| Message ID | 20230314162720.759220-1-arnd@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | fbdev: omapfb: remove omap1 osk driver | expand |
On 3/14/23 17:27, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > Commit 21a3e6eed423 ("ARM: omap1: remove osk-mistral add-on board > support") removed the platform_device definition for the "lcd_osk" > device, so this driver is now unused and can be removed as well. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> applied. Thanks! Helge > --- > drivers/video/fbdev/omap/Makefile | 1 - > drivers/video/fbdev/omap/lcd_osk.c | 86 ------------------------------ > 2 files changed, 87 deletions(-) > delete mode 100644 drivers/video/fbdev/omap/lcd_osk.c > > diff --git a/drivers/video/fbdev/omap/Makefile b/drivers/video/fbdev/omap/Makefile > index 504edb9c09dd..6d5082c76919 100644 > --- a/drivers/video/fbdev/omap/Makefile > +++ b/drivers/video/fbdev/omap/Makefile > @@ -18,7 +18,6 @@ objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o > > lcds-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o > lcds-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o > -lcds-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o > > lcds-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o > > diff --git a/drivers/video/fbdev/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c > deleted file mode 100644 > index 8168ba0d47fd..000000000000 > --- a/drivers/video/fbdev/omap/lcd_osk.c > +++ /dev/null > @@ -1,86 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * LCD panel support for the TI OMAP OSK board > - * > - * Copyright (C) 2004 Nokia Corporation > - * Author: Imre Deak <imre.deak@nokia.com> > - * Adapted for OSK by <dirk.behme@de.bosch.com> > - */ > - > -#include <linux/module.h> > -#include <linux/platform_device.h> > -#include <linux/gpio.h> > - > -#include <linux/soc/ti/omap1-io.h> > -#include <linux/soc/ti/omap1-mux.h> > - > -#include "omapfb.h" > - > -static int osk_panel_enable(struct lcd_panel *panel) > -{ > - /* configure PWL pin */ > - omap_cfg_reg(PWL); > - > - /* Enable PWL unit */ > - omap_writeb(0x01, OMAP_PWL_CLK_ENABLE); > - > - /* Set PWL level */ > - omap_writeb(0xFF, OMAP_PWL_ENABLE); > - > - /* set GPIO2 high (lcd power enabled) */ > - gpio_set_value(2, 1); > - > - return 0; > -} > - > -static void osk_panel_disable(struct lcd_panel *panel) > -{ > - /* Set PWL level to zero */ > - omap_writeb(0x00, OMAP_PWL_ENABLE); > - > - /* Disable PWL unit */ > - omap_writeb(0x00, OMAP_PWL_CLK_ENABLE); > - > - /* set GPIO2 low */ > - gpio_set_value(2, 0); > -} > - > -static struct lcd_panel osk_panel = { > - .name = "osk", > - .config = OMAP_LCDC_PANEL_TFT, > - > - .bpp = 16, > - .data_lines = 16, > - .x_res = 240, > - .y_res = 320, > - .pixel_clock = 12500, > - .hsw = 40, > - .hfp = 40, > - .hbp = 72, > - .vsw = 1, > - .vfp = 1, > - .vbp = 0, > - .pcd = 12, > - > - .enable = osk_panel_enable, > - .disable = osk_panel_disable, > -}; > - > -static int osk_panel_probe(struct platform_device *pdev) > -{ > - omapfb_register_panel(&osk_panel); > - return 0; > -} > - > -static struct platform_driver osk_panel_driver = { > - .probe = osk_panel_probe, > - .driver = { > - .name = "lcd_osk", > - }, > -}; > - > -module_platform_driver(osk_panel_driver); > - > -MODULE_AUTHOR("Imre Deak"); > -MODULE_DESCRIPTION("LCD panel support for the TI OMAP OSK board"); > -MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/Makefile b/drivers/video/fbdev/omap/Makefile index 504edb9c09dd..6d5082c76919 100644 --- a/drivers/video/fbdev/omap/Makefile +++ b/drivers/video/fbdev/omap/Makefile @@ -18,7 +18,6 @@ objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o lcds-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o lcds-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o -lcds-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o lcds-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o diff --git a/drivers/video/fbdev/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c deleted file mode 100644 index 8168ba0d47fd..000000000000 --- a/drivers/video/fbdev/omap/lcd_osk.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * LCD panel support for the TI OMAP OSK board - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak <imre.deak@nokia.com> - * Adapted for OSK by <dirk.behme@de.bosch.com> - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <linux/soc/ti/omap1-io.h> -#include <linux/soc/ti/omap1-mux.h> - -#include "omapfb.h" - -static int osk_panel_enable(struct lcd_panel *panel) -{ - /* configure PWL pin */ - omap_cfg_reg(PWL); - - /* Enable PWL unit */ - omap_writeb(0x01, OMAP_PWL_CLK_ENABLE); - - /* Set PWL level */ - omap_writeb(0xFF, OMAP_PWL_ENABLE); - - /* set GPIO2 high (lcd power enabled) */ - gpio_set_value(2, 1); - - return 0; -} - -static void osk_panel_disable(struct lcd_panel *panel) -{ - /* Set PWL level to zero */ - omap_writeb(0x00, OMAP_PWL_ENABLE); - - /* Disable PWL unit */ - omap_writeb(0x00, OMAP_PWL_CLK_ENABLE); - - /* set GPIO2 low */ - gpio_set_value(2, 0); -} - -static struct lcd_panel osk_panel = { - .name = "osk", - .config = OMAP_LCDC_PANEL_TFT, - - .bpp = 16, - .data_lines = 16, - .x_res = 240, - .y_res = 320, - .pixel_clock = 12500, - .hsw = 40, - .hfp = 40, - .hbp = 72, - .vsw = 1, - .vfp = 1, - .vbp = 0, - .pcd = 12, - - .enable = osk_panel_enable, - .disable = osk_panel_disable, -}; - -static int osk_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&osk_panel); - return 0; -} - -static struct platform_driver osk_panel_driver = { - .probe = osk_panel_probe, - .driver = { - .name = "lcd_osk", - }, -}; - -module_platform_driver(osk_panel_driver); - -MODULE_AUTHOR("Imre Deak"); -MODULE_DESCRIPTION("LCD panel support for the TI OMAP OSK board"); -MODULE_LICENSE("GPL");