452.37958-1-hadess@hadess.net (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Jiri Kosina |
| Headers | show |
| Series | [1/5] HID: logitech-hidpp: Add support for ADC measurement feature | expand |
On Thu, Feb 23, 2023 at 02:24:48PM +0100, Bastien Nocera wrote: > This is used in a number of headsets to report the voltage of the > battery. > > The voltage to capacity conversion is based on the C implementation > in HeadsetControl. What is "HeadsetControl"? > > Signed-off-by: Bastien Nocera <hadess@hadess.net> > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216483 > --- > drivers/hid/hid-logitech-hidpp.c | 174 ++++++++++++++++++++++++++++++- > 1 file changed, 172 insertions(+), 2 deletions(-) > > diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c > index ff1fcebf2ec7..f6365cdf2e21 100644 > --- a/drivers/hid/hid-logitech-hidpp.c > +++ b/drivers/hid/hid-logitech-hidpp.c > @@ -94,6 +94,7 @@ MODULE_PARM_DESC(disable_tap_to_click, > #define HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL BIT(7) > #define HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL BIT(8) > #define HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL BIT(9) > +#define HIDPP_CAPABILITY_ADC_MEASUREMENT BIT(10) > > #define lg_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c)) > > @@ -145,6 +146,7 @@ struct hidpp_battery { > u8 feature_index; > u8 solar_feature_index; > u8 voltage_feature_index; > + u8 adc_measurement_feature_index; > struct power_supply_desc desc; > struct power_supply *ps; > char name[64]; > @@ -1744,6 +1746,164 @@ static int hidpp_set_wireless_feature_index(struct hidpp_device *hidpp) > return ret; > } > > +/* -------------------------------------------------------------------------- */ > +/* 0x1f20: ADC measurement */ > +/* -------------------------------------------------------------------------- */ > + > +#define HIDPP_PAGE_ADC_MEASUREMENT 0x1f20 > + > +#define CMD_ADC_MEASUREMENT_GET_ADC_MEASUREMENT 0x00 > + > +#define EVENT_ADC_MEASUREMENT_STATUS_BROADCAST 0x00 > + > +static int hidpp20_map_adc_measurement_1f20_capacity(struct hid_device *hid_dev, int voltage) > +{ > + /* NB: This voltage curve doesn't necessarily map perfectly to all > + * devices that implement the ADC_MEASUREMENT feature. This is because > + * there are a few devices that use different battery technology. > + * > + * Adapted from: > + * https://github.com/Sapd/HeadsetControl/blob/acd972be0468e039b93aae81221f20a54d2d60f7/src/devices/logitech_g633_g933_935.c#L44-L52 > + */ > + No need for a blank line. > + static const int voltages[] = { > + 4030, 4024, 4018, 4011, 4003, 3994, 3985, 3975, 3963, 3951, > + 3937, 3922, 3907, 3893, 3880, 3868, 3857, 3846, 3837, 3828, > + 3820, 3812, 3805, 3798, 3791, 3785, 3779, 3773, 3768, 3762, > + 3757, 3752, 3747, 3742, 3738, 3733, 3729, 3724, 3720, 3716, > + 3712, 3708, 3704, 3700, 3696, 3692, 3688, 3685, 3681, 3677, > + 3674, 3670, 3667, 3663, 3660, 3657, 3653, 3650, 3646, 3643, > + 3640, 3637, 3633, 3630, 3627, 3624, 3620, 3617, 3614, 3611, > + 3608, 3604, 3601, 3598, 3595, 3592, 3589, 3585, 3582, 3579, > + 3576, 3573, 3569, 3566, 3563, 3560, 3556, 3553, 3550, 3546, > + 3543, 3539, 3536, 3532, 3529, 3525, 3499, 3466, 3433, 3399, > + }; > + > + int i; > + > + BUILD_BUG_ON(ARRAY_SIZE(voltages) != 