| Message ID | 20230226205357.1013504-1-dario.binacchi@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | gpio: mxs: use dynamic allocation of base | expand |
Hi Dario, Am 26.02.23 um 21:53 schrieb Dario Binacchi: > Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static > gpiobase allocation"), one or more warnings are printed during boot on > systems where static allocation of GPIO base is used: > > [ 0.136834] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. > [ 0.142753] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. > [ 0.148452] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. > [ 0.154341] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. > [ 0.160097] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. > > So let's follow the suggestion and use dynamic allocation. i understand the motivation of avoiding these warnings. AFAIK the MXS platform is older than the dynamic allocation of GPIO base. In the perfect world all applications has been migrated to libgpiod / chardev GPIO. But i'm really concerned this hasn't happend yet, at least for this platform. So i believe this change break applications, since it affects userspace. Best regards > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > --- > > drivers/gpio/gpio-mxs.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c > index 7f59e5d936c2..b48a7c1fb7c1 100644 > --- a/drivers/gpio/gpio-mxs.c > +++ b/drivers/gpio/gpio-mxs.c > @@ -330,7 +330,7 @@ static int mxs_gpio_probe(struct platform_device *pdev) > > port->gc.to_irq = mxs_gpio_to_irq; > port->gc.get_direction = mxs_gpio_get_direction; > - port->gc.base = port->id * 32; > + port->gc.base = -1; > > err = gpiochip_add_data(&port->gc, port); > if (err)
Hi Stefan, On Mon, Feb 27, 2023 at 6:52 PM Stefan Wahren <stefan.wahren@i2se.com> wrote: > > Hi Dario, > > Am 26.02.23 um 21:53 schrieb Dario Binacchi: > > Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static > > gpiobase allocation"), one or more warnings are printed during boot on > > systems where static allocation of GPIO base is used: > > > > [ 0.136834] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. > > [ 0.142753] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. > > [ 0.148452] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. > > [ 0.154341] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. > > [ 0.160097] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. > > > > So let's follow the suggestion and use dynamic allocation. > > i understand the motivation of avoiding these warnings. > > AFAIK the MXS platform is older than the dynamic allocation of GPIO > base. In the perfect world all applications has been migrated to > libgpiod / chardev GPIO. But i'm really concerned this hasn't happend > yet, at least for this platform. So i believe this change break > applications, since it affects userspace. Thanks for your explanations. Do you think it makes sense to use a Kconfig option to enable/disable the dynamic allocation of GPIO base? As done, if I'm not mistaken, in commit 80d34260f36c6 ("pinctrl: renesas: gpio: Use dynamic GPIO base if no function GPIOs")? With legacy support enabled by default, but the ability to try out the latest dynamic allocation functionality. Thanks and regards, Dario > > Best regards > > > > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > > --- > > > > drivers/gpio/gpio-mxs.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c > > index 7f59e5d936c2..b48a7c1fb7c1 100644 > > --- a/drivers/gpio/gpio-mxs.c > > +++ b/drivers/gpio/gpio-mxs.c > > @@ -330,7 +330,7 @@ static int mxs_gpio_probe(struct platform_device *pdev) > > > > port->gc.to_irq = mxs_gpio_to_irq; > > port->gc.get_direction = mxs_gpio_get_direction; > > - port->gc.base = port->id * 32; > > + port->gc.base = -1; > > > > err = gpiochip_add_data(&port->gc, port); > > if (err)
Hi Dario, On 23-02-28, Dario Binacchi wrote: > Hi Stefan, > > On Mon, Feb 27, 2023 at 6:52 PM Stefan Wahren <stefan.wahren@i2se.com> wrote: > > > > Hi Dario, > > > > Am 26.02.23 um 21:53 schrieb Dario Binacchi: > > > Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static > > > gpiobase allocation"), one or more warnings are printed during boot on > > > systems where static allocation of GPIO base is used: > > > > > > [ 0.136834] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. > > > [ 0.142753] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. > > > [ 0.148452] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. > > > [ 0.154341] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. > > > [ 0.160097] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. > > > > > > So let's follow the suggestion and use dynamic allocation. > > > > i understand the motivation of avoiding these warnings. > > > > AFAIK the MXS platform is older than the dynamic allocation of GPIO > > base. In the perfect world all applications has been migrated to > > libgpiod / chardev GPIO. But i'm really concerned this hasn't happend > > yet, at least for this platform. So i believe this change break > > applications, since it affects userspace. > > Thanks for your explanations. There was also a lengthly discussion here: https://lore.kernel.org/all/20230120104647.nwki4silrtd7bt3w@pengutronix.de/ > Do you think it makes sense to use a Kconfig option to enable/disable > the dynamic allocation of GPIO base? What we could do is to check the GPIO_SYSFS kconfig symbol. If this is enabled we should keep the current behaviour to not break the uAPI else we can go with the dynamic numbering. What we should avoid is a new Kconfig symbol. Regards, Marco > As done, if I'm not mistaken, in commit 80d34260f36c6 ("pinctrl: > renesas: gpio: Use dynamic GPIO base if no function GPIOs")? > With legacy support enabled by default, but the ability to try out the > latest dynamic allocation functionality. > > Thanks and regards, > Dario > > > > > Best regards > > > > > > > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > > > --- > > > > > > drivers/gpio/gpio-mxs.