| Message ID | 20221213090047.3805-2-victor.shih@genesyslogic.com.tw (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support UHS-II for GL9755 | expand |
On 13/12/22 11:00, Victor Shih wrote: > The current print of the bus speed mode in mmc_add_card() has grown over > the years and is now difficult to parse. Let's clean up the code and also > take the opportunity to properly announce "DDR" for eMMCs as > "high speed DDR", which is according to the eMMC spec. > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > --- > drivers/mmc/core/bus.c | 35 ++++++++++++++++++++--------------- > 1 file changed, 20 insertions(+), 15 deletions(-) > > diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c > index 36679f4e9acc..bbbbdbca5366 100644 > --- a/drivers/mmc/core/bus.c > +++ b/drivers/mmc/core/bus.c > @@ -299,6 +299,7 @@ int mmc_add_card(struct mmc_card *card) > { > int ret; > const char *type; > + const char *speed_mode = ""; > const char *uhs_bus_speed_mode = ""; > static const char *const uhs_speeds[] = { > [UHS_SDR12_BUS_SPEED] = "SDR12 ", > @@ -337,25 +338,29 @@ int mmc_add_card(struct mmc_card *card) > break; > } > > + if (mmc_card_hs(card)) > + speed_mode = "high speed "; > + else if (mmc_card_uhs(card)) > + speed_mode = "ultra high speed "; > + else if (mmc_card_ddr52(card)) > + speed_mode = "high speed DDR "; > + else if (mmc_card_hs200(card)) > + speed_mode = "HS200 "; > + else if (mmc_card_hs400es(card)) > + speed_mode = "HS400 Enhanced strobe "; > + else if (mmc_card_hs400(card)) > + speed_mode = "HS400 "; > + > if (mmc_card_uhs(card) && > (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds))) > uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed]; > > - if (mmc_host_is_spi(card->host)) { > - pr_info("%s: new %s%s%s card on SPI\n", > - mmc_hostname(card->host), > - mmc_card_hs(card) ? "high speed " : "", > - mmc_card_ddr52(card) ? "DDR " : "", > - type); > - } else { > - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", > - mmc_hostname(card->host), > - mmc_card_uhs(card) ? "ultra high speed " : > - (mmc_card_hs(card) ? "high speed " : ""), > - mmc_card_hs400(card) ? "HS400 " : > - (mmc_card_hs200(card) ? "HS200 " : ""), > - mmc_card_hs400es(card) ? "Enhanced strobe " : "", > - mmc_card_ddr52(card) ? "DDR " : "", > + if (mmc_host_is_spi(card->host)) > + pr_info("%s: new %s%s card on SPI\n", > + mmc_hostname(card->host), speed_mode, type); > + else { This bracket wasn't in V5. Brackets should be on both branches of the if-clause or neither. > + pr_info("%s: new %s%s%s card at address %04x\n", > + mmc_hostname(card->host), speed_mode, > uhs_bus_speed_mode, type, card->rca); > } >
Hi, Adrian On Fri, Jan 6, 2023 at 5:22 AM Adrian Hunter <adrian.hunter@intel.com> wrote: > > On 13/12/22 11:00, Victor Shih wrote: > > The current print of the bus speed mode in mmc_add_card() has grown over > > the years and is now difficult to parse. Let's clean up the code and also > > take the opportunity to properly announce "DDR" for eMMCs as > > "high speed DDR", which is according to the eMMC spec. > > > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> > > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> > > --- > > drivers/mmc/core/bus.c | 35 ++++++++++++++++++++--------------- > > 1 file changed, 20 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c > > index 36679f4e9acc..bbbbdbca5366 100644 > > --- a/drivers/mmc/core/bus.c > > +++ b/drivers/mmc/core/bus.c > > @@ -299,6 +299,7 @@ int mmc_add_card(struct mmc_card *card) > > { > > int ret; > > const char *type; > > + const char *speed_mode = ""; > > const char *uhs_bus_speed_mode = ""; > > static const char *const uhs_speeds[] = { > > [UHS_SDR12_BUS_SPEED] = "SDR12 ", > > @@ -337,25 +338,29 @@ int mmc_add_card(struct mmc_card *card) > > break; > > } > > > > + if (mmc_card_hs(card)) > > + speed_mode = "high speed "; > > + else if (mmc_card_uhs(card)) > > + speed_mode = "ultra high speed "; > > + else if (mmc_card_ddr52(card)) > > + speed_mode = "high speed DDR "; > > + else if (mmc_card_hs200(card)) > > + speed_mode = "HS200 "; > > + else if (mmc_card_hs400es(card)) > > + speed_mode = "HS400 Enhanced strobe "; > > + else if (mmc_card_hs400(card)) > > + speed_mode = "HS400 "; > > + > > if (mmc_card_uhs(card) && > > (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds))) > > uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed]; > > > > - if (mmc_host_is_spi(card->host)) { > > - pr_info("%s: new %s%s%s card on SPI\n", > > - mmc_hostname(card->host), > > - mmc_card_hs(card) ? "high speed " : "", > > - mmc_card_ddr52(card) ? "DDR " : "", > > - type); > > - } else { > > - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", > > - mmc_hostname(card->host), > > - mmc_card_uhs(card) ? "ultra high speed " : > > - (mmc_card_hs(card) ? "high speed " : ""), > > - mmc_card_hs400(card) ? "HS400 " : > > - (mmc_card_hs200(card) ? "HS200 " : ""), > > - mmc_card_hs400es(card) ? "Enhanced strobe " : "", > > - mmc_card_ddr52(card) ? "DDR " : "", > > + if (mmc_host_is_spi(card->host)) > > + pr_info("%s: new %s%s card on SPI\n", > > + mmc_hostname(card->host), speed_mode, type); > > + else { > > This bracket wasn't in V5. Brackets should be on both > branches of the if-clause or neither. > I will update it in V7 version. > > + pr_info("%s: new %s%s%s card at address %04x\n", > > + mmc_hostname(card->host), speed_mode, > > uhs_bus_speed_mode, type, card->rca); > > } > > > Thanks, Victor Shih
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 36679f4e9acc..bbbbdbca5366 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -299,6 +299,7 @@ int mmc_add_card(struct mmc_card *card) { int ret; const char *type; + const char *speed_mode = ""; const char *uhs_bus_speed_mode = ""; static const char *const uhs_speeds[] = { [UHS_SDR12_BUS_SPEED] = "SDR12 ", @@ -337,25 +338,29 @@ int mmc_add_card(struct mmc_card *card) break; } + if (mmc_card_hs(card)) + speed_mode = "high speed "; + else if (mmc_card_uhs(card)) + speed_mode = "ultra high speed "; + else if (mmc_card_ddr52(card)) + speed_mode = "high speed DDR "; + else if (mmc_card_hs200(card)) + speed_mode = "HS200 "; + else if (mmc_card_hs400es(card)) + speed_mode = "HS400 Enhanced strobe "; + else if (mmc_card_hs400(card)) + speed_mode = "HS400 "; + if (mmc_card_uhs(card) && (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds))) uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed]; - if (mmc_host_is_spi(card->host)) { - pr_info("%s: new %s%s%s card on SPI\n", - mmc_hostname(card->host), - mmc_card_hs(card) ? "high speed " : "", - mmc_card_ddr52(card) ? "DDR " : "", - type); - } else { - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", - mmc_hostname(card->host), - mmc_card_uhs(card) ? "ultra high speed " : - (mmc_card_hs(card) ? "high speed " : ""), - mmc_card_hs400(card) ? "HS400 " : - (mmc_card_hs200(card) ? "HS200 " : ""), - mmc_card_hs400es(card) ? "Enhanced strobe " : "", - mmc_card_ddr52(card) ? "DDR " : "", + if (mmc_host_is_spi(card->host)) + pr_info("%s: new %s%s card on SPI\n", + mmc_hostname(card->host), speed_mode, type); + else { + pr_info("%s: new %s%s%s card at address %04x\n", + mmc_hostname(card->host), speed_mode, uhs_bus_speed_mode, type, card->rca); }