diff mbox series

[RFC,1/2] drm/msm/dp: enumerate edp panel during driver probe

Message ID 20230223135635.30659-2-quic_sbillaka@quicinc.com (mailing list archive)
State New, archived
Headers show
Series drm/msm/dp: refactor the msm dp driver resources | expand

Commit Message

Sankeerth Billakanti (QUIC) Feb. 23, 2023, 1:56 p.m. UTC
The eDP panel is identified and enumerated during probe of the panel-edp
driver. The current DP driver triggers this panel-edp driver probe while
getting the panel-bridge associated with the eDP panel from the platform
driver bind. If the panel-edp probe is deferred, then the whole bunch of
MDSS parent and child drivers have to defer and roll back.

So, we want to move the panel enumeration from bind to probe so that the
probe defer is easier to handle and also both the drivers appear consistent
in panel enumeration. This change moves the DP driver panel-bridge
enumeration to probe.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_aux.c     | 149 ++++++++++++++++++++++++++--
 drivers/gpu/drm/msm/dp/dp_catalog.c |  12 +++
 drivers/gpu/drm/msm/dp/dp_catalog.h |   1 +
 drivers/gpu/drm/msm/dp/dp_display.c |  80 ++++++---------
 4 files changed, 182 insertions(+), 60 deletions(-)

Comments

Dmitry Baryshkov Feb. 23, 2023, 2:59 p.m. UTC | #1
On Thu, 23 Feb 2023 at 15:57, Sankeerth Billakanti
<quic_sbillaka@quicinc.com> wrote:
>
> The eDP panel is identified and enumerated during probe of the panel-edp
> driver. The current DP driver triggers this panel-edp driver probe while
> getting the panel-bridge associated with the eDP panel from the platform
> driver bind. If the panel-edp probe is deferred, then the whole bunch of
> MDSS parent and child drivers have to defer and roll back.

No, MDSS has not been rolled back since 5.19. Please shift your
development on top of the current msm-next.

>
> So, we want to move the panel enumeration from bind to probe so that the
> probe defer is easier to handle and also both the drivers appear consistent
> in panel enumeration. This change moves the DP driver panel-bridge
> enumeration to probe.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> ---
>  drivers/gpu/drm/msm/dp/dp_aux.c     | 149 ++++++++++++++++++++++++++--
>  drivers/gpu/drm/msm/dp/dp_catalog.c |  12 +++
>  drivers/gpu/drm/msm/dp/dp_catalog.h |   1 +
>  drivers/gpu/drm/msm/dp/dp_display.c |  80 ++++++---------
>  4 files changed, 182 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> index cc3efed593aa..5da95dfdeede 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -110,7 +110,7 @@ static ssize_t dp_aux_write(struct dp_aux_private *aux,
>  }
>
>  static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
> -                             struct drm_dp_aux_msg *msg)
> +                             struct drm_dp_aux_msg *msg, bool poll)

What is the reason for working in polled mode rather than always using
the interrupts?

>  {
>         ssize_t ret;
>         unsigned long time_left;
> @@ -121,10 +121,16 @@ static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
>         if (ret < 0)
>                 return ret;
>
> -       time_left = wait_for_completion_timeout(&aux->comp,
> +       if (!poll) {
> +               time_left = wait_for_completion_timeout(&aux->comp,
>                                                 msecs_to_jiffies(250));
> -       if (!time_left)
> -               return -ETIMEDOUT;
> +               if (!time_left)
> +                       return -ETIMEDOUT;
> +       } else {
> +               ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux->catalog);
> +               if (!ret)
> +                       dp_aux_isr(&aux->dp_aux);
> +       }
>
>         return ret;
>  }
> @@ -238,7 +244,7 @@ static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
>   */
>  static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>                                    struct drm_dp_aux_msg *input_msg,
> -                                  bool send_seg)
> +                                  bool send_seg, bool poll)
>  {
>         struct drm_dp_aux_msg helper_msg;
>         u32 message_size = 0x10;
> @@ -278,7 +284,7 @@ static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>                 helper_msg.address = segment_address;
>                 helper_msg.buffer = &aux->segment;
>                 helper_msg.size = 1;
> -               dp_aux_cmd_fifo_tx(aux, &helper_msg);
> +               dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>         }
>
>         /*
> @@ -292,7 +298,7 @@ static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>         helper_msg.address = input_msg->address;
>         helper_msg.buffer = &aux->offset;
>         helper_msg.size = 1;
> -       dp_aux_cmd_fifo_tx(aux, &helper_msg);
> +       dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>
>  end:
>         aux->offset += message_size;
> @@ -300,6 +306,122 @@ static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>                 aux->segment = 0x0; /* reset segment at end of block */
>  }
>
> +/*
> + * This function does the real job to process an AUX transaction.
> + * It will call aux_reset() function to reset the AUX channel,
> + * if the waiting is timeout.
> + */
> +static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
> +                              struct drm_dp_aux_msg *msg)
> +{
> +       ssize_t ret;
> +       int const aux_cmd_native_max = 16;
> +       int const aux_cmd_i2c_max = 128;
> +       struct dp_aux_private *aux;
> +
> +       aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> +
> +       aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
> +
> +       /* Ignore address only message */
> +       if (msg->size == 0 || !msg->buffer) {
> +               msg->reply = aux->native ?
> +                       DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> +               return msg->size;
> +       }
> +
> +       /* msg sanity check */
> +       if ((aux->native && msg->size > aux_cmd_native_max) ||
> +           msg->size > aux_cmd_i2c_max) {
> +               DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
> +                       __func__, msg->size, msg->request);
> +               return -EINVAL;
> +       }
> +
> +       mutex_lock(&aux->mutex);
> +       if (!aux->initted) {
> +               ret = -EIO;
> +               goto exit;
> +       }
> +
> +       /*
> +        * For eDP it's important to give a reasonably long wait here for HPD
> +        * to be asserted. This is because the panel driver may have _just_
> +        * turned on the panel and then tried to do an AUX transfer. The panel
> +        * driver has no way of knowing when the panel is ready, so it's up
> +        * to us to wait. For DP we never get into this situation so let's
> +        * avoid ever doing the extra long wait for DP.
> +        */
> +       if (aux->is_edp) {
> +               ret = dp_catalog_aux_wait_for_hpd_connect_state(aux->catalog);
> +               if (ret) {
> +                       DRM_DEBUG_DP("Panel not ready for aux transactions\n");
> +                       goto exit;
> +               }
> +       }
> +
> +       dp_aux_update_offset_and_segment(aux, msg);
> +       dp_aux_transfer_helper(aux, msg, true, true);
> +
> +       aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
> +       aux->cmd_busy = true;
> +
> +       if (aux->read) {
> +               aux->no_send_addr = true;
> +               aux->no_send_stop = false;
> +       } else {
> +               aux->no_send_addr = true;
> +               aux->no_send_stop = true;
> +       }
> +
> +       ret = dp_aux_cmd_fifo_tx(aux, msg, true);
> +
> +       /* TODO: why is fifo_rx necessary here?
> +        * Ideally fifo_rx need not be executed for an aux write
> +        */
> +       ret = dp_aux_cmd_fifo_rx(aux, msg);
> +
> +       if (ret < 0) {
> +               if (aux->native) {
> +                       aux->retry_cnt++;
> +                       if (!(aux->retry_cnt % MAX_AUX_RETRIES))
> +                               dp_catalog_aux_update_cfg(aux->catalog);
> +               }
> +               /* reset aux if link is in connected state */
> +               if (dp_catalog_link_is_connected(aux->catalog))
> +                       dp_catalog_aux_reset(aux->catalog);
> +       } else {
> +               aux->retry_cnt = 0;
> +               switch (aux->aux_error_num) {
> +               case DP_AUX_ERR_NONE:
> +                       if (aux->read)
> +                               ret = dp_aux_cmd_fifo_rx(aux, msg);
> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> +                       break;
> +               case DP_AUX_ERR_DEFER:
> +                       msg->reply = aux->native ?
> +                               DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
> +                       break;
> +               case DP_AUX_ERR_PHY:
> +               case DP_AUX_ERR_ADDR:
> +               case DP_AUX_ERR_NACK:
> +               case DP_AUX_ERR_NACK_DEFER:
> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK : DP_AUX_I2C_REPLY_NACK;
> +                       break;
> +               case DP_AUX_ERR_TOUT:
> +                       ret = -ETIMEDOUT;
> +                       break;
> +               }
> +       }
> +
> +       aux->cmd_busy = false;
> +
> +exit:
> +       mutex_unlock(&aux->mutex);
> +
> +       return ret;
> +}
> +
>  /*
>   * This function does the real job to process an AUX transaction.
>   * It will call aux_reset() function to reset the AUX channel,
> @@ -355,7 +477,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>         }
>
>         dp_aux_update_offset_and_segment(aux, msg);
> -       dp_aux_transfer_helper(aux, msg, true);
> +       dp_aux_transfer_helper(aux, msg, true, false);
>
>         aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
>         aux->cmd_busy = true;
> @@ -368,7 +490,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>                 aux->no_send_stop = true;
>         }
>
> -       ret = dp_aux_cmd_fifo_tx(aux, msg);
> +       ret = dp_aux_cmd_fifo_tx(aux, msg, false);
>         if (ret < 0) {
>                 if (aux->native) {
>                         aux->retry_cnt++;
> @@ -535,6 +657,15 @@ struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
>         aux->catalog = catalog;
>         aux->retry_cnt = 0;
>
> +       /*
> +        * Use the drm_dp_aux_init() to use the aux adapter
> +        * before registering aux with the DRM device.
> +        */
> +       aux->dp_aux.name = "dpu_dp_aux";
> +       aux->dp_aux.dev = dev;
> +       aux->dp_aux.transfer = dp_aux_transfer_init;
> +       drm_dp_aux_init(&aux->dp_aux);

How do you use the aux adapter? It should not be used before
aux->drm_dev is setup.

> +
>         return &aux->dp_aux;
>  }
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
> index 676279d0ca8d..ccf0400176f0 100644
> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> @@ -258,6 +258,18 @@ int dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog *dp_catalog)
>                                 2000, 500000);
>  }
>
> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog *dp_catalog)
> +{
> +       u32 aux;
> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
> +                               struct dp_catalog_private, dp_catalog);
> +
> +       return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
> +                               REG_DP_INTR_STATUS,
> +                               aux, aux & DP_INTERRUPT_STATUS1,
> +                               250, 250000);
> +}
> +
>  static void dump_regs(void __iomem *base, int len)
>  {
>         int i;
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h b/drivers/gpu/drm/msm/dp/dp_catalog.h
> index 1f717f45c115..ad4a9e0f71f2 100644
> --- a/drivers/gpu/drm/msm/dp/dp_catalog.h
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
> @@ -87,6 +87,7 @@ void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable);
>  void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog);
>  int dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog *dp_catalog);
>  u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog *dp_catalog);
>
>  /* DP Controller APIs */
>  void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state);
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index bde1a7ce442f..a5dcef040b74 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -275,13 +275,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
>         dp->dp_display.drm_dev = drm;
>         priv->dp[dp->id] = &dp->dp_display;
>
> -       rc = dp->parser->parse(dp->parser);
> -       if (rc) {
> -               DRM_ERROR("device tree parsing failed\n");
> -               goto end;
> -       }
> -
> -
>         dp->drm_dev = drm;
>         dp->aux->drm_dev = drm;
>         rc = dp_aux_register(dp->aux);
> @@ -290,12 +283,6 @@ static int dp_display_bind(struct device *dev, struct device *master,
>                 goto end;
>         }
>
> -       rc = dp_power_client_init(dp->power);
> -       if (rc) {
> -               DRM_ERROR("Power client create failed\n");
> -               goto end;
> -       }
> -
>         rc = dp_register_audio_driver(dev, dp->audio);
>         if (rc) {
>                 DRM_ERROR("Audio registration Dp failed\n");
> @@ -787,6 +774,12 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
>                 goto error;
>         }
>
> +       rc = dp->parser->parse(dp->parser);
> +       if (rc) {
> +               DRM_ERROR("device tree parsing failed\n");
> +               goto error;
> +       }
> +
>         dp->catalog = dp_catalog_get(dev, &dp->parser->io);
>         if (IS_ERR(dp->catalog)) {
>                 rc = PTR_ERR(dp->catalog);
> @@ -803,6 +796,12 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
>                 goto error;
>         }
>
> +       rc = dp_power_client_init(dp->power);
> +       if (rc) {
> +               DRM_ERROR("Power client create failed\n");
> +               goto error;
> +       }
> +
>         dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
>         if (IS_ERR(dp->aux)) {
>                 rc = PTR_ERR(dp->aux);
> @@ -1338,12 +1337,29 @@ static int dp_display_probe(struct platform_device *pdev)
>
>         platform_set_drvdata(pdev, &dp->dp_display);
>
> +       if (dp->dp_display.is_edp) {
> +               dp_display_host_init(dp);
> +               dp_display_host_phy_init(dp);
> +               dp_catalog_ctrl_hpd_config(dp->catalog);
> +
> +               rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);

You should pass a real done_probing handler here, if you are going to
refactor this piece of code. The done_probing should then shut down
the resources and bind the component.