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c > > > index 7f59e5d936c2..b48a7c1fb7c1 100644 > > > --- a/drivers/gpio/gpio-mxs.c > > > +++ b/drivers/gpio/gpio-mxs.c > > > @@ -330,7 +330,7 @@ static int mxs_gpio_probe(struct platform_device *pdev) > > > > > > port->gc.to_irq = mxs_gpio_to_irq; > > > port->gc.get_direction = mxs_gpio_get_direction; > > > - port->gc.base = port->id * 32; > > > + port->gc.base = -1; > > > > > > err = gpiochip_add_data(&port->gc, port); > > > if (err) > > > > -- > > Dario Binacchi > > Senior Embedded Linux Developer > > dario.binacchi@amarulasolutions.com > > __________________________________ > > > Amarula Solutions SRL > > Via Le Canevare 30, 31100 Treviso, Veneto, IT > > T. +39 042 243 5310 > info@amarulasolutions.com > > www.amarulasolutions.com > >
Hi everyone, Am Dienstag, 28. Februar 2023, 09:46:27 CET schrieb Marco Felsch: > Hi Dario, > > On 23-02-28, Dario Binacchi wrote: > > Hi Stefan, > > > > On Mon, Feb 27, 2023 at 6:52 PM Stefan Wahren <stefan.wahren@i2se.com> wrote: > > > Hi Dario, > > > > > > Am 26.02.23 um 21:53 schrieb Dario Binacchi: > > > > Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using > > > > static > > > > gpiobase allocation"), one or more warnings are printed during boot on > > > > systems where static allocation of GPIO base is used: > > > > > > > > [ 0.136834] gpio gpiochip0: Static allocation of GPIO base is > > > > deprecated, use dynamic allocation. [ 0.142753] gpio gpiochip1: > > > > Static allocation of GPIO base is deprecated, use dynamic allocation. > > > > [ 0.148452] gpio gpiochip2: Static allocation of GPIO base is > > > > deprecated, use dynamic allocation. [ 0.154341] gpio gpiochip3: > > > > Static allocation of GPIO base is deprecated, use dynamic allocation. > > > > [ 0.160097] gpio gpiochip4: Static allocation of GPIO base is > > > > deprecated, use dynamic allocation. > > > > > > > > So let's follow the suggestion and use dynamic allocation. > > > > > > i understand the motivation of avoiding these warnings. > > > > > > AFAIK the MXS platform is older than the dynamic allocation of GPIO > > > base. In the perfect world all applications has been migrated to > > > libgpiod / chardev GPIO. But i'm really concerned this hasn't happend > > > yet, at least for this platform. So i believe this change break > > > applications, since it affects userspace. > > > > Thanks for your explanations. > > There was also a lengthly discussion here: > > https://lore.kernel.org/all/20230120104647.nwki4silrtd7bt3w@pengutronix.de/ > > > Do you think it makes sense to use a Kconfig option to enable/disable > > the dynamic allocation of GPIO base? > > What we could do is to check the GPIO_SYSFS kconfig symbol. If this is > enabled we should keep the current behaviour to not break the uAPI else > we can go with the dynamic numbering. What we should avoid is a new > Kconfig symbol. Even that is only half of the truth. Apparently this is crucial for GPIO_SYSFS, but even without sysfs it affects the order of the character devices, which might break userspace. The main open issue is, whether GPIO aliases shall be supported or not, see see [1] and [2]. Once this is clear, the switch to dynamic base can be done. Best regards, Alexander [1] https://lore.kernel.org/linux-gpio/20230215092421.143199-1-alexander.stein@ew.tq-group.com/T/#u [2] https://lore.kernel.org/linux-gpio/5941337.lOV4Wx5bFT@steina-w/T/ #m2a74777fc4031b7f6f30ac1dcf65b20e7d3f8f12 > Regards, > Marco > > > As done, if I'm not mistaken, in commit 80d34260f36c6 ("pinctrl: > > renesas: gpio: Use dynamic GPIO base if no function GPIOs")? > > With legacy support enabled by default, but the ability to try out the > > latest dynamic allocation functionality. > > > > Thanks and regards, > > Dario > > > > > Best regards > > > > > > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > > > > --- > > > > > > > > drivers/gpio/gpio-mxs.c | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c > > > > index 7f59e5d936c2..b48a7c1fb7c1 100644 > > > > --- a/drivers/gpio/gpio-mxs.c > > > > +++ b/drivers/gpio/gpio-mxs.c > > > > @@ -330,7 +330,7 @@ static int mxs_gpio_probe(struct platform_device > > > > *pdev) > > > > > > > > port->gc.to_irq = mxs_gpio_to_irq; > > > > port->gc.get_direction = mxs_gpio_get_direction; > > > > > > > > - port->gc.base = port->id * 32; > > > > + port->gc.base = -1; > > > > > > > > err = gpiochip_add_data(&port->gc, port); > > > > if (err)
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index 7f59e5d936c2..b48a7c1fb7c1 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -330,7 +330,7 @@ static int mxs_gpio_probe(struct platform_device *pdev) port->gc.to_irq = mxs_gpio_to_irq; port->gc.get_direction = mxs_gpio_get_direction; - port->gc.base = port->id * 32; + port->gc.base = -1; err = gpiochip_add_data(&port->gc, port); if (err)
Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static gpiobase allocation"), one or more warnings are printed during boot on systems where static allocation of GPIO base is used: [ 0.136834] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.142753] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.148452] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.154341] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.160097] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. So let's follow the suggestion and use dynamic allocation. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- drivers/gpio/gpio-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)