| Message ID | 20230203135043.409192-1-james.morse@arm.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | ACPI/arm64: add support for virtual cpuhotplug | expand |
On Fri, 3 Feb 2023 13:50:11 +0000 James Morse <james.morse@arm.com> wrote: ... > On a system that supports cpuhotplug the MADT has to describe every possible > CPU at boot. Under KVM, the vGIC needs to know about every possible vCPU before > the guest is started. > With these constraints, virtual-cpuhotplug is really just a hypervisor/firmware > policy about which CPUs can be brought online. > > This series adds support for virtual-cpuhotplug as exactly that: firmware > policy. This may even work on a physical machine too; for a guest the part of > firmware is played by the VMM. (typically Qemu). > > PSCI support is modified to return 'DENIED' if the CPU can't be brought > online/enabled yet. The CPU object's _STA method's enabled bit is used to > indicate firmware's current disposition. If the CPU has its enabled bit clear, > it will not be registered with sysfs, and attempts to bring it online will > fail. The notifications that _STA has changed its value then work in the same > way as physical hotplug, and firmware can cause the CPU to be registered some > time later, allowing it to be brought online. Hi James, As we discussed on an LOD call a while back, I think that we need some path to find out if the guest supports vCPU HP or not so that info can be queried by an orchestrator / libvirt etc. In general the entity responsible for allocating extra vCPUs may not know what support the VM has for this feature. There are various ways we could get this information into the VMM. My immediate thought is to use one of the ACPI interfaces that lets us write AML that can set an emulated register. A query to the VMM can check if this register is set. So options. _OSI() - Deprecated on ARM64 so lets not use that ;) _OSC() - Could add a bit to Table 6.13 Platform-Wide Capabilites in ACPI 6.5 spec. Given x86 has a similar online capable bit perhaps this is the best option though it is the one that requires a formal code first proposal to ASWG. _OSC() - Could add a new UUID and put it under a suitable device - maybe all CPUs? You could definitely argue this feature is an operating system property. _DSM() - Similar to OSC but always under a device. Whilst can be used for this I'm not sure it really matches intended usecase. Assuming everyone agrees this bit of introspection is useful, Rafael / other ACPI specialists: Any suggestions on how best to do this? Jonathan > > This creates something that looks like cpuhotplug to user-space, as the sysfs > files appear and disappear, and the udev notifications look the same. > > One notable difference is the CPU present mask, which is exposed via sysfs. > Because the CPUs remain present throughout, they can still be seen in that mask. > This value does get used by webbrowsers to estimate the number of CPUs > as the CPU online mask is constantly changed on mobile phones. > > Linux is tolerant of PSCI returning errors, as its always been allowed to do > that. To avoid confusing OS that can't tolerate this, we needed an additional > bit in the MADT GICC flags. This series copies ACPI_MADT_ONLINE_CAPABLE, which > appears to be for this purpose, but calls it ACPI_MADT_GICC_CPU_CAPABLE as it > has a different bit position in the GICC. > > This code is unconditionally enabled for all ACPI architectures. > If there are problems with firmware tables on some devices, the CPUs will > already be online by the time the acpi_processor_make_enabled() is called. > A mismatch here causes a firmware-bug message and kernel taint. This should > only affect people with broken firmware who also boot with maxcpus=1, and > bring CPUs online later. > > I had a go at switching the remaining architectures over to GENERIC_CPU_DEVICES, > so that the Kconfig symbol can be removed, but I got stuck with powerpc > and s390. > > > The first patch has already been posted as a fix here: > https://www.spinics.net/lists/linux-ia64/msg21920.html > I've only build tested Loongarch and ia64. > > > If folk want to play along at home, you'll need a copy of Qemu that supports this. > https://github.com/salil-mehta/qemu.git salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present > > You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER > to match your host kernel. Replace your '-smp' argument with something like: > | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 > > then feed the following to the Qemu montior; > | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 > | (qemu) device_del cpu1 > > > This series is based on v6.2-rc3, and can be retrieved from: > https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 > > > Thanks, > > James Morse (29): > ia64: Fix build error due to switch case label appearing next to > declaration > ACPI: Move ACPI_HOTPLUG_CPU to be enabled per architecture > drivers: base: Use present CPUs in GENERIC_CPU_DEVICES > drivers: base: Allow parts of GENERIC_CPU_DEVICES to be overridden > drivers: base: Move cpu_dev_init() after node_dev_init() > arm64: setup: Switch over to GENERIC_CPU_DEVICES using > arch_register_cpu() > ia64/topology: Switch over to GENERIC_CPU_DEVICES > x86/topology: Switch over to GENERIC_CPU_DEVICES > LoongArch: Switch over to GENERIC_CPU_DEVICES > arch_topology: Make register_cpu_capacity_sysctl() tolerant to late > CPUs > ACPI: processor: Add support for processors described as container > packages > ACPI: processor: Register CPUs that are online, but not described in > the DSDT > ACPI: processor: Register all CPUs from acpi_processor_get_info() > ACPI: Rename ACPI_HOTPLUG_CPU to include 'present' > ACPI: Move