> +
> +               dp_display_host_phy_exit(dp);
> +               dp_display_host_deinit(dp);
> +
> +               if (rc) {
> +                       DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
> +                       goto error;
> +               }
> +       }
> +
>         rc = component_add(&pdev->dev, &dp_display_comp_ops);
>         if (rc) {
>                 DRM_ERROR("component add failed, rc=%d\n", rc);
>                 dp_display_deinit_sub_modules(dp);
>         }
>
> +error:
>         return rc;
>  }
>
> @@ -1546,40 +1562,8 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
>  {
>         int rc;
>         struct dp_display_private *dp_priv;
> -       struct device_node *aux_bus;
> -       struct device *dev;
>
>         dp_priv = container_of(dp, struct dp_display_private, dp_display);
> -       dev = &dp_priv->pdev->dev;
> -       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
> -
> -       if (aux_bus && dp->is_edp) {
> -               dp_display_host_init(dp_priv);
> -               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
> -               dp_display_host_phy_init(dp_priv);
> -               enable_irq(dp_priv->irq);
> -
> -               /*
> -                * The code below assumes that the panel will finish probing
> -                * by the time devm_of_dp_aux_populate_ep_devices() returns.
> -                * This isn't a great assumption since it will fail if the
> -                * panel driver is probed asynchronously but is the best we
> -                * can do without a bigger driver reorganization.
> -                */
> -               rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
> -               of_node_put(aux_bus);
> -               if (rc)
> -                       goto error;
> -
> -               rc = devm_add_action_or_reset(dp->drm_dev->dev,
> -                                               of_dp_aux_depopulate_bus_void,
> -                                               dp_priv->aux);
> -               if (rc)
> -                       goto error;
> -       } else if (dp->is_edp) {
> -               DRM_ERROR("eDP aux_bus not found\n");
> -               return -ENODEV;
> -       }
>
>         /*
>          * External bridges are mandatory for eDP interfaces: one has to
> @@ -1597,12 +1581,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
>                 return 0;
>         }
>
> -error:
> -       if (dp->is_edp) {
> -               disable_irq(dp_priv->irq);
> -               dp_display_host_phy_exit(dp_priv);
> -               dp_display_host_deinit(dp_priv);
> -       }
>         return rc;
>  }
>
> --
> 2.39.0
>
Sankeerth Billakanti (QUIC) March 1, 2023, 8:13 a.m. UTC | #2
>>
>> The eDP panel is identified and enumerated during probe of the
>> panel-edp driver. The current DP driver triggers this panel-edp driver
>> probe while getting the panel-bridge associated with the eDP panel
>> from the platform driver bind. If the panel-edp probe is deferred,
>> then the whole bunch of MDSS parent and child drivers have to defer and
>roll back.
>
>No, MDSS has not been rolled back since 5.19. Please shift your development
>on top of the current msm-next.
>

Okay, I will move to the msm-next tip.

>>
>> So, we want to move the panel enumeration from bind to probe so that
>> the probe defer is easier to handle and also both the drivers appear
>> consistent in panel enumeration. This change moves the DP driver
>> panel-bridge enumeration to probe.
>>
>> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
>> ---
>>  drivers/gpu/drm/msm/dp/dp_aux.c     | 149
>++++++++++++++++++++++++++--
>>  drivers/gpu/drm/msm/dp/dp_catalog.c |  12 +++
>>  drivers/gpu/drm/msm/dp/dp_catalog.h |   1 +
>>  drivers/gpu/drm/msm/dp/dp_display.c |  80 ++++++---------
>>  4 files changed, 182 insertions(+), 60 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>> b/drivers/gpu/drm/msm/dp/dp_aux.c index cc3efed593aa..5da95dfdeede
>> 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> @@ -110,7 +110,7 @@ static ssize_t dp_aux_write(struct dp_aux_private
>> *aux,  }
>>
>>  static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
>> -                             struct drm_dp_aux_msg *msg)
>> +                             struct drm_dp_aux_msg *msg, bool poll)
>
>What is the reason for working in polled mode rather than always using the
>interrupts?
>

The mdss interrupts will be enabled and can be used after msm_irq_install from msm_drm_bind.
We want to perform aux transactions during probe. The aux data transmission is followed by an
interrupt to indicate successful transmission status and reply information.

As interrupts are not enabled, I took this polling approach for aux interrupts during probe.

>>  {
>>         ssize_t ret;
>>         unsigned long time_left;
>> @@ -121,10 +121,16 @@ static ssize_t dp_aux_cmd_fifo_tx(struct
>dp_aux_private *aux,
>>         if (ret < 0)
>>                 return ret;
>>
>> -       time_left = wait_for_completion_timeout(&aux->comp,
>> +       if (!poll) {
>> +               time_left = wait_for_completion_timeout(&aux->comp,
>>                                                 msecs_to_jiffies(250));
>> -       if (!time_left)
>> -               return -ETIMEDOUT;
>> +               if (!time_left)
>> +                       return -ETIMEDOUT;
>> +       } else {
>> +               ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux->catalog);
>> +               if (!ret)
>> +                       dp_aux_isr(&aux->dp_aux);
>> +       }
>>
>>         return ret;
>>  }
>> @@ -238,7 +244,7 @@ static void
>dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
>>   */
>>  static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>>                                    struct drm_dp_aux_msg *input_msg,
>> -                                  bool send_seg)
>> +                                  bool send_seg, bool poll)
>>  {
>>         struct drm_dp_aux_msg helper_msg;
>>         u32 message_size = 0x10;
>> @@ -278,7 +284,7 @@ static void dp_aux_transfer_helper(struct
>dp_aux_private *aux,
>>                 helper_msg.address = segment_address;
>>                 helper_msg.buffer = &aux->segment;
>>                 helper_msg.size = 1;
>> -               dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +               dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>         }
>>
>>         /*
>> @@ -292,7 +298,7 @@ static void dp_aux_transfer_helper(struct
>dp_aux_private *aux,
>>         helper_msg.address = input_msg->address;
>>         helper_msg.buffer = &aux->offset;
>>         helper_msg.size = 1;
>> -       dp_aux_cmd_fifo_tx(aux, &helper_msg);
>> +       dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>
>>  end:
>>         aux->offset += message_size;
>> @@ -300,6 +306,122 @@ static void dp_aux_transfer_helper(struct
>dp_aux_private *aux,
>>                 aux->segment = 0x0; /* reset segment at end of block
>> */  }
>>
>> +/*
>> + * This function does the real job to process an AUX transaction.
>> + * It will call aux_reset() function to reset the AUX channel,
>> + * if the waiting is timeout.
>> + */
>> +static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
>> +                              struct drm_dp_aux_msg *msg) {
>> +       ssize_t ret;
>> +       int const aux_cmd_native_max = 16;
>> +       int const aux_cmd_i2c_max = 128;
>> +       struct dp_aux_private *aux;
>> +
>> +       aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>> +
>> +       aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
>> + DP_AUX_NATIVE_READ);
>> +
>> +       /* Ignore address only message */
>> +       if (msg->size == 0 || !msg->buffer) {
>> +               msg->reply = aux->native ?
>> +                       DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>> +               return msg->size;
>> +       }
>> +
>> +       /* msg sanity check */
>> +       if ((aux->native && msg->size > aux_cmd_native_max) ||
>> +           msg->size > aux_cmd_i2c_max) {
>> +               DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
>> +                       __func__, msg->size, msg->request);
>> +               return -EINVAL;
>> +       }
>> +
>> +       mutex_lock(&aux->mutex);
>> +       if (!aux->initted) {
>> +               ret = -EIO;
>> +               goto exit;
>> +       }
>> +
>> +       /*
>> +        * For eDP it's important to give a reasonably long wait here for HPD
>> +        * to be asserted. This is because the panel driver may have _just_
>> +        * turned on the panel and then tried to do an AUX transfer. The panel
>> +        * driver has no way of knowing when the panel is ready, so it's up
>> +        * to us to wait. For DP we never get into this situation so let's
>> +        * avoid ever doing the extra long wait for DP.
>> +        */
>> +       if (aux->is_edp) {
>> +               ret = dp_catalog_aux_wait_for_hpd_connect_state(aux->catalog);
>> +               if (ret) {
>> +                       DRM_DEBUG_DP("Panel not ready for aux transactions\n");
>> +                       goto exit;
>> +               }
>> +       }
>> +
>> +       dp_aux_update_offset_and_segment(aux, msg);
>> +       dp_aux_transfer_helper(aux, msg, true, true);
>> +
>> +       aux->read = msg->request & (DP_AUX_I2C_READ &
>DP_AUX_NATIVE_READ);
>> +       aux->cmd_busy = true;
>> +
>> +       if (aux->read) {
>> +               aux->no_send_addr = true;
>> +               aux->no_send_stop = false;
>> +       } else {
>> +               aux->no_send_addr = true;
>> +               aux->no_send_stop = true;
>> +       }
>> +
>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, true);
>> +
>> +       /* TODO: why is fifo_rx necessary here?
>> +        * Ideally fifo_rx need not be executed for an aux write
>> +        */
>> +       ret = dp_aux_cmd_fifo_rx(aux, msg);
>> +
>> +       if (ret < 0) {
>> +               if (aux->native) {
>> +                       aux->retry_cnt++;
>> +                       if (!(aux->retry_cnt % MAX_AUX_RETRIES))
>> +                               dp_catalog_aux_update_cfg(aux->catalog);
>> +               }
>> +               /* reset aux if link is in connected state */
>> +               if (dp_catalog_link_is_connected(aux->catalog))
>> +                       dp_catalog_aux_reset(aux->catalog);
>> +       } else {
>> +               aux->retry_cnt = 0;
>> +               switch (aux->aux_error_num) {
>> +               case DP_AUX_ERR_NONE:
>> +                       if (aux->read)
>> +                               ret = dp_aux_cmd_fifo_rx(aux, msg);
>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK :
>DP_AUX_I2C_REPLY_ACK;
>> +                       break;
>> +               case DP_AUX_ERR_DEFER:
>> +                       msg->reply = aux->native ?
>> +                               DP_AUX_NATIVE_REPLY_DEFER :
>DP_AUX_I2C_REPLY_DEFER;
>> +                       break;
>> +               case DP_AUX_ERR_PHY:
>> +               case DP_AUX_ERR_ADDR:
>> +               case DP_AUX_ERR_NACK:
>> +               case DP_AUX_ERR_NACK_DEFER:
>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK :
>DP_AUX_I2C_REPLY_NACK;
>> +                       break;
>> +               case DP_AUX_ERR_TOUT:
>> +                       ret = -ETIMEDOUT;
>> +                       break;
>> +               }
>> +       }
>> +
>> +       aux->cmd_busy = false;
>> +
>> +exit:
>> +       mutex_unlock(&aux->mutex);
>> +
>> +       return ret;
>> +}
>> +
>>  /*
>>   * This function does the real job to process an AUX transaction.
>>   * It will call aux_reset() function to reset the AUX channel, @@
>> -355,7 +477,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>*dp_aux,
>>         }
>>
>>         dp_aux_update_offset_and_segment(aux, msg);
>> -       dp_aux_transfer_helper(aux, msg, true);
>> +       dp_aux_transfer_helper(aux, msg, true, false);
>>
>>         aux->read = msg->request & (DP_AUX_I2C_READ &
>DP_AUX_NATIVE_READ);
>>         aux->cmd_busy = true;
>> @@ -368,7 +490,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>*dp_aux,
>>                 aux->no_send_stop = true;
>>         }
>>
>> -       ret = dp_aux_cmd_fifo_tx(aux, msg);
>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, false);
>>         if (ret < 0) {
>>                 if (aux->native) {
>>                         aux->retry_cnt++; @@ -535,6 +657,15 @@ struct
>> drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
>>         aux->catalog = catalog;
>>         aux->retry_cnt = 0;
>>
>> +       /*
>> +        * Use the drm_dp_aux_init() to use the aux adapter
>> +        * before registering aux with the DRM device.
>> +        */
>> +       aux->dp_aux.name = "dpu_dp_aux";
>> +       aux->dp_aux.dev = dev;
>> +       aux->dp_aux.transfer = dp_aux_transfer_init;
>> +       drm_dp_aux_init(&aux->dp_aux);
>
>How do you use the aux adapter? It should not be used before
>aux->drm_dev is setup.
>

The drm_dev registration happens during the bind. But we need to use aux during probe.

The kernel doc for the drm_dp_aux_init function suggested we can use the adapter before
drm_dev registration. So, I used this function to enable the aux usage during probe.

/**
 * drm_dp_aux_init() - minimally initialise an aux channel
 * @aux: DisplayPort AUX channel
 *
 * If you need to use the drm_dp_aux's i2c adapter prior to registering it with
 * the outside world, call drm_dp_aux_init() first.