100); Why is 100 magic? If you want it to be 100, say so up in the declaraion so that the code will enforce that. > + > + if (voltage == 0) > + return 0; > + > + if (unlikely(voltage < 3400 || voltage >= 5000)) Why unlikely? That should only ever be used if you can measure the performance impact, otherwise please remove it. > + hid_warn_once(hid_dev, > + "%s: possibly using the wrong voltage curve\n", > + __func__); > + > + for (i = 0; i < ARRAY_SIZE(voltages); i++) { > + if (voltage >= voltages[i]) > + return ARRAY_SIZE(voltages) - i; > + } > + > + return 0; > +} > + > +static int hidpp20_map_adc_measurement_1f20(u8 data[3], int *voltage) > +{ > + int status, flags; > + > + flags = (int) data[2]; Why is this now an int? > + > + switch (flags) { > + case 0x01: > + status = POWER_SUPPLY_STATUS_DISCHARGING; > + break; > + case 0x03: > + status = POWER_SUPPLY_STATUS_CHARGING; > + break; > + case 0x07: > + status = POWER_SUPPLY_STATUS_FULL; > + break; > + case 0x0F: > + default: You are only checking it for a range 1-f, u8 is just fine, right? > + status = POWER_SUPPLY_STATUS_UNKNOWN; > + break; > + } > + > + *voltage = get_unaligned_be16(data); > + > + dbg_hid("%s: Parsed 1f20 data as flag 0x%02x voltage %dmV\n", > + __func__, flags, *voltage); I doubt you need the __func__ line, right? dynamic debug provides that for you automatically if you ask for it. thanks, greg k-h
On Thu, 2023-02-23 at 14:56 +0100, Greg Kroah-Hartman wrote: > On Thu, Feb 23, 2023 at 02:24:48PM +0100, Bastien Nocera wrote: > > This is used in a number of headsets to report the voltage of the > > battery. > > > > The voltage to capacity conversion is based on the C implementation > > in HeadsetControl. > > What is "HeadsetControl"? It the software referenced in the comment after which I don't need a blank line, just below this comment ;) > > > > > Signed-off-by: Bastien Nocera <hadess@hadess.net> > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216483 > > --- > > drivers/hid/hid-logitech-hidpp.c | 174 > > ++++++++++++++++++++++++++++++- > > 1 file changed, 172 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid- > > logitech-hidpp.c > > index ff1fcebf2ec7..f6365cdf2e21 100644 > > --- a/drivers/hid/hid-logitech-hidpp.c > > +++ b/drivers/hid/hid-logitech-hidpp.c > > @@ -94,6 +94,7 @@ MODULE_PARM_DESC(disable_tap_to_click, > > #define HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL BIT(7) > > #define HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL BIT(8) > > #define HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL BIT(9) > > +#define HIDPP_CAPABILITY_ADC_MEASUREMENT BIT(10) > > > > #define lg_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, > > max, EV_KEY, (c)) > > > > @@ -145,6 +146,7 @@ struct hidpp_battery { > > u8 feature_index; > > u8 solar_feature_index; > > u8 voltage_feature_index; > > + u8 adc_measurement_feature_index; > > struct power_supply_desc desc; > > struct power_supply *ps; > > char name[64]; > > @@ -1744,6 +1746,164 @@ static int > > hidpp_set_wireless_feature_index(struct hidpp_device *hidpp) > > return ret; > > } > > > > +/* --------------------------------------------------------------- > > ----------- */ > > +/* 0x1f20: ADC > > measurement */ > > +/* --------------------------------------------------------------- > > ----------- */ > > + > > +#define HIDPP_PAGE_ADC_MEASUREMENT 0x1f20 > > + > > +#define CMD_ADC_MEASUREMENT_GET_ADC_MEASUREMENT 0x00 > > + > > +#define EVENT_ADC_MEASUREMENT_STATUS_BROADCAST 0x00 > > + > > +static int hidpp20_map_adc_measurement_1f20_capacity(struct > > hid_device *hid_dev, int voltage) > > +{ > > + /* NB: This voltage curve doesn't necessarily map perfectly > > to all > > + * devices that implement the ADC_MEASUREMENT feature. This > > is because > > + * there are a few devices that use different battery > > technology. > > + * > > + * Adapted from: > > + * > > https://github.com/Sapd/HeadsetControl/blob/acd972be0468e039b93aae81221f20a54d2d60f7/src/devices/logitech_g633_g933_935.c#L44-L52 > > + */ > > + This is the software ^^^^^^^^^^ > No need for a blank line. Sure. > > + static const int voltages[] = { > > + 4030, 4024, 4018, 4011, 4003, 3994, 3985, 3975, > > 3963, 3951, > > + 3937, 3922, 3907, 3893, 3880, 3868, 3857, 3846, > > 3837, 3828, > > + 3820, 3812, 3805, 3798, 3791, 3785, 3779, 3773, > > 3768, 3762, > > + 3757, 3752, 3747, 3742, 3738, 3733, 3729, 3724, > > 3720, 3716, > > + 3712, 3708, 3704, 3700, 3696, 3692, 3688, 3685, > > 3681, 3677, > > + 3674, 3670, 3667, 3663, 3660, 3657, 3653, 3650, > > 3646, 3643, > > + 3640, 3637, 3633, 3630, 3627, 3624, 3620, 3617, > > 3614, 3611, > > + 3608, 3604, 3601, 3598, 3595, 3592, 3589, 3585, > > 3582, 3579, > > + 3576, 3573, 3569, 3566, 3563, 3560, 3556, 3553, > > 3550, 3546, > > + 3543, 3539, 3536, 3532, 3529, 3525, 3499, 3466, > > 3433, 3399, > > + }; > > + > > + int i; > > + > > + BUILD_BUG_ON(ARRAY_SIZE(voltages) != 100); > > Why is 100 magic? If you want it to be 100, say so up in the > declaraion > so that the code will enforce that. It's the same pattern used in hidpp20_map_battery_capacity() in the same file. I'll send a patch to fix that too. > > > + > > + if (voltage == 0) > > + return 0; > > + > > + if (unlikely(voltage < 3400 || voltage >= 5000)) > > Why unlikely? That should only ever be used if you can measure the > performance impact, otherwise please remove it. > > > + hid_warn_once(hid_dev, > > + "%s: possibly using the wrong voltage > > curve\n", > > + __func__); > > + > > + for (i = 0; i < ARRAY_SIZE(voltages); i++) { > > + if (voltage >= voltages[i]) > > + return ARRAY_SIZE(voltages) - i; > > + } > > + > > + return 0; > > +} > > + > > +static int hidpp20_map_adc_measurement_1f20(u8 data[3], int > > *voltage) > > +{ > > + int status, flags; > > + > > + flags = (int) data[2]; > > Why is this now an int? Sure. > > + > > + switch (flags) { > > + case 0x01: > > + status = POWER_SUPPLY_STATUS_DISCHARGING; > > + break; > > + case 0x03: > > + status = POWER_SUPPLY_STATUS_CHARGING; > > + break; > > + case 0x07: > > + status = POWER_SUPPLY_STATUS_FULL; > > + break; > > + case 0x0F: > > + default: > > You are only checking it for a range 1-f, u8 is just fine, right? Sure. > > > + status = POWER_SUPPLY_STATUS_UNKNOWN; > > + break; > > + } > > + > > + *voltage = get_unaligned_be16(data); > > + > > + dbg_hid("%s: Parsed 1f20 data as flag 0x%02x voltage > > %dmV\n", > > + __func__, flags, *voltage); > > I doubt you need the __func__ line, right? dynamic debug provides > that > for you automatically if you ask for it. Removed.