acpi_bus_trim_one() before acpi_scan_hot_remove() > ACPI: Rename acpi_processor_hotadd_init and remove pre-processor > guards > ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug > ACPI: Check _STA present bit before making CPUs not present > ACPI: Warn when the present bit changes but the feature is not enabled > drivers: base: Implement weak arch_unregister_cpu() > LoongArch: Use the __weak version of arch_unregister_cpu() > arm64: acpi: Move get_cpu_for_acpi_id() to a header > ACPICA: Add new MADT GICC flags fields [code first?] > arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a > helper > irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc() > irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' > CPUs > ACPI: add support to register CPUs based on the _STA enabled bit > arm64: document virtual CPU hotplug's expectations > cpumask: Add enabled cpumask for present CPUs that can be brought > online > > Jean-Philippe Brucker (3): > arm64: psci: Ignore DENIED CPUs > KVM: arm64: Pass hypercalls to userspace > KVM: arm64: Pass PSCI calls to userspace > > Documentation/arm64/cpu-hotplug.rst | 79 ++++++++++++ > Documentation/arm64/index.rst | 1 + > Documentation/virt/kvm/api.rst | 31 ++++- > Documentation/virt/kvm/arm/hypercalls.rst | 1 + > arch/arm64/Kconfig | 1 + > arch/arm64/include/asm/acpi.h | 11 ++ > arch/arm64/include/asm/cpu.h | 1 - > arch/arm64/include/asm/kvm_host.h | 2 + > arch/arm64/kernel/acpi_numa.c | 11 -- > arch/arm64/kernel/psci.c | 2 +- > arch/arm64/kernel/setup.c | 13 +- > arch/arm64/kernel/smp.c | 5 +- > arch/arm64/kvm/arm.c | 15 ++- > arch/arm64/kvm/hypercalls.c | 28 ++++- > arch/arm64/kvm/psci.c | 13 ++ > arch/ia64/Kconfig | 2 + > arch/ia64/include/asm/acpi.h | 2 +- > arch/ia64/include/asm/cpu.h | 11 -- > arch/ia64/kernel/acpi.c | 6 +- > arch/ia64/kernel/setup.c | 2 +- > arch/ia64/kernel/sys_ia64.c | 7 +- > arch/ia64/kernel/topology.c | 35 +----- > arch/loongarch/Kconfig | 2 + > arch/loongarch/kernel/topology.c | 31 +---- > arch/x86/Kconfig | 2 + > arch/x86/include/asm/cpu.h | 6 - > arch/x86/kernel/acpi/boot.c | 4 +- > arch/x86/kernel/topology.c | 19 +-- > drivers/acpi/Kconfig | 5 +- > drivers/acpi/acpi_processor.c | 146 +++++++++++++++++----- > drivers/acpi/processor_core.c | 2 +- > drivers/acpi/scan.c | 116 +++++++++++------ > drivers/base/arch_topology.c | 38 ++++-- > drivers/base/cpu.c | 31 ++++- > drivers/base/init.c | 2 +- > drivers/firmware/psci/psci.c | 2 + > drivers/irqchip/irq-gic-v3.c | 38 +++--- > include/acpi/acpi_bus.h | 1 + > include/acpi/actbl2.h | 1 + > include/kvm/arm_hypercalls.h | 1 + > include/kvm/arm_psci.h | 4 + > include/linux/acpi.h | 10 +- > include/linux/cpu.h | 6 + > include/linux/cpumask.h | 25 ++++ > include/uapi/linux/kvm.h | 2 + > kernel/cpu.c | 3 + > 46 files changed, 532 insertions(+), 244 deletions(-) > create mode 100644 Documentation/arm64/cpu-hotplug.rst >
Hi Jonathan, On 07/03/2023 12:00, Jonathan Cameron wrote: > On Fri, 3 Feb 2023 13:50:11 +0000 > James Morse <james.morse@arm.com> wrote: >> On a system that supports cpuhotplug the MADT has to describe every possible >> CPU at boot. Under KVM, the vGIC needs to know about every possible vCPU before >> the guest is started. >> With these constraints, virtual-cpuhotplug is really just a hypervisor/firmware >> policy about which CPUs can be brought online. >> >> This series adds support for virtual-cpuhotplug as exactly that: firmware >> policy. This may even work on a physical machine too; for a guest the part of >> firmware is played by the VMM. (typically Qemu). >> >> PSCI support is modified to return 'DENIED' if the CPU can't be brought >> online/enabled yet. The CPU object's _STA method's enabled bit is used to >> indicate firmware's current disposition. If the CPU has its enabled bit clear, >> it will not be registered with sysfs, and attempts to bring it online will >> fail. The notifications that _STA has changed its value then work in the same >> way as physical hotplug, and firmware can cause the CPU to be registered some >> time later, allowing it to be brought online. > As we discussed on an LOD call a while back, I think that we need some path to > find out if the guest supports vCPU HP or not so that info can be queried by > an orchestrator / libvirt etc. In general the entity responsible for allocating > extra vCPUs may not know what support the VM has for this feature. I agree. For arm64 this is going to be important if/when there are machines that do physical hotplug of CPUs too. > There are various ways we could get this information into the VMM. > My immediate thought is to use one of the ACPI interfaces that lets us write > AML that can set an emulated register. A query to the VMM can check if this > register is set. > > So options. > > _OSI() - Deprecated on ARM64 so lets not use that ;) News to me, I've only just discovered it! > _OSC() - Could add a bit to Table 6.13 Platform-Wide Capabilites in ACPI 6.5 spec. > Given x86 has a similar online capable bit perhaps this is the best option > though it is the one that requires a formal code first proposal to ASWG. I've had a go at writing this one: https://gitlab.arm.com/linux-arm/linux-jm/-/commit/220b0d8b0261d7467c8705e6f614d57325798859 It'll appear in the v1 of the series once the kernel and qemu bits are all lined up again. Thanks, James > _OSC() - Could add a new UUID and put it under a suitable device - maybe all CPUs? > You could definitely argue this feature is an operating system property. > _DSM() - Similar to OSC but always under a device. > Whilst can be used for this I'm not sure it really matches intended usecase. > > Assuming everyone agrees this bit of introspection is useful, > Rafael / other ACPI specialists: Any suggestions on how best to do this?