>> +
>>         return &aux->dp_aux;
>>  }
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> index 676279d0ca8d..ccf0400176f0 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
>> @@ -258,6 +258,18 @@ int
>dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>*dp_catalog)
>>                                 2000, 500000);  }
>>
>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>> +*dp_catalog) {
>> +       u32 aux;
>> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
>> +                               struct dp_catalog_private,
>> +dp_catalog);
>> +
>> +       return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
>> +                               REG_DP_INTR_STATUS,
>> +                               aux, aux & DP_INTERRUPT_STATUS1,
>> +                               250, 250000); }
>> +
>>  static void dump_regs(void __iomem *base, int len)  {
>>         int i;
>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> index 1f717f45c115..ad4a9e0f71f2 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.h
>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
>> @@ -87,6 +87,7 @@ void dp_catalog_aux_enable(struct dp_catalog
>> *dp_catalog, bool enable);  void dp_catalog_aux_update_cfg(struct
>> dp_catalog *dp_catalog);  int
>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>> *dp_catalog);
>>  u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>> +*dp_catalog);
>>
>>  /* DP Controller APIs */
>>  void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>> state); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> index bde1a7ce442f..a5dcef040b74 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -275,13 +275,6 @@ static int dp_display_bind(struct device *dev, struct
>device *master,
>>         dp->dp_display.drm_dev = drm;
>>         priv->dp[dp->id] = &dp->dp_display;
>>
>> -       rc = dp->parser->parse(dp->parser);
>> -       if (rc) {
>> -               DRM_ERROR("device tree parsing failed\n");
>> -               goto end;
>> -       }
>> -
>> -
>>         dp->drm_dev = drm;
>>         dp->aux->drm_dev = drm;
>>         rc = dp_aux_register(dp->aux); @@ -290,12 +283,6 @@ static int
>> dp_display_bind(struct device *dev, struct device *master,
>>                 goto end;
>>         }
>>
>> -       rc = dp_power_client_init(dp->power);
>> -       if (rc) {
>> -               DRM_ERROR("Power client create failed\n");
>> -               goto end;
>> -       }
>> -
>>         rc = dp_register_audio_driver(dev, dp->audio);
>>         if (rc) {
>>                 DRM_ERROR("Audio registration Dp failed\n"); @@ -787,6
>> +774,12 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
>>                 goto error;
>>         }
>>
>> +       rc = dp->parser->parse(dp->parser);
>> +       if (rc) {
>> +               DRM_ERROR("device tree parsing failed\n");
>> +               goto error;
>> +       }
>> +
>>         dp->catalog = dp_catalog_get(dev, &dp->parser->io);
>>         if (IS_ERR(dp->catalog)) {
>>                 rc = PTR_ERR(dp->catalog); @@ -803,6 +796,12 @@ static
>> int dp_init_sub_modules(struct dp_display_private *dp)
>>                 goto error;
>>         }
>>
>> +       rc = dp_power_client_init(dp->power);
>> +       if (rc) {
>> +               DRM_ERROR("Power client create failed\n");
>> +               goto error;
>> +       }
>> +
>>         dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
>>         if (IS_ERR(dp->aux)) {
>>                 rc = PTR_ERR(dp->aux); @@ -1338,12 +1337,29 @@ static
>> int dp_display_probe(struct platform_device *pdev)
>>
>>         platform_set_drvdata(pdev, &dp->dp_display);
>>
>> +       if (dp->dp_display.is_edp) {
>> +               dp_display_host_init(dp);
>> +               dp_display_host_phy_init(dp);
>> +               dp_catalog_ctrl_hpd_config(dp->catalog);
>> +
>> +               rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);
>
>You should pass a real done_probing handler here, if you are going to refactor
>this piece of code. The done_probing should then shut down the resources
>and bind the component.
>

I removed the resource enabling part from probe in the next patch where I implemented pm_runtime_ops.
I moved the host_init, phy_init and hpd_config into runtime_resume and calling pm_runtime_get_sync from aux_transfer.

>> +
>> +               dp_display_host_phy_exit(dp);
>> +               dp_display_host_deinit(dp);
>> +
>> +               if (rc) {
>> +                       DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
>> +                       goto error;
>> +               }
>> +       }
>> +
>>         rc = component_add(&pdev->dev, &dp_display_comp_ops);
>>         if (rc) {
>>                 DRM_ERROR("component add failed, rc=%d\n", rc);
>>                 dp_display_deinit_sub_modules(dp);
>>         }
>>
>> +error:
>>         return rc;
>>  }
>>
>> @@ -1546,40 +1562,8 @@ static int dp_display_get_next_bridge(struct
>> msm_dp *dp)  {
>>         int rc;
>>         struct dp_display_private *dp_priv;
>> -       struct device_node *aux_bus;
>> -       struct device *dev;
>>
>>         dp_priv = container_of(dp, struct dp_display_private, dp_display);
>> -       dev = &dp_priv->pdev->dev;
>> -       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>> -
>> -       if (aux_bus && dp->is_edp) {
>> -               dp_display_host_init(dp_priv);
>> -               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
>> -               dp_display_host_phy_init(dp_priv);
>> -               enable_irq(dp_priv->irq);
>> -
>> -               /*
>> -                * The code below assumes that the panel will finish probing
>> -                * by the time devm_of_dp_aux_populate_ep_devices() returns.
>> -                * This isn't a great assumption since it will fail if the
>> -                * panel driver is probed asynchronously but is the best we
>> -                * can do without a bigger driver reorganization.
>> -                */
>> -               rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
>> -               of_node_put(aux_bus);
>> -               if (rc)
>> -                       goto error;
>> -
>> -               rc = devm_add_action_or_reset(dp->drm_dev->dev,
>> -                                               of_dp_aux_depopulate_bus_void,
>> -                                               dp_priv->aux);
>> -               if (rc)
>> -                       goto error;
>> -       } else if (dp->is_edp) {
>> -               DRM_ERROR("eDP aux_bus not found\n");
>> -               return -ENODEV;
>> -       }
>>
>>         /*
>>          * External bridges are mandatory for eDP interfaces: one has
>> to @@ -1597,12 +1581,6 @@ static int dp_display_get_next_bridge(struct
>msm_dp *dp)
>>                 return 0;
>>         }
>>
>> -error:
>> -       if (dp->is_edp) {
>> -               disable_irq(dp_priv->irq);
>> -               dp_display_host_phy_exit(dp_priv);
>> -               dp_display_host_deinit(dp_priv);
>> -       }
>>         return rc;
>>  }
>>
>> --
>> 2.39.0
>>
>
>
>--
>With best wishes
>Dmitry
Dmitry Baryshkov March 1, 2023, 10:37 a.m. UTC | #3
On 01/03/2023 10:13, Sankeerth Billakanti (QUIC) wrote:
>>>
>>> The eDP panel is identified and enumerated during probe of the
>>> panel-edp driver. The current DP driver triggers this panel-edp driver
>>> probe while getting the panel-bridge associated with the eDP panel
>>> from the platform driver bind. If the panel-edp probe is deferred,
>>> then the whole bunch of MDSS parent and child drivers have to defer and
>> roll back.
>>
>> No, MDSS has not been rolled back since 5.19. Please shift your development
>> on top of the current msm-next.
>>
> 
> Okay, I will move to the msm-next tip.
> 
>>>
>>> So, we want to move the panel enumeration from bind to probe so that
>>> the probe defer is easier to handle and also both the drivers appear
>>> consistent in panel enumeration. This change moves the DP driver
>>> panel-bridge enumeration to probe.
>>>
>>> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
>>> ---
>>>   drivers/gpu/drm/msm/dp/dp_aux.c     | 149
>> ++++++++++++++++++++++++++--
>>>   drivers/gpu/drm/msm/dp/dp_catalog.c |  12 +++
>>>   drivers/gpu/drm/msm/dp/dp_catalog.h |   1 +
>>>   drivers/gpu/drm/msm/dp/dp_display.c |  80 ++++++---------
>>>   4 files changed, 182 insertions(+), 60 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>>> b/drivers/gpu/drm/msm/dp/dp_aux.c index cc3efed593aa..5da95dfdeede
>>> 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>>> @@ -110,7 +110,7 @@ static ssize_t dp_aux_write(struct dp_aux_private
>>> *aux,  }
>>>
>>>   static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
>>> -                             struct drm_dp_aux_msg *msg)
>>> +                             struct drm_dp_aux_msg *msg, bool poll)
>>
>> What is the reason for working in polled mode rather than always using the
>> interrupts?
>>
> 
> The mdss interrupts will be enabled and can be used after msm_irq_install from msm_drm_bind.
> We want to perform aux transactions during probe. The aux data transmission is followed by an
> interrupt to indicate successful transmission status and reply information.

This is the price of developing on, let me guess, 5.15. Nowadays MDSS 
interrupts are enabled and can be used during dp_display_probe() and 
dp_display_bind(). If they can not for some reason, this is an issue 
that must be fixed. Please reconsider your approach after rebasing onto 
msm-next or 6.3-rc1.

> 
> As interrupts are not enabled, I took this polling approach for aux interrupts during probe.
> 
>>>   {
>>>          ssize_t ret;
>>>          unsigned long time_left;
>>> @@ -121,10 +121,16 @@ static ssize_t dp_aux_cmd_fifo_tx(struct
>> dp_aux_private *aux,
>>>          if (ret < 0)
>>>                  return ret;
>>>
>>> -       time_left = wait_for_completion_timeout(&aux->comp,
>>> +       if (!poll) {
>>> +               time_left = wait_for_completion_timeout(&aux->comp,
>>>                                                  msecs_to_jiffies(250));
>>> -       if (!time_left)
>>> -               return -ETIMEDOUT;
>>> +               if (!time_left)
>>> +                       return -ETIMEDOUT;
>>> +       } else {
>>> +               ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux->catalog);
>>> +               if (!ret)
>>> +                       dp_aux_isr(&aux->dp_aux);
>>> +       }
>>>
>>>          return ret;
>>>   }
>>> @@ -238,7 +244,7 @@ static void
>> dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
>>>    */
>>>   static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>>>                                     struct drm_dp_aux_msg *input_msg,
>>> -                                  bool send_seg)
>>> +                                  bool send_seg, bool poll)
>>>   {
>>>          struct drm_dp_aux_msg helper_msg;
>>>          u32 message_size = 0x10;
>>> @@ -278,7 +284,7 @@ static void dp_aux_transfer_helper(struct
>> dp_aux_private *aux,
>>>                  helper_msg.address = segment_address;
>>>                  helper_msg.buffer = &aux->segment;
>>>                  helper_msg.size = 1;
>>> -               dp_aux_cmd_fifo_tx(aux, &helper_msg);
>>> +               dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>>          }
>>>
>>>          /*
>>> @@ -292,7 +298,7 @@ static void dp_aux_transfer_helper(struct
>> dp_aux_private *aux,
>>>          helper_msg.address = input_msg->address;
>>>          helper_msg.buffer = &aux->offset;
>>>          helper_msg.size = 1;
>>> -       dp_aux_cmd_fifo_tx(aux, &helper_msg);
>>> +       dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>>
>>>   end:
>>>          aux->offset += message_size;
>>> @@ -300,6 +306,122 @@ static void dp_aux_transfer_helper(struct
>> dp_aux_private *aux,
>>>                  aux->segment = 0x0; /* reset segment at end of block
>>> */  }
>>>
>>> +/*
>>> + * This function does the real job to process an AUX transaction.
>>> + * It will call aux_reset() function to reset the AUX channel,
>>> + * if the waiting is timeout.
>>> + */
>>> +static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
>>> +                              struct drm_dp_aux_msg *msg) {
>>> +       ssize_t ret;
>>> +       int const aux_cmd_native_max = 16;
>>> +       int const aux_cmd_i2c_max = 128;
>>> +       struct dp_aux_private *aux;
>>> +
>>> +       aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>>> +
>>> +       aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
>>> + DP_AUX_NATIVE_READ);
>>> +
>>> +       /* Ignore address only message */
>>> +       if (msg->size == 0 || !msg->buffer) {
>>> +               msg->reply = aux->native ?
>>> +                       DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>>> +               return msg->size;
>>> +       }
>>> +
>>> +       /* msg sanity check */
>>> +       if ((aux->native && msg->size > aux_cmd_native_max) ||
>>> +           msg->size > aux_cmd_i2c_max) {
>>> +               DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
>>> +                       __func__, msg->size, msg->request);
>>> +               return -EINVAL;
>>> +       }
>>> +
>>> +       mutex_lock(&aux->mutex);
>>> +       if (!aux->initted) {
>>> +               ret = -EIO;
>>> +               goto exit;
>>> +       }
>>> +
>>> +       /*
>>> +        * For eDP it's important to give a reasonably long wait here for HPD
>>> +        * to be asserted. This is because the panel driver may have _just_
>>> +        * turned on the panel and then tried to do an AUX transfer. The panel
>>> +        * driver has no way of knowing when the panel is ready, so it's up
>>> +        * to us to wait. For DP we never get into this situation so let's
>>> +        * avoid ever doing the extra long wait for DP.
>>> +        */
>>> +       if (aux->is_edp) {
>>> +               ret = dp_catalog_aux_wait_for_hpd_connect_state(aux->catalog);
>>> +               if (ret) {
>>> +                       DRM_DEBUG_DP("Panel not ready for aux transactions\n");
>>> +                       goto exit;
>>> +               }
>>> +       }
>>> +
>>> +       dp_aux_update_offset_and_segment(aux, msg);
>>> +       dp_aux_transfer_helper(aux, msg, true, true);
>>> +
>>> +       aux->read = msg->request & (DP_AUX_I2C_READ &
>> DP_AUX_NATIVE_READ);
>>> +       aux->cmd_busy = true;
>>> +
>>> +       if (aux->read) {
>>> +               aux->no_send_addr = true;
>>> +               aux->no_send_stop = false;
>>> +       } else {
>>> +               aux->no_send_addr = true;
>>> +               aux->no_send_stop = true;
>>> +       }
>>> +
>>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, true);
>>> +
>>> +       /* TODO: why is fifo_rx necessary here?
>>> +        * Ideally fifo_rx need not be executed for an aux write
>>> +        */
>>> +       ret = dp_aux_cmd_fifo_rx(aux, msg);
>>> +
>>> +       if (ret < 0) {
>>> +               if (aux->native) {
>>> +                       aux->retry_cnt++;
>>> +                       if (!(aux->retry_cnt % MAX_AUX_RETRIES))
>>> +                               dp_catalog_aux_update_cfg(aux->catalog);
>>> +               }
>>> +               /* reset aux if link is in connected state */
>>> +               if (dp_catalog_link_is_connected(aux->catalog))
>>> +                       dp_catalog_aux_reset(aux->catalog);
>>> +       } else {
>>> +               aux->retry_cnt = 0;
>>> +               switch (aux->aux_error_num) {
>>> +               case DP_AUX_ERR_NONE:
>>> +                       if (aux->read)
>>> +                               ret = dp_aux_cmd_fifo_rx(aux, msg);
>>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK :
>> DP_AUX_I2C_REPLY_ACK;
>>> +                       break;
>>> +               case DP_AUX_ERR_DEFER:
>>> +                       msg->reply = aux->native ?
>>> +                               DP_AUX_NATIVE_REPLY_DEFER :
>> DP_AUX_I2C_REPLY_DEFER;
>>> +                       break;
>>> +               case DP_AUX_ERR_PHY:
>>> +               case DP_AUX_ERR_ADDR:
>>> +               case DP_AUX_ERR_NACK:
>>> +               case DP_AUX_ERR_NACK_DEFER:
>>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK :
>> DP_AUX_I2C_REPLY_NACK;
>>> +                       break;
>>> +               case DP_AUX_ERR_TOUT:
>>> +                       ret = -ETIMEDOUT;
>>> +                       break;
>>> +               }
>>> +       }
>>> +
>>> +       aux->cmd_busy = false;
>>> +
>>> +exit:
>>> +       mutex_unlock(&aux->mutex);
>>> +
>>> +       return ret;
>>> +}
>>> +
>>>   /*
>>>    * This function does the real job to process an AUX transaction.
>>>    * It will call aux_reset() function to reset the AUX channel, @@
>>> -355,7 +477,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>> *dp_aux,
>>>          }
>>>
>>>          dp_aux_update_offset_and_segment(aux, msg);
>>> -       dp_aux_transfer_helper(aux, msg, true);
>>> +       dp_aux_transfer_helper(aux, msg, true, false);
>>>
>>>          aux->read = msg->request & (DP_AUX_I2C_READ &
>> DP_AUX_NATIVE_READ);
>>>          aux->cmd_busy = true;
>>> @@ -368,7 +490,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>> *dp_aux,
>>>                  aux->no_send_stop = true;
>>>          }
>>>
>>> -       ret = dp_aux_cmd_fifo_tx(aux, msg);
>>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, false);
>>>          if (ret < 0) {
>>>                  if (aux->native) {
>>>                          aux->retry_cnt++; @@ -535,6 +657,15 @@ struct
>>> drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
>>>          aux->catalog = catalog;
>>>          aux->retry_cnt = 0;
>>>
>>> +       /*
>>> +        * Use the drm_dp_aux_init() to use the aux adapter
>>> +        * before registering aux with the DRM device.
>>> +        */
>>> +       aux->dp_aux.name = "dpu_dp_aux";
>>> +       aux->dp_aux.dev = dev;
>>> +       aux->dp_aux.transfer = dp_aux_transfer_init;
>>> +       drm_dp_aux_init(&aux->dp_aux);
>>
>> How do you use the aux adapter? It should not be used before
>> aux->drm_dev is setup.
>>
> 
> The drm_dev registration happens during the bind. But we need to use aux during probe.
> 
> The kernel doc for the drm_dp_aux_init function suggested we can use the adapter before
> drm_dev registration. So, I used this function to enable the aux usage during probe.