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index ff1fcebf2ec7..f6365cdf2e21 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -94,6 +94,7 @@ MODULE_PARM_DESC(disable_tap_to_click, #define HIDPP_CAPABILITY_HIDPP20_HI_RES_WHEEL BIT(7) #define HIDPP_CAPABILITY_HIDPP20_HI_RES_SCROLL BIT(8) #define HIDPP_CAPABILITY_HIDPP10_FAST_SCROLL BIT(9) +#define HIDPP_CAPABILITY_ADC_MEASUREMENT BIT(10) #define lg_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c)) @@ -145,6 +146,7 @@ struct hidpp_battery { u8 feature_index; u8 solar_feature_index; u8 voltage_feature_index; + u8 adc_measurement_feature_index; struct power_supply_desc desc; struct power_supply *ps; char name[64]; @@ -1744,6 +1746,164 @@ static int hidpp_set_wireless_feature_index(struct hidpp_device *hidpp) return ret; } +/* -------------------------------------------------------------------------- */ +/* 0x1f20: ADC measurement */ +/* -------------------------------------------------------------------------- */ + +#define HIDPP_PAGE_ADC_MEASUREMENT 0x1f20 + +#define CMD_ADC_MEASUREMENT_GET_ADC_MEASUREMENT 0x00 + +#define EVENT_ADC_MEASUREMENT_STATUS_BROADCAST 0x00 + +static int hidpp20_map_adc_measurement_1f20_capacity(struct hid_device *hid_dev, int voltage) +{ + /* NB: This voltage curve doesn't necessarily map perfectly to all + * devices that implement the ADC_MEASUREMENT feature. This is because + * there are a few devices that use different battery technology. + * + * Adapted from: + * https://github.com/Sapd/HeadsetControl/blob/acd972be0468e039b93aae81221f20a54d2d60f7/src/devices/logitech_g633_g933_935.c#L44-L52 + */ + + static const int voltages[] = { + 4030, 4024, 4018, 4011, 4003, 3994, 3985, 3975, 3963, 3951, + 3937, 3922, 3907, 3893, 3880, 3868, 3857, 3846, 3837, 3828, + 3820, 3812, 3805, 3798, 3791, 3785, 3779, 3773, 3768, 3762, + 3757, 3752, 3747, 3742, 3738, 3733, 3729, 3724, 3720, 3716, + 3712, 3708, 3704, 3700, 3696, 3692, 3688, 3685, 3681, 3677, + 3674, 3670, 3667, 3663, 3660, 3657, 3653, 3650, 3646, 3643, + 3640, 3637, 3633, 3630, 3627, 3624, 3620, 3617, 3614, 3611, + 3608, 3604, 3601, 3598, 3595, 3592, 3589, 3585, 3582, 3579, + 3576, 3573, 3569, 3566, 3563, 3560, 3556, 3553, 3550, 3546, + 3543, 3539, 3536, 3532, 3529, 3525, 3499, 3466, 3433, 3399, + }; + + int i; + + BUILD_BUG_ON(ARRAY_SIZE(voltages) != 100); + + if (voltage == 0) + return 0; + + if (unlikely(voltage < 3400 || voltage >= 5000)) + hid_warn_once(hid_dev, + "%s: possibly using the wrong voltage curve\n", + __func__); + + for (i = 0; i < ARRAY_SIZE(voltages); i++) { + if (voltage >= voltages[i]) + return ARRAY_SIZE(voltages) - i; + } + + return 0; +} + +static int hidpp20_map_adc_measurement_1f20(u8 data[3], int *voltage) +{ + int status, flags; + + flags = (int) data[2]; + + switch (flags) { + case 0x01: + status = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case 0x03: + status = POWER_SUPPLY_STATUS_CHARGING; + break; + case 0x07: + status = POWER_SUPPLY_STATUS_FULL; + break; + case 0x0F: + default: + status = POWER_SUPPLY_STATUS_UNKNOWN; + break; + } + + *voltage = get_unaligned_be16(data); + + dbg_hid("%s: Parsed 1f20 data as flag 0x%02x voltage %dmV\n", + __func__, flags, *voltage); + + return status; +} + +/* Return value is whether the device is online */ +static bool hidpp20_get_adc_measurement_1f20(struct hidpp_device *hidpp, + u8 feature_index, + int *status, int *voltage) +{ + struct hidpp_report response; + int ret; + u8 *params = (u8 *)response.fap.params; + + *status = POWER_SUPPLY_STATUS_UNKNOWN; + *voltage = 0; + ret = hidpp_send_fap_command_sync(hidpp, feature_index, + CMD_ADC_MEASUREMENT_GET_ADC_MEASUREMENT, + NULL, 0, &response); + + if (ret > 0) { + hid_dbg(hidpp->hid_dev, "%s: received protocol error 0x%02x\n", + __func__, ret); + return false; + } + + *status = hidpp20_map_adc_measurement_1f20(params, voltage); + return true; +} + +static int hidpp20_query_adc_measurement_info_1f20(struct hidpp_device *hidpp) +{ + u8 feature_type; + + if (hidpp->battery.adc_measurement_feature_index == 0xff) { + int ret; + + ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_ADC_MEASUREMENT, + &hidpp->battery.adc_measurement_feature_index, + &feature_type); + if (ret) + return ret; + + hidpp->capabilities |= HIDPP_CAPABILITY_ADC_MEASUREMENT; + } + + hidpp->battery.online = hidpp20_get_adc_measurement_1f20(hidpp, + hidpp->battery.adc_measurement_feature_index, + &hidpp->battery.status, + &hidpp->battery.voltage); + hidpp->battery.capacity = hidpp20_map_adc_measurement_1f20_capacity(hidpp->hid_dev, + hidpp->battery.voltage); + + return 0; +} + +static int hidpp20_adc_measurement_event_1f20(struct hidpp_device *hidpp, + u8 *data, int size) +{ + struct hidpp_report *report = (struct hidpp_report *)data; + int status, voltage; + + if (report->fap.feature_index != hidpp->battery.adc_measurement_feature_index || + report->fap.funcindex_clientid != EVENT_ADC_MEASUREMENT_STATUS_BROADCAST) + return 0; + + status = hidpp20_map_adc_measurement_1f20(report->fap.params, &voltage); + + hidpp->battery.online = status != POWER_SUPPLY_STATUS_UNKNOWN; + + if (voltage != hidpp->battery.voltage || status != hidpp->battery.status) { + hidpp->battery.status = status; + hidpp->battery.voltage = voltage; + hidpp->battery.capacity = hidpp20_map_adc_measurement_1f20_capacity(hidpp->hid_dev, voltage); + if (hidpp->battery.ps) + power_supply_changed(hidpp->battery.ps); + } + return 0; +} + /* -------------------------------------------------------------------------- */ /* 0x2120: Hi-resolution scrolling */ /* -------------------------------------------------------------------------- */ @@ -3662,6 +3822,9 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data, ret = hidpp20_battery_voltage_event(hidpp, data, size); if (ret != 0) return ret; + ret = hidpp20_adc_measurement_event_1f20(hidpp, data, size); + if (ret != 0) + return ret; } if (hidpp->capabilities & HIDPP_CAPABILITY_HIDPP10_BATTERY) { @@ -3785,6 +3948,7 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp) hidpp->battery.feature_index = 0xff; hidpp->battery.solar_feature_index = 0xff; hidpp->battery.voltage_feature_index = 0xff; + hidpp->battery.adc_measurement_feature_index = 0xff; if (hidpp->protocol_major >= 2) { if (hidpp->quirks & HIDPP_QUIRK_CLASS_K750) @@ -3798,6 +3962,8 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp) ret = hidpp20_query_battery_info_1004(hidpp); if (ret) ret = hidpp20_query_battery_voltage_info(hidpp); + if (ret) + ret = hidpp20_query_adc_measurement_info_1f20(hidpp); } if (ret) @@ -3827,7 +3993,8 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp) if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE || hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_PERCENTAGE || - hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE) + hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE || + hidpp->capabilities & HIDPP_CAPABILITY_ADC_MEASUREMENT) battery_props[num_battery_props++] = POWER_SUPPLY_PROP_CAPACITY; @@ -3835,7 +4002,8 @@ static int hidpp_initialize_battery(struct hidpp_device *hidpp) battery_props[num_battery_props++] = POWER_SUPPLY_PROP_CAPACITY_LEVEL; - if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE) + if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE || + hidpp->capabilities & HIDPP_CAPABILITY_ADC_MEASUREMENT) battery_props[num_battery_props++] = POWER_SUPPLY_PROP_VOLTAGE_NOW; @@ -4008,6 +4176,8 @@ static void hidpp_connect_event(struct hidpp_device *hidpp) hidpp20_query_battery_voltage_info(hidpp); else if (hidpp->capabilities & HIDPP_CAPABILITY_UNIFIED_BATTERY) hidpp20_query_battery_info_1004(hidpp); + else if (hidpp->capabilities & HIDPP_CAPABILITY_ADC_MEASUREMENT) + hidpp20_query_adc_measurement_info_1f20(hidpp); else hidpp20_query_battery_info_1000(hidpp); }
This is used in a number of headsets to report the voltage of the battery. The voltage to capacity conversion is based on the C implementation in HeadsetControl. Signed-off-by: Bastien Nocera <hadess@hadess.net> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216483 --- drivers/hid/hid-logitech-hidpp.c | 174 ++++++++++++++++++++++++++++++- 1 file changed, 172 insertions(+), 2 deletions(-)