On Mon, 13 Mar 2023 15:50:52 +0000 James Morse <james.morse@arm.com> wrote: > Hi Jonathan, > > On 07/03/2023 12:00, Jonathan Cameron wrote: > > On Fri, 3 Feb 2023 13:50:11 +0000 > > James Morse <james.morse@arm.com> wrote: > > >> On a system that supports cpuhotplug the MADT has to describe every possible > >> CPU at boot. Under KVM, the vGIC needs to know about every possible vCPU before > >> the guest is started. > >> With these constraints, virtual-cpuhotplug is really just a hypervisor/firmware > >> policy about which CPUs can be brought online. > >> > >> This series adds support for virtual-cpuhotplug as exactly that: firmware > >> policy. This may even work on a physical machine too; for a guest the part of > >> firmware is played by the VMM. (typically Qemu). > >> > >> PSCI support is modified to return 'DENIED' if the CPU can't be brought > >> online/enabled yet. The CPU object's _STA method's enabled bit is used to > >> indicate firmware's current disposition. If the CPU has its enabled bit clear, > >> it will not be registered with sysfs, and attempts to bring it online will > >> fail. The notifications that _STA has changed its value then work in the same > >> way as physical hotplug, and firmware can cause the CPU to be registered some > >> time later, allowing it to be brought online. > > > As we discussed on an LOD call a while back, I think that we need some path to > > find out if the guest supports vCPU HP or not so that info can be queried by > > an orchestrator / libvirt etc. In general the entity responsible for allocating > > extra vCPUs may not know what support the VM has for this feature. > > I agree. For arm64 this is going to be important if/when there are machines that do > physical hotplug of CPUs too. > > > > There are various ways we could get this information into the VMM. > > My immediate thought is to use one of the ACPI interfaces that lets us write > > AML that can set an emulated register. A query to the VMM can check if this > > register is set. > > > > So options. > > > > _OSI() - Deprecated on ARM64 so lets not use that ;) > > News to me, I've only just discovered it! > > > > _OSC() - Could add a bit to Table 6.13 Platform-Wide Capabilites in ACPI 6.5 spec. > > Given x86 has a similar online capable bit perhaps this is the best option > > though it is the one that requires a formal code first proposal to ASWG. > > I've had a go at writing this one: > https://gitlab.arm.com/linux-arm/linux-jm/-/commit/220b0d8b0261d7467c8705e6f614d57325798859 From a quick glance that looks good to me. > > It'll appear in the v1 of the series once the kernel and qemu bits are all lined up again. We'll also need to kick off the spec change with a code-first proposal. I think current standard way to do that is a bugzilla entry in EDK2 repo https://bugzilla.tianocore.org/buglist.cgi?component=Specification%20Update&product=EDK2%20Code%20First&resolution=--- and the get someone in ASWG to create equivalent tracking issue in mantis. Great if you already have that in hand via relevant ARM folks. Jonathan > > > Thanks, > > James > > > > _OSC() - Could add a new UUID and put it under a suitable device - maybe all CPUs? > > You could definitely argue this feature is an operating system property. > > _DSM() - Similar to OSC but always under a device. > > Whilst can be used for this I'm not sure it really matches intended usecase. > > > > Assuming everyone agrees this bit of introspection is useful, > > Rafael / other ACPI specialists: Any suggestions on how best to do this? >
Hi James, On 2/3/23 9:50 PM, James Morse wrote: [...] > > > The first patch has already been posted as a fix here: > https://www.spinics.net/lists/linux-ia64/msg21920.html > I've only build tested Loongarch and ia64. > It has been merged to upstream. > > If folk want to play along at home, you'll need a copy of Qemu that supports this. > https://github.com/salil-mehta/qemu.git salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present > > You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER > to match your host kernel. Replace your '-smp' argument with something like: > | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 > > then feed the following to the Qemu montior; > | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 > | (qemu) device_del cpu1 > > > This series is based on v6.2-rc3, and can be retrieved from: > https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 > I give it a try, but the hot-added CPU needs to be put into online state manually. I'm not sure if it's expected or not. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm,dirty-ring-size=65536 \ -machine virt,gic-version=host,nvdimm=on \ -cpu host -smp maxcpus=8,cpus=1,sockets=1,clusters=1,cores=8,threads=1 \ -m 1024M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=1024M \ -numa node,nodeid=0,memdev=mem0 \ -L /home/gavin/sandbox/qemu.main/build/pc-bios \ -monitor none -serial mon:stdio -nographic -gdb tcp::1234 \ -bios /home/gavin/sandbox/qemu.main/build/pc-bios/edk2-aarch64-code.fd \ -kernel /home/gavin/sandbox/linux.guest/arch/arm64/boot/Image \ -initrd /home/gavin/sandbox/images/rootfs.cpio.xz \ -append memhp_default_state=online_movable \ : : guest# cat /proc/cpuinfo | grep "CPU implementer" | wc -l 1 (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 guest# cat /proc/cpuinfo | grep "CPU implementer" | wc -l 1 guest# echo 1 > /sys/devices/system/cpu/cpu1/online guest# cat /proc/cpuinfo | grep "CPU implementer" | wc -l 2 (qemu) device_del cpu1 guest# cat /proc/cpuinfo | grep "CPU implementer" | wc -l 1 Note that the QEMU binary is directly built from Salil's repository and the kernel image is built from v6.3-rc4, plus this patchset excluding the first patch since it has been merged. Thanks, Gavin
Hi James, On 2/3/23 21:50, James Morse wrote: > Hello! > > This series adds what looks like cpuhotplug support to arm64 for use in > virtual machines. It does this by moving the cpu_register() calls for > architectures that support ACPI out of the arch code by using > GENERIC_CPU_DEVICES, then into the ACPI processor driver. > > The kubernetes folk really want to be able to add CPUs to an existing VM, > in exactly the same way they do on x86. The use-case is pre-booting guests > with one CPU, then adding the number that were actually needed when the > workload is provisioned. > > Wait? Doesn't arm64 support cpuhotplug already!? > In the arm world, cpuhotplug gets used to mean removing the power from a CPU. > The CPU is offline, and remains present. For x86, and ACPI, cpuhotplug > has the additional step of physically removing the CPU, so that it isn't > present anymore. > > Arm64 doesn't support this, and can't support it: CPUs are really a slice > of the SoC, and there is not enough information in the existing ACPI tables > to describe which bits of the slice also got removed. Without a reference > machine: adding this support to the spec is a wild goose chase. > > Critically: everything described in the firmware tables must remain present. > > For a virtual machine this is easy as all the other bits of 'virtual SoC' > are emulated, so they can (and do) remain present when a vCPU is 'removed'. > > On a system that supports cpuhotplug the MADT has to describe every possible > CPU at boot. Under KVM, the vGIC needs to know about every possible vCPU before > the guest is started. > With these constraints, virtual-cpuhotplug is really just a hypervisor/firmware > policy about which CPUs can be brought online. > > This series adds support for virtual-cpuhotplug as exactly that: firmware > policy. This may even work on a physical machine too; for a guest the part of > firmware is played by the VMM. (typically Qemu). > > PSCI support is modified to return 'DENIED' if the CPU can't be brought > online/enabled yet. The CPU object's _STA method's enabled bit is used to > indicate firmware's current disposition. If the CPU has its enabled bit clear, > it will not be registered with sysfs, and attempts to bring it online will > fail. The notifications that _STA has changed its value then work in the same > way as physical hotplug, and firmware can cause the CPU to be registered some > time later, allowing it to be brought online. > > This creates something that looks like cpuhotplug to user-space, as the sysfs > files appear and disappear, and the udev notifications look the same. > > One notable difference is the CPU present mask, which is exposed via sysfs. > Because the CPUs remain present throughout, they can still be seen in that mask. > This value does get used by webbrowsers to estimate the number of CPUs > as the CPU online mask is constantly changed on mobile phones. > > Linux is tolerant of PSCI returning errors, as its always been allowed to do > that. To avoid confusing OS that can't tolerate this, we needed an additional > bit in the MADT GICC flags. This series copies ACPI_MADT_ONLINE_CAPABLE, which > appears to be for this purpose, but calls it ACPI_MADT_GICC_CPU_CAPABLE as it > has a different bit position in the GICC. > > This code is unconditionally enabled for all ACPI architectures. > If there are problems with firmware tables on some devices, the CPUs will > already be online by the time the acpi_processor_make_enabled() is called. > A mismatch here causes a firmware-bug message and kernel taint. This should > only affect people with broken firmware who also boot with maxcpus=1, and > bring CPUs online later. > > I had a go at switching the remaining architectures over to GENERIC_CPU_DEVICES, > so that the Kconfig symbol can be removed, but I got stuck with powerpc > and s390. > > > The first patch has already been posted as a fix here: > https://www.spinics.net/lists/linux-ia64/msg21920.html > I've only build tested Loongarch and ia64. > > > If folk want to play along at home, you'll need a copy of Qemu that supports this. > https://github.com/salil-mehta/qemu.git salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present > > You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER > to match your host kernel. Replace your '-smp' argument with something like: > | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 > > then feed the following to the Qemu montior; > | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 > | (qemu) device_del cpu1 > > > This series is based on v6.2-rc3, and can be retrieved from: > https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 I applied this patch series on v6.2-rc3 and using the QEMU cloned from the salil-mehta/qemu.git repo. But when I try to run the QEMU, it shows: $ qemu-system-aarch64: -accel kvm: Failed to enable KVM_CAP_ARM_PSCI_TO_USER cap. Here is the command I use: $ qemu-system-aarch64 -machine virt -bios /usr/share/qemu-efi-aarch64/QEMU_EFI.fd -accel kvm -m 4096 -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 -cpu host -qmp unix:./src.socket,server,nowait -hda ./XXX.qcow2 -serial unix:./src.serial,server,nowait -monitor stdio It seems something related to your notice: You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER to match your host kernel. But I'm not actually understand what should I fix, since I haven't review the patch series. Could you give me some more information? Maybe I'm doing something wrong. Thanks, > > > Thanks, > > James Morse (29): > ia64: Fix build error due to switch case label appearing next to > declaration > ACPI: Move ACPI_HOTPLUG_CPU to be enabled per architecture > drivers: base: Use present CPUs in GENERIC_CPU_DEVICES > drivers: base: Allow parts of GENERIC_CPU_DEVICES to be overridden > drivers: base: Move cpu_dev_init() after node_dev_init() > arm64: setup: Switch over to GENERIC_CPU_DEVICES using > arch_register_cpu() > ia64/topology: Switch over to GENERIC_CPU_DEVICES > x86/topology: Switch over to GENERIC_CPU_DEVICES > LoongArch: Switch over to GENERIC_CPU_DEVICES > arch_topology: Make register_cpu_capacity_sysctl() tolerant to late > CPUs > ACPI: processor: Add support for processors described as container > packages > ACPI: processor: Register CPUs that are online, but not described in > the DSDT > ACPI: processor: Register all CPUs from acpi_processor_get_info() > ACPI: Rename ACPI_HOTPLUG_CPU to include 'present' > ACPI: Move acpi_bus_trim_one() before acpi_scan_hot_remove() > ACPI: Rename acpi_processor_hotadd_init and remove pre-processor > guards > ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug > ACPI: Check _STA present bit before making CPUs not present > ACPI: Warn when the present bit changes but the feature is not enabled > drivers: base: Implement weak arch_unregister_cpu() > LoongArch: Use the __weak version of arch_unregister_cpu() > arm64: acpi: Move get_cpu_for_acpi_id() to a header > ACPICA: Add new MADT GICC flags fields [code first?] > arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a > helper > irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc() > irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' > CPUs > ACPI: add support to register CPUs based on the _STA enabled bit > arm64: document virtual CPU hotplug's expectations > cpumask: Add enabled cpumask for present CPUs that can be brought > online > > Jean-Philippe Brucker (3): > arm64: psci: Ignore DENIED CPUs > KVM: arm64: Pass hypercalls to userspace > KVM: arm64: Pass PSCI calls to userspace > > Documentation/arm64/cpu-hotplug.rst | 79 ++++++++++++ > Documentation/arm64/index.rst | 1 + > Documentation/virt/kvm/api.rst | 31 ++++- > Documentation/virt/kvm/arm/hypercalls.rst | 1 + > arch/arm64/Kconfig | 1 + > arch/arm64/include/asm/acpi.h | 11 ++ > arch/arm64/include/asm/cpu.h | 1 - > arch/arm64/include/asm/kvm_host.h | 2 + > arch/arm64/kernel/acpi_numa.c | 11 -- > arch/arm64/kernel/psci.c | 2 +- > arch/arm64/kernel/setup.c | 13 +- > arch/arm64/kernel/smp.c | 5 +- > arch/arm64/kvm/arm.c | 15 ++- > arch/arm64/kvm/hypercalls.c | 28 ++++- > arch/arm64/kvm/psci.c | 13 ++ > arch/ia64/Kconfig | 2 + > arch/ia64/include/asm/acpi.h | 2 +- > arch/ia64/include/asm/cpu.h | 11 -- > arch/ia64/kernel/acpi.c | 6 +- > arch/ia64/kernel/setup.c | 2 +- > arch/ia64/kernel/sys_ia64.c | 7 +- > arch/ia64/kernel/topology.c | 35 +----- > arch/loongarch/Kconfig | 2 + > arch/loongarch/kernel/topology.c | 31 +---- > arch/x86/Kconfig | 2 + > arch/x86/include/asm/cpu.h | 6 - > arch/x86/kernel/acpi/boot.c | 4 +- > arch/x86/kernel/topology.c | 19 +-- > drivers/acpi/Kconfig | 5 +- > drivers/acpi/acpi_processor.c | 146 +++++++++++++++++----- > drivers/acpi/processor_core.c | 2 +- > drivers/acpi/scan.c | 116 +++++++++++------ > drivers/base/arch_topology.c | 38 ++++-- > drivers/base/cpu.c | 31 ++++- > drivers/base/init.c | 2 +- > drivers/firmware/psci/psci.c | 2 + > drivers/irqchip/irq-gic-v3.c | 38 +++--- > include/acpi/acpi_bus.h | 1 + > include/acpi/actbl2.h | 1 + > include/kvm/arm_hypercalls.h | 1 + > include/kvm/arm_psci.h | 4 + > include/linux/acpi.h | 10 +- > include/linux/cpu.h | 6 + > include/linux/cpumask.h | 25 ++++ > include/uapi/linux/kvm.h | 2 + > kernel/cpu.c | 3 + > 46 files changed, 532 insertions(+), 244 deletions(-) > create mode 100644 Documentation/arm64/cpu-hotplug.rst >