Then please also change __drm_printk() to use (drm) ? (drm->dev) : NULL 
as a first argument to dev_##level##type. Otherwise the first AUX 
transfer error before aux->drm_dev is set will oops the kernel. See how 
drm_err() is expanded.

> 
> /**
>   * drm_dp_aux_init() - minimally initialise an aux channel
>   * @aux: DisplayPort AUX channel
>   *
>   * If you need to use the drm_dp_aux's i2c adapter prior to registering it with
>   * the outside world, call drm_dp_aux_init() first.
> 
>>> +
>>>          return &aux->dp_aux;
>>>   }
>>>
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
>>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
>>> index 676279d0ca8d..ccf0400176f0 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
>>> @@ -258,6 +258,18 @@ int
>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>> *dp_catalog)
>>>                                  2000, 500000);  }
>>>
>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>>> +*dp_catalog) {
>>> +       u32 aux;
>>> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
>>> +                               struct dp_catalog_private,
>>> +dp_catalog);
>>> +
>>> +       return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
>>> +                               REG_DP_INTR_STATUS,
>>> +                               aux, aux & DP_INTERRUPT_STATUS1,
>>> +                               250, 250000); }
>>> +
>>>   static void dump_regs(void __iomem *base, int len)  {
>>>          int i;
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
>>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
>>> index 1f717f45c115..ad4a9e0f71f2 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.h
>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
>>> @@ -87,6 +87,7 @@ void dp_catalog_aux_enable(struct dp_catalog
>>> *dp_catalog, bool enable);  void dp_catalog_aux_update_cfg(struct
>>> dp_catalog *dp_catalog);  int
>>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>>> *dp_catalog);
>>>   u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>>> +*dp_catalog);
>>>
>>>   /* DP Controller APIs */
>>>   void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>>> state); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>>> b/drivers/gpu/drm/msm/dp/dp_display.c
>>> index bde1a7ce442f..a5dcef040b74 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>>> @@ -275,13 +275,6 @@ static int dp_display_bind(struct device *dev, struct
>> device *master,
>>>          dp->dp_display.drm_dev = drm;
>>>          priv->dp[dp->id] = &dp->dp_display;
>>>
>>> -       rc = dp->parser->parse(dp->parser);
>>> -       if (rc) {
>>> -               DRM_ERROR("device tree parsing failed\n");
>>> -               goto end;
>>> -       }
>>> -
>>> -
>>>          dp->drm_dev = drm;
>>>          dp->aux->drm_dev = drm;
>>>          rc = dp_aux_register(dp->aux); @@ -290,12 +283,6 @@ static int
>>> dp_display_bind(struct device *dev, struct device *master,
>>>                  goto end;
>>>          }
>>>
>>> -       rc = dp_power_client_init(dp->power);
>>> -       if (rc) {
>>> -               DRM_ERROR("Power client create failed\n");
>>> -               goto end;
>>> -       }
>>> -
>>>          rc = dp_register_audio_driver(dev, dp->audio);
>>>          if (rc) {
>>>                  DRM_ERROR("Audio registration Dp failed\n"); @@ -787,6
>>> +774,12 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
>>>                  goto error;
>>>          }
>>>
>>> +       rc = dp->parser->parse(dp->parser);
>>> +       if (rc) {
>>> +               DRM_ERROR("device tree parsing failed\n");
>>> +               goto error;
>>> +       }
>>> +
>>>          dp->catalog = dp_catalog_get(dev, &dp->parser->io);
>>>          if (IS_ERR(dp->catalog)) {
>>>                  rc = PTR_ERR(dp->catalog); @@ -803,6 +796,12 @@ static
>>> int dp_init_sub_modules(struct dp_display_private *dp)
>>>                  goto error;
>>>          }
>>>
>>> +       rc = dp_power_client_init(dp->power);
>>> +       if (rc) {
>>> +               DRM_ERROR("Power client create failed\n");
>>> +               goto error;
>>> +       }
>>> +
>>>          dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
>>>          if (IS_ERR(dp->aux)) {
>>>                  rc = PTR_ERR(dp->aux); @@ -1338,12 +1337,29 @@ static
>>> int dp_display_probe(struct platform_device *pdev)
>>>
>>>          platform_set_drvdata(pdev, &dp->dp_display);
>>>
>>> +       if (dp->dp_display.is_edp) {
>>> +               dp_display_host_init(dp);
>>> +               dp_display_host_phy_init(dp);
>>> +               dp_catalog_ctrl_hpd_config(dp->catalog);
>>> +
>>> +               rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);
>>
>> You should pass a real done_probing handler here, if you are going to refactor
>> this piece of code. The done_probing should then shut down the resources
>> and bind the component.
>>
> 
> I removed the resource enabling part from probe in the next patch where I implemented pm_runtime_ops.
> I moved the host_init, phy_init and hpd_config into runtime_resume and calling pm_runtime_get_sync from aux_transfer.

Next patch doesn't exist at this point. So, please, either reorder them, 
or make this patch correct per se.

Also, the key part is a call to component_add(). It should come from 
done_probing callback. AUX bus probing is asynchronous. The kernel 
registers a device and then it might take some time for the correct 
driver to be loaded, etc. We clearly expect dp_display_bind to be used 
only when the panel has been probed.

> 
>>> +
>>> +               dp_display_host_phy_exit(dp);
>>> +               dp_display_host_deinit(dp);
>>> +
>>> +               if (rc) {
>>> +                       DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
>>> +                       goto error;
>>> +               }
>>> +       }
>>> +
>>>          rc = component_add(&pdev->dev, &dp_display_comp_ops);
>>>          if (rc) {
>>>                  DRM_ERROR("component add failed, rc=%d\n", rc);
>>>                  dp_display_deinit_sub_modules(dp);
>>>          }
>>>
>>> +error:
>>>          return rc;
>>>   }
>>>
>>> @@ -1546,40 +1562,8 @@ static int dp_display_get_next_bridge(struct
>>> msm_dp *dp)  {
>>>          int rc;
>>>          struct dp_display_private *dp_priv;
>>> -       struct device_node *aux_bus;
>>> -       struct device *dev;
>>>
>>>          dp_priv = container_of(dp, struct dp_display_private, dp_display);
>>> -       dev = &dp_priv->pdev->dev;
>>> -       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>>> -
>>> -       if (aux_bus && dp->is_edp) {
>>> -               dp_display_host_init(dp_priv);
>>> -               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
>>> -               dp_display_host_phy_init(dp_priv);
>>> -               enable_irq(dp_priv->irq);
>>> -
>>> -               /*
>>> -                * The code below assumes that the panel will finish probing
>>> -                * by the time devm_of_dp_aux_populate_ep_devices() returns.
>>> -                * This isn't a great assumption since it will fail if the
>>> -                * panel driver is probed asynchronously but is the best we
>>> -                * can do without a bigger driver reorganization.
>>> -                */
>>> -               rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
>>> -               of_node_put(aux_bus);
>>> -               if (rc)
>>> -                       goto error;
>>> -
>>> -               rc = devm_add_action_or_reset(dp->drm_dev->dev,
>>> -                                               of_dp_aux_depopulate_bus_void,
>>> -                                               dp_priv->aux);
>>> -               if (rc)
>>> -                       goto error;
>>> -       } else if (dp->is_edp) {
>>> -               DRM_ERROR("eDP aux_bus not found\n");
>>> -               return -ENODEV;
>>> -       }
>>>
>>>          /*
>>>           * External bridges are mandatory for eDP interfaces: one has
>>> to @@ -1597,12 +1581,6 @@ static int dp_display_get_next_bridge(struct
>> msm_dp *dp)
>>>                  return 0;
>>>          }
>>>
>>> -error:
>>> -       if (dp->is_edp) {
>>> -               disable_irq(dp_priv->irq);
>>> -               dp_display_host_phy_exit(dp_priv);
>>> -               dp_display_host_deinit(dp_priv);
>>> -       }
>>>          return rc;
>>>   }
>>>
>>> --
>>> 2.39.0
>>>
>>
>>
>> --
>> With best wishes
>> Dmitry
Sankeerth Billakanti (QUIC) March 14, 2023, 10:23 a.m. UTC | #4
Hi Dmitry,

>>>>
>>>> The eDP panel is identified and enumerated during probe of the
>>>> panel-edp driver. The current DP driver triggers this panel-edp
>>>> driver probe while getting the panel-bridge associated with the eDP
>>>> panel from the platform driver bind. If the panel-edp probe is
>>>> deferred, then the whole bunch of MDSS parent and child drivers have
>>>> to defer and
>>> roll back.
>>>
>>> No, MDSS has not been rolled back since 5.19. Please shift your
>>> development on top of the current msm-next.
>>>
>>
>> Okay, I will move to the msm-next tip.
>>
>>>>
>>>> So, we want to move the panel enumeration from bind to probe so that
>>>> the probe defer is easier to handle and also both the drivers appear
>>>> consistent in panel enumeration. This change moves the DP driver
>>>> panel-bridge enumeration to probe.
>>>>
>>>> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
>>>> ---
>>>>   drivers/gpu/drm/msm/dp/dp_aux.c     | 149
>>> ++++++++++++++++++++++++++--
>>>>   drivers/gpu/drm/msm/dp/dp_catalog.c |  12 +++
>>>>   drivers/gpu/drm/msm/dp/dp_catalog.h |   1 +
>>>>   drivers/gpu/drm/msm/dp/dp_display.c |  80 ++++++---------
>>>>   4 files changed, 182 insertions(+), 60 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>>>> b/drivers/gpu/drm/msm/dp/dp_aux.c index
>cc3efed593aa..5da95dfdeede
>>>> 100644
>>>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>>>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>>>> @@ -110,7 +110,7 @@ static ssize_t dp_aux_write(struct
>>>> dp_aux_private *aux,  }
>>>>
>>>>   static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
>>>> -                             struct drm_dp_aux_msg *msg)
>>>> +                             struct drm_dp_aux_msg *msg, bool poll)
>>>
>>> What is the reason for working in polled mode rather than always
>>> using the interrupts?
>>>
>>
>> The mdss interrupts will be enabled and can be used after msm_irq_install
>from msm_drm_bind.
>> We want to perform aux transactions during probe. The aux data
>> transmission is followed by an interrupt to indicate successful transmission
>status and reply information.
>
>This is the price of developing on, let me guess, 5.15. Nowadays MDSS
>interrupts are enabled and can be used during dp_display_probe() and
>dp_display_bind(). If they can not for some reason, this is an issue that must
>be fixed. Please reconsider your approach after rebasing onto msm-next or
>6.3-rc1.
>

On the msm-next also, I see the mdss irq is enabled from bind (in msm_drv.c). 
msm_drm_bind -> msm_drm_init -> msm_irq_install

Currently, interrupts will not be available during the dp_display_probe.
Is there a patch series which is enabling IRQs during mdss probe?

>>
>> As interrupts are not enabled, I took this polling approach for aux interrupts
>during probe.
>>
>>>>   {
>>>>          ssize_t ret;
>>>>          unsigned long time_left;
>>>> @@ -121,10 +121,16 @@ static ssize_t dp_aux_cmd_fifo_tx(struct
>>> dp_aux_private *aux,
>>>>          if (ret < 0)
>>>>                  return ret;
>>>>
>>>> -       time_left = wait_for_completion_timeout(&aux->comp,
>>>> +       if (!poll) {
>>>> +               time_left = wait_for_completion_timeout(&aux->comp,
>>>>                                                  msecs_to_jiffies(250));
>>>> -       if (!time_left)
>>>> -               return -ETIMEDOUT;
>>>> +               if (!time_left)
>>>> +                       return -ETIMEDOUT;
>>>> +       } else {
>>>> +               ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux-
>>catalog);
>>>> +               if (!ret)
>>>> +                       dp_aux_isr(&aux->dp_aux);
>>>> +       }
>>>>
>>>>          return ret;
>>>>   }
>>>> @@ -238,7 +244,7 @@ static void
>>> dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
>>>>    */
>>>>   static void dp_aux_transfer_helper(struct dp_aux_private *aux,
>>>>                                     struct drm_dp_aux_msg *input_msg,
>>>> -                                  bool send_seg)
>>>> +                                  bool send_seg, bool poll)
>>>>   {
>>>>          struct drm_dp_aux_msg helper_msg;
>>>>          u32 message_size = 0x10;
>>>> @@ -278,7 +284,7 @@ static void dp_aux_transfer_helper(struct
>>> dp_aux_private *aux,
>>>>                  helper_msg.address = segment_address;
>>>>                  helper_msg.buffer = &aux->segment;
>>>>                  helper_msg.size = 1;
>>>> -               dp_aux_cmd_fifo_tx(aux, &helper_msg);
>>>> +               dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>>>          }
>>>>
>>>>          /*
>>>> @@ -292,7 +298,7 @@ static void dp_aux_transfer_helper(struct
>>> dp_aux_private *aux,
>>>>          helper_msg.address = input_msg->address;
>>>>          helper_msg.buffer = &aux->offset;
>>>>          helper_msg.size = 1;
>>>> -       dp_aux_cmd_fifo_tx(aux, &helper_msg);
>>>> +       dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
>>>>
>>>>   end:
>>>>          aux->offset += message_size; @@ -300,6 +306,122 @@ static
>>>> void dp_aux_transfer_helper(struct
>>> dp_aux_private *aux,
>>>>                  aux->segment = 0x0; /* reset segment at end of
>>>> block */  }
>>>>
>>>> +/*
>>>> + * This function does the real job to process an AUX transaction.
>>>> + * It will call aux_reset() function to reset the AUX channel,
>>>> + * if the waiting is timeout.
>>>> + */
>>>> +static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
>>>> +                              struct drm_dp_aux_msg *msg) {
>>>> +       ssize_t ret;
>>>> +       int const aux_cmd_native_max = 16;
>>>> +       int const aux_cmd_i2c_max = 128;
>>>> +       struct dp_aux_private *aux;
>>>> +
>>>> +       aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
>>>> +
>>>> +       aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
>>>> + DP_AUX_NATIVE_READ);
>>>> +
>>>> +       /* Ignore address only message */
>>>> +       if (msg->size == 0 || !msg->buffer) {
>>>> +               msg->reply = aux->native ?
>>>> +                       DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
>>>> +               return msg->size;
>>>> +       }
>>>> +
>>>> +       /* msg sanity check */
>>>> +       if ((aux->native && msg->size > aux_cmd_native_max) ||
>>>> +           msg->size > aux_cmd_i2c_max) {
>>>> +               DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
>>>> +                       __func__, msg->size, msg->request);
>>>> +               return -EINVAL;
>>>> +       }
>>>> +
>>>> +       mutex_lock(&aux->mutex);
>>>> +       if (!aux->initted) {
>>>> +               ret = -EIO;
>>>> +               goto exit;
>>>> +       }
>>>> +
>>>> +       /*
>>>> +        * For eDP it's important to give a reasonably long wait here for HPD
>>>> +        * to be asserted. This is because the panel driver may have _just_
>>>> +        * turned on the panel and then tried to do an AUX transfer. The
>panel
>>>> +        * driver has no way of knowing when the panel is ready, so it's up
>>>> +        * to us to wait. For DP we never get into this situation so let's
>>>> +        * avoid ever doing the extra long wait for DP.
>>>> +        */
>>>> +       if (aux->is_edp) {
>>>> +               ret = dp_catalog_aux_wait_for_hpd_connect_state(aux-
>>catalog);
>>>> +               if (ret) {
>>>> +                       DRM_DEBUG_DP("Panel not ready for aux transactions\n");
>>>> +                       goto exit;
>>>> +               }
>>>> +       }
>>>> +
>>>> +       dp_aux_update_offset_and_segment(aux, msg);
>>>> +       dp_aux_transfer_helper(aux, msg, true, true);
>>>> +
>>>> +       aux->read = msg->request & (DP_AUX_I2C_READ &
>>> DP_AUX_NATIVE_READ);
>>>> +       aux->cmd_busy = true;
>>>> +
>>>> +       if (aux->read) {
>>>> +               aux->no_send_addr = true;
>>>> +               aux->no_send_stop = false;
>>>> +       } else {
>>>> +               aux->no_send_addr = true;
>>>> +               aux->no_send_stop = true;
>>>> +       }
>>>> +
>>>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, true);
>>>> +
>>>> +       /* TODO: why is fifo_rx necessary here?
>>>> +        * Ideally fifo_rx need not be executed for an aux write
>>>> +        */
>>>> +       ret = dp_aux_cmd_fifo_rx(aux, msg);
>>>> +
>>>> +       if (ret < 0) {
>>>> +               if (aux->native) {
>>>> +                       aux->retry_cnt++;
>>>> +                       if (!(aux->retry_cnt % MAX_AUX_RETRIES))
>>>> +                               dp_catalog_aux_update_cfg(aux->catalog);
>>>> +               }
>>>> +               /* reset aux if link is in connected state */
>>>> +               if (dp_catalog_link_is_connected(aux->catalog))
>>>> +                       dp_catalog_aux_reset(aux->catalog);
>>>> +       } else {
>>>> +               aux->retry_cnt = 0;
>>>> +               switch (aux->aux_error_num) {
>>>> +               case DP_AUX_ERR_NONE:
>>>> +                       if (aux->read)
>>>> +                               ret = dp_aux_cmd_fifo_rx(aux, msg);
>>>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK :
>>> DP_AUX_I2C_REPLY_ACK;
>>>> +                       break;
>>>> +               case DP_AUX_ERR_DEFER:
>>>> +                       msg->reply = aux->native ?
>>>> +                               DP_AUX_NATIVE_REPLY_DEFER :
>>> DP_AUX_I2C_REPLY_DEFER;
>>>> +                       break;
>>>> +               case DP_AUX_ERR_PHY:
>>>> +               case DP_AUX_ERR_ADDR:
>>>> +               case DP_AUX_ERR_NACK:
>>>> +               case DP_AUX_ERR_NACK_DEFER:
>>>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK :
>>> DP_AUX_I2C_REPLY_NACK;
>>>> +                       break;
>>>> +               case DP_AUX_ERR_TOUT:
>>>> +                       ret = -ETIMEDOUT;
>>>> +                       break;
>>>> +               }
>>>> +       }
>>>> +
>>>> +       aux->cmd_busy = false;
>>>> +
>>>> +exit:
>>>> +       mutex_unlock(&aux->mutex);
>>>> +
>>>> +       return ret;
>>>> +}
>>>> +
>>>>   /*
>>>>    * This function does the real job to process an AUX transaction.
>>>>    * It will call aux_reset() function to reset the AUX channel, @@
>>>> -355,7 +477,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>>> *dp_aux,
>>>>          }
>>>>
>>>>          dp_aux_update_offset_and_segment(aux, msg);
>>>> -       dp_aux_transfer_helper(aux, msg, true);
>>>> +       dp_aux_transfer_helper(aux, msg, true, false);
>>>>
>>>>          aux->read = msg->request & (DP_AUX_I2C_READ &
>>> DP_AUX_NATIVE_READ);
>>>>          aux->cmd_busy = true;
>>>> @@ -368,7 +490,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>>> *dp_aux,
>>>>                  aux->no_send_stop = true;
>>>>          }
>>>>
>>>> -       ret = dp_aux_cmd_fifo_tx(aux, msg);
>>>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, false);
>>>>          if (ret < 0) {
>>>>                  if (aux->native) {
>>>>                          aux->retry_cnt++; @@ -535,6 +657,15 @@
>>>> struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
>*catalog,
>>>>          aux->catalog = catalog;
>>>>          aux->retry_cnt = 0;
>>>>
>>>> +       /*
>>>> +        * Use the drm_dp_aux_init() to use the aux adapter
>>>> +        * before registering aux with the DRM device.
>>>> +        */
>>>> +       aux->dp_aux.name = "dpu_dp_aux";
>>>> +       aux->dp_aux.dev = dev;
>>>> +       aux->dp_aux.transfer = dp_aux_transfer_init;
>>>> +       drm_dp_aux_init(&aux->dp_aux);
>>>
>>> How do you use the aux adapter? It should not be used before
>>> aux->drm_dev is setup.
>>>
>>
>> The drm_dev registration happens during the bind. But we need to use aux
>during probe.
>>
>> The kernel doc for the drm_dp_aux_init function suggested we can use
>> the adapter before drm_dev registration. So, I used this function to enable
>the aux usage during probe.
>
>Then please also change __drm_printk() to use (drm) ? (drm->dev) : NULL as
>a first argument to dev_##level##type. Otherwise the first AUX transfer error
>before aux->drm_dev is set will oops the kernel. See how
>drm_err() is expanded.
>

Okay, will add this also.

>>
>> /**
>>   * drm_dp_aux_init() - minimally initialise an aux channel
>>   * @aux: DisplayPort AUX channel
>>   *
>>   * If you need to use the drm_dp_aux's i2c adapter prior to registering it
>with
>>   * the outside world, call drm_dp_aux_init() first.
>>
>>>> +
>>>>          return &aux->dp_aux;
>>>>   }
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
>>>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
>>>> index 676279d0ca8d..ccf0400176f0 100644
>>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
>>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
>>>> @@ -258,6 +258,18 @@ int
>>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>>> *dp_catalog)
>>>>                                  2000, 500000);  }
>>>>
>>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>>>> +*dp_catalog) {
>>>> +       u32 aux;
>>>> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
>>>> +                               struct dp_catalog_private,
>>>> +dp_catalog);
>>>> +
>>>> +       return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
>>>> +                               REG_DP_INTR_STATUS,
>>>> +                               aux, aux & DP_INTERRUPT_STATUS1,
>>>> +                               250, 250000); }
>>>> +
>>>>   static void dump_regs(void __iomem *base, int len)  {
>>>>          int i;
>>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
>>>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
>>>> index 1f717f45c115..ad4a9e0f71f2 100644
>>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.h
>>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
>>>> @@ -87,6 +87,7 @@ void dp_catalog_aux_enable(struct dp_catalog
>>>> *dp_catalog, bool enable);  void dp_catalog_aux_update_cfg(struct
>>>> dp_catalog *dp_catalog);  int
>>>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
>>>> *dp_catalog);
>>>>   u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
>>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
>>>> +*dp_catalog);
>>>>
>>>>   /* DP Controller APIs */
>>>>   void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
>>>> state); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>>>> b/drivers/gpu/drm/msm/dp/dp_display.c
>>>> index bde1a7ce442f..a5dcef040b74 100644
>>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>>>> @@ -275,13 +275,6 @@ static int dp_display_bind(struct device *dev,
>struct
>>> device *master,
>>>>          dp->dp_display.drm_dev = drm;
>>>>          priv->dp[dp->id] = &dp->dp_display;
>>>>
>>>> -       rc = dp->parser->parse(dp->parser);
>>>> -       if (rc) {
>>>> -               DRM_ERROR("device tree parsing failed\n");
>>>> -               goto end;
>>>> -       }
>>>> -
>>>> -
>>>>          dp->drm_dev = drm;
>>>>          dp->aux->drm_dev = drm;
>>>>          rc = dp_aux_register(dp->aux); @@ -290,12 +283,6 @@ static int
>>>> dp_display_bind(struct device *dev, struct device *master,
>>>>                  goto end;
>>>>          }
>>>>
>>>> -       rc = dp_power_client_init(dp->power);
>>>> -       if (rc) {
>>>> -               DRM_ERROR("Power client create failed\n");
>>>> -               goto end;
>>>> -       }
>>>> -
>>>>          rc = dp_register_audio_driver(dev, dp->audio);
>>>>          if (rc) {
>>>>                  DRM_ERROR("Audio registration Dp failed\n"); @@ -787,6
>>>> +774,12 @@ static int dp_init_sub_modules(struct dp_display_private
>*dp)
>>>>                  goto error;
>>>>          }
>>>>
>>>> +       rc = dp->parser->parse(dp->parser);
>>>> +       if (rc) {
>>>> +               DRM_ERROR("device tree parsing failed\n");
>>>> +               goto error;
>>>> +       }
>>>> +
>>>>          dp->catalog = dp_catalog_get(dev, &dp->parser->io);
>>>>          if (IS_ERR(dp->catalog)) {
>>>>                  rc = PTR_ERR(dp->catalog); @@ -803,6 +796,12 @@ static
>>>> int dp_init_sub_modules(struct dp_display_private *dp)
>>>>                  goto error;
>>>>          }
>>>>
>>>> +       rc = dp_power_client_init(dp->power);
>>>> +       if (rc) {
>>>> +               DRM_ERROR("Power client create failed\n");
>>>> +               goto error;
>>>> +       }
>>>> +
>>>>          dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
>>>>          if (IS_ERR(dp->aux)) {
>>>>                  rc = PTR_ERR(dp->aux); @@ -1338,12 +1337,29 @@ static
>>>> int dp_display_probe(struct platform_device *pdev)
>>>>
>>>>          platform_set_drvdata(pdev, &dp->dp_display);
>>>>
>>>> +       if (dp->dp_display.is_edp) {
>>>> +               dp_display_host_init(dp);
>>>> +               dp_display_host_phy_init(dp);
>>>> +               dp_catalog_ctrl_hpd_config(dp->catalog);
>>>> +
>>>> +               rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);
>>>
>>> You should pass a real done_probing handler here, if you are going to
>refactor
>>> this piece of code. The done_probing should then shut down the
>resources
>>> and bind the component.
>>>
>>
>> I removed the resource enabling part from probe in the next patch where I
>implemented pm_runtime_ops.
>> I moved the host_init, phy_init and hpd_config into runtime_resume and
>calling pm_runtime_get_sync from aux_transfer.
>
>Next patch doesn't exist at this point. So, please, either reorder them,
>or make this patch correct per se.
>
>Also, the key part is a call to component_add(). It should come from
>done_probing callback. AUX bus probing is asynchronous. The kernel
>registers a device and then it might take some time for the correct
>driver to be loaded, etc. We clearly expect dp_display_bind to be used
>only when the panel has been probed.
>