Hi Shaoqin, On 3/29/23 1:52 PM, Shaoqin Huang wrote: > On 2/3/23 21:50, James Morse wrote: [...] >> >> The first patch has already been posted as a fix here: >> https://www.spinics.net/lists/linux-ia64/msg21920.html >> I've only build tested Loongarch and ia64. >> >> >> If folk want to play along at home, you'll need a copy of Qemu that supports this. >> https://github.com/salil-mehta/qemu.git salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present >> >> You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER >> to match your host kernel. Replace your '-smp' argument with something like: >> | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 >> >> then feed the following to the Qemu montior; >> | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 >> | (qemu) device_del cpu1 >> >> >> This series is based on v6.2-rc3, and can be retrieved from: >> https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 > > I applied this patch series on v6.2-rc3 and using the QEMU cloned from the salil-mehta/qemu.git repo. But when I try to run the QEMU, it shows: > > $ qemu-system-aarch64: -accel kvm: Failed to enable KVM_CAP_ARM_PSCI_TO_USER cap. > > Here is the command I use: > > $ qemu-system-aarch64 > -machine virt > -bios /usr/share/qemu-efi-aarch64/QEMU_EFI.fd > -accel kvm > -m 4096 > -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 > -cpu host > -qmp unix:./src.socket,server,nowait > -hda ./XXX.qcow2 > -serial unix:./src.serial,server,nowait > -monitor stdio > > It seems something related to your notice: You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER > to match your host kernel. > > But I'm not actually understand what should I fix, since I haven't review the patch series. Could you give me some more information? Maybe I'm doing something wrong. > When the kernel is rebased to v6.2.rc3, the two capabilities are conflictsing between QEMU and host kernel. Please adjust them like below and have a try: In qemu/linux-headers/linux/kvm.h #define KVM_CAP_ARM_HVC_TO_USER 250 /* TODO: as per linux 6.1-rc2 */ #define KVM_CAP_ARM_PSCI_TO_USER 251 /* TODO: as per linux 6.1-rc2 */ In linux/include/uapi/linux/kvm.h #define KVM_CAP_ARM_HVC_TO_USER 250 #define KVM_CAP_ARM_PSCI_TO_USER 251 Thanks, Gavin
Hi Gavin, On 29/03/2023 03:35, Gavin Shan wrote: > On 2/3/23 9:50 PM, James Morse wrote: >> If folk want to play along at home, you'll need a copy of Qemu that supports this. >> https://github.com/salil-mehta/qemu.git >> salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present >> >> You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER >> to match your host kernel. Replace your '-smp' argument with something like: >> | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 >> >> then feed the following to the Qemu montior; >> | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 >> | (qemu) device_del cpu1 >> >> >> This series is based on v6.2-rc3, and can be retrieved from: >> https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 > I give it a try, but the hot-added CPU needs to be put into online > state manually. I'm not sure if it's expected or not. This is expected. If you want the CPUs to be brought online automatically, you can add udev rules to do that. Thanks, James
Hi James, On 9/13/23 03:01, James Morse wrote: > On 29/03/2023 03:35, Gavin Shan wrote: >> On 2/3/23 9:50 PM, James Morse wrote: > >>> If folk want to play along at home, you'll need a copy of Qemu that supports this. >>> https://github.com/salil-mehta/qemu.git >>> salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present >>> >>> You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER >>> to match your host kernel. Replace your '-smp' argument with something like: >>> | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 >>> >>> then feed the following to the Qemu montior; >>> | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 >>> | (qemu) device_del cpu1 >>> >>> >>> This series is based on v6.2-rc3, and can be retrieved from: >>> https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 > >> I give it a try, but the hot-added CPU needs to be put into online >> state manually. I'm not sure if it's expected or not. > > This is expected. If you want the CPUs to be brought online automatically, you can add > udev rules to do that. > Yeah, I usually execute the following command to bring the CPU into online state, after the vCPU is hot added by QMP command. (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 guest# echo 1 > /sys/devices/system/cpu/cpux/online James, the series was posted a while ago and do you have plan to respin and post RFCv2 in near future? :) Thanks, Gavin