Okay, will add the done_probe function

>>
>>>> +
>>>> +               dp_display_host_phy_exit(dp);
>>>> +               dp_display_host_deinit(dp);
>>>> +
>>>> +               if (rc) {
>>>> +                       DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
>>>> +                       goto error;
>>>> +               }
>>>> +       }
>>>> +
>>>>          rc = component_add(&pdev->dev, &dp_display_comp_ops);
>>>>          if (rc) {
>>>>                  DRM_ERROR("component add failed, rc=%d\n", rc);
>>>>                  dp_display_deinit_sub_modules(dp);
>>>>          }
>>>>
>>>> +error:
>>>>          return rc;
>>>>   }
>>>>
>>>> @@ -1546,40 +1562,8 @@ static int dp_display_get_next_bridge(struct
>>>> msm_dp *dp)  {
>>>>          int rc;
>>>>          struct dp_display_private *dp_priv;
>>>> -       struct device_node *aux_bus;
>>>> -       struct device *dev;
>>>>
>>>>          dp_priv = container_of(dp, struct dp_display_private, dp_display);
>>>> -       dev = &dp_priv->pdev->dev;
>>>> -       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>>>> -
>>>> -       if (aux_bus && dp->is_edp) {
>>>> -               dp_display_host_init(dp_priv);
>>>> -               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
>>>> -               dp_display_host_phy_init(dp_priv);
>>>> -               enable_irq(dp_priv->irq);
>>>> -
>>>> -               /*
>>>> -                * The code below assumes that the panel will finish probing
>>>> -                * by the time devm_of_dp_aux_populate_ep_devices()
>returns.
>>>> -                * This isn't a great assumption since it will fail if the
>>>> -                * panel driver is probed asynchronously but is the best we
>>>> -                * can do without a bigger driver reorganization.
>>>> -                */
>>>> -               rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
>>>> -               of_node_put(aux_bus);
>>>> -               if (rc)
>>>> -                       goto error;
>>>> -
>>>> -               rc = devm_add_action_or_reset(dp->drm_dev->dev,
>>>> -                                               of_dp_aux_depopulate_bus_void,
>>>> -                                               dp_priv->aux);
>>>> -               if (rc)
>>>> -                       goto error;
>>>> -       } else if (dp->is_edp) {
>>>> -               DRM_ERROR("eDP aux_bus not found\n");
>>>> -               return -ENODEV;
>>>> -       }
>>>>
>>>>          /*
>>>>           * External bridges are mandatory for eDP interfaces: one has
>>>> to @@ -1597,12 +1581,6 @@ static int dp_display_get_next_bridge(struct
>>> msm_dp *dp)
>>>>                  return 0;
>>>>          }
>>>>
>>>> -error:
>>>> -       if (dp->is_edp) {
>>>> -               disable_irq(dp_priv->irq);
>>>> -               dp_display_host_phy_exit(dp_priv);
>>>> -               dp_display_host_deinit(dp_priv);
>>>> -       }
>>>>          return rc;
>>>>   }
>>>>
>>>> --
>>>> 2.39.0
>>>>
>>>
>>>
>>> --
>>> With best wishes
>>> Dmitry
>
>--
>With best wishes
>Dmitry
Dmitry Baryshkov March 14, 2023, 11:34 a.m. UTC | #5
On Tue, 14 Mar 2023 at 12:23, Sankeerth Billakanti (QUIC)
<quic_sbillaka@quicinc.com> wrote:
>
> Hi Dmitry,
>
> >>>>
> >>>> The eDP panel is identified and enumerated during probe of the
> >>>> panel-edp driver. The current DP driver triggers this panel-edp
> >>>> driver probe while getting the panel-bridge associated with the eDP
> >>>> panel from the platform driver bind. If the panel-edp probe is
> >>>> deferred, then the whole bunch of MDSS parent and child drivers have
> >>>> to defer and
> >>> roll back.
> >>>
> >>> No, MDSS has not been rolled back since 5.19. Please shift your
> >>> development on top of the current msm-next.
> >>>
> >>
> >> Okay, I will move to the msm-next tip.
> >>
> >>>>
> >>>> So, we want to move the panel enumeration from bind to probe so that
> >>>> the probe defer is easier to handle and also both the drivers appear
> >>>> consistent in panel enumeration. This change moves the DP driver
> >>>> panel-bridge enumeration to probe.
> >>>>
> >>>> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> >>>> ---
> >>>>   drivers/gpu/drm/msm/dp/dp_aux.c     | 149
> >>> ++++++++++++++++++++++++++--
> >>>>   drivers/gpu/drm/msm/dp/dp_catalog.c |  12 +++
> >>>>   drivers/gpu/drm/msm/dp/dp_catalog.h |   1 +
> >>>>   drivers/gpu/drm/msm/dp/dp_display.c |  80 ++++++---------
> >>>>   4 files changed, 182 insertions(+), 60 deletions(-)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
> >>>> b/drivers/gpu/drm/msm/dp/dp_aux.c index
> >cc3efed593aa..5da95dfdeede
> >>>> 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> >>>> @@ -110,7 +110,7 @@ static ssize_t dp_aux_write(struct
> >>>> dp_aux_private *aux,  }
> >>>>
> >>>>   static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
> >>>> -                             struct drm_dp_aux_msg *msg)
> >>>> +                             struct drm_dp_aux_msg *msg, bool poll)
> >>>
> >>> What is the reason for working in polled mode rather than always
> >>> using the interrupts?
> >>>
> >>
> >> The mdss interrupts will be enabled and can be used after msm_irq_install
> >from msm_drm_bind.
> >> We want to perform aux transactions during probe. The aux data
> >> transmission is followed by an interrupt to indicate successful transmission
> >status and reply information.
> >
> >This is the price of developing on, let me guess, 5.15. Nowadays MDSS
> >interrupts are enabled and can be used during dp_display_probe() and
> >dp_display_bind(). If they can not for some reason, this is an issue that must
> >be fixed. Please reconsider your approach after rebasing onto msm-next or
> >6.3-rc1.
> >
>
> On the msm-next also, I see the mdss irq is enabled from bind (in msm_drv.c).
> msm_drm_bind -> msm_drm_init -> msm_irq_install

MDSS IRQ domain is registered from mdss_probe() -> msm_mdss_init() ->
_msm_mdss_irq_domain_add().

Please note the difference between MDSS IRQs (handled by MDSS) vs
MDP/DPU irq (registered by msm_irq_install()).

> Currently, interrupts will not be available during the dp_display_probe.

I can not agree with you here.

> Is there a patch series which is enabling IRQs during mdss probe?

https://patchwork.freedesktop.org/series/98525/, merged for 5.19.

>
> >>
> >> As interrupts are not enabled, I took this polling approach for aux interrupts
> >during probe.
> >>
> >>>>   {
> >>>>          ssize_t ret;
> >>>>          unsigned long time_left;
> >>>> @@ -121,10 +121,16 @@ static ssize_t dp_aux_cmd_fifo_tx(struct
> >>> dp_aux_private *aux,
> >>>>          if (ret < 0)
> >>>>                  return ret;
> >>>>
> >>>> -       time_left = wait_for_completion_timeout(&aux->comp,
> >>>> +       if (!poll) {
> >>>> +               time_left = wait_for_completion_timeout(&aux->comp,
> >>>>                                                  msecs_to_jiffies(250));
> >>>> -       if (!time_left)
> >>>> -               return -ETIMEDOUT;
> >>>> +               if (!time_left)
> >>>> +                       return -ETIMEDOUT;
> >>>> +       } else {
> >>>> +               ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux-
> >>catalog);
> >>>> +               if (!ret)
> >>>> +                       dp_aux_isr(&aux->dp_aux);
> >>>> +       }
> >>>>
> >>>>          return ret;
> >>>>   }
> >>>> @@ -238,7 +244,7 @@ static void
> >>> dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
> >>>>    */
> >>>>   static void dp_aux_transfer_helper(struct dp_aux_private *aux,
> >>>>                                     struct drm_dp_aux_msg *input_msg,
> >>>> -                                  bool send_seg)
> >>>> +                                  bool send_seg, bool poll)
> >>>>   {
> >>>>          struct drm_dp_aux_msg helper_msg;
> >>>>          u32 message_size = 0x10;
> >>>> @@ -278,7 +284,7 @@ static void dp_aux_transfer_helper(struct
> >>> dp_aux_private *aux,
> >>>>                  helper_msg.address = segment_address;
> >>>>                  helper_msg.buffer = &aux->segment;
> >>>>                  helper_msg.size = 1;
> >>>> -               dp_aux_cmd_fifo_tx(aux, &helper_msg);
> >>>> +               dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
> >>>>          }
> >>>>
> >>>>          /*
> >>>> @@ -292,7 +298,7 @@ static void dp_aux_transfer_helper(struct
> >>> dp_aux_private *aux,
> >>>>          helper_msg.address = input_msg->address;
> >>>>          helper_msg.buffer = &aux->offset;
> >>>>          helper_msg.size = 1;
> >>>> -       dp_aux_cmd_fifo_tx(aux, &helper_msg);
> >>>> +       dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
> >>>>
> >>>>   end:
> >>>>          aux->offset += message_size; @@ -300,6 +306,122 @@ static
> >>>> void dp_aux_transfer_helper(struct
> >>> dp_aux_private *aux,
> >>>>                  aux->segment = 0x0; /* reset segment at end of
> >>>> block */  }
> >>>>
> >>>> +/*
> >>>> + * This function does the real job to process an AUX transaction.
> >>>> + * It will call aux_reset() function to reset the AUX channel,
> >>>> + * if the waiting is timeout.
> >>>> + */
> >>>> +static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
> >>>> +                              struct drm_dp_aux_msg *msg) {
> >>>> +       ssize_t ret;
> >>>> +       int const aux_cmd_native_max = 16;
> >>>> +       int const aux_cmd_i2c_max = 128;
> >>>> +       struct dp_aux_private *aux;
> >>>> +
> >>>> +       aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> >>>> +
> >>>> +       aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
> >>>> + DP_AUX_NATIVE_READ);
> >>>> +
> >>>> +       /* Ignore address only message */
> >>>> +       if (msg->size == 0 || !msg->buffer) {
> >>>> +               msg->reply = aux->native ?
> >>>> +                       DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> >>>> +               return msg->size;
> >>>> +       }
> >>>> +
> >>>> +       /* msg sanity check */
> >>>> +       if ((aux->native && msg->size > aux_cmd_native_max) ||
> >>>> +           msg->size > aux_cmd_i2c_max) {
> >>>> +               DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
> >>>> +                       __func__, msg->size, msg->request);
> >>>> +               return -EINVAL;
> >>>> +       }
> >>>> +
> >>>> +       mutex_lock(&aux->mutex);
> >>>> +       if (!aux->initted) {
> >>>> +               ret = -EIO;
> >>>> +               goto exit;
> >>>> +       }
> >>>> +
> >>>> +       /*
> >>>> +        * For eDP it's important to give a reasonably long wait here for HPD
> >>>> +        * to be asserted. This is because the panel driver may have _just_
> >>>> +        * turned on the panel and then tried to do an AUX transfer. The
> >panel
> >>>> +        * driver has no way of knowing when the panel is ready, so it's up
> >>>> +        * to us to wait. For DP we never get into this situation so let's
> >>>> +        * avoid ever doing the extra long wait for DP.
> >>>> +        */
> >>>> +       if (aux->is_edp) {
> >>>> +               ret = dp_catalog_aux_wait_for_hpd_connect_state(aux-
> >>catalog);
> >>>> +               if (ret) {
> >>>> +                       DRM_DEBUG_DP("Panel not ready for aux transactions\n");
> >>>> +                       goto exit;
> >>>> +               }
> >>>> +       }
> >>>> +
> >>>> +       dp_aux_update_offset_and_segment(aux, msg);
> >>>> +       dp_aux_transfer_helper(aux, msg, true, true);
> >>>> +
> >>>> +       aux->read = msg->request & (DP_AUX_I2C_READ &
> >>> DP_AUX_NATIVE_READ);
> >>>> +       aux->cmd_busy = true;
> >>>> +
> >>>> +       if (aux->read) {
> >>>> +               aux->no_send_addr = true;
> >>>> +               aux->no_send_stop = false;
> >>>> +       } else {
> >>>> +               aux->no_send_addr = true;
> >>>> +               aux->no_send_stop = true;
> >>>> +       }
> >>>> +
> >>>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, true);
> >>>> +
> >>>> +       /* TODO: why is fifo_rx necessary here?
> >>>> +        * Ideally fifo_rx need not be executed for an aux write
> >>>> +        */
> >>>> +       ret = dp_aux_cmd_fifo_rx(aux, msg);
> >>>> +
> >>>> +       if (ret < 0) {
> >>>> +               if (aux->native) {
> >>>> +                       aux->retry_cnt++;
> >>>> +                       if (!(aux->retry_cnt % MAX_AUX_RETRIES))
> >>>> +                               dp_catalog_aux_update_cfg(aux->catalog);
> >>>> +               }
> >>>> +               /* reset aux if link is in connected state */
> >>>> +               if (dp_catalog_link_is_connected(aux->catalog))
> >>>> +                       dp_catalog_aux_reset(aux->catalog);
> >>>> +       } else {
> >>>> +               aux->retry_cnt = 0;
> >>>> +               switch (aux->aux_error_num) {
> >>>> +               case DP_AUX_ERR_NONE:
> >>>> +                       if (aux->read)
> >>>> +                               ret = dp_aux_cmd_fifo_rx(aux, msg);
> >>>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK :
> >>> DP_AUX_I2C_REPLY_ACK;
> >>>> +                       break;
> >>>> +               case DP_AUX_ERR_DEFER:
> >>>> +                       msg->reply = aux->native ?
> >>>> +                               DP_AUX_NATIVE_REPLY_DEFER :
> >>> DP_AUX_I2C_REPLY_DEFER;
> >>>> +                       break;
> >>>> +               case DP_AUX_ERR_PHY:
> >>>> +               case DP_AUX_ERR_ADDR:
> >>>> +               case DP_AUX_ERR_NACK:
> >>>> +               case DP_AUX_ERR_NACK_DEFER:
> >>>> +                       msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK :
> >>> DP_AUX_I2C_REPLY_NACK;
> >>>> +                       break;
> >>>> +               case DP_AUX_ERR_TOUT:
> >>>> +                       ret = -ETIMEDOUT;
> >>>> +                       break;
> >>>> +               }
> >>>> +       }
> >>>> +
> >>>> +       aux->cmd_busy = false;
> >>>> +
> >>>> +exit:
> >>>> +       mutex_unlock(&aux->mutex);
> >>>> +
> >>>> +       return ret;
> >>>> +}
> >>>> +
> >>>>   /*
> >>>>    * This function does the real job to process an AUX transaction.
> >>>>    * It will call aux_reset() function to reset the AUX channel, @@
> >>>> -355,7 +477,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
> >>> *dp_aux,
> >>>>          }
> >>>>
> >>>>          dp_aux_update_offset_and_segment(aux, msg);
> >>>> -       dp_aux_transfer_helper(aux, msg, true);
> >>>> +       dp_aux_transfer_helper(aux, msg, true, false);
> >>>>
> >>>>          aux->read = msg->request & (DP_AUX_I2C_READ &
> >>> DP_AUX_NATIVE_READ);
> >>>>          aux->cmd_busy = true;
> >>>> @@ -368,7 +490,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
> >>> *dp_aux,
> >>>>                  aux->no_send_stop = true;
> >>>>          }
> >>>>
> >>>> -       ret = dp_aux_cmd_fifo_tx(aux, msg);
> >>>> +       ret = dp_aux_cmd_fifo_tx(aux, msg, false);
> >>>>          if (ret < 0) {
> >>>>                  if (aux->native) {
> >>>>                          aux->retry_cnt++; @@ -535,6 +657,15 @@
> >>>> struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
> >*catalog,
> >>>>          aux->catalog = catalog;
> >>>>          aux->retry_cnt = 0;
> >>>>
> >>>> +       /*
> >>>> +        * Use the drm_dp_aux_init() to use the aux adapter
> >>>> +        * before registering aux with the DRM device.
> >>>> +        */
> >>>> +       aux->dp_aux.name = "dpu_dp_aux";
> >>>> +       aux->dp_aux.dev = dev;
> >>>> +       aux->dp_aux.transfer = dp_aux_transfer_init;
> >>>> +       drm_dp_aux_init(&aux->dp_aux);
> >>>
> >>> How do you use the aux adapter? It should not be used before
> >>> aux->drm_dev is setup.
> >>>
> >>
> >> The drm_dev registration happens during the bind. But we need to use aux
> >during probe.
> >>
> >> The kernel doc for the drm_dp_aux_init function suggested we can use
> >> the adapter before drm_dev registration. So, I used this function to enable
> >the aux usage during probe.
> >
> >Then please also change __drm_printk() to use (drm) ? (drm->dev) : NULL as
> >a first argument to dev_##level##type. Otherwise the first AUX transfer error
> >before aux->drm_dev is set will oops the kernel. See how
> >drm_err() is expanded.
> >
>
> Okay, will add this also.

Good.

>
> >>
> >> /**
> >>   * drm_dp_aux_init() - minimally initialise an aux channel
> >>   * @aux: DisplayPort AUX channel
> >>   *
> >>   * If you need to use the drm_dp_aux's i2c adapter prior to registering it
> >with
> >>   * the outside world, call drm_dp_aux_init() first.
> >>
> >>>> +
> >>>>          return &aux->dp_aux;
> >>>>   }
> >>>>
> >>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> index 676279d0ca8d..ccf0400176f0 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> @@ -258,6 +258,18 @@ int
> >>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
> >>> *dp_catalog)
> >>>>                                  2000, 500000);  }
> >>>>
> >>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
> >>>> +*dp_catalog) {
> >>>> +       u32 aux;
> >>>> +       struct dp_catalog_private *catalog = container_of(dp_catalog,
> >>>> +                               struct dp_catalog_private,
> >>>> +dp_catalog);
> >>>> +
> >>>> +       return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
> >>>> +                               REG_DP_INTR_STATUS,
> >>>> +                               aux, aux & DP_INTERRUPT_STATUS1,
> >>>> +                               250, 250000); }
> >>>> +
> >>>>   static void dump_regs(void __iomem *base, int len)  {
> >>>>          int i;
> >>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> index 1f717f45c115..ad4a9e0f71f2 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> @@ -87,6 +87,7 @@ void dp_catalog_aux_enable(struct dp_catalog
> >>>> *dp_catalog, bool enable);  void dp_catalog_aux_update_cfg(struct
> >>>> dp_catalog *dp_catalog);  int
> >>>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
> >>>> *dp_catalog);
> >>>>   u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
> >>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
> >>>> +*dp_catalog);
> >>>>
> >>>>   /* DP Controller APIs */
> >>>>   void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
> >>>> state); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> b/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> index bde1a7ce442f..a5dcef040b74 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> @@ -275,13 +275,6 @@ static int dp_display_bind(struct device *dev,
> >struct
> >>> device *master,
> >>>>          dp->dp_display.drm_dev = drm;
> >>>>          priv->dp[dp->id] = &dp->dp_display;
> >>>>
> >>>> -       rc = dp->parser->parse(dp->parser);
> >>>> -       if (rc) {
> >>>> -               DRM_ERROR("device tree parsing failed\n");
> >>>> -               goto end;
> >>>> -       }
> >>>> -
> >>>> -
> >>>>          dp->drm_dev = drm;
> >>>>          dp->aux->drm_dev = drm;
> >>>>          rc = dp_aux_register(dp->aux); @@ -290,12 +283,6 @@ static int
> >>>> dp_display_bind(struct device *dev, struct device *master,
> >>>>                  goto end;
> >>>>          }
> >>>>
> >>>> -       rc = dp_power_client_init(dp->power);
> >>>> -       if (rc) {
> >>>> -               DRM_ERROR("Power client create failed\n");
> >>>> -               goto end;
> >>>> -       }
> >>>> -
> >>>>          rc = dp_register_audio_driver(dev, dp->audio);
> >>>>          if (rc) {
> >>>>                  DRM_ERROR("Audio registration Dp failed\n"); @@ -787,6
> >>>> +774,12 @@ static int dp_init_sub_modules(struct dp_display_private
> >*dp)
> >>>>                  goto error;
> >>>>          }
> >>>>
> >>>> +       rc = dp->parser->parse(dp->parser);
> >>>> +       if (rc) {
> >>>> +               DRM_ERROR("device tree parsing failed\n");
> >>>> +               goto error;
> >>>> +       }
> >>>> +
> >>>>          dp->catalog = dp_catalog_get(dev, &dp->parser->io);
> >>>>          if (IS_ERR(dp->catalog)) {
> >>>>                  rc = PTR_ERR(dp->catalog); @@ -803,6 +796,12 @@ static
> >>>> int dp_init_sub_modules(struct dp_display_private *dp)
> >>>>                  goto error;
> >>>>          }
> >>>>
> >>>> +       rc = dp_power_client_init(dp->power);
> >>>> +       if (rc) {
> >>>> +               DRM_ERROR("Power client create failed\n");
> >>>> +               goto error;
> >>>> +       }
> >>>> +
> >>>>          dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
> >>>>          if (IS_ERR(dp->aux)) {
> >>>>                  rc = PTR_ERR(dp->aux); @@ -1338,12 +1337,29 @@ static
> >>>> int dp_display_probe(struct platform_device *pdev)
> >>>>
> >>>>          platform_set_drvdata(pdev, &dp->dp_display);
> >>>>
> >>>> +       if (dp->dp_display.is_edp) {
> >>>> +               dp_display_host_init(dp);
> >>>> +               dp_display_host_phy_init(dp);
> >>>> +               dp_catalog_ctrl_hpd_config(dp->catalog);
> >>>> +
> >>>> +               rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);
> >>>
> >>> You should pass a real done_probing handler here, if you are going to
> >refactor
> >>> this piece of code. The done_probing should then shut down the
> >resources
> >>> and bind the component.
> >>>
> >>
> >> I removed the resource enabling part from probe in the next patch where I
> >implemented pm_runtime_ops.
> >> I moved the host_init, phy_init and hpd_config into runtime_resume and
> >calling pm_runtime_get_sync from aux_transfer.
> >
> >Next patch doesn't exist at this point. So, please, either reorder them,
> >or make this patch correct per se.
> >
> >Also, the key part is a call to component_add(). It should come from
> >done_probing callback. AUX bus probing is asynchronous. The kernel
> >registers a device and then it might take some time for the correct
> >driver to be loaded, etc. We clearly expect dp_display_bind to be used
> >only when the panel has been probed.
> >
>
>
> Okay, will add the done_probe function

Thank you.

>
> >>
> >>>> +
> >>>> +               dp_display_host_phy_exit(dp);
> >>>> +               dp_display_host_deinit(dp);
> >>>> +
> >>>> +               if (rc) {
> >>>> +                       DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
> >>>> +                       goto error;
> >>>> +               }
> >>>> +       }
> >>>> +
> >>>>          rc = component_add(&pdev->dev, &dp_display_comp_ops);
> >>>>          if (rc) {
> >>>>                  DRM_ERROR("component add failed, rc=%d\n", rc);
> >>>>                  dp_display_deinit_sub_modules(dp);
> >>>>          }
> >>>>
> >>>> +error:
> >>>>          return rc;
> >>>>   }
> >>>>
> >>>> @@ -1546,40 +1562,8 @@ static int dp_display_get_next_bridge(struct
> >>>> msm_dp *dp)  {
> >>>>          int rc;
> >>>>          struct dp_display_private *dp_priv;
> >>>> -       struct device_node *aux_bus;
> >>>> -       struct device *dev;
> >>>>
> >>>>          dp_priv = container_of(dp, struct dp_display_private, dp_display);
> >>>> -       dev = &dp_priv->pdev->dev;
> >>>> -       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
> >>>> -
> >>>> -       if (aux_bus && dp->is_edp) {
> >>>> -               dp_display_host_init(dp_priv);
> >>>> -               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
> >>>> -               dp_display_host_phy_init(dp_priv);
> >>>> -               enable_irq(dp_priv->irq);
> >>>> -
> >>>> -               /*
> >>>> -                * The code below assumes that the panel will finish probing
> >>>> -                * by the time devm_of_dp_aux_populate_ep_devices()
> >returns.
> >>>> -                * This isn't a great assumption since it will fail if the
> >>>> -                * panel driver is probed asynchronously but is the best we
> >>>> -                * can do without a bigger driver reorganization.
> >>>> -                */
> >>>> -               rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
> >>>> -               of_node_put(aux_bus);
> >>>> -               if (rc)
> >>>> -                       goto error;
> >>>> -
> >>>> -               rc = devm_add_action_or_reset(dp->drm_dev->dev,
> >>>> -                                               of_dp_aux_depopulate_bus_void,
> >>>> -                                               dp_priv->aux);
> >>>> -               if (rc)
> >>>> -                       goto error;
> >>>> -       } else if (dp->is_edp) {
> >>>> -               DRM_ERROR("eDP aux_bus not found\n");
> >>>> -               return -ENODEV;
> >>>> -       }
> >>>>
> >>>>          /*
> >>>>           * External bridges are mandatory for eDP interfaces: one has
> >>>> to @@ -1597,12 +1581,6 @@ static int dp_display_get_next_bridge(struct
> >>> msm_dp *dp)
> >>>>                  return 0;
> >>>>          }
> >>>>
> >>>> -error:
> >>>> -       if (dp->is_edp) {
> >>>> -               disable_irq(dp_priv->irq);
> >>>> -               dp_display_host_phy_exit(dp_priv);
> >>>> -               dp_display_host_deinit(dp_priv);
> >>>> -       }
> >>>>          return rc;
> >>>>   }
> >>>>
> >>>> --
> >>>> 2.39.0
> >>>>
> >>>
> >>>
> >>> --
> >>> With best wishes
> >>> Dmitry
> >
> >--
> >With best wishes
> >Dmitry
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index cc3efed593aa..5da95dfdeede 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -110,7 +110,7 @@  static ssize_t dp_aux_write(struct dp_aux_private *aux,
 }
 
 static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
-			      struct drm_dp_aux_msg *msg)
+			      struct drm_dp_aux_msg *msg, bool poll)
 {
 	ssize_t ret;
 	unsigned long time_left;
@@ -121,10 +121,16 @@  static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
 	if (ret < 0)
 		return ret;
 