On Wed, Sep 13, 2023 at 08:38:51AM +1000, Gavin Shan wrote: > > Hi James, > > On 9/13/23 03:01, James Morse wrote: > > On 29/03/2023 03:35, Gavin Shan wrote: > > > On 2/3/23 9:50 PM, James Morse wrote: > > > > > > If folk want to play along at home, you'll need a copy of Qemu that supports this. > > > > https://github.com/salil-mehta/qemu.git > > > > salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present > > > > > > > > You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER > > > > to match your host kernel. Replace your '-smp' argument with something like: > > > > | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 > > > > > > > > then feed the following to the Qemu montior; > > > > | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 > > > > | (qemu) device_del cpu1 > > > > > > > > > > > > This series is based on v6.2-rc3, and can be retrieved from: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 > > > > > I give it a try, but the hot-added CPU needs to be put into online > > > state manually. I'm not sure if it's expected or not. > > > > This is expected. If you want the CPUs to be brought online automatically, you can add > > udev rules to do that. > > > > Yeah, I usually execute the following command to bring the CPU into online state, > after the vCPU is hot added by QMP command. > > (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 > guest# echo 1 > /sys/devices/system/cpu/cpux/online > > James, the series was posted a while ago and do you have plan to respin > and post RFCv2 in near future? :) I'll pipe up here, because I've been discussing this topic with James privately. In James' last email to me, he indicated that he's hoping to publish the next iteration of the patches towards the end of this week. I suspect that's conditional on there being no major issues coming up. One of the things that I think would help this patch set along is if people could test it on x86, to make sure that there aren't any regressions on random x86 hardware - and report successes and failures so confidence in the patch series can be gained. Thanks.
Hello! This series adds what looks like cpuhotplug support to arm64 for use in virtual machines. It does this by moving the cpu_register() calls for architectures that support ACPI out of the arch code by using GENERIC_CPU_DEVICES, then into the ACPI processor driver. The kubernetes folk really want to be able to add CPUs to an existing VM, in exactly the same way they do on x86. The use-case is pre-booting guests with one CPU, then adding the number that were actually needed when the workload is provisioned. Wait? Doesn't arm64 support cpuhotplug already!? In the arm world, cpuhotplug gets used to mean removing the power from a CPU. The CPU is offline, and remains present. For x86, and ACPI, cpuhotplug has the additional step of physically removing the CPU, so that it isn't present anymore. Arm64 doesn't support this, and can't support it: CPUs are really a slice of the SoC, and there is not enough information in the existing ACPI tables to describe which bits of the slice also got removed. Without a reference machine: adding this support to the spec is a wild goose chase. Critically: everything described in the firmware tables must remain present. For a virtual machine this is easy as all the other bits of 'virtual SoC' are emulated, so they can (and do) remain present when a vCPU is 'removed'. On a system that supports cpuhotplug the MADT has to describe every possible CPU at boot. Under KVM, the vGIC needs to know about every possible vCPU before the guest is started. With these constraints, virtual-cpuhotplug is really just a hypervisor/firmware policy about which CPUs can be brought online. This series adds support for virtual-cpuhotplug as exactly that: firmware policy. This may even work on a physical machine too; for a guest the part of firmware is played by the VMM. (typically Qemu). PSCI support is modified to return 'DENIED' if the CPU can't be brought online/enabled yet. The CPU object's _STA method's enabled bit is used to indicate firmware's current disposition. If the CPU has its enabled bit clear, it will not be registered with sysfs, and attempts to bring it online will fail. The notifications that _STA has changed its value then work in the same way as physical hotplug, and firmware can cause the CPU to be registered some time later, allowing it to be brought online. This creates something that looks like cpuhotplug to user-space, as the sysfs files appear and disappear, and the udev notifications look the same. One notable difference is the CPU present mask, which is exposed via sysfs. Because the CPUs remain present throughout, they can still be seen in that mask. This value does get used by webbrowsers to estimate the number of CPUs as the CPU online mask is constantly changed on mobile phones. Linux is tolerant of PSCI returning errors, as its always been allowed to do that. To avoid confusing OS that can't tolerate this, we needed an additional bit in the MADT GICC flags. This series copies ACPI_MADT_ONLINE_CAPABLE, which