-	time_left = wait_for_completion_timeout(&aux->comp,
+	if (!poll) {
+		time_left = wait_for_completion_timeout(&aux->comp,
 						msecs_to_jiffies(250));
-	if (!time_left)
-		return -ETIMEDOUT;
+		if (!time_left)
+			return -ETIMEDOUT;
+	} else {
+		ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux->catalog);
+		if (!ret)
+			dp_aux_isr(&aux->dp_aux);
+	}
 
 	return ret;
 }
@@ -238,7 +244,7 @@  static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
  */
 static void dp_aux_transfer_helper(struct dp_aux_private *aux,
 				   struct drm_dp_aux_msg *input_msg,
-				   bool send_seg)
+				   bool send_seg, bool poll)
 {
 	struct drm_dp_aux_msg helper_msg;
 	u32 message_size = 0x10;
@@ -278,7 +284,7 @@  static void dp_aux_transfer_helper(struct dp_aux_private *aux,
 		helper_msg.address = segment_address;
 		helper_msg.buffer = &aux->segment;
 		helper_msg.size = 1;
-		dp_aux_cmd_fifo_tx(aux, &helper_msg);
+		dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
 	}
 
 	/*
@@ -292,7 +298,7 @@  static void dp_aux_transfer_helper(struct dp_aux_private *aux,
 	helper_msg.address = input_msg->address;
 	helper_msg.buffer = &aux->offset;
 	helper_msg.size = 1;
-	dp_aux_cmd_fifo_tx(aux, &helper_msg);
+	dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
 
 end:
 	aux->offset += message_size;
@@ -300,6 +306,122 @@  static void dp_aux_transfer_helper(struct dp_aux_private *aux,
 		aux->segment = 0x0; /* reset segment at end of block */
 }
 
+/*
+ * This function does the real job to process an AUX transaction.
+ * It will call aux_reset() function to reset the AUX channel,
+ * if the waiting is timeout.
+ */
+static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
+			       struct drm_dp_aux_msg *msg)
+{
+	ssize_t ret;
+	int const aux_cmd_native_max = 16;
+	int const aux_cmd_i2c_max = 128;
+	struct dp_aux_private *aux;
+
+	aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
+
+	aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+
+	/* Ignore address only message */
+	if (msg->size == 0 || !msg->buffer) {
+		msg->reply = aux->native ?
+			DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+		return msg->size;
+	}
+
+	/* msg sanity check */
+	if ((aux->native && msg->size > aux_cmd_native_max) ||
+	    msg->size > aux_cmd_i2c_max) {
+		DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
+			__func__, msg->size, msg->request);
+		return -EINVAL;
+	}
+
+	mutex_lock(&aux->mutex);
+	if (!aux->initted) {
+		ret = -EIO;
+		goto exit;
+	}
+
+	/*
+	 * For eDP it's important to give a reasonably long wait here for HPD
+	 * to be asserted. This is because the panel driver may have _just_
+	 * turned on the panel and then tried to do an AUX transfer. The panel
+	 * driver has no way of knowing when the panel is ready, so it's up
+	 * to us to wait. For DP we never get into this situation so let's
+	 * avoid ever doing the extra long wait for DP.
+	 */
+	if (aux->is_edp) {
+		ret = dp_catalog_aux_wait_for_hpd_connect_state(aux->catalog);
+		if (ret) {
+			DRM_DEBUG_DP("Panel not ready for aux transactions\n");
+			goto exit;
+		}
+	}
+
+	dp_aux_update_offset_and_segment(aux, msg);
+	dp_aux_transfer_helper(aux, msg, true, true);
+
+	aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+	aux->cmd_busy = true;
+
+	if (aux->read) {
+		aux->no_send_addr = true;
+		aux->no_send_stop = false;
+	} else {
+		aux->no_send_addr = true;
+		aux->no_send_stop = true;
+	}
+
+	ret = dp_aux_cmd_fifo_tx(aux, msg, true);
+
+	/* TODO: why is fifo_rx necessary here?
+	 * Ideally fifo_rx need not be executed for an aux write
+	 */
+	ret = dp_aux_cmd_fifo_rx(aux, msg);
+
+	if (ret < 0) {
+		if (aux->native) {
+			aux->retry_cnt++;
+			if (!(aux->retry_cnt % MAX_AUX_RETRIES))
+				dp_catalog_aux_update_cfg(aux->catalog);
+		}
+		/* reset aux if link is in connected state */
+		if (dp_catalog_link_is_connected(aux->catalog))
+			dp_catalog_aux_reset(aux->catalog);
+	} else {
+		aux->retry_cnt = 0;
+		switch (aux->aux_error_num) {
+		case DP_AUX_ERR_NONE:
+			if (aux->read)
+				ret = dp_aux_cmd_fifo_rx(aux, msg);
+			msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+			break;
+		case DP_AUX_ERR_DEFER:
+			msg->reply = aux->native ?
+				DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
+			break;
+		case DP_AUX_ERR_PHY:
+		case DP_AUX_ERR_ADDR:
+		case DP_AUX_ERR_NACK:
+		case DP_AUX_ERR_NACK_DEFER:
+			msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK : DP_AUX_I2C_REPLY_NACK;
+			break;
+		case DP_AUX_ERR_TOUT:
+			ret = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	aux->cmd_busy = false;
+
+exit:
+	mutex_unlock(&aux->mutex);
+
+	return ret;
+}
+
 /*
  * This function does the real job to process an AUX transaction.
  * It will call aux_reset() function to reset the AUX channel,
@@ -355,7 +477,7 @@  static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
 	}
 
 	dp_aux_update_offset_and_segment(aux, msg);
-	dp_aux_transfer_helper(aux, msg, true);
+	dp_aux_transfer_helper(aux, msg, true, false);
 
 	aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
 	aux->cmd_busy = true;
@@ -368,7 +490,7 @@  static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
 		aux->no_send_stop = true;
 	}
 
-	ret = dp_aux_cmd_fifo_tx(aux, msg);
+	ret = dp_aux_cmd_fifo_tx(aux, msg, false);
 	if (ret < 0) {
 		if (aux->native) {
 			aux->retry_cnt++;
@@ -535,6 +657,15 @@  struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
 	aux->catalog = catalog;
 	aux->retry_cnt = 0;
 
+	/*
+	 * Use the drm_dp_aux_init() to use the aux adapter
+	 * before registering aux with the DRM device.
+	 */
+	aux->dp_aux.name = "dpu_dp_aux";
+	aux->dp_aux.dev = dev;
+	aux->dp_aux.transfer = dp_aux_transfer_init;
+	drm_dp_aux_init(&aux->dp_aux);
+
 	return &aux->dp_aux;
 }
 
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
index 676279d0ca8d..ccf0400176f0 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.c
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -258,6 +258,18 @@  int dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog *dp_catalog)
 				2000, 500000);
 }
 
+int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog *dp_catalog)
+{
+	u32 aux;
+	struct dp_catalog_private *catalog = container_of(dp_catalog,
+				struct dp_catalog_private, dp_catalog);
+
+	return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
+				REG_DP_INTR_STATUS,
+				aux, aux & DP_INTERRUPT_STATUS1,
+				250, 250000);
+}
+
 static void dump_regs(void __iomem *base, int len)
 {
 	int i;
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h b/drivers/gpu/drm/msm/dp/dp_catalog.h
index 1f717f45c115..ad4a9e0f71f2 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.h
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
@@ -87,6 +87,7 @@  void dp_catalog_aux_enable(struct dp_catalog *dp_catalog, bool enable);
 void dp_catalog_aux_update_cfg(struct dp_catalog *dp_catalog);
 int dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog *dp_catalog);
 u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
+int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog *dp_catalog);
 
 /* DP Controller APIs */
 void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32 state);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index bde1a7ce442f..a5dcef040b74 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -275,13 +275,6 @@  static int dp_display_bind(struct device *dev, struct device *master,
 	dp->dp_display.drm_dev = drm;
 	priv->dp[dp->id] = &dp->dp_display;
 
-	rc = dp->parser->parse(dp->parser);
-	if (rc) {
-		DRM_ERROR("device tree parsing failed\n");
-		goto end;
-	}
-
-
 	dp->drm_dev = drm;
 	dp->aux->drm_dev = drm;
 	rc = dp_aux_register(dp->aux);
@@ -290,12 +283,6 @@  static int dp_display_bind(struct device *dev, struct device *master,
 		goto end;
 	}
 
-	rc = dp_power_client_init(dp->power);
-	if (rc) {
-		DRM_ERROR("Power client create failed\n");
-		goto end;
-	}
-
 	rc = dp_register_audio_driver(dev, dp->audio);
 	if (rc) {
 		DRM_ERROR("Audio registration Dp failed\n");
@@ -787,6 +774,12 @@  static int dp_init_sub_modules(struct dp_display_private *dp)
 		goto error;
 	}
 
+	rc = dp->parser->parse(dp->parser);
+	if (rc) {
+		DRM_ERROR("device tree parsing failed\n");
+		goto error;
+	}
+
 	dp->catalog = dp_catalog_get(dev, &dp->parser->io);
 	if (IS_ERR(dp->catalog)) {
 		rc = PTR_ERR(dp->catalog);
@@ -803,6 +796,12 @@  static int dp_init_sub_modules(struct dp_display_private *dp)
 		goto error;
 	}
 
+	rc = dp_power_client_init(dp->power);
+	if (rc) {
+		DRM_ERROR("Power client create failed\n");
+		goto error;
+	}
+
 	dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
 	if (IS_ERR(dp->aux)) {
 		rc = PTR_ERR(dp->aux);
@@ -1338,12 +1337,29 @@  static int dp_display_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &dp->dp_display);
 
+	if (dp->dp_display.is_edp) {
+		dp_display_host_init(dp);
+		dp_display_host_phy_init(dp);
+		dp_catalog_ctrl_hpd_config(dp->catalog);
+
+		rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);
+
+		dp_display_host_phy_exit(dp);
+		dp_display_host_deinit(dp);
+
+		if (rc) {
+			DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
+			goto error;
+		}
+	}
+
 	rc = component_add(&pdev->dev, &dp_display_comp_ops);
 	if (rc) {
 		DRM_ERROR("component add failed, rc=%d\n", rc);
 		dp_display_deinit_sub_modules(dp);
 	}
 
+error:
 	return rc;
 }
 
@@ -1546,40 +1562,8 @@  static int dp_display_get_next_bridge(struct msm_dp *dp)
 {
 	int rc;
 	struct dp_display_private *dp_priv;
-	struct device_node *aux_bus;
-	struct device *dev;
 
 	dp_priv = container_of(dp, struct dp_display_private, dp_display);
-	dev = &dp_priv->pdev->dev;
-	aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
-
-	if (aux_bus && dp->is_edp) {
-		dp_display_host_init(dp_priv);
-		dp_catalog_ctrl_hpd_config(dp_priv->catalog);
-		dp_display_host_phy_init(dp_priv);
-		enable_irq(dp_priv->irq);
-
-		/*
-		 * The code below assumes that the panel will finish probing
-		 * by the time devm_of_dp_aux_populate_ep_devices() returns.
-		 * This isn't a great assumption since it will fail if the
-		 * panel driver is probed asynchronously but is the best we
-		 * can do without a bigger driver reorganization.
-		 */
-		rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
-		of_node_put(aux_bus);
-		if (rc)
-			goto error;
-
-		rc = devm_add_action_or_reset(dp->drm_dev->dev,
-						of_dp_aux_depopulate_bus_void,
-						dp_priv->aux);
-		if (rc)
-			goto error;
-	} else if (dp->is_edp) {
-		DRM_ERROR("eDP aux_bus not found\n");
-		return -ENODEV;
-	}
 
 	/*
 	 * External bridges are mandatory for eDP interfaces: one has to
@@ -1597,12 +1581,6 @@  static int dp_display_get_next_bridge(struct msm_dp *dp)
 		return 0;
 	}
 
-error:
-	if (dp->is_edp) {
-		disable_irq(dp_priv->irq);
-		dp_display_host_phy_exit(dp_priv);
-		dp_display_host_deinit(dp_priv);
-	}
 	return rc;
 }