appears to be for this purpose, but calls it ACPI_MADT_GICC_CPU_CAPABLE as it has a different bit position in the GICC. This code is unconditionally enabled for all ACPI architectures. If there are problems with firmware tables on some devices, the CPUs will already be online by the time the acpi_processor_make_enabled() is called. A mismatch here causes a firmware-bug message and kernel taint. This should only affect people with broken firmware who also boot with maxcpus=1, and bring CPUs online later. I had a go at switching the remaining architectures over to GENERIC_CPU_DEVICES, so that the Kconfig symbol can be removed, but I got stuck with powerpc and s390. The first patch has already been posted as a fix here: https://www.spinics.net/lists/linux-ia64/msg21920.html I've only build tested Loongarch and ia64. If folk want to play along at home, you'll need a copy of Qemu that supports this. https://github.com/salil-mehta/qemu.git salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER to match your host kernel. Replace your '-smp' argument with something like: | -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1 then feed the following to the Qemu montior; | (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1 | (qemu) device_del cpu1 This series is based on v6.2-rc3, and can be retrieved from: https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1 Thanks, James Morse (29): ia64: Fix build error due to switch case label appearing next to declaration ACPI: Move ACPI_HOTPLUG_CPU to be enabled per architecture drivers: base: Use present CPUs in GENERIC_CPU_DEVICES drivers: base: Allow parts of GENERIC_CPU_DEVICES to be overridden drivers: base: Move cpu_dev_init() after node_dev_init() arm64: setup: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu() ia64/topology: Switch over to GENERIC_CPU_DEVICES x86/topology: Switch over to GENERIC_CPU_DEVICES LoongArch: Switch over to GENERIC_CPU_DEVICES arch_topology: Make register_cpu_capacity_sysctl() tolerant to late CPUs ACPI: processor: Add support for processors described as container packages ACPI: processor: Register CPUs that are online, but not described in the DSDT ACPI: processor: Register all CPUs from acpi_processor_get_info() ACPI: Rename ACPI_HOTPLUG_CPU to include 'present' ACPI: Move acpi_bus_trim_one() before acpi_scan_hot_remove() ACPI: Rename acpi_processor_hotadd_init and remove pre-processor guards ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug ACPI: Check _STA present bit before making CPUs not present ACPI: Warn when the present bit changes but the feature is not enabled drivers: base: Implement weak arch_unregister_cpu() LoongArch: Use the __weak version of arch_unregister_cpu() arm64: acpi: Move get_cpu_for_acpi_id() to a header ACPICA: Add new MADT GICC flags fields [code first?] arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc() irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs ACPI: add support to register CPUs based on the _STA enabled bit arm64: document virtual CPU hotplug's expectations cpumask: Add enabled cpumask for present CPUs that can be brought online Jean-Philippe Brucker (3): arm64: psci: Ignore DENIED CPUs KVM: arm64: Pass hypercalls to userspace KVM: arm64: Pass PSCI calls to userspace Documentation/arm64/cpu-hotplug.rst | 79 ++++++++++++ Documentation/arm64/index.rst | 1 + Documentation/virt/kvm/api.rst | 31 ++++- Documentation/virt/kvm/arm/hypercalls.rst | 1 + arch/arm64/Kconfig | 1 + arch/arm64/include/asm/acpi.h | 11 ++ arch/arm64/include/asm/cpu.h | 1 - arch/arm64/include/asm/kvm_host.h | 2 + arch/arm64/kernel/acpi_numa.c | 11 -- arch/arm64/kernel/psci.c | 2 +- arch/arm64/kernel/setup.c | 13 +- arch/arm64/kernel/smp.c | 5 +- arch/arm64/kvm/arm.c | 15 ++- arch/arm64/kvm/hypercalls.c | 28 ++++- arch/arm64/kvm/psci.c | 13 ++ arch/ia64/Kconfig | 2 + arch/ia64/include/asm/acpi.h | 2 +- arch/ia64/include/asm/cpu.h | 11 -- arch/ia64/kernel/acpi.c | 6 +- arch/ia64/kernel/setup.c | 2 +- arch/ia64/kernel/sys_ia64.c | 7 +- arch/ia64/kernel/topology.c | 35 +----- arch/loongarch/Kconfig | 2 + arch/loongarch/kernel/topology.c | 31 +---- arch/x86/Kconfig | 2 + arch/x86/include/asm/cpu.h | 6 - arch/x86/kernel/acpi/boot.c | 4 +- arch/x86/kernel/topology.c | 19 +-- drivers/acpi/Kconfig | 5 +- drivers/acpi/acpi_processor.c | 146 +++++++++++++++++----- drivers/acpi/processor_core.c | 2 +- drivers/acpi/scan.c | 116 +++++++++++------ drivers/base/arch_topology.c | 38 ++++-- drivers/base/cpu.c | 31 ++++- drivers/base/init.c | 2 +- drivers/firmware/psci/psci.c | 2 + drivers/irqchip/irq-gic-v3.c | 38 +++--- include/acpi/acpi_bus.h | 1 + include/acpi/actbl2.h | 1 + include/kvm/arm_hypercalls.h | 1 + include/kvm/arm_psci.h | 4 + include/linux/acpi.h | 10 +- include/linux/cpu.h | 6 + include/linux/cpumask.h | 25 ++++ include/uapi/linux/kvm.h | 2 + kernel/cpu.c | 3 + 46 files changed, 532 insertions(+), 244 deletions(-) create mode 100644 Documentation/arm64/cpu-hotplug.rst